Distribution of surface sediments off Indus delta on the continental shelf of Pakistan

Surface sediments from the continental shelf area off Indus delta were analysed for their textural characteristics and carbonate content. The sediments are largely silt, silty clay and clayey silty sand. Sandy fraction is dominant in the outer region with relatively high carbonate content. The study shows that distribution of carbonate in sediments off Indus delta continental shelf is controlled by the dilution of terrigenous material and its distance from source area.

Application of a wind-driven barotropic model to simulate the seasonal circulation of the northern Arabian Sea

A two dimensional numerical barotropic model based on the depth-integrated equations is presented here. Sensitivity of the model is analyzed by using wind stresses of different months. Real wind data and actual bathymetry are used as an input to obtain the circulation patterns of the northern Arabian Sea during specific seasons. However, the model is also tested with constant depth for comparison. A number of numerical simulations are performed to study the combined effects of wind stress, bathymetry and basin geometry. Since the goal of this study is to simulate the circulation of the northern Arabian sea in accordance with the observed wind stress, therefore, wind stresses of different months like July (the peak os SW monsoon), October (the transition period from SW to NE monsoon), January (the peack of NE monsoon) and April (the transition period from NE to SW monsoon) are used to examine the circulation patterns. The results obtained are satisfactory in that they resemble known patterns.

A Comparison of the bacterial flora of surface and sub-surface water of the sea off Ceylon

Under stable conditions of stratification of the sea, evidence of generic differences of the associated bacterial flora of the water masses has been obtained, between surface and sub-surface water. Gram negative rods, especially pseudomonads and achromobacters were more frequent at the surface. The fermentative and oxidase negative flora was more frequent in sub-surface water. The surface water in general had a greater variety of bacterial types while the sub-surface water had a flora with a greater range of biochemical activity. These results are discussed in relation to the hydrological condition of the water masses and the bacterial flora of freshly caught fish.

The effect of surface hardening on the elastic shakedown of elliptical contacts

The effect of varying both the aspect ratio and the coefficient of friction of contacts with elliptical geometry on their elastic shakedown performance has been examined theoretically for surfaces with two types of subsurface hardness or strength profiles. In stepwise hardening the hard layer is of uniform strength while in linear hardening its strength reduces from a maximum at the surface to that of the core at the base of the hardened layer. The shakedown load is expressed as the ratio of the maximum Hertzian pressure to the strength of the core material. As the depth of hardening, expressed as a multiple of the elliptical semi-axis, is increased so the potential shakedown load increases from a level that is appropriate to a uniform half-space of unhardened material to a value reflecting the hardness of the surface and near-surface material. In a step-hardened material, the shakedown limit for a surface 'pummelled' by the passage of a sequence of such loads reaches a cut-off or plateau value, which cannot be exceeded by further increases in hardening depth irrespective of the value of the friction coefficient. For a linear-hardened material the corresponding plateau is approached asymptotically. The work confirms earlier results on the upper bounds on shakedown of both point and line contacts and provides numerical values of shakedown loads for intermediate geometries. In general, the case depth required to achieve a given shakedown limit reduces in moving from a transversely moving nominal line load to an axisymmetric point load.

Variability of nanoindentation responses of bone and artificial bone-like composites

Nanoindentation is a popular technique for measuring the intrinsic mechanical response of bone and has been used to measure a single-valued elastic modulus. However, bone is a composite material with 20-80 nm hydroxyapatite plates embedded in a collagen matrix, and modern instrumentation allows for measurements at these small length scales. The present study examines the indentation response of bone and artificial gelatin-apatite nanocomposite materials across three orders of magnitude of lengthscale, from nanometers to micrometers, to isolate the composite phase contributions to the overall response. The load-displacement responses were variable and deviated from the quadratic response of homogeneous materials at small depths. The distribution of apparent elastic modulus values narrowed substantially with increasing indentation load. Indentation of particulate nanocomposites was simulated using finite element analysis. Modeling results replicated the convergence in effective modulus seen in the experiments. It appears that the apatite particles are acting as the continuous ("matrix") phase in bone and nanocomposites. Copyright © 2004 by ASME.

MicroRNA regulation and the variability of human cortical gene expression

Understanding the driving forces of gene expression variation within human populations will provide important insights into the molecular basis of human phenotypic variation. In the genome, the gene expression variability differs among genes, and at prese