The locus coeruleus and central chemosensitivity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo do comportamento mecânico de areias artificialmente cimentadas

Soil improved with the addition of cement have been utilized as an alternative to the construction of various types of geotechnical works, almost always present economic and environmental advantages. This paper presents a study on the usage of cement in the improvement of mechanical properties of sandy soils, characteristic of the region of Natal, collected from its dunes. This research was made in order to analyze the influence of cement content, voids, and also including water immersion and confining pressure. Samples molded from cement-soil mixtures were tested for unconfined compression tests and triaxial tests. The samples had the percentage of cement mixed in 2.5%, 5% and 10% by weight. The cement agent used was the Portland Cement of High Early strength(CPV-ARI), which promoted agility to the experimental procedure for presenting a rapid gain in strenght. The void ratio used ranged from 0.7 (more compact), 0,9 and 1,1(softer). The soil under study can be considered as pure sand. In general, it can be stated that the larger the amount of cement added to the sand studied is, the greater ultimate strength will be. Likewise, as more compact the soil is, the less void ratio and more resistant it will be present. The confining pressure tends to increase the resistance of the specimens. The cementing adopted grades showed that the use of different criteria for failure did not significantly alter the stress-strain parameters for the sand studied. The angle of friction values were found within the typical range of medium and compact sands. Cementing acted in the sand providing an intercepted cohesion which increased enhancing the potential cementation. In triaxial compression tests, the sand with void ratio is equal to 0.7 and showed the expected behavior for a compact sand while the stress-strain behavior of the same sand with the void ratio of 0.9 tended to be expected for the soft sand as well

Descontinuidade na seção transversal em laminados compósitos poliméricos: efeitos e propriedades

The growing demand in the use of composite materials necessitates a better understanding its behavior to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. It is know that most of the structural elements are designed with presence of geometric discontinuities (holes, notches, etc) in their longitudinal sections and / or transversals, and that these discontinuities affect the mechanical response of these elements. This work has aims to analyze a study of the mechanical response, when in the presence geometric discontinuity, of polymer matrix composite laminates (orthophthalic polyester) to the uniaxial tensile test. The geometric discontinuity is characterized by the presence of a center hole in the transversal section of the composite. In this study, different kinds of stacking sequences are tested, with and without the presence of the hole, so as to provide better understanding of the mechanical properties. This sense, two laminates were studied: the first is only reinforced by with seven layers short mats of fiberglass-E (CM) and the second where the reinforcement of fiberglass-E comes in the form of bidirectional fabric (CT), with only four layers. The laminate CT has the presence of anisotropy (sense of continuous fibers with respect to the applied load) as the main parameter influencing its mechanical behavior, behavior this, not observed for the CM. In addition to the mechanical properties was also studied the fracture characteristics developed in each composite laminated. The results also showed that the presence of the hole in the transversal section decreased the ultimate strength of laminates and changed the final characteristic of fracture in all kinds of composite laminated studied

Desenvolvimento de um laminado compósito híbrido a base de fibras de vidro/licurí

This research work is based, in search of reinforcement s vegetable alternative to polymer composites. The idealization of making a hybrid composite reinforced with vegetable fibers licuri with synthetic fibers is a pioneer in this area. Thus was conceived a hybrid composite laminate consisting of 05 (five) layers being 03 (three) webs of synthetic fibers of glass and E-02 (two) unidirectional fabrics of vegetable fibers licuri. In the configuration of the laminate layers have alternating distribution. The composite laminate was manufactured in Tecniplas Commerce & Industry LTD, in the form of a card through the manufacturing process of hand lay up. Licuri fibers used in making the foil were the City of Mare Island in the state of Bahia. After cooking and the idealization of the hybrid composite laminate, the objective of this research work has focused on evaluating the performance of the mechanical properties (ultimate strength, stiffness and elongation at break) through uniaxial tensile tests and three point bending. Comparative studies of the mechanical properties and as well as among other types of laminated hybrid composites studied previously, were performed. Promising results were found with respect to the mechanical properties of strength and stiffness to the hybridization process idealized here. To complement the entire study were analyzed in terms of macroscopic and microscopic characteristics of the fracture for all tests.

Compósito Polimérico Híbrido: Comportamento Mecãnico, Descotinuidade Geométrica e Resistência Residual

The growing demand in the use of hybrid composite materials makes it essential a better understanding of their behavior face of various design conditions, such as the presence of geometric discontinuities in the cross section of structural elements. This way, the purpose of this dissertation is a study of the mechanical response (strength and stiffness), modes (characteristics) of fracture and Residual Strength of an hybrid polymeric composite with and without a geometric discontinuity in its longitudinal section (with a reduction in the cross section) loaded by uniaxial tension. This geometric discontinuity is characterized by central holes of different diameters. The hybrid composite was fabricated as laminate (plate) and consisting of ortho-tereftalic polyester matrix reinforced by 04 outer layers of Jute fibers bidirectional fabrics and 01 central layer of E-glass bidirectional fabric. The laminate was industrially manufactured (Tecniplas Nordeste Indústria e Comércio Ltda.), obtained by the hand lay-up technique. Initially, a study of the volumetric density of the laminate was made in order to verify its use in lightweight structures. Also were performed comparative studies on the mechanical properties and fracture modes under the conditions of the specimens without the central hole and with the different holes. For evaluating the possible influence of the holes in the structural stability of the laminate, the Residual Strength of the composite was determined for each case of variation in hole diameter. As a complementary study, analyses of the macroscopic final fracture characteristic of the laminates were developed. The presence of the central hole of any sizes, negatively changed the ultimate tensile strength. Regarding the elastic modulus, moreover, the difference found between the specimens was within the range of tests displacement, showing the laminate stability related to the stiffness

Liberdade e negação da vontade: análise do ser-livre como representação e na angústia

Common understanding about what freedom means has always been more or less related to the power to realize something intended, desired, a capability. Therefore, being free is commonly interpreted under the concept of free-will and the category of possibility to act. Although there are predecessors in History of Philosophy, Schopenhauer refuses the thesis of free will proposing otherwise the denial of willing (to live) as the ultimate possibility for human freedom, if not the only one left. The thesis that would make him famous was deeply misunderstood and so miscarried somewhat due to the way it was many times presented by the means of exotic examples wrapped in a mystical mood besides exaltations to Eastern traditions, which may satisfy anthropological curiosity instead of being capable to satisfy the reader in a philosophical way. It seems to result from Schopenhauer s thought a kind of pessimism against life. Otherwise, typical readings on the Schopenhauerian thesis are found full of inconsistencies once closely regarded, which blame does not belong to the author but to his interpreters. A new reading about the denial of willing as the ultimate possibility for human freedom demands a criticism on the inconsistencies and prejudgments deep grounded. For this, we firstly clarify the ways of understanding the willing nothing , which cannot be reduced to the mere refusal or conformism, being instead positively understood as a special manner of willing: the admission of oneself for the sake of one is. A few more than a century later The world as will and representation came to light, Heidegger proposes in his fundamental ontology that the proper being-free concerns to originary decision by which, in anguish of being suspended in nothingness, Dasein renders itself singular as the being who is in-a-world and to-death, concluding that the ultimate possibility of freedom is being-free-to-death. Developing the hypothesis that freedom, properly understood, concerns to nothingness as to indeterminate possibilities, we seek for a dialogue between Schopenhauer s thought and existential philosophy aiming to reconstitute and overcome Metaphysics tradition turning the question about freedom into a matter of Ontology. From the factual existence perspective, as we must show, every human activity (or inactivity) is ordinarily mediated by representations, in which me and world appear as distinct entities. So, each one among determininate individuals finds itself connected to the things in the world by interest, which proper concept must be sufficiently explored. Starting from this point, we may proceed to detailed analysis of usual representations of freedom aiming their destruction by Ontology and then reaching existential thesis according to Kierkegaard and Heidegger. Turning back to the analysis of Schopenhauer s work, we conclude existential understanding of freedom as will-to-be can also be found in Schopenhauer. In this way, denial of willing means ultimate freedom once the Will turns back to its own essence by suppressing the world as representation, which means the originary absolute indetermination of the extreme possibility to-be

Trends in rheumatic fever: clinical aspects and perspectives in prophylactic treatments

Introduction: Rheumatic fever (RF), a systemic illness that may occur following Group A beta-hemolytic streptococcal (GABHS) pharyngitis in children, is a major problem in countries with limited resources. Because of its long track record and low cost, an injection of benzathine penicillin G (BPG) suspension every 3 or 4 weeks has been used as secondary prophylaxis. Despite its excellent in vitro efficacy, the inability of BPG to eradicate GABHS has been frequently reported.Areas covered: This work reviews the possible causes of failure, as well as the inconvenience of the current prophylactic treatment of acute RF and suggests a new pharmacotherapeutic system that could replace the current one.Expert opinion: RF is a major problem concerning only countries with limited resources and could be considered as a neglected disease. The dose regimen using BPG suspension results in failures, which could be avoided by the use of nanocarrier-based systems. To meet this ultimate goal, the research should be transposed from the laboratory scale to an industrial and clinical application level. This research should be conducted to produce a pharmaceutical dosage form that will be commercially available, consumed by and affordable for patients. However, health, environmental and socioeconomic hazards should be considered.

A moral kantiana entre deontologia e teleologia

This dissertation examines the Kantian moral in a teleological perspective. It consists of a reconstruction of philosophy practice that departs from the investigation of the categorical imperative, the concepts of duty, will, good will, as well as an approach on the ways of investigation of nature, which will enable the foundation to engage in the teleological argument, investigating the organized human beings, the harmonious system, its relationship with the ultimate and most important purpose, always flexing the analysis of these concepts the idea of purpose. Subsequently we will establish an argument about the end terminal and the implication of this concept to think about the real idea of the system in Kant and his relationship or support for moral theory. In essence this paper approaches the moral point of view of ethics, outlining the insufficiency of this field for the foundation of architectural moral, which will enable the final touch or the indispensability or the teleological argument as fundamental to the Kantian moral Theory

Behaviour of displacement, cast-in-place piles on collapsible soil

The paper presents the results of instrumented compression load tests carried out in three uncased cast-in-place piles (pounded piles, called apiloadas in Brazil) which is largely used in interior part of the state of São Paulo. The tests were conducted with the soil in the natural condition and after soaking with water, before loading, in order to evaluate the influence of the soil collapsibility in the results. The values of the ultimate loads (total, point and lateral loads) obtained in the tests are presented and compared with the values predicted by empirical methods that utilize SPT and CPT results.

Surface energy increase of oxygen-plasma-treated PET

Prosthetic composite is a widely used biomaterial that satisfies the criteria for application as an organic implant without adverse reactions. Polyethylene therephthalate (PET) fiber-reinforced composites have been used because of the excellent cell adhesion, biodegradability and biocompatibility. The chemical inertness and low surface energy of PET in general are associated with inadequate bonds for polymer reinforcements. It is recognized that the high strength of composites, which results from the interaction between the constituents, is directly related to the interfacial condition or to the interphase. A radio frequency plasma reactor using oxygen was used to treat PET fibers for 5, 20, 30 and 100 s. The treatment conditions were 13.56 MHz, 50 W, 40 Pa and 3.33 x 10(-7) m(3)/s. A Rame-Hart goniometer was used to measure the contact angle and surface energy variation of fibers treated for different times. The experimental results showed contact angle values from 47degrees to 13degrees and surface energies from 6.4 x 10(-6) to 8.3 x 10(-6) J for the range of 5 to 100 s, respectively. These results were confirmed by the average ultimate tensile strength of the PET fiber/polymethylmethacrylate (PMMA) matrix composite tested in tensile mode and by scanning electron microscopy. (C) 2003 Elsevier B.V. All rights reserved.

Pulsed Nd:YAG laser seam welding of AISI 316L stainless steel thin foils

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The Approach To The Administrative Mapping In Knowledge Management For Portugal Libraries

In the study of theoretical trends in Administration, the management of information follows the development of theories of Administration; constant-adaptations are suffered. Information Science as Museums, Archives and Libraries, understands and concerns itself with the changes wrought in these endeavour of the knowledge society as new forms of communication and integration. They interact in ways such as to maximize access to information and facilitate improvement on their structural environment. The research aims at identifies the requirements and specifications of an information system for knowledge management in the public's library enviromnent and proposes to achieve a pre-defined structure for the implementation of administration management. The research is conducted with public's library of the metropolian region of the North's Portugal. In the improvement of systems theoretical administrative trends become management decisions and result in the ultimate success of the organization.

Morte e filosofia: sobre o desejo de imortalidade entre os gregos

Enfoca-se aqui a vinculação íntima entre a exaustiva busca empreendida pelo espírito grego para edificar em terreno sólido as colossais fundações de uma ciência dos primeiros princípios, e o que supõe-se ser sua motivação secreta e última, a aspiração pela eternidade, o mais universal e genuíno desejo presente em todo ser humano, não ser obliterado pelo tempo.

Os sentidos de compreensão nas teorias de Weber e Habermas

Partindo do pressuposto de que a teoria social elaborada por Habermas em muito se assemelha àquela construída por M. Weber, procedeu-se a um estudo comparativo com a intenção de identificar as formas pelas quais Weber e Habermas elaboraram o conceito de compreensão, ao mesmo tempo em que e o elegeram, cada um a seu modo, como instrumento metodológico adequado às dificuldades da produção de conhecimento científico nas Ciências Sociais. Tanto para Weber, como para Habermas, o conhecimento nas Ciências Sociais não consegue escapar das influências diretas da subjetividade do cientista, como também não é capaz de se proteger das contingências histórico-culturais aos quais inevitavelmente toda ação humana está vinculada. Por isso, fundamentados em suas próprias razões, tanto Weber quanto Habermas apontam a compreensão como a forma possível de conhecimento, o que implica a renúncia às pretensões explicativas e à produção de teorias gerais de fundamentação última, que são típicas das ciências convencionais.

Mechanical comparative analysis of three different types of sutures in different dimensions tendons: experimental study

O objetivo da presente investigação experimental foi avaliar o perfil mecânico de três tipos de técnicas de sutura entre tendões de dimensões diferentes. Foram utilizados 21 cães sem raça definida (11machos/10 fêmeas), dos quais foram obtidos os tendões flexor comum dos dedos - t.c. (maior dimensão) e tibial cranial - t.cr. (menor dimensão), de ambos os membros pélvicos. Logo após a obtenção das peças foi realizada sutura, segundo cada tipo de técnica, porém sempre com o mesmo número de pontos. Os tendões utilizados para sutura foram sempre do lado direito e o controle do lado esquerdo (t.cr.). Após a sutura, os corpos de prova foram fixados em garras especialmente desenvolvidas e submetidos a ensaio de tração axial à velocidade de 30mm/minuto. Após o ensaio o programa da máquina forneceu os valores da carga máxima ( na ruptura) e deformação absoluta (mm) e relativa (%), além do diagrama carga-deformação. Os resultados foram submetidos a estudo estatístico pela análise de medidas repetidas no nível de 5% de significância. Não foi constatada diferença estatisticamente significativa nos parâmetros mecânicos avaliados nos três grupos de técnicas de suturas. em relação ao controle (tendão de menos diâmetro contra-lateral), observou-se que a sutura apresenta resistência máxima a tração significativamente menor que o controle e maior deformação.