An acqueous extract of Bidens pilosa L. protects liver from cholestatic disease: experimental study in young rats

OBJETIVO: Testar o efeito hepatoprotetor do extrato aquoso de Bidens pilosa L. (EBP) na doença hepática induzida pela ligadura e ressecção do ducto biliar comum (LRDBC) em ratos jovens. MÉTODOS: Estudamos ratos Wistar com 21º. dia de vida (P21) divididos em quatro grupos de 10 animais, Grupo SA: operação simulada e água; Grupo SD: operação simulada e EBP (160mg de folhas frescas/100g de peso corporal/dia); Grupo LA: LRDBC e água e Grupo LD: LRDBC e EBP diariamente. O tempo de sono por pentobarbital (TSP), aspartato (AST) e alanina (ALT) aminotransferase foram determinadas após o sacrifício (P70). O Score de Ruwart (SR) para fibrose hepática foi atribuído para cada animal. Foi realizada análise de variância com dois fatores e pelo teste de Tukey para comparações múltiplas ou por teste não paramétrico. RESULTADOS: Houve diferença estatisticamente significativa entre LA e LD nas variáveis: TSP (médias LA=390; LD=173), AST (médias LA=8, LD=5), ALT (medianas LA=2; LD=1) e SR (medianas LA=2; LD=1). CONCLUSÃO: EBP poderá ser empregado na fitoterapia da doença hepática induzida pela colestase obstrutiva crônica, pois protege a função hepática, diminui a velocidade de necrose e a intensidade da fibrose hepática na obstrução biliar extra-hepática.

Frequency of human leukocyte antigen (hla) in patients with malaria and in the general population of Humaitá county, Amazonas state, Brazil

Em agosto de 1983 foram observados 85 habitantes do Município de Humaitá, Estado do Amazonas, Brasil, com a finalidade de estudar a prevalência dos antígenos de HLA -A, -B, -C e DR, dentre os quais 38 eram doentes com malária causada pelo Plasmodium falciparum Todos eles foram examinados para avaliação de esplenomegalia, exame parasitológico de sangue e pesquisa de anticorpos de malária. Foram constituídos três grupos: (I) 25 indivíduos nascidos na região Amazônica que nunca tiveram malária; (II) 38 indivíduos naturais da Amazônia que tinham sido tratados de malária no passado, ou que estavam tendo malária atual, e (III) 22 doentes com malária que contraíram na Amazônia e eram procedentes de outras regiões do Brasil. Foram colhidas amostras de sangue de cada um deles, separados os linfôcitos e os antígenos de HLA foram tipados pelo teste de microlinfocitotoxidade. Houve elevada freqüência de antígenos não identificados, nos grupos estudados, o que sugere ou a existência de homozigoze, oufenôtipo não identificado nessa população. Houve alta freqüência fenotípica de antígeno deAg(W24) (44,7%) no Grupo II, quando comparado ao Grupo 1(32%) ou Grupo III (9%). Os indivíduos do Grupo II mostraram também elevada freqüência do antígeno DR4 (80%) quando comparado ao Grupo 1(36,3%) ou Grupo III(16,6%). Essas observações sugerem a possibilidade de suscetibilidadegenética ã malária entre os nativos da Amazônia e indicam a necessidade da realização de inquéritos mais extensos sobre a freqüência de antígenos de HLA em habitantes de zona endêmica de malária.

Transference in vitro of the resistance to the antimicrobials between Escherichia coli, Lactobacillus spp. and Salmonella enteritidis isolated from chickens

O objetivo deste trabalho foi verificar a possibilidade de transferência de resistência aos antimicrobianos entre bactérias normais da microbiota de frangos e Salmonella Enteritidis. Utilizamos amostras de Lactobacillus spp. (L. spp.), Salmonella Enteritidis (SE) e Escherichia coli (E. coli) previamente isolados de frangos, selecionados após prova de sensibilidade antimicrobiana in vitro conforme metodologia padrão (Comitê Nacional para Padrões Clínicos de Laboratório). Utilizamos aqueles com resistência e sensibilidade aos antimicrobianos indutores, chamados de bactérias doadoras e receptoras, respectivamente. Os antimicrobianos indutores foram utilizados para estimular a transferência de resistência aos antimicrobianos entre as bactérias. A possibilidade de transferência foi verificada da E. coli resistente para a SE e L. spp. Também foi verificada a transferência de uma amostra de L. spp resistente aos antimicrobianos indutores para a SE. Só foi possível verificar a transferência da resistência aos antimicrobianos indutores quando a bactéria doadora foi a E. coli e a bactéria receptora foi a SE. No presente estudo concluímos que a transferência de resistência aos antimicrobianos entre bactérias é possível, mas nem todas as bactérias participam desse evento, não transmitindo e nem adquirindo esta resistência.

A polymerase chain reaction for detection of Brucella canis in vaginal swabs of naturally infected bitches

A PCR assay for the detection of Brucella canis in canine vaginal swab samples was evaluated, comparing its performance with that of bacterial isolation, serological tests, and a blood PCR assay. One hundred and forty-four female dogs were clinically examined to detect reproductive problems and they were tested by the rapid slide agglutination test, with and without 2-mercaptoethanol (2ME-RSAT and RSAT, respectively). In addition, microbiological culture and PCR were performed on blood and vaginal swab samples. The results of the vaginal swab PCR were compared to those of the other tests using the Kappa coefficient and McNemar test. of the 144 females that were examined, 66 (45.8%) were RSAT positive, 23 (15.9%) were 2ME-RSAT positive, 49 (34.02%) were blood culture positive, 6 (4.1%) were vaginal swab culture positive, 54 (37.5%) were blood PCR positive, 52 (36.2%) were vaginal swab PCR positive, and 50.69% (73/144) were positive by the combined PCR. The PCR was able to detect as few as 3.8 fg of B. canis DNA experimentally diluted in 54 ng of canine DNA, extracted from vaginal swab samples of non-infected bitches. In addition, the PCR assay amplified B. canis genetic sequences from vaginal swab samples containing 1.0 x 10(0) cfu/mL. In conclusion, vaginal swab PCR was a good candidate as a confirmatory test for brucellosis diagnosis in bitches suspected to be infected, especially those negative on blood culture or blood PCR; these animals may be important reservoirs of infection and could complicate attempts to eradicate the disease in confined populations. (C) 2007 Elsevier B.V. All rights reserved.

Effect of organic mineral supplementation on the egg quality of semi-heavy layers in their second cycle of lay

This study was carried out to evaluate the effects of dietary trace mineral levels and sources on egg quality parameters of second-cycle semi-heavy layers. A number of 360 72-week-old layers were submitted to forced molting. Upon return of lay (83 weeks of age), birds were distributed according to a completely randomized experimental design of six treatments with six replicates of 10 birds each. The control treatment consisted of 0.10% dietary supplementation of trace minerals from inorganic sources, which was proportionally replaced by five levels (110, 100, 90, 80, 70%) of an organic trace mineral supplement containing 30, 30, 40, 6, 0.61, and 0.3 g/kg product of Zn, Fe, Mn, Cu, I, and Se, respectively. All diets contained equal protein, energy, and amino acid levels. Every 28 days of the experimental period (112 days) four eggs per replicate were collected for egg quality evaluation. The following parameters were evaluated: specific gravity, yolk, albumen and eggshell percentages, yolk index, Haugh units, and eggshell thickness and breaking strength. One sample per replicate, consisting of the pool of the yolks of three eggs collected at the end of each experimental period, was used to assess protein and mineral (Ca, P, Cu, Fe, Mn, and Zn) contents. The results were submitted to ANOVA, and means to the test of Tukey at 5% significance level. The evaluated trace mineral levels and sources did not influence any of the studied egg quality parameters. It was concluded that reducing organic trace mineral supplementation in up to 70% relative to 100% inorganic trace mineral supplementation does not affect egg parameters and therefore, can be applied to the diet of semi-heavy layers in their second cycle of lay.

Estimating the impact of environmental conditions on hatching results using multivariable analysis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Analysis in vitro of direct bonding system with cyanoacrylate ester and orthodontic wires

The aim of this study was to evaluate the tensile strength of orthodontic wires bonded onto the enamel with cyanoacrylate ester. To obtain the specimens, 120 human premolars (extracted for orthodontic or periodontal reasons) were included in acrylic blocks of rapid polymerization with three teeth each. Four groups were formed with ten specimens each. In the specimens, a dental splint model was made with cyanoacrylate ester and round stainless steel wire. In groups I, II and III, cyanoacrylate ester was used with round steel wires, with variation in diameter: 0.014 inches; 0.016 inches and 0.018 inches, respectively. In group IV, round steel wire 0.018 inches was used with photo polymerizing resin composite with previous acid etching. The adhesive force of the materials was measured in two points under the action of the tensiometer (ETM-USA). The number of loose wires was counted along with those that remained fixed according to the different levels of force applied because of the direction of the tensile force (vertical or horizontal) and the diameter of the wire used. The data obtained were first submitted to a descriptive analysis and then submitted to a statistical analysis (Friedman's Test and Dunn's Test of Multiple Comparison - Epi-info 3.2). Within the limitations of the experimental conditions presented, the cyanoacrylate ester or 'Super Bonder (R)' maintained bonded to enamel and steel wires (0.016 and 0.018 inches) during the tensile strength tests under different levels of applied forces.

Long-term effect of carbodiimide on dentin matrix and resin-dentin bonds

Objectives: To characterize the interaction of 1-Ethyl-3-[3-dimethylaminopropyl] carbodiimide Hydrochloride (EDC) with dentin matrix and its effect on the resin-dentin bond. Methods: Changes to the stiffness of demineralized dentin fragments treated with EDC/N-hydroxysuccinimide (NHS) in different solutions were evaluated at different time points. The resistance against enzymatic degradation was indirectly evaluated by ultimate tensile strength (UTS) test of demineralized dentin treated or not with EDC/NHS and subjected to collagenase digestion. Short- and long-term evaluations of the strength of resin-dentin interfaces treated with EDC/NHS for 1 h were performed using microtensile bond strength (mu TBS) test. All data (MPa) were individually analyzed using ANOVA and Tukey HSD tests (alpha = 0.05). Results: The different exposure times significantly increased the stiffness of dentin (p < 0.0001, control-5.15 and EDC/NHS-29.50), while no differences were observed among the different solutions of EDC/NHS (p = 0.063). Collagenase challenge did not affect the UTS values of EDC/NHS group (6.08) (p > 0.05), while complete degradation was observed for the control group (p = 0.0008, control-20.84 and EDC/NHS-43.15). EDC/NHS treatment did not significantly increase resin-dentin mu TBS, but the values remained stable after 12 months water storage (p < 0.05). Conclusions: Biomimetic use of EDC/NHS to induce exogenous collagen cross-links resulted in increased mechanical properties and stability of dentin matrix and dentin-resin interfaces. (C) 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 94B: 250-255, 2010.

Dental students' knowledge of ergonomic postural requirements and their application during clinical care

Aim:To examine how much final-year undergraduate dental students know about postural dental ergonomic requirements, and how well they apply these requirements clinically.Background:Dentists are vulnerable to diverse mechanical (e.g. postural) and non-mechanical occupational risks.Materials and Methods:Eight postural requirements found in normalising documents were identified, reproduced, photographed, and analysed to develop a test of visual perception (TVP). Photographs of the 69 participating students were taken during their clinical care to ascertain ergonomics compliance, after which the students were administered the TVP. Pearson's test was used to correlate the level of knowledge (TVP) and its clinical application (photographic analysis) among the 552 observations made for each test (total of 1104 observations).Results:65.7% of the TVP questions were answered correctly and 35% of the photographic cases were in compliance with ergonomic requirements (+ 0.67, P < 0.0001).Conclusion:The knowledge of ergonomics postural requirements and their clinical application among the dental students surveyed were not satisfactory. The reasons for the learning difficulties encountered by the students should be identified to improve the learning process. The didactic use of digital images in this study may help in this endeavour.

Clinical Efficiency of Low-Level Diode Laser in Reducing Dentin Hypersensitivity

Dentin hipersensitivity (DH) is a relatively common clinical condition, especially in periodontal patients after treatment. In this study it was evaluated 28 teeth who presented dentin hypersensitivity. The teeth were subjected to clinical and radiographic exams and were divided into groups following the treatment and the time of examination after application proposed: GI: PO 3% (Potassium Oxalate-group control)/Baseline; GII: PO 3%/3 days after first session; GIII: PO 3%/6 days; GIV: PO 3%/30 days; GV: PO 3%/60 days; GVI: PO 3%/90 days; GVII: Laser (Low-level diode laser with 110 mW/cm(2))/Baseline; GVIII: Laser/7 days after first session; GIX: Laser/14 days; GX: Laser/30 days; GXI: Laser/60 days; and GXII: Laser/90 days. The groups I-VI, the teeth were subjected to 3 applications (GI-GIII) of desensitizing agent at regular intervals of seven days. The Groups VII-XI, each tooth was subjected to three applications (GVII GIX) in three different points (mesial, meddle and distal surfaces) with an interval of 72 h. The time of application in each point was of 33 s and the patients from both groups were followed up to 90 days. The nonparametric test Friedman (alpha = 0.05) was applied and the test of Mann Whitney (alpha = 0.05) was used to compare the time of examination between groups. The application of Laser was effective 6 days after first session and to PO was 30 days. It was observed that both treatments were effective for the reduction of dentin hypersensitivity, however the laser presented better effectiveness.

The Influence of Calcium Chloride on the Setting Time, Solubility, Disintegration, and pH of Mineral Trioxide Aggregate and White Portland Cement with a Radiopacifier

This study evaluated the influence of addition of 10% calcium chloride (CaCl(2)) on the setting time, solubility, disintegration, and pH of white MTA (WMTA) and white Portland cement (WPC). A test of the setting time was performed following the #57 ADA specifications and a test of the final setting time according to the ASTM. For the solubility tests disintegration and pH, Teflon rings were filled with the cements and weighed after setting. After 24 h in a desiccator, they were once again weighed. Thereafter, they were immersed in MiliQ water for 24 and 72 h and 7, 14, and 28 days, with maintenance in the desiccator and weighing between periods. The pH of water in which the rings were immersed was measured immediately after contact with them and in the other periods. The addition of CaCl(2) provided a significant reduction (50%) in the initial setting time of cements. The final setting time of WMTA was reduced in 35.5% and the final setting time of WPC in 68.5%. The WMTA with CaCl(2) absorbed water and gained weight with time, except for in the 24-h period. The addition of CaCl(2) to the WPC reduced its solubility. The addition of CaCl(2) increased the pH of WMTA in the immediate period and at 24 and 72 h and for WPC in the immediate period and at 24 h. The addition of CaCl(2) to WMTA and WPC reduced the setting times and solubility of both and increased the pH of cements in the initial periods. (J Endod 2009;35:550-554)

Seed with and without Partial Tegument Removal and Substrate Affect Germination of Castanea sativa

Portuguese chestnut (Castanea sativa) is used for forest products, raw nuts and processed flour, paste, and candy. We studied the influence on germination efficiency of seed with and without partial tegument removal combined with different substrate composition (coconut fiber, pine compost and vermiculite) at São Paulo State University, Campus of Botucatu, São Paulo, Brazil. Randomized blocks were used in a factorial scheme 3x2 (three substrates x two seed types) consisting of six treatments with five replications (twelve seeds). Seeds were sowed in expanded polystyrene trays, with 72 cells, and maintained at 25 C under controlled environment. Rate, time elapsed and speed of seed germination was submitted to ANOVA and the average compared using Tukey's 5% test of probability and curves adjusted based on Gompertz regression. Coconut fiber or vermiculite associated with seed without partial tegument removal showed the highest germination rate, and coconut fiber with or without partial tegument removal displayed the fastest speed of seed germination.

Analysis of Mortality in Africanized Honey Bee Colonies with High Levels of Infestation by Varroa destructor

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of Natural Infestations of the Mite Varroa destructor on the Development of Africanized Honeybee Workers (Apis mellifera)

The mite Varroa destructor (Anderson & Treuman 2000) has caused extensive damage to beekeeping worldwide. In Brazil, weather conditions and the strains of bees do not provide ideal conditions for mite parasitism, which is reflected in the low number of deaths of colonies caused by varroatosis well as the stability of infestation levels. The aim of this study was to evaluate the damage caused by the mite infestation in hives maintained in natural conditions. For this purpose the number of mites per bee was calculated and used to quantify the level of infestation in each colony. To record the mortality rates of parasitized bees during development daily checks were performed. The data were analyzed by G test of independence and a Test of Proportions. The results indicate that the rate of mortality of pupae and larvae was proportional to the degree of infestation in each colony, and all colonies showed mortality rates significantly higher than the control rate. A significant interaction among death rates recorded between the third and fourth days of larval life and the total death of larvae was found (G Test = 50.22; P < 0.0001). So, it can be concluded that bee inbreeding contributed significantly to the increase of the larval rate of mortality. In Africanized honeybee colonies infested by the mite Varroa destructor mortality rates in conditions of natural infestation varied from 6.65 to 9.89% in pupae (<(x)over bar>= 8.78%) and from 6.13 to 13.48% in larvae ((x) over bar = 9.91%), against 3.85% and 3.74% in the control colony, respectively. Therefore, in the infested colonies the average rates of mortality caused by the harmful effects of the mite were, respectively, 2.28 times and 2.65 times greater in those two developmental stages.

On a symmetry in strong distributions

A strong Stieltjes distribution d psi(t) is called symmetric if it satisfies the propertyt(omega) d psi(beta(2)/t) = -(beta(2)/t)(omega) d psi(t), for t is an element of (a, b) subset of or equal to (0, infinity), 2 omega is an element of Z, and beta > 0.In this article some consequences of symmetry on the moments, the orthogonal L-polynomials and the quadrature formulae associated with the distribution are given. (C) 1999 Elsevier B.V. B.V. All rights reserved.