950 resultados para Very-High-Cycle Fatigue
Resumo:
It becomes increasingly difficult to make continuous metal lines with well defined thickness and edges by the lift-off technique as the line width is decreased. We describe in this paper a technique in which the combination of high resolution electron beam lithography and ionized cluster beam (ICB) deposition has enabled very high quality gold lines ({all equal to}25nm wide) to be obtained on thick single crystal silicon substrates. © 1990.
Resumo:
Metallic nanowires have many attractive properties such as ultra-high yield strength and large tensile elongation. However, recent experiments show that metallic nanowires often contain grain boundaries, which are expected to significantly affect mechanical properties. By using molecular dynamics simulations, here, we demonstrate that polycrystalline Cu nanowires exhibit tensile deformation behavior distinctly different from their single-crystal counterparts. A significantly lowered yield strength was observed as a result of dislocation emission from grain boundaries rather than from free surfaces, despite of the very high surface to volume ratio. Necking starts from the grain boundary followed by fracture, resulting in reduced tensile ductility. The high stresses found in the grain boundary region clearly play a dominant role in controlling both inelastic deformation and fracture processes in nanoscale objects. These findings have implications for designing stronger and more ductile structures and devices on nanoscale.
Resumo:
Crack growth due to cavity growth and coalescence along grain boundaries is analyzed under transient and extensive creep conditions in a compact tension specimen. Account is taken of the finite geometry changes accompanying crack tip blunting. The material is characterized as an elastic-power law creeping solid with an additional contribution to the creep rate arising from a given density of cavitating grain boundary facets. All voids are assumed present from the outset and distributed on a given density of cavitating grain boundary facets. The evolution of the stress fields with crack growth under three load histories is described in some detail for a relatively ductile material. The full-field plane strain finite element calculations show the competing effects of stress relaxation due to constrained creep, diffusion and crack tip blunting. and of stress increase due to the instantaneous elastic response to crack growth. At very high crack growth rates the Hui-Riedel fields dominate the crack tip region. However. the high growth rates are not sustained for any length of time in the compact tension geometry analyzed. The region of dominance of the Hui-Riedel field shrinks rapidly so that the near-tip fields are controlled by the HRR-type field shortly after the onset of crack growth. Crack growth rates under various conditions of loading and spanning the range of times from small scale creep to extensive creep are obtained. We show that there is a strong similarity between crack growth history and the behaviour of the C(t) and C(t) parameters. so that crack growth rates correlate rather well with C(t) and C(t). A relatively brittle material is also considered that has a very different near-tip stress field and crack growth history.
Resumo:
During a 1995 aerial video survey of the coastline of Johnstone Strait, an unusual shoreline feature was noted and termed “clam terraces” (inset) because of the terrace-type morphology and the apparent association with high clam productivity on the sandflats. Typical alongshore lengths of the terrace ridges are 20-50m, and across-shore widths are typically 20-40m. An area with an especially high density of clam terraces was noted in the Broughton Archipelago, between Broughton and Gilford Islands of southeastern Queen Charlotte Strait. Clam terraces in this area were inventoried from the aerial video imagery to quantify their distribution. The terraces accounted for over 14 km of shoreline and 365 clam terraces were documented. A three-day field survey by a coastal geomorphologist, archeologist and marine biologist was conducted to document the features and determine their origin. Nine clam terraces were surveyed. The field observations confirmed that: the ridges are comprised of boulder/cobblesized material, ridge crests are typically in the range of 1-1.5m above chart datum, sandflats are comprised almost entirely of shell fragments (barnacles and clams) and sandflats have very high shellfish production. There are an abundance of shell middens in the area (over 175) suggesting that the shellfish associated with the terraces were an important food source of aboriginal peoples. The origin of the ridges is unknown; they appear to be a relict feature in that they are not actively being modified by present-day processes. The ridges may be a relict sea-ice feature, although the mechanics of ridge formation is uncertain. Sand accumulates behind the ridge because the supply rate of the shell fragments exceeds the dispersal rate in these low energy environments. The high density areas of clam terraces correspond to high density areas of shell middens, and it is probable that the clam terraces were subjected to some degree of modification by aboriginal shellfish gatherers over the thousands of years of occupation in the region. (Document contains 39 pages)
Resumo:
8 p.
Resumo:
To be in compliance with the Endangered Species Act and the Marine Mammal Protection Act, the United States Department of the Navy is required to assess the potential environmental impacts of conducting at-sea training operations on sea turtles and marine mammals. Limited recent and area-specific density data of sea turtles and dolphins exist for many of the Navy’s operations areas (OPAREAs), including the Marine Corps Air Station (MCAS) Cherry Point OPAREA, which encompasses portions of Core and Pamlico Sounds, North Carolina. Aerial surveys were conducted to document the seasonal distribution and estimated density of sea turtles and dolphins within Core Sound and portions of Pamlico Sound, and coastal waters extending one mile offshore. Sea Surface Temperature (SST) data for each survey were extracted from 1.4 km/pixel resolution Advanced Very High Resolution Radiometer remote images. A total of 92 turtles and 1,625 dolphins were sighted during 41 aerial surveys, conducted from July 2004 to April 2006. In the spring (March – May; 7.9°C to 21.7°C mean SST), the majority of turtles sighted were along the coast, mainly from the northern Core Banks northward to Cape Hatteras. By the summer (June – Aug.; 25.2°C to 30.8°C mean SST), turtles were fairly evenly dispersed along the entire survey range of the coast and Pamlico Sound, with only a few sightings in Core Sound. In the autumn (Sept. – Nov.; 9.6°C to 29.6°C mean SST), the majority of turtles sighted were along the coast and in eastern Pamlico Sound; however, fewer turtles were observed along the coast than in the summer. No turtles were seen during the winter surveys (Dec. – Feb.; 7.6°C to 11.2°C mean SST). The estimated mean surface density of turtles was highest along the coast in the summer of 2005 (0.615 turtles/km², SE = 0.220). In Core and Pamlico Sounds the highest mean surface density occurred during the autumn of 2005 (0.016 turtles/km², SE = 0.009). The mean seasonal abundance estimates were always highest in the coastal region, except in the winter when turtles were not sighted in either region. For Pamlico Sound, surface densities were always greater in the eastern than western section. The range of mean temperatures at which turtles were sighted was 9.68°C to 30.82°C. The majority of turtles sighted were within water ≥ 11°C. Dolphins were observed within estuarine waters and along the coast year-round; however, there were some general seasonal movements. In particular, during the summer sightings decreased along the coast and dolphins were distributed throughout Core and Pamlico Sounds, while in the winter the majority of dolphins were located along the coast and in southeastern Pamlico Sound. Although relative numbers changed seasonally between these areas, the estimated mean surface density of dolphins was highest along the coast in the spring of 2006 (9.564 dolphins/km², SE = 5.571). In Core and Pamlico Sounds the highest mean surface density occurred during the autumn of 2004 (0.192 dolphins/km², SE = 0.066). The estimated mean surface density of dolphins was lowest along the coast in the summer of 2004 (0.461 dolphins/km², SE = 0.294). The estimated mean surface density of dolphins was lowest in Core and Pamlico Sounds in the summer of 2005 (0.024 dolphins/km², SE = 0.011). In Pamlico Sound, estimated surface densities were greater in the eastern section except in the autumn. Dolphins were sighted throughout the entire range of mean SST (7.60°C to 30.82°C), with a tendency towards fewer dolphins sighted as water temperatures increased. Based on the findings of this study, sea turtles are most likely to be encountered within the OPAREAs when SST is ≥ 11°C. Since sea turtle distributions are generally limited by water temperature, knowing the SST of a given area is a useful predictor of sea turtle presence. Since dolphins were observed within estuarine waters year-round and throughout the entire range of mean SST’s, they likely could be encountered in the OPAREAs any time of the year. Although our findings indicated the greatest number of dolphins to be present in the winter and the least in the summer, their movements also may be related to other factors such as the availability of prey. (PDF contains 28 pages)
Resumo:
Ichthyoplankton was sampled at 14 stations with 60 cm bongo nets fitted with 0.333 mm mesh in basins throughout Florida Bay in 1994-1995. In addition, I compared collections made using an epibenthic sled to those made with standard ichthyoplankton bongo nets at four stations during July 1997-November,1999 to determine ifthe two types of gear are complementary. In 1994-1995, in descending order of abundance, Clupeiformes, Gobiidae, Callionymidae, Sciaenidae, Labrisomidae, Soleidae and Blenniidae dominated the ichthyoplankton. Densities of clupeiforms were generally very high (> 100 larvae 100 m-3) or high (10.0 - 99.9 larvae 100 m-3). Gobiid larvae were ubiquitous with highest densities occurring in waters in close proximity to the Gulf of Mexico (109.7 larvae 100 m-3), lowest in two ofthree eastern Florida Bay stations (<1.0 larva 100 m-3). Spotted seatrout, Cynoscion nebulosus, dominated larval sciaenid collections and the only other sciaenid identified to species was the sand seatrout, Cynoscion arenarius. Taxa differed markedly between collections taken by epibenthic sled and standard ichthyoplankton bongo nets. Taxa collected with standard ichthyoplankton gear were those that spawn in Florida Bay and have pelagic larvae (i.e., engraulids and gobiids). Taxa collected with the sled were small resident species that have benthic larvae (i.e., syngnathids and cyprinodonts) or taxa that spawn outside the bay, but use the bay as a nursery area (i.e., gerreids and haemulids). Recently-settled red drum, Sciaenops ocellatus, were collected with the epibenthic sled in November 1999, although juveniles of this important gamefish are rare in the bay.
Resumo:
As a component of a three-year cooperative effort of the Washington State Department of Ecology and the National Oceanic and Atmospheric Administration, surficial sediment samples from 100 locations in southern Puget Sound were collected in 1999 to determine their relative quality based on measures of toxicity, chemical contamination, and benthic infaunal assemblage structure. The survey encompassed an area of approximately 858 km2, ranging from East and Colvos Passages south to Oakland Bay, and including Hood Canal. Toxic responses were most severe in some of the industrialized waterways of Tacoma’s Commencement Bay. Other industrialized harbors in which sediments induced toxic responses on smaller scales included the Port of Olympia, Oakland Bay at Shelton, Gig Harbor, Port Ludlow, and Port Gamble. Based on the methods selected for this survey, the spatial extent of toxicity for the southern Puget Sound survey area was 0% of the total survey area for amphipod survival, 5.7% for urchin fertilization, 0.2% for microbial bioluminescence, and 5- 38% with the cytochrome P450 HRGS assay. Measurements of trace metals, PAHs, PCBs, chlorinated pesticides, other organic chemicals, and other characteristics of the sediments, indicated that 20 of the 100 samples collected had one or more chemical concentrations that exceeded applicable, effects-based sediment guidelines and/or Washington State standards. Chemical contamination was highest in eight samples collected in or near the industrialized waterways of Commencement Bay. Samples from the Thea Foss and Middle Waterways were primarily contaminated with a mixture of PAHs and trace metals, whereas those from Hylebos Waterway were contaminated with chlorinated organic hydrocarbons. The remaining 12 samples with elevated chemical concentrations primarily had high levels of other chemicals, including bis(2-ethylhexyl) phthalate, benzoic acid, benzyl alcohol, and phenol. The characteristics of benthic infaunal assemblages in south Puget Sound differed considerably among locations and habitat types throughout the study area. In general, many of the small embayments and inlets throughout the study area had infaunal assemblages with relatively low total abundance, taxa richness, evenness, and dominance values, although total abundance values were very high in some cases, typically due to high abundance of one organism such as the polychaete Aphelochaeta sp. N1. The majority of the samples collected from passages, outer embayments, and larger bodies of water tended to have infaunal assemblages with higher total abundance, taxa richness, evenness, and dominance values. Two samples collected in the Port of Olympia near a superfund cleanup site had no living organisms in them. A weight-of-evidence approach used to simultaneously examine all three “sediment quality triad” parameters, identified 11 stations (representing 4.4 km2, 0.5% of the total study area) with sediment toxicity, chemical contamination, and altered benthos (i.e., degraded sediment quality), 36 stations (493.5 km2, 57.5% total study area) with no toxicity or chemical contamination (i.e., high sediment quality), 35 stations (274.1 km2, 32.0% total study area) with one impaired sediment triad parameter (i.e., intermediate/high sediment quality), and 18 stations (85.7km2, 10.0% total study area) with two impaired sediment parameters (i.e., intermediate/degraded quality sediments). Generally, upon comparison, the number of stations with degraded sediments based upon the sediment quality triad of data was slightly greater in the central Puget Sound than in the northern and southern Puget Sound study areas, with the percent of the total study area degraded in each region decreasing from central to north to south (2.8, 1.3 and 0.5%, respectively). Overall, the sediments collected in Puget Sound during the combined 1997-1999 surveys were among the least contaminated relative to other marine bays and estuaries studied by NOAA using equivalent methods. (PDF contains 351 pages)
Resumo:
In order to study the colonization and development of moss mites (Oribatida) communities in a Scots pine forest of a reclaimed limestone mine dump in Northern Poland, 3 plots from the dump were chosen. The selected plots differed in age, 5 years old, 35 and 50 years old. From a total of 30 samples 499 mites (Acari) were extracted in Tullgren funnel from which 262 were Oribatida. Abundance (N) was analyzed in all mites and after determining the species of both, juvenile and adult stages of oribatids, the following indices were analyzed: Abundance (N), Dominance (D), Species diversity (S), Species richness (s) and Shannon’s diversity index (H). Regarding to the results obtained; oribatid mites were dominant with the highest abundance in all assemblages (Plot 1: 139 Oribatida /299 Acari. Plot 2: 40/55 and Plot 3: 83/145). Tectocepheus velatus showed a very high dominance (45,99%) in plot 1; the highest value for Shannon’s diversity index belonged to plot 3. On the other hand, juvenile’s percentage was significantly higher than adult’s percentage, especially at plot 2 (95,02%). These results made us to conclude that the high abundance of oribatids in the youngest forest is due to T. velatus’s high abundance and that plot 3 is the best habitat for mites. Finally, the high occurrence of juvenile stages requires keeping on studying the area.
Resumo:
ENGLISH: Growth and mortality data for Cetengraulis mysticetus, Anchoa naso, Engraulis mordax, E. ring ens, E. anchoita, E. encraslcbolus, E. japonicus, and E. australis were assembled and compared. Estimates of the coefficients of natural mortality, M, of E. anchoita and Ancboa naso were made from the maximum age of the former and from data for the other species. The relative yields per recruit at different fishing mortality rates and lengths at entry into the fishery were calculated for each species, using what are considered to be the best estimates and other likely values of K, a constant of growth, and M. The maximum yields per recruit are theoretically obtainable at very high fishing mortality rates, except when the length at entry is low relative to the asymptotic length. K and M may be positively related to the temperature and to each other, and if such is the case at higher temperatures greater fishing effort would be needed to attain the maximum yield per recruit. The applicability of the yield-per-recruit approach to the data is discussed, and suggestions for further research are made. SPANISH: Se reunieron y compararon los datos sobre el crecimiento y mortalidad correspondientes a Cetengraulis mysticetus, Anchoa naso, Engraulis mordax, E. ringens, E. anchoíta, E. encrasicbolus, E. japonicus y E. australls. Los estimativos de los coeficientes de la mortalidad natural, M, de E. anchoita y Anchoa naso se obtuvieron según la edad máxima de E. anchoita y según los datos de las otras especies. Se calculó para cada especie el rendimiento relativo por recluta a diferentes tasas de mortalidad por la pesca y a diferentes longitudes de entrada a la pesquería, empleándose lo que se considera que son los mejores estimativos y otros valores probables de K, una constante de crecímíento, y M. El rendimiento máximo por recluta se obtiene teóricamente a tasas muy altas de la mortalidad por la pesca con excepción de cuando la longitud a la entrada es baja en relación a la longitud asintótica. K y M pueden estar relacionadas positivamente a la temperatura y mutuamente, y si este es el caso a temperaturas más altas se necesitará un esfuerzo superior de pesca para obtener el rendimiento máximo por recluta. La aplicabilidad del enfoque a los datos rendimiento-por-recluta es discutido y se hacen sugerencias para otras investigaciones. (PDF contains 66 pages.)
Resumo:
German landings of brown shrimp consisted of 12 081 tonnes of consumption shrimp, 1078 tonnes of undersized shrimp and of 650 tonnes of industrial shrimp. The seasonality showed the typical pattern with very low landings in winter, a first peak of monthly landings in spring and a more pronounced second peak in autumn due to the incoming new year class of young brown shrimp, lasting until December. The comparison of monthly and summed monthly landings for the last fifteen years (1988 to 2002) showed a very high degree of variability not likely to beuseful for an acceptable and reliable prediction scheme. However, the landings of the first half of a year show apositive correlation towards the landings of the preceding six months (p = 0,01). The remaining scatter of 72 percent allows only for imprecise predictions.
Resumo:
When drafting a new model of a towed technical system for fisheries (trawl, towed TV gear or similar), and also when measuring an existing and already tested system it is not easy to foresee of practical behaviour, which depends of various parameters. The measuring programme for recording all data needs a lot of time and money, and also has some limitations. Therefore we developed for such systems mathematical-physical models, which allow a complex calculation. Their real value, however, results only from practical verification. During the cruise no. 222 of “Walther Herwig III” in November 2000 comparative investigations for 2concrete systems were carried out. This was done in cooperation with the University in Rostock, where such models are being developed and computerized. One of the systems mesasured was a pelagic herring trawl and the other one the towed TV gear for underwater observations of the Institute for Fishery Technology and Fish Quality. The correspondence between model calculation and measurements was very high for both systems.
Resumo:
A systematic study on the available data of 26 metallic glasses shows that there is an intrinsic correlation between fragility of a liquid and bulk modulus of its glass. The underlying physics can be rationalized within the formalism of potential energy landscape thermodynamics. It is surprising to find that the linear correlation between the fragility and the bulk-shear modulus ratio exists strictly at either absolute zero temperature or very high frequency. Further analyses indicate that a real flow event in bulk metallic glasses is shear dominant, and fragility is in inverse proportion to shear-induced bulk dilatation. Finally, extension of these findings to nonmetallic glasses is discussed.
Resumo:
To simulate fracture behaviors in concrete more realistically, a theoretical analysis on the potential question in the quasi-static method is presented, then a novel algorithm is proposed which takes into account the inertia effect due to unstable crack propagation and meanwhile requests much lower computational efforts than purely dynamic method. The inertia effect due to load increasing becomes less important and can be ignored with the loading rate decreasing, but the inertia effect due to unstable crack propagation remains considerable no matter how low the loading rate is. Therefore, results may become questionable if a fracture process including unstable cracking is simulated by the quasi-static procedure excluding completely inertia effects. However, it requires much higher computational effort to simulate experiments with not very high loading rates by the dynamic method. In this investigation which can be taken as a natural continuation, the potential question of quasi-static method is analyzed based on the dynamic equations of motion. One solution to this question is the new algorithm mentioned above. Numerical examples are provided by the generalized beam (GB) lattice model to show both fracture processes under different loading rates and capability of the new algorithm.
Resumo:
[ES] El medio rural se enfrenta a un grado de envejecimiento muy elevado, mayor aún que el de las ciudades. Las necesidades en materia de atención social se incrementan en estos espacios, situación agravada por la falta de servicios sociales en sus municipios y por su lejanía. Incluso las comunidades rurales próximas a núcleos urbanos de entidad se enfrentan a este problema. En el caso en estudio recogemos la realidad social del medio rural próximo a San Sebastián, caracterizado por un habitante envejecido, un alto grado de dependencia agravado por residir en un hábitat disperso y un problema cuya asunción se atribuye a la mujer de la familia