Aplicação do fomesafen via água de irrigação por aspersão no controle de Euphorbia heterophylla

A aplicação de herbicidas via água de irrigação (herbigação) por aspersão, especialmente por pivô central, vem crescendo no Brasil. O objetivo deste estudo foi investigar a eficácia de doses de fomesafen aplicado via água de irrigação por aspersão no controle de Euphorbia heterophylla. Os tratamentos foram dispostos no esquema fatorial (4 x 3 x 2) + 3, sendo quatro doses do fomesafen (60, 120, 180 e 240 g ha-1), três estádios de desenvolvimento de E. heterophylla (1, 7 e 14 dias após a emergência - DAE), dois métodos de aplicação (pulverização e herbigação) e testemunhas sem herbicida (uma para cada estádio de desenvolvimento da planta daninha). Foi empregado o delineamento inteiramente casualizado, com quatro repetições. Cada unidade experimental constou de um vaso com 4,0 L de solo, onde foram distribuídas 50 sementes dessa planta daninha. A pulverização foi feita com 200 L ha-1 de calda; na herbigação foi usada lâmina de água de 4,72 mm, aplicada por simulador de irrigação. E. heterophylla foi mais suscetível ao fomesafen com 1 DAE. Neste estádio, a herbigação controlou-a melhor que a pulverização nas doses de 180 e 240 g ha-1. Na aplicação aos 7 DAE, geralmente a pulverização foi mais eficaz que a herbigação, mas o controle da planta daninha não foi satisfatório. Aplicado com 14 DAE, o herbicida, independentemente da dose e do método de aplicação, proporcionou controle pobre ou nenhum.

Metolachlor e fomesafen aplicados via irrigação por aspersão em plantio direto e convencional

Objetivou-se com este trabalho avaliar a eficácia do metolachlor e do fomesafen aplicados com água de irrigação (herbigação) no controle de plantas daninhas na cultura do feijão, em plantio direto e convencional. O plantio direto foi implantado sobre palha de milho e de plantas daninhas. No plantio convencional, o preparo de solo foi feito com uma aração e duas gradagens. A variedade de feijão utilizada foi a Pérola, semeada no final de julho. O metolachlor e o fomesafen foram aplicados em pré-emergência e pós-emergência, respectivamente, utilizando um pivô central. O metolachlor (2,4 kg ha-1) foi aplicado com lâminas de água de 5, 10 e 15 mm, e o fomesafen (0,225 kg ha-1), com 3, 6 e 9 mm. Os herbicidas também foram aplicados por pulverização. Foram incluídas duas testemunhas: feijão com e sem capina. Quatro dias antes e quatro dias depois da aplicação do metolachlor foi aplicada lâmina de água de 10 mm em toda a área experimental. A espécie daninha predominante no plantio direto foi Bidens pilosa e, no plantio convencional, Artemisia verlotorum. Outras espécies de plantas daninhas que ocorreram na área experimental foram agrupadas em outras dicotiledôneas e monocotiledôneas. O nível de controle de plantas daninhas foi, em geral, melhor com a herbigação que com a pulverização, independentemente do sistema de plantio. As lâminas de água de 5 ou 10 mm, para o metolachlor, e de 3 ou 6 mm, para o fomesafen, proporcionaram, em geral, os melhores resultados. As produtividades alcançadas no plantio direto foram maiores, em relação ao plantio convencional.

Aplicações seqüenciais de fomesafen via água de irrigação por aspersão no controle de Bidens pilosa

Foi conduzido um ensaio em casa de vegetação com o objetivo de avaliar a eficácia da aplicação seqüencial de pequenas doses do fomesafen por via da água de irrigação (herbigação) por aspersão no controle de Bidens pilosa. Os tratamentos foram dispostos no esquema fatorial 4 x 3 x 2 + 3: doses de fomesafen (50, 100, 150 e 200 g ha-1), seqüências de dias após a emergência (DAE) de B. pilosa em que foram realizadas as aplicações do herbicida (7-14-21, 14-21-28 e 21-28-35 DAE), métodos de aplicação (pulverização e herbigação), mais três testemunhas sem herbicida (uma para cada idade da planta daninha). As três idades de B. pilosa foram conseguidas com a semeadura a intervalos de sete dias. Foi empregado o delineamento inteiramente casualizado, com três repetições. Cada unidade experimental constou de um vaso com 12 L de solo, onde 50 sementes de B. pilosa foram distribuídas. A primeira aplicação, em cada seqüência de dias, foi feita com um quarto da dose; a segunda, com um quarto; e a terceira, com metade da dose. Foi empregado um pulverizador costal de CO2 com volume de calda equivalente a 200 L ha-1. A herbigação foi feita com um simulador de irrigação (4,52 mm ou 45.200 L ha-1). Na pulverização, houve excelente controle da planta daninha com as doses de 100, 150 e 200 g ha-1, independentemente da seqüência de dias da aplicação. Na herbigação, as aplicações seqüenciais foram ineficazes.

Weed control via intercropping with gliricidia: I. cotton crop

The majority of cotton grown commercially in the world has white lint, but recently, there has been a growing interest in colored lint cotton in several countries, including Brazil. The use of naturally-colored fiber reduces chemical pollution. The objective of this paper was to evaluate cotton cultivar fiber yield in response to weed control via intercropping with gliricídia. Cultivars BRS-Verde (greenish fibers), BRS-Rubi (reddish brown fibers), BRS-Safira (brown fibers), and BRS-187 8H (white fibers) were submitted to the following treatments: no hoeing, two hoeings (at 20 and 40 days after transplanting), and cotton intercropped with gliricídia. In the intercropped treatment, gliricídia was planted between rows of cotton plants, using one seedling pit-1, in pits spaced 50.0 cm apart. Twelve weed species predominated in the experiment, many of them belonging to the Poaceae family. Weeds occurred at different frequencies and in a non-uniform manner in the experimental area. Cultivars did not influence weed dry matter. Intercropping with gliricídia reduced weed dry matter but did not prevent reductions in cotton fiber and seed cotton yield, which were higher in hoed plots. Cultivar BRS Safira had the highest fiber yield, but no differences were observed between cultivars regarding to seed cotton yield.

Weed control via intercropping with gliricidia: II. corn crop

A reduction in herbicide use is one of modern agriculture's main interests and several alternatives are being investigated with this objective, including intercropping. Gliricídia (Gliricidia sepium) mulch has no allelopathic effect on corn or beans but significantly decreased the population of some weed species. The objective of this study was to evaluate green ear and grain yield in corn cultivars as a response to weed control achieved via intercropping with gliricidia. A completely randomized block design with five replicates and split-plots was used. Cultivars AG 1051, AG 2060, BRS 2020, and PL 6880 (assigned to plots) were submitted to the following treatments: no hoeing, hoeing (performed at 20 and 40 days after sowing the corn), and corn intercropped with gliricidia. Gliricidia was grown in a transplanting system to ensure uniform germination and fast establishment in the field. Seeding was made in 200-cell trays with one seed per cell (35 mL volume). The plants emerged two to three days after sowing and were transplanted to a permanent site two to three days after emergence. Corn was sown on the same day gliricidia was transplanted. Sixteen weed species occurred at different frequencies, with uneven distribution in the experimental area. Cultivars AG 1051 and AG 2060 were the best with reference to most characteristics employed to evaluate green corn yield. Cultivar AG 1051 provided the highest grain yield. The highest green ear yield and grain yield values were obtained with hoeing. However, the fact that intercropped plots showed intermediate yield between the values obtained for hoed and non-hoed plots indicates that gliricidia was beneficial to corn, and exerted a certain level of weed control.

Nitrogen doses and weed control via intercropping with gliricidia for corn production

Many studies have demonstrated the beneficial influence of nitrogen doses on corn dry grain yield and green ear yield. Due to a growing concern with environmental degradation, many agricultural practices, adopted in the past, are being reexamined. With regard to weed control, strategies that employ mechanical control, including intercrops, are being the object of renewed interest. The purpose of this study was to evaluate the effects of the application of nitrogen doses (0, 40, 80, and 120 kg N ha-1; as ammonium sulfate) and weed control on the growth, green ear yield, and grain yield of the AG 1051 corn cultivar. A randomized block experimental design with split-plots and nine replications was adopted. In addition to nitrogen rates, the AG 1051 cultivar was submitted to the following treatments, applied to subplots: no weeding, two hoeings (at 20 and 40 days after sowing), and intercropping with gliricídia (Gliricidia sepium). Gliricidia was sowed at corn planting, between the corn rows, using two seedlings per pit, in pits spaced 0.30 m apart. Gliricidia did not provide weed control, and gave plant growth, green ear yield and grain yield values similar to the no weeding treatment. However, regarding the number of mature ears got, intercropping with gliricidia did not differ from the two-hoeing treatment. Weed control did not have an effect on plant height and number of marketable, husked green ears, with the application of 120 kg N ha-1; indicating that nitrogen improved the corn's competitive ability. The two-hoeing treatment provided the best means for total green ears weight, number of marketable husked ears, both unhusked and husked marketable ear weight, grain yield and its components than the other treatments. Nitrogen application increased corn growth, green ear yield, and grain yield, as well as weed green biomass, but reduced the stand and growth of gliricidia.

Weed control in corn via intercropping with gliricidia sown by broadcasting

There has been interest in reducing the use of herbicides for weed control in order to decrease environmental degradation problems. The objective of this study was to evaluate the effects of gliricidia planting density sown by broadcasting and intercopping on green ear and corn grain yield as well as on weed control. A randomized block design with split-plots and five replicates were adopted. Cultivars AG 1051, BM 2022, and BM 3061, assigned to plots, were submitted to the following treatments: no hoeing, two hoeings (at 20 and 40 days after sowing), and intercropped with gliricidia sown at densities of 10 and 20 seeds m-2. Thirty weed species occurred in the experiment area, with Cucumis anguria as the most frequent ones. Cultivar BM 2022 was the best for the total number of ears (TNE) and number (NMHE) and weight of marketable husked ears. Together with cultivar AG 1051, this cultivar had the highest total weight and marketable unhusked ear weight (MUEW). However, the cultivars did not differ with respect to grain yield (GY). The highest green ear and corn grain yield and weed control percentages were obtained with two hoeings; in MUEW, NMHE and GY, intercropping provided intermediate means in comparison with those obtained in hoed and non-hoed plots, indicating that gliricidia was partially beneficial to corn. Increased gliricidia seeding density heightened the benefits to corn (TNE and MUEW). The lack of hoeing produced the poorest green ear and grain yields.

Improving internal performance of a company - Introducing employee empowerment via job redesign in Finnish small and medium sized enterprises

This bachelor's thesis is about to find out to what extent Finnish managers and small and medium sized organizations are willing and able to put employee empowerment into practice and what experiences they have got from employee empowerment as an approach towards job redesign. Some of the top enterprises in the world are known for their empowered employees as a single most important factor for their success and this thesis focuses on introducing the subject to Finnish managers and organizations to find out what benefits, barriers and other thoughts they have about the whole idea of empowered employees in Finnish organization culture. Most notable findings in this thesis are that Finnish managers do think that their organization's employees are capable to work efficiently if their job is extended and the organizations would perform better when right person's job is enriched and he/she is given more power to solve problems.

Crescimento do milho com controle de plantas daninhas via consorciação com gliricídia

A consorciação com a gliricídia controla as plantas daninhas do milho. Com o objetivo de entender melhor esse controle, realizou-se uma análise do crescimento do milho em consorciação com a gliricídia. O híbrido duplo AG 1051 foi cultivado com capinas (duas capinas, aos 20 e 40 dias após a semeadura), sem capinas e em consorciação com a gliricídia. Na consorciação, a gliricídia foi semeada a lanço, com 25 sementes viáveis m-2, por ocasião da semeadura do milho, entre as fileiras desta cultura. Utilizou-se o delineamento de blocos completos casualizados com parcelas subdivididas e oito repetições. O controle de plantas daninhas foi aplicado às parcelas, e as 13 coletas da parte aérea das plantas, para avaliação da área foliar e da matéria seca, às subparcelas. As coletas foram feitas de sete em sete dias, a partir dos 14 dias após a semeadura. Pode ser concluído que o controle das plantas daninhas com duas capinas determinou maiores valores na área e matéria seca foliares, bem como na matéria seca total da planta. Nessas características, as plantas das parcelas consorciadas apresentaram comportamento intermediário entre plantas das parcelas capinadas e das não capinadas. Portanto, as plantas daninhas reduzem o crescimento do milho, e a gliricídia provavelmente controla parcialmente o mato, beneficiando o milho. Não houve diferenças entre tratamentos de controle de plantas daninhas nas taxas de crescimento absolutas e relativas, área foliar específica e taxa assimilatória líquida. A maior razão de área foliar foi observada com a consorciação com gliricídia.

EPrints Imports via DOI and ORCID

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Portfolio Selection via Composite Measure Analysis: Evidence from the U.S. Stock Market

The aim of this research is to examine the pricing anomalies existing in the U.S. market during 1986 to 2011. The sample of stocks is divided into decile portfolios based on seven individual valuation ratios (E/P, B/P, S/P, EBIT/EV, EVITDA/EV, D/P, and CE/P) and price momentum to investigate the efficiency of individual valuation ratio and their combinations as portfolio formation criteria. This is the first time in financial literature when CE/P is employed as a constituent of composite value measure. The combinations are based on median scaled composite value measures and TOPSIS method. During the sample period value portfolios significantly outperform both the market portfolio and comparable glamour portfolios. The results show the highest return for the value portfolio that was based on the combination of S/P & CE/P ratios. The outcome of this research will increase the understanding on the suitability of different methodologies for portfolio selection. It will help managers to take advantage of the results of different methodologies in order to gain returns above the market.

Green supplier selection via Multiple Criteria Data Envelopment Analysis

An appropriate supplier selection and its profound effects on increasing the competitive advantage of companies has been widely discussed in supply chain management (SCM) literature. By raising environmental awareness among companies and industries they attach more importance to sustainable and green activities in selection procedures of raw material providers. The current thesis benefits from data envelopment analysis (DEA) technique to evaluate the relative efficiency of suppliers in the presence of carbon dioxide (CO2) emission for green supplier selection. We incorporate the pollution of suppliers as an undesirable output into DEA. However, to do so, two conventional DEA model problems arise: the lack of the discrimination power among decision making units (DMUs) and flexibility of the inputs and outputs weights. To overcome these limitations, we use multiple criteria DEA (MCDEA) as one alternative. By applying MCDEA the number of suppliers which are identified as efficient will be decreased and will lead to a better ranking and selection of the suppliers. Besides, in order to compare the performance of the suppliers with an ideal supplier, a “virtual” best practice supplier is introduced. The presence of the ideal virtual supplier will also increase the discrimination power of the model for a better ranking of the suppliers. Therefore, a new MCDEA model is proposed to simultaneously handle undesirable outputs and virtual DMU. The developed model is applied for green supplier selection problem. A numerical example illustrates the applicability of the proposed model.

Butyrate induces apoptosis in murine macrophages via caspase-3, but independent of autocrine synthesis of tumor necrosis factor and nitric oxide

We demonstrated that 4 mM butyrate induces apoptosis in murine peritoneal macrophages in a dose- and time-dependent manner as indicated by studies of cell viability, flow cytometric analysis of annexin-V binding, DNA ladder pattern and the determination of hypodiploid DNA content. The activity of caspase-3 was enhanced during macrophage apoptosis induced by butyrate and the caspase inhibitor z-VAD-FMK (100 µM) inhibited the butyrate effect, indicating the major role of the caspase cascade in the process. The levels of butyrate-induced apoptosis in macrophages were enhanced by co-treatment with 1 µg/ml bacterial lipopolysaccharide (LPS). However, our data indicate that apoptosis induced by butyrate and LPS involves different mechanisms. Thus, LPS-induced apoptosis was only observed when macrophages were primed with IFN-gamma and was partially dependent on iNOS, TNFR1 and IRF-1 functions as determined in experiments employing macrophages from various knockout mice. In contrast, butyrate-induced macrophage apoptosis was highly independent of IFN-gamma priming and of iNOS, TNFR1 and IRF-1 functions.

Angiotensin II stimulates MCP-1 production in rat glomerular endothelial cells via NAD(P)H oxidase-dependent nuclear factor-kappa B signaling

Angiotensin II (Ang II) plays a crucial role in the pathogenesis of renal diseases. The objective of the present study was to investigate the possible inflammatory effect of Ang II on glomerular endothelial cells and the underlying mechanism. We isolated and characterized primary cultures of rat glomerular endothelial cells (GECs) and observed that Ang II induced the synthesis of monocyte chemoattractant protein-1 (MCP-1) in GECs as demonstrated by Western blot. Ang II stimulation, at concentrations ranging from 0.1 to 10 µm, of rat GECs induced a rapid increase in the generation of reactive oxygen species as indicated by laser fluoroscopy. The level of p47phox protein, an NAD(P)H oxidase subunit, was also increased by Ang II treatment. These effects of Ang II on GECs were all reduced by diphenyleneiodonium (1.0 µm), an NAD(P)H oxidase inhibitor. Ang II stimulation also promoted the activation of nuclear factor-kappa B (NF-κB). Telmisartan (1.0 µm), an AT1 receptor blocker, blocked all the effects of Ang II on rat GECs. These data suggest that the inhibition of NAD(P)H oxidase-dependent NF-κB signaling reduces the increase in MCP-1 production by GECs induced by Ang II. This may provide a mechanistic basis for the benefits of selective AT1 blockade in dealing with chronic renal disease.

An improved in vivo method for atrioventricular node ablation via thoracotomy

The atrioventricular (AV) node is permanently damaged in approximately 3% of congenital heart surgery operations, requiring implantation of a permanent pacemaker. Improvements in pacemaker design and in alternative treatment modalities require an effective in vivo model of complete heart block (CHB) before testing can be performed in humans. Such a model should enable accurate, reliable, and detectable induction of the surgical pathology. Through our laboratory’s efforts in developing a tissue engineering therapy for CHB, we describe here an improved in vivo model for inducing chronic AV block. The method employs a right thoracotomy in the adult rabbit, from which the right atrial appendage may be retracted to expose an access channel for the AV node. A novel injection device was designed, which both physically restricts needle depth and provides electrical information via electrocardiogram interface. This combination of features provides real-time guidance to the researcher for confirming contact with the AV node, and documents its ablation upon formalin injection. While all animals tested could be induced to acute AV block, those with ECG guidance were more likely to maintain chronic heart block >12 h. Our model enables the researcher to reproduce both CHB and the associated peripheral fibrosis that would be present in an open congenital heart surgery, and which would inevitably impact the design and utility of a tissue engineered AV node replacement.