Service-oriented infrastructure to support the control, monitoring and management of a shop floor system

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Exposição a ozono em cabinas de avião

RESUMO - O ozono é o principal componente da poluição fotoquímica do ar. Como agente irritante do aparelho respiratório, os seus efeitos sobre a saúde caracterizam-se, essencialmente, por tosse, dispneia, desconforto torácico e alterações da função pulmonar, encontrando-se também associadas à exposição ambiental a O3 tanto uma maior frequência e gravidade de crises de asma como a ocorrência de quadros clínicos de irritação conjuntival. É sobretudo a partir dos anos 50, com a descoberta de concentrações elevadas de ozono em ambientes de trabalho respeitantes à actividade de soldadura «a arco», que aquele gás passa a ser encarado como factor profissional de risco. No início dos anos 60 surgem os primeiros estudos de exposição a O3 em cabinas de avião, suscitados pela ocorrência, em tripulantes e passageiros, de queixas clínicas de irritação do tracto respiratório. Esta sintomatologia era, até então, atribuída à acção de outros factores, designadamente o sistema de ventilação e o baixo teor de humidade do ar. Posteriormente, alguns estudos revelaram que, em voos comerciais subsónicos, os teores elevados de O3 observados no interior das cabinas poderiam ser provocados pela sua insuficiente destruição nos sistemas de entrada de ar.O presente estudo, efectuado em voos de longo curso realizados em aeronaves Airbus A340-300 numa única rota comercial, teve por objectivo avaliar a exposição a ozono no ar interior em cabina de avião. Os teores médios de concentração de ozono observados foram inferiores aos valores susceptíveis de provocarem efeitos adversos sobre o aparelho respiratório. Como valor máximo instantâneo, foi atingida a concentração de 152 ppb. Adicionalmente, foi constatada a influência das estações do ano nos teores de O3. O conjunto dos resultados obtidos permite concluir que as concentrações de ozono no ar interior nas cabinas de avião estudadas são inferiores às correspondentes concentrações máximas admissíveis, tendo, em todos os voos, sido observado o cumprimento da norma da FAA respeitante à protecção da exposição ao ozono em cabinas de aeronaves de aviação comercial.

Exposição profissional ao chumbo : análise da indução de efeitos genotóxicos

RESUMO - A exposição contínua a substâncias químicas tem consequências para a saúde humana, algumas das quais não estão ainda totalmente estabelecidas. A toxicologia ocupacional é uma área interdisciplinar que envolve conhecimentos de higiene e de medicina ocupacional, de epidemiologia e de toxicologia e que tem por principal objectivo prevenir a ocorrência de efeitos adversos decorrentes do ambiente ocupacional sendo um dos seus principais papéis fornecer o máximo de dados que possam contribuir para o conhecimento dos potenciais efeitos na saúde. O chumbo é um tóxico de características cumulativas que provoca na saúde efeitos principalmente sistémicos, ou seja, o efeito tóxico manifesta-se em locais afastados do contacto inicial que resultam essencialmente de exposições crónicas, resultantes de períodos de exposição mais ou menos longos ao metal (entre meses e anos). Pode interagir com diferentes órgãos e tecidos, ligando-se a moléculas e constituintes celulares. Uma vez que não possui qualquer função fisiológica, a presença do chumbo no organismo humano resulta numa série de efeitos prejudiciais que afectam diversos órgãos e sistemas. A toxicidade do chumbo manifesta-se em diversos órgãos e tecidos, nomeadamente no sistema hematopoiético, no sistema nervoso, no rim, no aparelho reprodutor, no sistema cardiovascular, no sistema endócrino e no sistema imunitário. Da interferência do chumbo com o funcionamento de alguns sistemas biológicos resultam um conjunto de alterações fundamentais ao nível dos processos de transporte através das membranas, da integridade estrutural e funcional das enzimas e de várias vias metabólicas, em especial da fosforilação oxidativa e da síntese do heme sendo os primeiros efeitos bioquímicos do chumbo detectados a partir de valores de plumbémia inferiores a 10 μg/dL. As medidas de higiene e segurança actualmente em vigor nos países desenvolvidos asseguram que os casos de intoxicação grave são cada vez menos frequentes. No entanto, o risco de exposição a nível ocupacional existe em todas as actividades que envolvem materiais que o contenham como as explorações mineiras, as fundições primária e secundária, a produção de baterias de chumbo ácido, a produção de vidro com pigmentos de chumbo, as soldaduras de reparação automóvel e a instrução de tiro. Desde 2006 o chumbo é considerado pela International Agency for Research on Cancer (IARC) uma substância carcinogénica do grupo 2A (provável carcinogénio para o ser humano). Considera-se, assim, que o chumbo tem, inequivocamente, capacidade de induzir cancro em animais experimentais mas que, embora haja fortes indícios de que os mecanismos que medeiam a carcinogénese desses compostos ocorrem no ser humano, os dados disponíveis ainda não podem assegurar essa relação. Com este estudo pretendeu-se contribuir para o conhecimento da toxicidade do chumbo através do estudo da exposição ao chumbo e da influência da susceptibilidade individual (em industrias sem co-exposição significativa a outros agentes conhecidos ou suspeitos de serem carcinogénicos). Pretendeu-se estudar o caso através de uma abordagem múltipla que permitisse relacionar diferentes tipos de marcadores biológicos uma vez que a monitorização biológica integra todas as possíveis vias de entrada no organismo (para além da via respiratória), eventuais exposições fora do contexto estritamente profissional assim como uma série de factores intrínsecos individuais (relacionados com modos de via, de natureza fisiológica e comportamentais). Sendo a co-exposição a outros compostos com propriedades genotóxicas e carcinogénicas uma questão difícil de tornear quando se quer avaliar o potencial genotóxico do chumbo em populações expostas, ocupacional ou ambientalmente este estudo tem a vantagem de ter sido efectuado em populações sem co-exposição conhecida a outras substâncias deste tipo, permitindo concluir sobre os efeitos resultantes apenas da exposição a chumbo na população humana, contribuindo para explicar algumas das aparentes inconsistências e contradições entre diferentes estudos sobre este tema. Os indicadores de exposição usados foram: indicadores de dose interna (doseamento de chumbo e de PPZ no sangue), indicadores de efeitos adversos no heme e genotóxicos (actividade da ALAD, teste do cometa e mutação em TCR) e indicadores de susceptibilidade (polimorfismos genéticos de ALAD e VDR) através de uma abordagem estatística de comparação directa de sub-grupos previamente definidos na população e da aplicação de um modelo de regressão múltipla. Este estudo revelou que os níveis de plumbémia na população portuguesa baixaram significativamente nos últimos 10 anos, tanto na população ocupacionalmente exposta como na população em geral e que a presença do genótipo B-B (do gene VDR) é preditiva das variações de plumbémia, quando comparada com o genótipo mais frequente na população, B-b; ao contrário, o genótipo b-b não aparenta ter influência em nenhum dos marcadores estudados. No que diz respeito a efeitos genotóxicos concluiu-se que estes não se manifestaram na população estudada, levando a concluir que nos níveis de exposição estudados, o chumbo não tem capacidade de induzir este tipo de efeitos per si levando ao reforço da hipótese, já levantada por outros autores, de que o mecanismo de genotoxicidade do chumbo seja essencialmente de promoção de processos de genotoxicidade desencadeados por outros agentes. A realização de estudos de efeitos genotóxicos e de stress oxidativo desenhados de forma a comparar grupos de trabalhadores expostos apenas a chumbo com grupos de trabalhadores com o mesmo nível de exposição a chumbo, mas com co-exposição a outros agentes reconhecidamente carcinogénicos poderá ajudar a aumentar o conhecimento deste efeito do chumbo na saúde humana.

Novel Cryopreservation Strategies for Cell‐Therapies and Pre‐Clinical Research

The expanding need for complex biologics for therapeutic applications, in‐vitro pharmacology and toxicology studies and fundamental research demands the production of banks of well‐characterized and safety‐tested stocks of a large number of cell/tissue samples. This implies the development of effective cryopreservation methodologies that can cope with process scalability and automation and must reflect the biological and physical properties of the cells as these can be significantly altered by the process.

Enterprise reference lexicon building from business models

Nowadays, a significant increase on the demand for interoperable systems for exchanging data in business collaborative environments has been noticed. Consequently, cooperation agreements between each of the involved enterprises have been brought to light. However, due to the fact that even in a same community or domain, there is a big variety of knowledge representation not semantically coincident, which embodies the existence of interoperability problems in the enterprises information systems that need to be addressed. Moreover, in relation to this, most organizations face other problems about their information systems, as: 1) domain knowledge not being easily accessible by all the stakeholders (even intra-enterprise); 2) domain knowledge not being represented in a standard format; 3) and even if it is available in a standard format, it is not supported by semantic annotations or described using a common and understandable lexicon. This dissertation proposes an approach for the establishment of an enterprise reference lexicon from business models. It addresses the automation in the information models mapping for the reference lexicon construction. It aggregates a formal and conceptual representation of the business domain, with a clear definition of the used lexicon to facilitate an overall understanding by all the involved stakeholders, including non-IT personnel.

A domain specific language for domotic systems

To cope with modernity, the interesting of having a fully automated house has been increasing over the years, as technology evolves and as our lives become more stressful and overloaded. An automation system provides a way to simplify some daily tasks, allowing us to have more spare time to perform activities where we are really needed. There are some systems in this domain that try to implement these characteristics, but this kind of technology is at its early stages of evolution being that it is still far away of empowering the user with the desired control over a habitation. The reason is that the mentioned systems miss some important features such as adaptability, extension and evolution. These systems, developed from a bottom-up approach, are often tailored for programmers and domain experts, discarding most of the times the end users that remain with unfinished interfaces or products that they have difficulty to control. Moreover, complex behaviors are avoided, since they are extremely difficult to implement mostly due to the necessity of handling priorities, conflicts and device calibration. Besides, these solutions are only reachable at very high costs, yet they still have the limitation of being difficult to configure by non-technical people once in runtime operation. As a result, it is necessary to create a tool that allows the execution of several automated actions, with an interface that is easy to use but at the same time supports all the main features of this domain. It is also desirable that this tool is independent of the hardware so it can be reused, thus a Model Driven Development approach (MDD) is the ideal option, as it is a method that follows those principles. Since the automation domain has some very specific concepts, the use of models should be combined with a Domain Specific Language (DSL). With these two methods, it is possible to create a solution that is adapted to the end users, but also to domain experts and programmers due to the several levels of abstraction that can be added to diminish the complexity of use. The aim of this thesis is to design a Domain Specific Language (DSL) that uses the Model Driven Development approach (MDD), with the purpose of supporting Home Automation (HA) concepts. In this implementation, the development of simple and complex scenarios should be supported and will be one of the most important concerns. This DSL should also support other significant features in this domain, such as the ability to schedule tasks, which is something that is limited in the current existing solutions.

Diagnosis of Leishmania (Leishmania) chagasi infection in dogs and the relationship with environmental and sanitary aspects in the municipality of Palmas, state of Tocantins, Brazil

INTRODUCTION: The aim of the present study was to identify the presence of Leishmania (Leishmania) chagasi infection in dogs in the City of Palmas, Tocantins, Brazil, using the PCR technique to list the hot spots of infected dogs in the city and associate their occurrence to significant environmental changes at capture sites. METHODS: DNA was extracted from blood of dogs, and the PCR were performed with primers RV1/RV2. After screening the population studied, the regions of the city that had the highest occurrence of canine infection were detected. These sites were visited, and ecological parameters denoting anthropogenic disturbance were evaluated. RESULTS: Some important features were listed in the regions visited, such as low urbanization, lack of public collection of sewage, limited garbage collection, vacant lots with tall vegetation, decaying organic matter, and, most importantly, the occurrence of stray dogs and poultry in homes. CONCLUSIONS: The methodology for screening the population was very efficient, especially in evaluating a large number of individuals in a short time, with a high degree of automation. The results indicate an association between the observed parameters and the occurrence of infection in dogs. The model presented in the city is ideal for studies of disease progression and expansion and for the evaluation of control measures adopted for canine VL.

Fostering e-participation sustainability through a BPM-driven semantic model

According to a recent Eurobarometer survey (2014), 68% of Europeans tend not to trust national governments. As the increasing alienation of citizens from politics endangers democracy and welfare, governments, practitioners and researchers look for innovative means to engage citizens in policy matters. One of the measures intended to overcome the so-called democratic deficit is the promotion of civic participation. Digital media proliferation offers a set of novel characteristics related to interactivity, ubiquitous connectivity, social networking and inclusiveness that enable new forms of societal-wide collaboration with a potential impact on leveraging participative democracy. Following this trend, e-Participation is an emerging research area that consists in the use of Information and Communication Technologies to mediate and transform the relations among citizens and governments towards increasing citizens’ participation in public decision-making. However, despite the widespread efforts to implement e-Participation through research programs, new technologies and projects, exhaustive studies on the achieved outcomes reveal that it has not yet been successfully incorporated in institutional politics. Given the problems underlying e-Participation implementation, the present research suggested that, rather than project-oriented efforts, the cornerstone for successfully implementing e-Participation in public institutions as a sustainable added-value activity is a systematic organisational planning, embodying the principles of open-governance and open-engagement. It further suggested that BPM, as a management discipline, can act as a catalyst to enable the desired transformations towards value creation throughout the policy-making cycle, including political, organisational and, ultimately, citizen value. Following these findings, the primary objective of this research was to provide an instrumental model to foster e-Participation sustainability across Government and Public Administration towards a participatory, inclusive, collaborative and deliberative democracy. The developed artefact, consisting in an e-Participation Organisational Semantic Model (ePOSM) underpinned by a BPM-steered approach, introduces this vision. This approach to e-Participation was modelled through a semi-formal lightweight ontology stack structured in four sub-ontologies, namely e-Participation Strategy, Organisational Units, Functions and Roles. The ePOSM facilitates e-Participation sustainability by: (1) Promoting a common and cross-functional understanding of the concepts underlying e-Participation implementation and of their articulation that bridges the gap between technical and non-technical users; (2) Providing an organisational model which allows a centralised and consistent roll-out of strategy-driven e-Participation initiatives, supported by operational units dedicated to the execution of transformation projects and participatory processes; (3) Providing a standardised organisational structure, goals, functions and roles related to e-Participation processes that enhances process-level interoperability among government agencies; (4) Providing a representation usable in software development for business processes’ automation, which allows advanced querying using a reasoner or inference engine to retrieve concrete and specific information about the e-Participation processes in place. An evaluation of the achieved outcomes, as well a comparative analysis with existent models, suggested that this innovative approach tackling the organisational planning dimension can constitute a stepping stone to harness e-Participation value.

Methodology for WSN communication technologies automated field tests

Wireless Sensor Networks(WSN) are networks of devices used to sense and act that applies wireless radios to communicate. To achieve a successful implementation of a wireless device it is necessary to take in consideration the existence of a wide variety of radios available, a large number of communication parameters (payload, duty cycle, etc.) and environmental conditions that may affect the device’s behaviour. However, to evaluate a specific radio towards a unique application it might be necessary to conduct trial experiments, with such a vast amount of devices, communication parameters and environmental conditions to take into consideration the number of trial cases generated can be surprisingly high. Thus, making trial experiments to achieve manual validation of wireless communication technologies becomes unsuitable due to the existence of a high number of trial cases on the field. To overcome this technological issue an automated test methodology was introduced, presenting the possibility to acquire data regarding the device’s behaviour when testing several technologies and parameters that care for a specific analysis. Therefore, this method advances the validation and analysis process of the wireless radios and allows the validation to be done without the need of specific and in depth knowledge about wireless devices.

Growth hacking model for B2B saas startups

The following project introduces a model of Growth Hacking strategies for business-tobusiness Software-as-a-Service startups that was developed in collaboration with and applied to a Portuguese startup called Liquid. The work addresses digital marketing channels such as content marketing, email marketing, social marketing and selling. Further, the company’s product, pricing strategy, partnerships and website communication are examined. Applying best case practices, competitor benchmarks and interview insights from numerous industry influencers and experts, areas for improvement are deduced and procedures for each of those channels recommended.

The human eye as human-machine interface

Eye tracking as an interface to operate a computer is under research for a while and new systems are still being developed nowadays that provide some encouragement to those bound to illnesses that incapacitates them to use any other form of interaction with a computer. Although using computer vision processing and a camera, these systems are usually based on head mount technology being considered a contact type system. This paper describes the implementation of a human-computer interface based on a fully non-contact eye tracking vision system in order to allow people with tetraplegia to interface with a computer. As an assistive technology, a graphical user interface with special features was developed including a virtual keyboard to allow user communication, fast access to pre-stored phrases and multimedia and even internet browsing. This system was developed with the focus on low cost, user friendly functionality and user independency and autonomy.

Towards automated test and validation of SIP solutions

IP networks are currently the major communication infrastructure used by an increasing number of applications and heterogeneous services, including voice services. In this context, the Session Initiation Protocol (SIP) is a signaling protocol widely used for controlling multimedia communication sessions such as voice or video calls over IP networks, thus performing vital functions in an extensive set of public and enter- prise solutions. However, the SIP protocol dissemination also entails some challenges, such as the complexity associated with the testing/validation processes of IMS/SIP networks. As a consequence, manual IMS/SIP testing solutions are inherently costly and time consuming tasks, being crucial to develop automated approaches in this specific area. In this perspective, this article presents an experimental approach for automated testing/validation of SIP scenarios in IMS networks. For that purpose, an automation framework is proposed allowing to replicate the configuration of SIP equipment from the pro- duction network and submit such equipment to a battery of tests in the testing network. The proposed solution allows to drastically reduce the test and validation times when compared with traditional manual approaches, also allowing to enhance testing reliability and coverage. The automation framework comprises of some freely available tools which are conveniently integrated with other specific modules implemented within the context of this work. In order to illustrate the advantages of the proposed automated framework, a real case study taken from a PT Inovação customer is presented comparing the time required to perform a manual SIP testing approach with the one time required when using the proposed auto- mated framework. The presented results clearly corroborate the advantages of using the presented framework.

Advances in thermoplastic pultruded composites

Pultrusion is a versatile continuous high speed production technology allowing the production of fibre reinforced complex profiles. Thermosetting resins are normally used as matrices in the production of structural constant cross section profiles. Although only recently thermoplastic matrices have been used in long and continuous fibre reinforced composites replacing with success thermosetting matrices, the number of their applications is increasing due to their better ecological and mechanical performance. Composites with thermoplastic matrices offers increased fracture toughness, higher impact tolerance, short processing cycle time and excellent environmental stability. They are recyclable, post-formable and can be joined by welding. The use of long/continuous fibre reinforced thermoplastic matrix composites involves, however, great technological and scientific challenges since thermoplastics present much higher viscosity than thermosettings, which makes much difficult and complex the impregnation of reinforcements and consolidation tasks. In this work continuous fibres reinforced thermoplastic matrix towpregs were produced using equipment developed by the Institute for Polymers and Composites (IPC). The processing of the towpregs was made by pultrusion, in a developed prototype equipment existing in the Engineering School of the Polytechnic Institute of Porto (ISEP). Different thermoplastic matrices and fibres raw-materials were used in this study to manufacture pultruded composites for commercial applications (glass and carbon fibre/ polypropylene) and for advanced markets (carbon fibre/Primospire®). To improve the temperature distribution profile in heating die, different modifications were performed. In order to optimize both processes, towpregs production and pultruded composites profiles were analysed to determine the influence of the most relevant processing arameters in the final properties. The final pultruded composite profiles were submitted to mechanical tests to obtain the relevant properties.

Refinement and variability techniques in model transformation of software requirements

Tese de Doutoramento em Tecnologias e Sistemas de Informação

Estudo, desenvolvimento de manuais de utilização e colocação em funcionamento da bancada SIMATIC da Siemens

Dissertação de mestrado em Engenharia Mecatrónica