Acknowledging linguistic diversity in a multicultural society: the issue of indigenous languages in Colombia.

Nowadays, modern society is gradually becoming multicultural. However, only in the last few years awareness on its importance has been raised. In the case of Colombia, multiculturalism has existed since the pre-Columbian period and today there are more than 80 ethnic groups and 65 indigenous languages in the country. The aim of this work is to illustrate the status of indigenous languages in Colombia and to enlighten about the importance of recognizing, protecting and strengthening the use of these native languages. Subsequent to this, it will be point out that linguistic diversity should be considered a resource and not a barrier to achieve unity in diversity. Finally, ethno-education will be presented as an adequate educational program that may guarantee an equal linguistic representation in the country.

Increasing Utilization of US Electric Grids via Smart Technologies: Integration of Load Management, Real Time Pricing, Renewables, EVs and Smart Grid Sensors

Electric power grids throughout the world suffer from serious inefficiencies associated with under-utilization due to demand patterns, engineering design and load following approaches in use today. These grids consume much of the world’s energy and represent a large carbon footprint. From material utilization perspectives significant hardware is manufactured and installed for this infrastructure often to be used at less than 20-40% of its operational capacity for most of its lifetime. These inefficiencies lead engineers to require additional grid support and conventional generation capacity additions when renewable technologies (such as solar and wind) and electric vehicles are to be added to the utility demand/supply mix. Using actual data from the PJM [PJM 2009] the work shows that consumer load management, real time price signals, sensors and intelligent demand/supply control offer a compelling path forward to increase the efficient utilization and carbon footprint reduction of the world’s grids. Underutilization factors from many distribution companies indicate that distribution feeders are often operated at only 70-80% of their peak capacity for a few hours per year, and on average are loaded to less than 30-40% of their capability. By creating strong societal connections between consumers and energy providers technology can radically change this situation. Intelligent deployment of smart sensors, smart electric vehicles, consumer-based load management technology very high saturations of intermittent renewable energy supplies can be effectively controlled and dispatched to increase the levels of utilization of existing utility distribution, substation, transmission, and generation equipment. The strengthening of these technology, society and consumer relationships requires rapid dissemination of knowledge (real time prices, costs & benefit sharing, demand response requirements) in order to incentivize behaviors that can increase the effective use of technological equipment that represents one of the largest capital assets modern society has created.

Uses and misuses of the STROBE statement: bibliographic study

Objectives Appropriate reporting is central to the application of findings from research to clinical practice. The Strengthening the Reporting of Observational Studies in Epidemiology (STROBE) recommendations consist of a checklist of 22 items that provide guidance on the reporting of cohort, case-control and cross-sectional studies, in order to facilitate critical appraisal and interpretation of results. STROBE was published in October 2007 in several journals including The Lancet, BMJ, Annals of Internal Medicine and PLoS Medicine. Within the framework of the revision of the STROBE recommendations, the authors examined the context and circumstances in which the STROBE statement was used in the past. Design The authors searched the Web of Science database in August 2010 for articles which cited STROBE and examined a random sample of 100 articles using a standardised, piloted data extraction form. The use of STROBE in observational studies and systematic reviews (including meta-analyses) was classified as appropriate or inappropriate. The use of STROBE to guide the reporting of observational studies was considered appropriate. Inappropriate uses included the use of STROBE as a tool to assess the methodological quality of studies or as a guideline on how to design and conduct studies. Results The authors identified 640 articles that cited STROBE. In the random sample of 100 articles, about half were observational studies (32%) or systematic reviews (19%). Comments, editorials and letters accounted for 15%, methodological articles for 8%, and recommendations and narrative reviews for 26% of articles. Of the 32 observational studies, 26 (81%) made appropriate use of STROBE, and three uses (10%) were considered inappropriate. Among 19 systematic reviews, 10 (53%) used STROBE inappropriately as a tool to assess study quality. Conclusions The STROBE reporting recommendations are frequently used inappropriately in systematic reviews and meta-analyses as an instrument to assess the methodological quality of observational studies.

The Little Metropolis: Religion, Politics, & Spolia

There have been numerous councils throughout the Catholic Church?s history. From the First Council of Nicaea in 325 CE to Vatican II in 1962, only a few centuries have passed without any major church doctrinal change. Following hand in hand with changes in doctrine came the bifurcation of the Christian Church into the Roman CatholicChurch and the Orthodox Church. The first split came in 325 CE with Arianism. Arius of Alexandria and his followers did not agree with the Catholic Church?s viewpoint that the son, Jesus, should be on equal footing with the Father and the Holy Spirit. Constantine the Great brought the Arianism debate to the First Council of Nicaea,which declared Arianism a heretical religion. The following Catholic council?s decisions separated the two Churches even more, eventually creating the formal separation of the Church during the East-West Schism in the middle of the 11th century. Although the twoChurches constantly tried to unite, the Churches hit speed bumps along the way. Eventually, the 1274 Second Council of Lyons officially united the two Churches, even if only for an ephemeral time. At first glance, it might not seem that much resulted from the 1274 Second Council of Lyons. Almost immediately after the council?s ruling, the two Churches split again. Little is known as to why the 1274 Second Council of Lyons ultimately failed in its unification attempt. In this thesis, I will examine the churches of the Little Metropolis at Athens, Merbaka in the Argolid, and Agioi Theodoroi in Athens. In detailing the architectural features of these buildings, I will reconstruct the church building program in association with the 1274 Second Council of Lyons. I will also compare these churchesusing historical sources to keep the sociological, religious, political, and historical context accurate.

Will International Pursuit of the Millenium Development Goals Alleviate Poverty in Mountains?

Since September 2000, when world leaders agreed on time-bound, measurable goals to reduce extreme poverty, hunger, illiteracy, and disease while fostering gender equality and ensuring environmental sustainability, the Millennium Development Goals (MDGs) have increasingly come to dominate the policy objectives of many states and development agencies. The concern has been raised that the tight timeframe and financial restrictions might force governments to invest in the more productive sectors, thus compromising the quality and sustainability of development efforts. In the long term, this may lead to even greater inequality, especially between geographical regions and social strata. Hence people living in marginal areas, for example in remote mountain regions, and minority peoples risk being disadvantaged by this internationally agreed agenda. Strategies to overcome hunger and poverty in their different dimensions in mountain areas need to focus on strengthening the economy of small-scale farmers, while also fostering the sustainable use of natural resources, taking into consideration their multifunctionality.

The supply of complementary and alternative medicine in Swiss hospitals

OBJECTIVES: Over the past few years, a considerable increase in complementary and alternative medicine (CAM) has been observed, particularly in primary care. In contrast little is known about the supply of CAM in Swiss hospitals. This study aims at the investigation of amount and structure of CAM activities of Swiss hospitals. MATERIALS AND METHODS: We designed a cross-sectional survey using a 2-step, questionnaire- based approach acquiring overview information form hospital managers in a first questionnaire leading to detailed information on CAM usage at medical department level (head of department). This second questionnaire provides data of physician-based and non-physician-based CAM supply. RESULTS: The size of hospitals was significantly associated with the provision of CAM. 33% of the hospital managers indicated 1 or more medical doctor (MD) using CAM in their hospital compared to 37% of confirmation on department level (Kappa value 0.5). Mostly different CAM methods were applied. Acupuncture was used most frequently. However only 13 hospitals (11%) occupied more than 3 CAM MDs and only 5 hospitals had more than 2 full-time equivalents for MDs. Furthermore, 74.7% of these personnel resources were dedicated for outpatient care. In terms of CAM methods anthroposophic medicine accounted for more than half of the total personnel costs. On the other hand usage of non-physician based CAM accounted for 41% according to hospital managers compared to 64% of CAM usage according to medical departments (Kappa values 0.31). Reflexology of the foot was used most frequently. CONCLUSION: Total supply of CAM in Swiss hospitals is low and concentrates on few hospitals. Acupuncture is the widest spread discipline but anthroposophic medicine spends the most resources. The study shows that a high patient demand for CAM faces low supply in hospitals.

Effectiveness, safety and cost-effectiveness of homeopathy in general practice - summarized health technology assessment

Introduction: The Health Technology Assessment report on effectiveness, cost-effectiveness and appropriateness of homeopathy was compiled on behalf of the Swiss Federal Office for Public Health (BAG) within the framework of the 'Program of Evaluation of Complementary Medicine (PEK)'. Materials and Methods: Databases accessible by Internet were systematically searched, complemented by manual search and contacts with experts, and evaluated according to internal and external validity criteria. Results: Many high-quality investigations of pre-clinical basic research proved homeopathic high-potencies inducing regulative and specific changes in cells or living organisms. 20 of 22 systematic reviews detected at least a trend in favor of homeopathy. In our estimation 5 studies yielded results indicating clear evidence for homeopathic therapy. The evaluation of 29 studies in the domain 'Upper Respiratory Tract Infections/Allergic Reactions' showed a positive overall result in favor of homeopathy. 6 out of 7 controlled studies were at least equivalent to conventional medical interventions. 8 out of 16 placebocontrolled studies were significant in favor of homeopathy. Swiss regulations grant a high degree of safety due to product and training requirements for homeopathic physicians. Applied properly, classical homeopathy has few side-effects and the use of high-potencies is free of toxic effects. A general health-economic statement about homeopathy cannot be made from the available data. Conclusion: Taking internal and external validity criteria into account, effectiveness of homeopathy can be supported by clinical evidence and professional and adequate application be regarded as safe. Reliable statements of cost-effectiveness are not available at the moment. External and model validity will have to be taken more strongly into consideration in future studies.

An Instrument Design for Space-Based Optical Observation of Space Debris

Currently, observations of space debris are primarily performed with ground-based sensors. These sensors have a detection limit at some centimetres diameter for objects in Low Earth Orbit (LEO) and at about two decimetres diameter for objects in Geostationary Orbit (GEO). The few space-based debris observations stem mainly from in-situ measurements and from the analysis of returned spacecraft surfaces. Both provide information about mostly sub-millimetre-sized debris particles. As a consequence the population of centimetre- and millimetre-sized debris objects remains poorly understood. The development, validation and improvement of debris reference models drive the need for measurements covering the whole diameter range. In 2003 the European Space Agency (ESA) initiated a study entitled “Space-Based Optical Observation of Space Debris”. The first tasks of the study were to define user requirements and to develop an observation strategy for a space-based instrument capable of observing uncatalogued millimetre-sized debris objects. Only passive optical observations were considered, focussing on mission concepts for the LEO, and GEO regions respectively. Starting from the requirements and the observation strategy, an instrument system architecture and an associated operations concept have been elaborated. The instrument system architecture covers the telescope, camera and onboard processing electronics. The proposed telescope is a folded Schmidt design, characterised by a 20 cm aperture and a large field of view of 6°. The camera design is based on the use of either a frame-transfer charge coupled device (CCD), or on a cooled hybrid sensor with fast read-out. A four megapixel sensor is foreseen. For the onboard processing, a scalable architecture has been selected. Performance simulations have been executed for the system as designed, focussing on the orbit determination of observed debris particles, and on the analysis of the object detection algorithms. In this paper we present some of the main results of the study. A short overview of the user requirements and observation strategy is given. The architectural design of the instrument is discussed, and the main tradeoffs are outlined. An insight into the results of the performance simulations is provided.

Concept Fire Truck

A prototype Concept Fire Truck was designed using Autodesk Inventor 3D Design Software. Various pictures of old-time and toy fire trucks were utilized for this project. The prototype was printed using a 3D printer to verify that all parts of the truck would fit and work as intended.

Stereocopic Photography Encounters the Staircase

The staircase is presented as the architectural component that most potently embodies thresholds, boundaries and passages due to its diagonal orientation and essence as an intermediary zone. Connections then are made between the kinesthetic requirements of traversing a staircase and viewing a stereoscopic photograph. From this foundation, the haptic essence of stereoscopic photography is proposed as uniquely qualified medium through which to view a staircase and therefore thresholds, boundaries, and passages within architecture. Analyses of stereoviews of staircases in the Palais de Justice in Brussels, the Library of Congress in Washington, and the Palais Garnier (Opéra) in Paris close the essay.

Opportunities and limits of the ecosystem services framework in capturing the cultural dimension of sustainable regional and landscape development in protected areas

With regard to protected areas, the concepts of ecosystem services and the cultural dimension of sustainable development (SD) are increasingly under debate. This contribution analyses the role of cultural aspects within the ecosystem services framework using the Millennium Ecosystem Assessment classification as a reference. The limits of the ecosystem services framework in capturing the cultural dimension are highlighted. Potential ways of strengthening the position of cultural values within this framework are discussed.

Drivers of RFID adoption in the automotive industry

The automotive industry is confronted with increasing competition, leading to higher cost pressures and the demand to optimize production processes and value chains. Here the RFID technology promises to improve a range of processes in logistics and manufacturing. Despite its promising potential in the automotive industry, RFID has not yet made a decisive step from pilots to real-life implementations in the supply chain. Building on existing models of technology adoption, we analyze RFID adoption dynamics in the automotive industry. Building on existing IOS adoption models tailored to RFID specifics and based on ten semi-structured interviews with OEMs and suppliers, we evaluate main drivers of RFID adoption in the automotive industry. Our key findings are that the use of a coercive approach by the OEM could be redundant because of the market-driven RFID adoption among many suppliers. Furthermore, suppliers implementing RFID can now gain an early mover competitive advantage by developing higher trust in their relationship with the OEM as well as accumulating unique expertise in this area.

Architectural Developments in Sungai Tenang, 1902-2013

This paper treats the architectural developments in Sungai Tenang since the occupation by the Netherland's Indies in 1902 until the present. During this time great changes have occurred, among them the virtual disappearance of the traditional houses with carved planks. At the same time, much of the architectural developments can be described as the evolution of a still basically Austronesian house structure. Both these changes and the continuities merit close scrutiny, since they together reflect the persistence of the house as a powerful symbolic form that is capable of expressing changing social structures and cultural values. Up to the present, architecture in Sungai Tenang, in spite of its often modern outward appearance, is still by and large vernacular in the sense that its constructive means, its symbolic forms and its uses are firmly rooted in local traditions.

A new application of emulsions to measure the gravitational force on antihydrogen

We propose to build and operate a detector based on the emulsion film technology for the measurement of the gravitational acceleration on antimatter, to be performed by the AEgIS experiment (AD6) at CERN. The goal of AEgIS is to test the weak equivalence principle with a precision of 1% on the gravitational acceleration g by measuring the vertical position of the annihilation vertex of antihydrogen atoms after their free fall while moving horizontally in a vacuum pipe. With the emulsion technology developed at the University of Bern we propose to improve the performance of AEgIS by exploiting the superior position resolution of emulsion films over other particle detectors. The idea is to use a new type of emulsion films, especially developed for applications in vacuum, to yield a spatial resolution of the order of one micron in the measurement of the sag of the antihydrogen atoms in the gravitational field. This is an order of magnitude better than what was planned in the original AEgIS proposal.

State-of-the-art aortic imaging: part I - fundamentals and perspectives of CT and MRI

Over the last two decades, imaging of the aorta has undergone a clinically relevant change. As part of the change non-invasive imaging techniques have replaced invasive intra-arterial digital subtraction angiography as the former imaging gold standard for aortic diseases. Computed tomography (CT) and magnetic resonance imaging (MRI) constitute the backbone of pre- and postoperative aortic imaging because they allow for imaging of the entire aorta and its branches. The first part of this review article describes the imaging principles of CT and MRI with regard to aortic disease, shows how both technologies can be applied in every day clinical practice, offering exciting perspectives. Recent CT scanner generations deliver excellent image quality with a high spatial and temporal resolution. Technical developments have resulted in CT scan performed within a few seconds for the entire aorta. Therefore, CT angiography (CTA) is the imaging technology of choice for evaluating acute aortic syndromes, for diagnosis of most aortic pathologies, preoperative planning and postoperative follow-up after endovascular aortic repair. However, radiation dose and the risk of contrast induced nephropathy are major downsides of CTA. Optimisation of scan protocols and contrast media administration can help to reduce the required radiation dose and contrast media. MR angiography (MRA) is an excellent alternative to CTA for both diagnosis of aortic pathologies and postoperative follow-up. The lack of radiation is particularly beneficial for younger patients. A potential side effect of gadolinium contrast agents is nephrogenic systemic fibrosis (NSF). In patients with high risk of NSF unenhanced MRA can be performed with both ECG- and breath-gating techniques. Additionally, MRI provides the possibility to visualise and measure both dynamic and flow information.