Radiobiological model comparison of 3D conformal radiotherapy and IMRT plans for the treatment of prostate cancer

The main aim of radiotherapy is to deliver a dose of radiation that is high enough to destroy the tumour cells while at the same time minimising the damage to normal healthy tissues. Clinically, this has been achieved by assigning a prescription dose to the tumour volume and a set of dose constraints on critical structures. Once an optimal treatment plan has been achieved the dosimetry is assessed using the physical parameters of dose and volume. There has been an interest in using radiobiological parameters to evaluate and predict the outcome of a treatment plan in terms of both a tumour control probability (TCP) and a normal tissue complication probability (NTCP). In this study, simple radiobiological models that are available in a commercial treatment planning system were used to compare three dimensional conformal radiotherapy treatments (3D-CRT) and intensity modulated radiotherapy (IMRT) treatments of the prostate. Initially both 3D-CRT and IMRT were planned for 2 Gy/fraction to a total dose of 60 Gy to the prostate. The sensitivity of the TCP and the NTCP to both conventional dose escalation and hypo-fractionation was investigated. The biological responses were calculated using the Källman S-model. The complication free tumour control probability (P+) is generated from the combined NTCP and TCP response values. It has been suggested that the alpha/beta ratio for prostate carcinoma cells may be lower than for most other tumour cell types. The effect of this on the modelled biological response for the different fractionation schedules was also investigated.

Capturing Australian indigenous perception of virtual landscape

This short paper presents a means of capturing non spatial information (specifically understanding of places) for use in a Virtual Heritage application. This research is part of the Digital Songlines Project which is developing protocols, methodologies and a toolkit to facilitate the collection and sharing of Indigenous cultural heritage knowledge, using virtual reality. Within the context of this project most of the cultural activities relate to celebrating life and to the Australian Aboriginal people, land is the heart of life. Australian Indigenous art, stories, dances, songs and rituals celebrate country as its focus or basis. To the Aboriginal people the term “Country” means a lot more than a place or a nation, rather “Country” is a living entity with a past a present and a future; they talk about it in the same way as they talk about their mother. The landscape is seen to have a spiritual connection in a view seldom understood by non-indigenous persons; this paper introduces an attempt to understand such empathy and relationship and to reproduce it in a virtual environment.

Extreme sports as a precursor to environmental sustainability

Extreme sports have unfortunately gained a reputation for being risk focused and adrenaline fuelled. This perspective has obscured the place of the natural world, making extreme athletes appear to seek to conquer, compete against or defeat natural forces. In contrast, this paper explores findings from a larger hermeneutic phenomenological study that suggests extreme sports can initiate a positive change in participants’ relationships with the natural world. Data sources include first-hand accounts of extreme sports participants such as biographies, videos, papers and journals as well as interviews with ten male and five female extreme sports participants. Reports indicate that extreme sport participants develop feelings of connection to the natural world and describe themselves as being at one with the natural world or connected through a life enhancing energy. The paper draws on theoretical perspectives in ecopsychology which suggest that feeling connected to nature leads to a desire to care for the natural world and contributes to more environmentally sustainable practices.

Developing a participatory impact assessment approach and action research culture within a communication for social change organisation in Nepal

Developing an effective impact evaluation framework, managing and conducting rigorous impact evaluations, and developing a strong research and evaluation culture within development communication organisations presents many challenges. This is especially so when both the community and organisational context is continually changing and the outcomes of programs are complex and difficult to clearly identify.----- This paper presents a case study from a research project being conducted from 2007-2010 that aims to address these challenges and issues, entitled Assessing Communication for Social Change: A New Agenda in Impact Assessment. Building on previous development communication projects which used ethnographic action research, this project is developing, trailing and rigorously evaluating a participatory impact assessment methodology for assessing the social change impacts of community radio programs in Nepal. This project is a collaboration between Equal Access – Nepal (EAN), Equal Access – International, local stakeholders and listeners, a network of trained community researchers, and a research team from two Australian universities. A key element of the project is the establishment of an organisational culture within EAN that values and supports the impact assessment process being developed, which is based on continuous action learning and improvement. The paper describes the situation related to monitoring and evaluation (M&E) and impact assessment before the project began, in which EAN was often reliant on time-bound studies and ‘success stories’ derived from listener letters and feedback. We then outline the various strategies used in an effort to develop stronger and more effective impact assessment and M&E systems, and the gradual changes that have occurred to date. These changes include a greater understanding of the value of adopting a participatory, holistic, evidence-based approach to impact assessment. We also critically review the many challenges experienced in this process, including:----- • Tension between the pressure from donors to ‘prove’ impacts and the adoption of a bottom-up, participatory approach based on ‘improving’ programs in ways that meet community needs and aspirations.----- • Resistance from the content teams to changing their existing M&E practices and to the perceived complexity of the approach.----- • Lack of meaningful connection between the M&E and content teams.----- • Human resource problems and lack of capacity in analysing qualitative data and reporting results.----- • The contextual challenges, including extreme poverty, wide cultural and linguistic diversity, poor transport and communications infrastructure, and political instability.----- • A general lack of acceptance of the importance of evaluation within Nepal due to accepting everything as fate or ‘natural’ rather than requiring investigation into a problem.

Cooperation using a robotic ad hoc network made from Bluetooth, JXTA, OSGi and other commercial off the shelf (COTS) products

Abstract - Mobile devices in the near future will need to collaborate to fulfill their function. Collaboration will be done by communication. We use a real world example of robotic soccer to come up with the necessary structures required for robotic communication. A review of related work is done and it is found no examples come close to providing a RANET. The robotic ad hoc network (RANET) we suggest uses existing structures pulled from the areas of wireless networks, peer to peer and software life-cycle management. Gaps are found in the existing structures so we describe how to extend some structures to satisfy the design. The RANET design supports robot cooperation by exchanging messages, discovering needed skills that other robots on the network may possess and the transfer of these skills. The network is built on top of a Bluetooth wireless network and uses JXTA to communicate and transfer skills. OSGi bundles form the skills that can be transferred. To test the nal design a reference implementation is done. Deficiencies in some third party software is found, specifically JXTA and JamVM and GNU Classpath. Lastly we look at how to fix the deciencies by porting the JXTA C implementation to the target robotic platform and potentially eliminating the TCP/IP layer, using UDP instead of TCP or using an adaptive TCP/IP stack. We also propose a future areas of investigation; how to seed the configuration for the Personal area network (PAN) Bluetooth protocol extension so a Bluetooth TCP/IP link is more quickly formed and using the STP to allow multi-hop messaging and transfer of skills.

Being There

This 60 minute work looked to challenge traditional expectations of how dancers ‘perform’ and what it means when they are ‘themselves’ onstage. The audience was asked to sit in an ellipse on stage and the dancers were often performing quite close to them. While the audience didn’t move once the work began, the proximity to the dancers allowed them an unusual opportunity to see these dancers deconstructing their own profession and their own world of performance in an intimate environment. This was done for, and with the audience, and for some, it connected them deeply with the performers. For Georg Simmel, an early 20th Century sociologist, ‘the eye of a person discloses his own soul when he seeks to uncover that of another. What occurs in this direct mutual reciprocity is the entire field of human relationships.’ Performer authenticity, while utilised often in film and theatre, is not common in the form of dance. Because of our societal tendency toward the desire for authenticity, and its uncommon usage in dance, an inversion of this convention is one of the many tools that is available to choreographers to form deep connections with their audience and is one that is gaining popularity throughout the world as a form of connection via reality and the immediacy of live performance.

Mapping of indoor environments by robots using low-cost vision sensors

For robots to operate in human environments they must be able to make their own maps because it is unrealistic to expect a user to enter a map into the robot’s memory; existing floorplans are often incorrect; and human environments tend to change. Traditionally robots have used sonar, infra-red or laser range finders to perform the mapping task. Digital cameras have become very cheap in recent years and they have opened up new possibilities as a sensor for robot perception. Any robot that must interact with humans can reasonably be expected to have a camera for tasks such as face recognition, so it makes sense to also use the camera for navigation. Cameras have advantages over other sensors such as colour information (not available with any other sensor), better immunity to noise (compared to sonar), and not being restricted to operating in a plane (like laser range finders). However, there are disadvantages too, with the principal one being the effect of perspective. This research investigated ways to use a single colour camera as a range sensor to guide an autonomous robot and allow it to build a map of its environment, a process referred to as Simultaneous Localization and Mapping (SLAM). An experimental system was built using a robot controlled via a wireless network connection. Using the on-board camera as the only sensor, the robot successfully explored and mapped indoor office environments. The quality of the resulting maps is comparable to those that have been reported in the literature for sonar or infra-red sensors. Although the maps are not as accurate as ones created with a laser range finder, the solution using a camera is significantly cheaper and is more appropriate for toys and early domestic robots.

The exploration of consumer power in online brand communities : a comparison case study in Australia and China

Aided by the development of information technology, the balance of power in the market place is rapidly shifting from marketers towards consumers and nowhere is this more obvious than in the online environment (Denegri-Knott, Zwick, & Schroeder, 2006; Moynagh & Worsley, 2002; Newcomer, 2000; Samli, 2001). From the inception and continuous development of the Internet, consumers are becoming more empowered. They can choose what they want to click on the Internet, they can shop and transact payments, watch and download video, chat with others, be it friends or even total strangers. Especially in online communities, like-minded consumers share and exchange information, ideas and opinions. One form of online community is the online brand community, which gathers specific brand lovers. As with any social unit, people form different roles in the community and exert different effects on each other. Their interaction online can greatly influence the brand and marketers. A comprehensive understanding of the operation of this special group form is essential to advancing marketing thought and practice (Kozinets, 1999). While online communities have strongly shifted the balance of power from marketers to consumers, the current marketing literature is sparse on power theory (Merlo, Whitwell, & Lukas, 2004). Some studies have been conducted from an economic point of view (Smith, 1987), however their application to marketing has been limited. Denegri-Knott (2006) explored power based on the struggle between consumers and marketers online and identified consumer power formats such as control over the relationship, information, aggregation and participation. Her study has built a foundation for future power studies in the online environment. This research project bridges the limited marketing literature on power theory with the growing recognition of online communities among marketing academics and practitioners. Specifically, this study extends and redefines consumer power by exploring the concept of power in online brand communities, in order to better understand power structure and distribution in this context. This research investigates the applicability of the factors of consumer power identified by Denegri-Knott (2006) to the online brand community. In addition, by acknowledging the model proposed by McAlexander, Schouten, & Koenig (2002), which emphasized that community study should focus on the role of consumers and identifying multiple relationships among the community, this research further explores how member role changes will affect power relationships as well as consumer likings of the brand. As a further extension to the literature, this study also considers cultural differences and their effect on community member roles and power structure. Based on the study of Hofstede (1980), Australia and China were chosen as two distinct samples to represent differences in two cultural dimensions, namely individualism verses collectivism and high power distance verses low power distance. This contribution to the research also helps answer the research gap identified by Muñiz Jr & O'Guinn (2001), who pointed out the lack of cross cultural studies within the online brand community context. This research adopts a case study methodology to investigate the issues identified above. Case study is an appropriate research strategy to answer “how” and “why” questions of a contemporary phenomenon in real-life context (Yin, 2003). The online brand communities of “Haloforum.net” in Australia and “NGA.cn” in China were selected as two cases. In-depth interviews were used as the primary data collection method. As a result of the geographical dispersion and the preference of a certain number of participants, online synchronic interviews via MSN messenger were utilized along with the face-to-face interviews. As a supplementary approach, online observation was carried over two months, covering a two week period prior to the interviews and a six week period following the interviews. Triangulation techniques were used to strengthen the credibility and validity of the research findings (Yin, 2003). The findings of this research study suggest a new definition of power in an online brand community. This research also redefines the consumer power types and broadens the brand community model developed by McAlexander et al. (2002) in an online context by extending the various relationships between brand and members. This presents a more complete picture of how the perceived power relationships are structured in the online brand community. A new member role is discovered in the Australian online brand community in addition to the four member roles identified by Kozinets (1999), in contrast however, all four roles do not exist in the Chinese online brand community. The research proposes a model which links the defined power types and identified member roles. Furthermore, given the results of the cross-cultural comparison between Australia and China showed certain discrepancies, the research suggests that power studies in the online brand community should be country-specific. This research contributes to the body of knowledge on online consumer power, by applying it to the context of an online brand community, as well as considering factors such as cross cultural difference. Importantly, it provides insights for marketing practitioners on how to best leverage consumer power to serve brand objective in online brand communities. This, in turn, should lead to more cost effective and successful communication strategies. Finally, the study proposes future research directions. The research should be extended to communities of different sizes, to different extents of marketer control over the community, to the connection between online and offline activities within the brand community, and (given the cross-cultural findings) to different countries. In addition, a greater amount of research in this area is recommended to determine the generalizability of this study.

Implication of 3D culture system for study of prostate cancer (CaP) mediated bone metastasis

Introduction : For the past decade, three dimensional (3D) culture has served as a foundation for regenerative medicine study. With an increasing awareness of the importance of cell-cell and cell-extracellular matrix interactions which are lacking in 2D culture system, 3D culture system has been employed for many other applications namely cancer research. Through development of various biomaterials and utilization of tissue engineering technology, many in vivo physiological responses are now better understood. The cellular and molecular communication of cancer cells and their microenvironment, for instance can be studied in vitro in 3D culture system without relying on animal models alone. Predilection of prostate cancer (CaP) to bone remains obscure due to the complexity of the mechanisms and lack of proper model for the studies. In this study, we aim to investigate the interaction between CaP cells and osteoblasts simulating the natural bone metastasis. We also further investigate the invasiveness of CaP cells and response of androgen sensitve CaP cells, LNCaP to synthetic androgen.----- Method : Human osteoblast (hOB) scaffolds were prepared by seeding hOB on medical grade polycaprolactone-tricalcium phosphate (mPLC-TCP) scaffolds and induced to produce bone matrix. CaP cell lines namely wild type PC3 (PC3-N), overexpressed prostate specific antigen PC3 (PC3k3s5) and LNCaP were seeded on hOB scaffolds as co-cultures. Morphology of cells was examined by Phalloidin-DAPI and SEM imaging. Gelatin zymography was performed on the 48 hours conditioned media (CM) from co-cultures to determine matrix metalloproteinase (MMP) activity. Gene expression of hOB/LNCaP co-cultures which were treated for 48 hours with 1nM synthetic androgen R1881 were analysed by quantitative real time PCR (qRT-PCR).----- Results : Co-culture of PCC/hOB revealed that the morphology of PCCs on the tissue engineered bone matrix varied from homogenous to heterogenous clusters. Enzymatically inactive pro-MMP2 was detected in CM from hOBs and PCCs cultured on scaffolds. Elevation in MMP9 activity was found only in hOB/PC3N co-culture. hOB/LNCaP co-culture showed increase in expression of key enzymes associated with steroid production which also corresponded to an increase in prostate specific antigen (PSA) and MMP9.----- Conclusions : Upregulation of MMP9 indicates involvement of ECM degradation during cancer invasion and bone metastases. Expression of enzymes involved in CaP progression, PSA, which is not expressed in osteoblasts, demonstrates that crosstalk between PCCs and osteoblasts may play a part in the aggressiveness of CaP. The presence of steroidogenic enzymes, particularly, RDH5, in osteoblasts and stimulated expression in co-culture, may indicate osteoblast production of potent androgens, fuelling cancer cell proliferation. Based on these results, this practical 3D culture system may provide greater understanding into CaP mediated bone metastasis. This allows the role of the CaP/hOB interaction with regards to invasive property and steroidogenesis to be further explored.

Washout hole for bi-ventricular assist device (BVAD) centrifugal blood pump

The shortage of donor hearts for patients with end stage heart failure has accelerated the development of ventricular assist devices (VAD) that act as a replacement heart. Mechanical devices involving pulsatile, axial and centrifugal devices have been proposed. Recent clinical developments indicate that centrifugal devices are not only beneficial for bridge to transplantation applications, but may also aid myocardial recovery. The results of a recent study have shown that patients who received a VAD have extended lives and improved quality of life compared to recipients of drug therapy. Unfortunately 25% of these patients develop right heart failure syndrome, sepsis and multi-organ failure. It was reported that 17% of patients initially receiving an LVAD later required a right ventricular assist device (RVAD). Hence, current research focus is in the development of a bi-ventricular assist device (BVAD). Current BVAD technology is either too bulky or necessitates having to implant two pumps working independently. The latter requires two different controllers for each pump leading to the potential complication of uneven flow dynamics and the requirements for a large amount of body space. This paper illustrates the combination of the LVAD and RVAD as one complete device to augment the function of both the left and right cardiac chambers with double impellers. The proposed device has two impellers rotating in counter directions, hence eliminating the necessity of the body muscles and tubing/heart connection to restrain the pump. The device will also have two separate chambers with independent rotating impeller for the left and right chambers. A problem with centrifugal impellers is the fluid stagnation underneath the impeller. This leads to thrombosis and blood clots.This paper presents the design, construction and location of washout hole to prevent thrombus for a Bi-VAD centrifugal pump. Results using CFD will be used to illustrate the superiority of our design concept in terms of preventing thrombus formation and hemolysis.

Final report : a software diagnostic tool for evaluating distress mechanisms in bridges exposed to aggressive environments

Durability issues of reinforced concrete construction cost millions of dollars in repair or demolition. Identification of the causes of degradation and a prediction of service life based on experience, judgement and local knowledge has limitations in addressing all the associated issues. The objective of this CRC CI research project is to develop a tool that will assist in the interpretation of the symptoms of degradation of concrete structures, estimate residual capacity and recommend cost effective solutions. This report is a documentation of the research undertaken in connection with this project. The primary focus of this research is centred on the case studies provided by Queensland Department of Main Roads (QDMR) and Brisbane City Council (BCC). These organisations are endowed with the responsibility of managing a huge volume of bridge infrastructure in the state of Queensland, Australia. The main issue to be addressed in managing these structures is the deterioration of bridge stock leading to a reduction in service life. Other issues such as political backlash, public inconvenience, approach land acquisitions are crucial but are not within the scope of this project. It is to be noted that deterioration is accentuated by aggressive environments such as salt water, acidic or sodic soils. Carse, 2005, has noted that the road authorities need to invest their first dollars in understanding their local concretes and optimising the durability performance of structures and then look at potential remedial strategies.

The passionate critic

It's hard to be dispassionate about Reyner Banham. For me, and for the plethora of other people with strong opinions about Banham, his writing is compelling, and one’s connection to him as a figure quite personal. For me, frankly, he rocks. As a landscape architect, I gleaned most of my knowledge about Modern architecture from Banham. His Theory and Design in the First Machine Age, along with Rowe and Koetter’s Collage City and Venturi’s Complexity and Contradiction in Architecture were the most influential books in my library, by far. Later, as a budding “real scholar”, I was disappointed to find that, while these authors had serious credibility, the writings themselves were regarded as “polemical” – when in fact what I admired about them most was their ability and willingness to make rough groupings and gross generalizations, and to offer fickle opinions. It spoke to me of a real personal engagement and an active, participatory reading of the architectural culture they discussed. They were at their best in their witty, cutting, but generally pithy, creative prose, such as in Rowe’s extrapolation of the modern citizen as the latest “noble savage”, or Banham railing against conservative social advocates and their response to high density housing: “those who had just re-discovered ‘community’ in the slums would fear megastructure as much as any other kind of large-scale renewal program, and would see to it that the people were never ready.” Any reader of Banham will be able to find a gem that will relate, somehow, personally, to what they are doing right now. For Banham, it was all personal, and the gaps in his scholarship, rather, were the dispassionate places: “Such bias is essential – an unbiased historian is a pointless historian – because history is an essentially critical activity, a constant re-scrutiny and rearrangement of the profession.” Reyner Banham: Historian of the Immediate Future, Nigel Whiteley’s recent “intellectual biography” (the MIT Press, 2002), allowed me to revisit Banham’s passionate mode of criticism and to consider what his legacy might be. The book examines Banham’s body of work, grouped according to his various primary fascinations, as well as his relationship to contemporaneous theoretical movements, such as postmodernism. His mode of practice, as a kind of creative critic, is also considered in some depth. While there are points where the book delves into Banham’s personal life, on the whole Whiteley is very rigorous in considering and theorizing the work itself: more than 750 articles and twelve books. In academic terms, this is good practice. However, considering the entirely personal nature of Banham’s writing itself, this separation seems artificial. Banham, as he himself noted, “didn’t mind a gossip”, and often when reading the book I was curious about what was happening to him at the time. Banham’s was an amazing type of intellectual practice, and one that academics (a term he hated) could do well to learn from. While Whiteley spends a lot of time arguing for his practice to be regarded as such, and makes strong points about both the role of the critic, and the importance of journalism, rather than scholarly publishing, I found myself wondering what his study looked like. What books he had in his library. Did he smoke when he wrote? What sort of teaching load did he have? He is an inspiration to design writers and thinkers, and I, personally, wanted to know how he did it.

Art for architecture's sake?

The Architecture, Disciplinarity and the Arts symposium was organised by the Architecture. Theory, Criticism and History (ATCH) research group at the University of Queensland, run by John Macarthur and Antony Moulis, together with Andrew Leach who joined them last year and organised much of the symposium. The symposium ran for three days in a small room at the Institute of Modern Art (IMA) in Fortitude Valley, Brisbane (generously donated by director Robert Leonard), with about 40 people in attendance. Together with a long question time of an hour after every three speakers, the size of the room and the small number of people made it very different from most architecture or design conferences. The intellectual level of the symposium was high, without the speed dating aspect that one often sees at the Society of Architectural Historians, Australia and New Zealand (SAHANZ) meetings, where endless parallel sessions of short papers create an occasionally disorientating cacophony of words. The symposium was deliberately, unapologetically academic and the intimate nature of the forum made the discussion rich and collaborative, with an active audience. The title of the symposium, 'Architecture, Disciplinarity and the Arts', reflects the connection that already exists between the art history and the architectural history community in Brisbane, with both groups regularly attending each other's functions.

Dynamic Lock Synchronisation for collaborative 3D applications

In a typical collaborative application, users contends for common resources by mutual exclusion. The introduction of multi-modal environment, however, introduced problems such as frequent dropping of connection or limited connectivity speed of mobile users. This paper target 3D resources which require additional considerations such as dependency of users' manipulation command. This paper introduces Dynamic Locking Synchronisation technique to enable seamless and collaborative environment for large number of user, by combining the contention-free concepts of locking mechanism and the seamless nature of lockless design.

A news story as big as a doctoral thesis? : deploying journalistic methodology in academic research

The purpose of this paper is to identify and recommend the emergence of an academic research methodology for Journalism the academic discipline, through reviewing various journalistic methods of research – those making up a key element in such methodology. Its focus is on journalistic styles of work employed in academic contexts especially research on mass media issues. It proposes that channelling such activity into disciplined academic forms will enhance both: allowing the former to provide more durable and deeper outcomes, injecting additional energy and intensity of purpose into the latter. It will briefly consider characteristics of research methodologies and methods, generally; characteristics of the Journalism discipline, and its relationship with mass media industries and professions. The model of journalism used here is the Western liberal stream. A proposition is made, that teaching and research in universities focused on professional preparation of journalists, has developed so that it is a mature academic discipline. Its adherents are for the most part academics with background in journalistic practice, and so able to deploy intellectual skills of journalists, while also accredited with Higher Degrees principally in humanities. Research produced in this discipline area stands to show two characteristics: (a) it employs practices used generally in academic research, e.g. qualitative research methods such as ethnographic studies or participant observation, or review of documents including archived media products, and (b) within such contexts it may use more specifically journalistic techniques, e.g. interviewing styles, reflection on practice of journalism, and in creative practice research, journalistic forms of writing – highlighting journalistic / practitioner capabilities of the author. So the Journalism discipline, as a discipline closely allied to a working profession, is described as one where individual professional skills and background preparation for media work will be applicable to academic research. In this connection the core modus operandi will be the directly research-related practices of: insistent establishment of facts, adept crafting of reportage, and economising well with time. Prospective fields for continuing research are described:- work in new media; closer investigation of relations among media producers and audiences; journalism as creative practice, and general publishing by journalists, e.g. writing histories.