Avaliação das necessidades, incapacidade, qualidade de vida e satisfação com os serviços de indivíduos com esquizofrenia em Cabo Verde

RESUMO: OBJECTIVO: Avaliar as necessidades, incapacidade, qualidade de vida, satisfação com os serviços e as características sociodemográficas numa amostra de pacientes com esquizofrenia num Serviço de Psiquiatria, em Cabo Verde. MÉTODOS: Realizou-se estudo transversal com 122 doentes com recurso a instrumentos estruturados para as necessidades (CAN), incapacidade (WHODAS II), qualidade de vida (WHOQOL-BREF) e satisfação com os serviços (VSSS) e uma ficha para recolha de dados sociodemográficos. RESULTADOS: Os doentes eram maioritariamente do sexo masculino (73,8%) com uma idade média de 35,23 anos, uma escolaridade baixa (59,8%), solteiros (81.1%), residindo em meio urbano (72,1%) e desempregados (63,2%). A maioria estava a tomar medicação antipsicótica (97,5%), tinha história de internamento (76.2%), uma média de início da doença aos 23,43 anos e uma duração média de 11,80 anos. As necessidades referidas foram baixas e as facetas mais identificadas foram a informação, os subsídios e benefícios sociais, as actividades diárias, os contactos sociais e sofrimento psicológico. Cerca 20% dos participantes manifestaram uma incapacidade, sobretudo no domínio da da participação na sociedade (47,2%). A média da qualidade de vida foi 65,08 (desvio-padrão: 21,35), com o domínio psicológico a apresentar o valor mais alto (74,21, desvio-padrão: 14,87) e o ambiental o mais baixo (59,27, desvio-padrão: 15,15). A satisfação com os serviços foi avaliada de forma positiva nas dimensões satisfação global e competência dos profissionais. As dimensões informação, envolvimento dos familiares, eficácia e acesso tiveram avaliação insatisfatória. Os tipos de intervenções, com vários serviços pouco disponibilizados, tiveram uma satisfação relativa. DISCUSSÃO: Num contexto de carência, os resultados revelaram-se mais satisfatórios do que esperados, mas com grandes insuficiências no processo de cuidados. CONCLUSÃO: O estudo permitiu conhecer o processo de cuidados aos doentes com esquizofrenia e disponibilizou elementos para programas de cuidados.-----------ABSTRACT: OBJECTIVE: Assess needs, disability, quality of life, satisfaction with the services and the socio-demographic characteristics in a sample of patients with schizophrenia in a Psychiatric Service in Cape Verde. MATHODS: It was carried out a cross-sectional study with 122 patients using the structured instruments for the needs (CAN), disability (WHODAS II), quality of life (WHOQOLBREF),satisfaction with the services (VSSS) and socio-demographic data collection. RESULTS: The patients are mainly of the male sex (73.8%) with average age of 35.23 years old, low education level (59.8%), single (81.1%), living in urban area and unemployed (63.2%). Most of them were taking antipsychotic medication (97.5%), had a history of hospitalization (76.2%), an average of disease onset at 23.43 years old and an average duration of 11.80 years. The needs mentioned were low and the most identified facets were information, subsidies and social benefits, daily routines, social contacts and psychological distress. Around 20% of the participants expressed one disability, especially at the domain of the participation in the society (47.2%). The average quality of life was 65.08 (standard deviation: 21.35), with the domain of the psychological presenting the highest value (74.21, standard deviation: 14.87) and environmental the lowest (59.27, standard deviation: 15.15). The satisfaction with services was positively assessed in the dimensions of overall satisfaction and competency of the professionals. The dimensions information, family involvement, effectiveness and access had positive evaluation. The types of intervention with services poorly available had a relative satisfaction. DISCUSSION: In a context of shortage, the results were considered more satisfactory than expected, but with many inadequacies in the process of care. CONCLUSION: This study allowed to know the process of care to the patients with schizophrenia and provided elements for the programs of care.

Control system for actuation and sensing in digital microfluidics devices

Digital Microfluidics (DMF) is a second generation technique, derived from the conventional microfluidics that instead of using continuous liquid fluxes, it uses only individual droplets driven by external electric signals. In this thesis a new DMF control/sensing system for visualization, droplet control (movement, dispensing, merging and splitting) and real time impedance measurement have been developed. The software for the proposed system was implemented in MATLAB with a graphical user interface. An Arduino was used as control board and dedicated circuits for voltage switching and contacts were designed and implemented in printed circuit boards. A high resolution camera was integrated for visualization. In our new approach, the DMF chips are driven by a dual-tone signal where the sum of two independent ac signals (one for droplet operations and the other for impedance sensing) is applied to the electrodes, and afterwards independently evaluated by a lock-in amplifier. With this new approach we were able to choose the appropriated amplitudes and frequencies for the different proposes (actuation and sensing). The measurements made were used to evaluate the real time droplet impedance enabling the knowledge of its position and velocity. This new approach opens new possibilities for impedance sensing and feedback control in DMF devices.

SDAR: a package for plotting and analyzing stratigraphy data in R

Stratigraphic Columns (SC) are the most useful and common ways to represent the eld descriptions (e.g., grain size, thickness of rock packages, and fossil and lithological components) of rock sequences and well logs. In these representations the width of SC vary according to the grain size (i.e., the wider the strata, the coarser the rocks (Miall 1990; Tucker 2011)), and the thickness of each layer is represented at the vertical axis of the diagram. Typically these representations are drawn 'manually' using vector graphic editors (e.g., Adobe Illustrator®, CorelDRAW®, Inskape). Nowadays there are various software which automatically plot SCs, but there are not versatile open-source tools and it is very di cult to both store and analyse stratigraphic information. This document presents Stratigraphic Data Analysis in R (SDAR), an analytical package1 designed for both plotting and facilitate the analysis of Stratigraphic Data in R (R Core Team 2014). SDAR, uses simple stratigraphic data and takes advantage of the exible plotting tools available in R to produce detailed SCs. The main bene ts of SDAR are: (i) used to generate accurate and complete SC plot including multiple features (e.g., sedimentary structures, samples, fossil content, color, structural data, contacts between beds), (ii) developed in a free software environment for statistical computing and graphics, (iii) run on a wide variety of platforms (i.e., UNIX, Windows, and MacOS), (iv) both plotting and analysing functions can be executed directly on R's command-line interface (CLI), consequently this feature enables users to integrate SDAR's functions with several others add-on packages available for R from The Comprehensive R Archive Network (CRAN).

Co-infection and risk factors of tuberculosis in a Mexican HIV+ population

INTRODUCTION: The situation of tuberculosis (TB) is being modified by the human immunodeficiency virus (HIV), which is increasing the occurrence of new cases and the generation of drug resistant strains, affecting not only the people infected with HIV, but also their close contacts and the general population, conforming a serious public health concern. However, the magnitudes of the factors associated to this co-infection differ considerably in relation to the population groups and geographical areas. METHODS: In order to evaluate the prevalence and risk factors for the co-infection of tuberculosis (TB) in a population with human immunodeficiency virus (HIV+) in the Southeast of Mexico, we made the analysis of clinical and epidemiological variables and the diagnosis of tuberculosis by isolation of mycobacteria from respiratory samples. RESULTS: From the 147 HIV+ individuals analyzed, 12 were culture positive; this shows a prevalence of 8% for the co-infection. The only variable found with statistical significance for the co-infection was the number of CD4-T < 200 cells/mm³, OR 13 (95%, CI 2-106 vs 12-109). CONCLUSIONS: To our knowledge this is the first report describing the factors associated with tuberculosis co -infection with HIV in a population from Southern Mexico. The low number of CD4 T-cells was the only variable associated with the TB co-infection and the rest of the variables provide scenarios that require specific and particular interventions for this population group.

Reemergence of yellow fever: detection of transmission in the State of São Paulo, Brazil, 2008

INTRODUCTION: Following yellow fever virus (YFV) isolation in monkeys from the São José do Rio Preto region and two fatal human autochthonous cases from the Ribeirão Preto region, State of São Paulo, Brazil, two expeditions for entomological research and eco-epidemiological evaluation were conducted. METHODS: A total of 577 samples from humans, 108 from monkeys and 3,049 mosquitoes were analyzed by one or more methods: virus isolation, ELISA-IgM, RT-PCR, histopathology and immunohistochemical. RESULTS: Of the 577 human samples, 531 were tested by ELISA-IgM, with 3 positives, and 235 were inoculated into mice and 199 in cell culture, resulting in one virus isolation. One sample was positive by histopathology and immunohistochemical. Using RT-PCR, 25 samples were processed with 4 positive reactions. A total of 108 specimens of monkeys were examined, 108 were inoculated into mice and 45 in cell culture. Four virus strains were isolated from Alouattacaraya. A total of 931 mosquitoes were captured in Sao Jose do Rio Preto and 2,118 in Ribeirão Preto and separated into batches. A single isolation of YFV was derived from a batch of 9 mosquitoes Psorophoraferox, collected in Urupês, Ribeirão Preto region. A serological survey was conducted with 128 samples from the municipalities of São Carlos, Rincão and Ribeirão Preto and 10 samples from contacts of patients from Ribeirão Preto. All samples were negative by ELISA-IgM for YFV. CONCLUSIONS: The results confirm the circulation of yellow fever, even though sporadic, in the Sao Paulo State and reinforce the importance of vaccination against yellow fever in areas considered at risk.

Evolution of reputation in networks: A mean field game approach

This work models the competitive behaviour of individuals who maximize their own utility managing their network of connections with other individuals. Utility is taken as a synonym of reputation in this model. Each agent has to decide between two variables: the quality of connections and the number of connections. Hence, the reputation of an individual is a function of the number and the quality of connections within the network. On the other hand, individuals incur in a cost when they improve their network of contacts. The initial value of the quality and number of connections of each individual is distributed according to an initial (given) distribution. The competition occurs over continuous time and among a continuum of agents. A mean field game approach is adopted to solve the model, leading to an optimal trajectory for the number and quality of connections for each individual.

Hepatitis B virus infection in children, adolescents, and their relatives: genotype distribution and precore and core gene mutations

INTRODUCTION:The objectives of this study were evaluate hepatitis B virus (HBV) serological markers in children and adolescents followed up at the Child Institute of the Hospital das Clínicas, Faculdade de Medicina de São Paulo, Universidade de São Paulo; identify chronic HBV carriers and susceptible individuals in the intrafamilial environment; characterize HBV genotypes; and identify mutations in the patients and household contacts. METHODS: Ninety-five hepatitis B surface antigen-positive children aged <19 years and 118 household contacts were enrolled in this study. Commercial kits were used for the detection of serological markers, and PCR was used for genotyping. RESULTS: Hepatitis B e antigen (HBeAg) was detected in 66.3% (63/95) of cases. Three of the 30 HBeAg-negative and anti-HBeAg-positive patients presented with precore mutations and 11 presented with mutations in the basal core promoter (BCP). Genotype A was identified in 39 (43.8%) patients, genotype D in 45 (50.6%), and genotype C in 5 (5.6%). Of the 118 relatives, 40 were chronic HBV carriers, 52 presented with the anti-HBc marker, 19 were vaccinated, and 7 were susceptible. Among the relatives, genotypes A, D, and C were the most frequent. One parent presented with a precore mutation and 4 presented with BCP mutations. CONCLUSIONS: Genotypes A and D were the most frequent among children, adolescents, and their relatives. The high prevalence of HBV in the families showed the possibility of its intrafamilial transmission.

Diagnosis of latent Mycobacterium tuberculosis infection: tuberculin test versus interferon-gamma release

Abstract: INTRODUCTION: The treatment of individuals with active tuberculosis (TB) and the identification and treatment of latent tuberculosis infection (LTBI) contacts are the two most important strategies for the control of TB. The objective of this study was compare the performance of tuberculin skin testing (TST) with QuantiFERON-TB Gold In TUBE(r) in the diagnosis of LTBI in contacts of patients with active TB. METHODS: Cross-sectional analytical study with 60 contacts of patients with active pulmonary TB. A blood sample of each contact was taken for interferon-gamma release assay (IGRA) and subsequently performed the TST. A receiver operating characteristic curve was generated to assess the cutoff points and the sensitivity, predictive values, and accuracy were calculated. The agreement between IGRA and TST results was evaluated by Kappa coefficient. RESULTS: Here, 67.9% sensitivity, 84.4% specificity, 79.1% PPV, 75% NPV, and 76.7% accuracy were observed for the 5mm cutoff point. The prevalence of LTBI determined by TST and IGRA was 40% and 46.7%, respectively. CONCLUSIONS: Both QuantiFERON-TB Gold In TUBE(r) and TST showed good performance in LTBI diagnosis. The creation of specific diagnostic methods is necessary for the diagnosis of LTBI with higher sensitivity and specificity, preferably with low cost and not require a return visit for reading because with early treatment of latent forms can prevent active TB.

Integrative literature review of the reported uses of serological tests in leprosy management

Abstract: An integrative literature review was conducted to synthesize available publications regarding the potential use of serological tests in leprosy programs. We searched the databases Literatura Latino-Americana e do Caribe em Ciências da Saúde, Índice Bibliográfico Espanhol em Ciências da Saúde, Acervo da Biblioteca da Organização Pan-Americana da Saúde, Medical Literature Analysis and Retrieval System Online, Hanseníase, National Library of Medicine, Scopus, Ovid, Cinahl, and Web of Science for articles investigating the use of serological tests for antibodies against phenolic glycolipid-I (PGL-I), ML0405, ML2331, leprosy IDRI diagnostic-1 (LID-1), and natural disaccharide octyl-leprosy IDRI diagnostic-1 (NDO-LID). From an initial pool of 3.514 articles, 40 full-length articles fulfilled our inclusion criteria. Based on these papers, we concluded that these antibodies can be used to assist in diagnosing leprosy, detecting neuritis, monitoring therapeutic efficacy, and monitoring household contacts or at-risk populations in leprosy-endemic areas. Thus, available data suggest that serological tests could contribute substantially to leprosy management.

Electrical characterization and modification of low dimensional oxide semiconductors for sensor applications

This work reviews the recent research on ion and UV irradiation of β-

Reconfigurable photonic logic architecture

The amorphous silicon photo-sensor studied in this thesis, is a double pin structure (p(a-SiC:H)-i’(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts deposited over transparent glass thus with the possibility of illumination on both sides, responding to wave-lengths from the ultra-violet, visible to the near infrared range. The frontal il-lumination surface, glass side, is used for light signal inputs. Both surfaces are used for optical bias, which changes the dynamic characteristics of the photo-sensor resulting in different outputs for the same input. Experimental studies were made with the photo-sensor to evaluate its applicability in multiplexing and demultiplexing several data communication channels. The digital light sig-nal was defined to implement simple logical operations like the NOT, AND, OR, and complex like the XOR, MAJ, full-adder and memory effect. A pro-grammable pattern emission system was built and also those for the validation and recovery of the obtained signals. This photo-sensor has applications in op-tical communications with several wavelengths, as a wavelength detector and to execute directly logical operations over digital light input signals.

Assessing the role of social networks on migrant labor market outcomes: Evidence from a representative immigrant survey

What role do social networks play in determining migrant labor market outcomes? We examine this question using data from a random sample of 1500 immigrants living in Ireland. We propose a theoretical model formally predicting that immigrants with more contacts have additional access to job offers, and are therefore better able to become employed and choose higher paid jobs. Our empirical analysis confirms these findings, while focusing more generally on the relationship between migrants’ social networks and a variety of labor market outcomes (namely wages, employment, occupational choice and job security), contrary to the literature. We find evidence that having one more contact in the network is associated with an increase of 11pp in the probability of being employed and with an increase of about 100 euros in the average salary. However, our data is not suggestive of a network size effect on occupational choice and job security. Our findings are robust to sample selection and other endogeneity concerns.

Critical analysis of old and new vaccines against N. meningitidis serogroup C, considering the meningococcal disease epidemiology in Brazil

Worldwide, the impact of meningococcal disease is substantial, and the potential for the introduction and spread of more virulent strains of N. meningitidis or strains with increased resistance to current antibiotics causes concern, making prevention essential. OBJECTIVES: Review the indications for meningococcal disease vaccines, considering the epidemiological status in Brazil. METHODS: A critical literature review on this issue using the Medline and Lilacs databases. RESULTS: In Brazil, MenB and MenC were the most important serogroups identified in the 1990s. Polysaccharide vaccines available against those serogroups can offer only limited protection for infants, the group at highest risk for meningococcal disease. Additionally, polysaccharide vaccines may induce a hypo-responsive state to MenC. New meningococcal C conjugate vaccines could partially solve these problems, but it is unlikely that in the next few years a vaccine against MenB that can promote good protection against multiple strains of MenB responsible for endemic and epidemic diseases will become available. CONCLUSIONS: In order to make the best decision about recommendations on immunization practices, better quality surveillance data are required. In Brazil, MenC was responsible for about 2,000 cases per year during the last 10 years. New conjugate vaccines against MenC are very effective and immunogenic, and they should be recommended, especially for children less than 5 years old. Polysaccharide vaccines should be indicated only in epidemic situations and for high-risk groups. Until new vaccines against MenC and MenB are available for routine immunization programs, the most important measure for controlling meningococcal disease is early diagnosis of these infections in order to treat patients and to offer chemoprophylaxis to contacts.

Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).

Decisions of technology innovation: the role of indicators

This work presents research conducted to understand the role of indicators in decisions of technology innovation. A gap was detected in the literature of innovation and technology assessment about the use and influence of indicators in this type of decision. It was important to address this gap because indicators are often frequent elements of innovation and technology assessment studies. The research was designed to determine the extent of the use and influence of indicators in decisions of technology innovation, to characterize the role of indicators in these decisions, and to understand how indicators are used in these decisions. The latter involved the test of four possible explanatory factors: the type and phase of decision, and the context and process of construction of evidence. Furthermore, it focused on three Portuguese innovation groups: public researchers, business R&D&I leaders and policymakers. The research used a combination of methods to collect quantitative and qualitative information, such as surveys, case studies and social network analysis. This research concluded that the use of indicators is different from their influence in decisions of technology innovation. In fact, there is a high use of indicators in these decisions, but lower and differentiated differences in their influence in each innovation group. This suggests that political-behavioural methods are also involved in the decisions to different degrees. The main social influences in the decisions came mostly from hierarchies, knowledge-based contacts and users. Furthermore, the research established that indicators played mostly symbolic roles in decisions of policymakers and business R&D&I leaders, although their role with researchers was more differentiated. Indicators were also described as helpful instruments to conduct a reasonable interpretation of data and to balance options in innovation and technology assessments studies, in particular when contextualised, described in detail and with discussion upon the options made. Results suggest that there are four main explanatory factors for the role of indicators in these decisions: First, the type of decision appears to be a factor to consider when explaining the role of indicators. In fact, each type of decision had different influences on the way indicators are used, and each type of decision used different types of indicators. Results for policy-making were particularly different from decisions of acquisition and development of products/technology. Second, the phase of the decision can help to understand the role indicators play in these decisions. Results distinguished between two phases detected in all decisions – before and after the decision – as well as two other phases that can be used to complement the decision process and where indicators can be involved. Third, the context of decision is an important factor to consider when explaining the way indicators are taken into consideration in policy decisions. In fact, the role of indicators can be influenced by the particular context of the decision maker, in which all types of evidence can be selected or downplayed. More importantly, the use of persuasive analytical evidence appears to be related with the dispute existent in the policy context. Fourth and last, the process of construction of evidence is a factor to consider when explaining the way indicators are involved in these decisions. In fact, indicators and other evidence were brought to the decision processes according to their availability and capacity to support the different arguments and interests of the actors and stakeholders. In one case, an indicator lost much persuasion strength with the controversies that it went through during the decision process. Therefore, it can be argued that the use of indicators is high but not very influential; their role is mostly symbolic to policymakers and business decisions, but varies among researchers. The role of indicators in these decisions depends on the type and phase of the decision and the context and process of construction of evidence. The latter two are related to the particular context of each decision maker, the existence of elements of dispute and controversies that influence the way indicators are introduced in the decision-making process.