Critical adsorption of polyelectrolytes onto charged Janus nanospheres

Based on extensive Monte Carlo simulations and analytical considerations we study the electrostatically driven adsorption of flexible polyelectrolyte chains onto charged Janus nanospheres. These net-neutral colloids are composed of two equally but oppositely charged hemispheres. The critical binding conditions for polyelectrolyte chains are analysed as function of the radius of the Janus particle and its surface charge density, as well as the salt concentration in the ambient solution. Specifically for the adsorption of finite-length polyelectrolyte chains onto Janus nanoparticles, we demonstrate that the critical adsorption conditions drastically differ when the size of the Janus particle or the screening length of the electrolyte are varied. We compare the scaling laws obtained for the adsorption-desorption threshold to the known results for uniformly charged spherical particles, observing significant disparities. We also contrast the changes to the polyelectrolyte chain conformations close to the surface of the Janus nanoparticles as compared to those for simple spherical particles. Finally, we discuss experimentally relevant physicochemical systems for which our simulations results may become important. In particular, we observe similar trends with polyelectrolyte complexation with oppositely but heterogeneously charged proteins.

Carbon Film Coating of Abutment Surfaces: Effect on the Abutment Screw Removal Torque

Purpose: To evaluate the effect of diamond-like carbon (DLC) coating of prefabricated implant abutment on screw removal torque (RT) before and after mechanical cycling (MC).Materials and Methods: Fifty-four abutments for external-hex implants were divided among 6 groups (n = 9): S, straight abutment (control); SC, straight coated abutment; SCy, straight abutment and MC; SCCy, straight coated abutment and MC; ACy, angled abutment and MC; and ACCy, angled coated abutment and MC. The abutments were attached to the implants by a titanium screw. RT values were measured and registered. Data (in Newton centimeter) were analyzed with analysis of variance and Dunnet test (alpha = 0.05).Results: RT values were significantly affected by MC (P = 0.001) and the interaction between DLC coating and MC (P = 0.038). SCy and ACy showed the lowest RT values, statistically different from the control. The abutment coated groups had no statistical difference compared with the control. Scanning electron microscopy analysis showed DLC film with a thickness of 3 mm uniformly coating the hexagonal abutment.Conclusion: DLC film deposited on the abutment can be used as an alternative procedure to reduce abutment screw loosening.

Biomechanical Study in Polyurethane Mandibles of Different Metal Plates and Internal Fixation Techniques, Employed in Mandibular Angle Fractures

The aim of this study was to perform a physicochemical and morphological characterization and compare the mechanical behavior of an experimental Ti-Mo alloy to the analogous metallic Ti-based fixation system, for mandibular angle fractures. Twenty-eight polyurethane mandibles were uniformly sectioned on the left angle. These were divided into 4 groups: group Eng 1P, one 2.0-mm plate and 4 screws 6 mm long; group Eng 2P, two 2.0-mm plates, the first fixed with 4 screws 6 mm long and the second with 4 screws 12 mm long. The same groups were created for the Ti-15Mo alloy. Each group was subjected to linear vertical loading at the first molar on the plated side in a mechanical testing unit. Means and standard deviations were compared with respect to statistical significance using ANOVA. The chemical composition of the Ti-15Mo alloy was close to the nominal value. The mapping of Mo and Ti showed a homogeneous distribution. SEM of the screw revealed machining debris. For the plates, only the cpTi plate undergoes a surface treatment. The metallographic analysis reveals granular microstructure, from the thermomechanical trials. A statistically significant difference was found (P < 0.05) when the comparison between both internal fixation techniques was performed. The 2P technique showed better mechanical behavior than 1P.

Search for gravitational radiation from intermediate mass black hole binaries in data from the second LIGO-Virgo joint science run

This paper reports on an unmodeled, all-sky search for gravitational waves from merging intermediate mass black hole binaries (IMBHB). The search was performed on data from the second joint science run of the LIGO and Virgo detectors (July 2009-October 2010) and was sensitive to IMBHBs with a range up to similar to 200 Mpc, averaged over the possible sky positions and inclinations of the binaries with respect to the line of sight. No significant candidate was found. Upper limits on the coalescence-rate density of nonspinning IMBHBs with total masses between 100 and 450 M-circle dot and mass ratios between 0.25 and 1 were placed by combining this analysis with an analogous search performed on data from the first LIGO-Virgo joint science run (November 2005-October 2007). The most stringent limit was set for systems consisting of two 88 M-circle dot black holes and is equal to 0.12 Mpc(-3) Myr(-1) at the 90% confidence level. This paper also presents the first estimate, for the case of an unmodeled analysis, of the impact on the search range of IMBHB spin configurations: the visible volume for IMBHBs with nonspinning components is roughly doubled for a population of IMBHBs with spins aligned with the binary's orbital angular momentum and uniformly distributed in the dimensionless spin parameter up to 0.8, whereas an analogous population with antialigned spins decreases the visible volume by similar to 20%.

Water buffalo genome characterization by the Illumina BovineHD BeadChip

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise de cilindros de paredes grossas através do método dos elementos finitos

Have long studied the distribution of stresses in the cylinder. When this thickness is less than or equal to 10% of the inner radius is possible to consider a uniform distribution along the thickness of the tube. However, when the thickness is greater than 10% of the inner radius is necessary to consider the theory of thick-walled cylinders. This theory shows that when the thickness increases on the radius, the stresses do not act uniformly. The objective of this study is to determine the maximum stresses in thick-walled cylinders by comparing the results obtained by the theory of elasticity and the finite element method

Influência da dentina bovina e do dispositivo de microtração na resistência de união de sistemas adesivos

Pós-graduação em Odontologia Restauradora - ICT

Bounds for the zeros of symmetric kravchuk polynomials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Karyotype of the invasive species Pterois volitans (Scorpaeniformes: Scorpaenidae) from Margarita Island, Venezuela

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Radiação e detetores de Unruh - DeWitt

Pós-graduação em Física - IFT

Investigação das propriedades ópticas, morfológicas e elétricas da heterojunção SnO2: Ce3+/ GaAs

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

RB34-71 Effects of Inflation and Deflation Upon Nebraska Agriculture, 1914 to 1932

Nebraska farmers prospered during the period which followed the depression of the nineties and preceded the beginning of the World War. To be sure the prosperity was not uniformly distributed either by years or by areas. The corn crop was unusually short in a large portion of the state in 1901 and an almost total failure in many of the southern counties in 1913. Chinch bugs did considerable injury in 1901 and the Hessian fly in 1905 and 1914. There was noticeable damage from insects in some areas in other years. No part of the state, however, suffered from long-continued drouth or repeated ravages of insect pests. The depression of 1907 affected credit and prices very severly for a few months, but recovery was rapid and within less than a year business was again moving forward. This 1934 research bulletin covers the problems of inflation and deflation; changes in the prices of various commodities during inflation and deflation; prices and purchasing power of Nebraska farm products, 1914 to 1932; adjustments during inflation and deflation; the effect of wages on Nebraska agriculture; taxes; Nebraska farm income; changes in types of farming in Nebraska, 1914 to 1932; the banking situation; Nebraska farm land prices; and the effects of inflation and deflation upon Nebraska businesses.

Bandit-Based Algorithms for Budgeted Learning

We explore the problem of budgeted machine learning, in which the learning algorithm has free access to the training examples’ labels but has to pay for each attribute that is specified. This learning model is appropriate in many areas, including medical applications. We present new algorithms for choosing which attributes to purchase of which examples in the budgeted learning model based on algorithms for the multi-armed bandit problem. All of our approaches outperformed the current state of the art. Furthermore, we present a new means for selecting an example to purchase after the attribute is selected, instead of selecting an example uniformly at random, which is typically done. Our new example selection method improved performance of all the algorithms we tested, both ours and those in the literature.

Acetaminophen as an Oral Toxicant for Nile Monitor Lizards (Varanus niloticus) and Burmese Pythons (Python molurus bivittatus)

Context. Invasive species are a growing global problem. Biological invasions can result in numerous harmful impacts on local ecologies, and non-native herpetofauna are frequently ignored. Nile monitor lizards (Varanus niloticus) and Burmese pythons (Python molurus bivittatus, recently reassessed as Python bivittatus bivittatus), have become established in southern Florida. Both are large, semi-aquatic predators that pose serious threats to a variety of threatened and endangered species, as well as to the unique ecology of the area. Aims. Acetaminophen (CAS#103-90-2), a lethal oral toxicant for the invasive brown treesnake (Boiga irregularis) on Guam, was investigated as a possible toxicant in juvenile Burmese pythons and Nile monitors. Methods. Dead neonatal mouse (DNM) baits containing 0, 10, 20, or 40 mg acetaminophen were force-fed to Nile monitors, whereas DNM containing doses of 0, 20, 40, or 80 mg were freely consumed by Burmese pythons. Subjects were frequently observed post-treatment for general condition and position, with special attention paid to activity (if any), behaviour, respiration, bleeding, emesis, ataxia, and mortality. Key results. In Nile monitors, acetaminophen doses of 10, 20, or 40 mg resulted in 0, 50 and 100% mortality, respectively. In Burmese pythons, doses of 20, 40, or 80 mg resulted in 14.3, 85.7 and 100% mortality, respectively. No mortality was observed in control individuals of either species. A negative correlation between dosage (mg kg–1) and time-to-death was observed in both species. Dosages ranging from 522 to 2438 mg kg–1 and 263 to 703 mg kg–1 were uniformly lethal to monitors and pythons, respectively. Neither species exhibited signs of pain or discomfort following acetaminophen treatment. Conclusions. Acetaminophen is an effective toxicant in juvenile Nile monitors and Burmese pythons. Further investigation into acetaminophen toxicity in adults of these species is merited. Implications. Although further investigation into adult lethal dosages and strategies to optimize bait deployment while minimizing secondary hazards is required, acetaminophen may have a role to play in the control of these invasive species in Florida.

In-hospital death in acute coronary syndrome was related to admission glucose in men but not in women

Background: Admission hyperglycaemia is associated with mortality in patients with acute coronary syndrome (ACS), but controversy exists whether hyperglycaemia uniformly affects both genders. We evaluated coronary risk factors, gender, hyperglycaemia and their effect on hospital mortality. Methods: 959 ACS patients (363 women and 596 men) were grouped based on glycaemia >= or < 200 mg/dL and gender: men with glucose < 200 mg/dL (menG-); women with glucose < 200 mg/dL (womenG-); men with glucose >= 200 mg/dL (menG+); and women with glucose >= 200 mg/dL (womenG+). A logistic regression analysis compared the relation between gender and glycaemia groups and death, adjusted for coronary risk factors and laboratory data. Results group: menG- had lower mortality than menG+ (OR = 0.172, IC95% 0.062-0.478), and womenG+ (OR = 0.275, IC95% 0.090-0.841); womenG- mortality was lower than menG+ (OR = 0.230, IC95% 0.074-0.717). No difference was found between menG+ vs womenG+ (p = 0.461), or womenG- vs womenG+ (p = 0.110). Age (OR = 1.067, IC95% 1.031-1.104), EF (OR = 0.942, IC95% 0.915-0.968), and serum creatinine (OR = 1.329, IC95% 1.128-1.566) were other independent factors related to in-hospital death. Conclusions: Death was greater in hyperglycemic men compared to lower blood glucose men and women groups, but there was no differences between women groups in respect to glycaemia after adjustment for coronary risk factors.