Developing relational navigation to effectively understand software

Effective comprehension of complex software systems requires understanding of both the individual documents that represent software and the complex relationships that exist within and between documents. Relationships of all kinds play a vital role in a software engineer's comprehension of, and navigation within and between, software documents. User-determined relationships have the additional role of enabling the engineer to create and maintain relational documentation that cannot be generated by tools or derived from other relationships. We argue that for a software development environment to effectively support the understanding of complex software systems, relational navigation must be supported at both the document-focused (intra-document) and relation-focused (inter-document) levels. The need for a relation-focused approach is highlighted by an evaluation of an existing document-focused relational interface. We conclude with the requirements for a relation-focused approach to relational navigation. These requirements focus on the user's perspective when interacting with a collection of related documents. We define the requirements for a software development environment that effectively supports the understanding of the software documents and relationships that define a complex software system.

The Japanisation process in Malaysia

This thesis examines the empirical evidence for the transferability of Japanese soft technology (JST) or Japanese work organisation within two government-initiated, Malaysian-Japanese strategic alliances: PROTON and PERNEC. The government, through its Look East Policy (LEP) began in 1982, taking Japan (and South Korea) as models and partners in Malaysian economic and industrial development process, and expected these alliances to learn the good aspects of Japanese work organisations and management styles in order for them to become independent companies, both technologically and economically. The thesis found that the alliances have been successfully taking and utilising Japanese parts, components, tools, robots and machines; i.e. the 'ready-made hard technology'. [Whereas the important element of soft technology has been ignored]. The soft technology has been slowly and marginally transferred because neither local parties nor their Japanese counterparts within the alliances consider the acquisition or transfer of soft technology to be the main concern or a part of business plan. Although many factors influence management transfer, the thesis has focused on the eagerness and the capability of Malaysian managerial teams to acquire and, to a lesser extent, the readiness of the Japanese to transfer the technology. It was found that there is a lack of demand on technology acquisition by Malaysian managers and lack of responsibility to transfer the technology among Japanese experts. However, the political and social pressures on these alliances, the industrial climate and labour market, leaderships and management system of alliances, and Japanese MNCs regional and global corporate strategies have contributed to the high level of transfer of JST at PROTON compared to PERNEC. The research also found that Malaysian industrial and investment policies have favoured foreign investment but there is a lack of strategies for nurturing indigenous technological development.On the other hand the Japanese MNCs and public agencies have been operating in Malaysia and guided by their regional and global corporate strategies and less concerned with Malaysian technological development. In conclusion, empirically, the JST transfer is minimal. The transfer has been influenced by internal contingency factors of organisation; external industrial, political and cultural environmental factors; and last but not least the Japanese MNCs' global and regional corporate strategies. The transfer of Japanese management in this research is inclined towards core-periphery transfer model, it is also related to organisational and national technological capability.

The development of a modified dissolution method suitable for investigating powder mixtures

A novel dissolution method was developed, suitable for powder mixtures, based on the USP basket apparatus. The baskets were modified such that the powder mixtures were retained within the baskets and not dispersed, a potential difficulty that may arise when using conventional USP basket and paddle apparatus. The advantages of this method were that the components of the mixtures were maintained in close proximity, maximizing any drug:excipient interaction and leading to more linear dissolution profiles. Two weakly acidic model drugs, ibuprofen and acetaminophen, and a selection of pharmaceutical excipients, including potential dissolution-enhancing alkalizing agents, were chosen for investigation. Dissolution profiles were obtained for simple physical mixtures. The f1 fit factor values, calculated using pure drug as the reference material, demonstrated a trend in line with expectations, with several dissolution enhancers apparent for both drugs. Also, the dissolution rates were linear over substantial parts of the profiles. For both drugs, a rank order comparison between the f1 fit factor and calculated dissolution rate, obtained from the linear section of the dissolution profile, demonstrated a correlation using a significance level of P=0.05. The method was proven to be suitable for discriminating between the effects of excipients on the dissolution of the model drugs. The method design produced dissolution profiles where the dissolution rate was linear for a substantial time, allowing determination of the dissolution rate without mathematical transformation of the data. This method may be suitable as a preliminary excipient-screening tool in the drug formulation development process.

CADS*: Computer-Aided Development of self-* systems

We present the prototype tool CADS* for the computer-aided development of an important class of self-* systems, namely systems whose components can be modelled as Markov chains. Given a Markov chain representation of the IT components to be included into a self-* system, CADS* automates or aids (a) the development of the artifacts necessary to build the self-* system; and (b) their integration into a fully-operational self-* solution. This is achieved through a combination of formal software development techniques including model transformation, model-driven code generation and dynamic software reconfiguration.

The realisation of JSD specifications in object oriented languages

Jackson System Development (JSD) is an operational software development method which addresses most of the software lifecycle either directly or by providing a framework into which more specialised techniques can fit. The method has two major phases: first an abstract specification is derived that is in principle executable; second the specification is implemented using a variety of transformations. The object oriented paradigm is based on data abstraction and encapsulation coupled to an inheritance architecture that is able to support software reuse. Its claims of improved programmer productivity and easier program maintenance make it an important technology to be considered for building complex software systems. The mapping of JSD specifications into procedural languages typified by Cobol, Ada, etc., involves techniques such as inversion and state vector separation to produce executable systems of acceptable performance. However, at present, no strategy exists to map JSD specifications into object oriented languages. The aim of this research is to investigate the relationship between JSD and the object oriented paradigm, and to identify and implement transformations capable of mapping JSD specifications into an object oriented language typified by Smalltalk-80. The direction which the transformational strategy follows is one whereby the concurrency of a specification is removed. Two approaches implementing inversion - an architectural transformation resulting in a simulated coroutine mechanism being generated - are described in detail. The first approach directly realises inversions by manipulating Smalltalk-80 system contexts. This is possible in Smalltalk-80 because contexts are first class objects and are accessible to the user like any other system object. However, problems associated with this approach are expounded. The second approach realises coroutine-like behaviour in a structure called a `followmap'. A followmap is the results of a transformation on a JSD process in which a collection of followsets is generated. Each followset represents all possible state transitions a process can undergo from the current state of the process. Followsets, together with exploitation of the class/instance mechanism for implementing state vector separation, form the basis for mapping JSD specifications into Smalltalk-80. A tool, which is also built in Smalltalk-80, supports these derived transformations and enables a user to generate Smalltalk-80 prototypes of JSD specifications.

Marketing strategy and new product development in the UK credit card industry

The development of new products in today's marketing environment is generally accepted as a requirement for the continual growth and prosperity of organisations. The literature is consequently rich with information on the development of various aspects of good products. In the case of service industries, it can be argued that new service product development is of as least equal importance as it is to organisations that produce tangible goods products. Unlike the new goods product literature, the literature on service marketing practices, and in particular, new service product development, is relatively sparse. The main purpose of this thesis is to examine a number of aspects of new service product development practice with respect to financial services and specifically, credit card financial services. The empirical investigation utilises both a case study and a survey approach, to examine aspects of new service product development industry practice relating specifically to gaps and deficiencies in the literature with respect to the financial service industry. The findings of the empirical work are subsequently examined in the context in which they provide guidance and support for a new normative new service product development model. The study examines the UK credit card financial service product sector as an industry case study and perspective. The findings of the field work reveal that the new service product development process is still evolving, and that in the case of credit card financial services can be seen as a well-structured and well-documented process. New product development can also be seen as an incremental, complex, interactive and continuous process which has been applied in a variety of ways. A number of inferences are subsequently presented.

Lead time reduction for new products

The research, which was given the terms of reference, "To cut the lead time for getting new products into volume production", was sponsored by a company which develops and manufactures telecommunications equipment. The research described was based on studies made of the development of two processors which were designed to control telephone exchanges in the public network. It was shown that for each of these products, which were large electronic systems containing both hardware and software, most of their lead time was taken up with development. About half of this time was consumed by activities associated with redesign resulting from changes found to be necessary after the original design had been built. Analysing the causes of design changes showed the most significant to be Design Faults. The reasons why these predominated were investigated by seeking the collective opinion from design staff and their management using a questionnaire. Using the results from these studies to build upon the works of other authors, a model of the development process of large hierarchical systems is derived. An important feature of this model is its representation of iterative loops due to design changes. In order to reduce the development time, two closely related philosophies are proposed: By spending more time at the early stages of development (detecting and remedying faults in the design) even greater savings can be made later on, The collective performance of the development organisation would be improved by increasing the amount and speed of feedback about that performance. A trial was performed to test these philosophies using readily available techniques for design verification. It showed that about an 11 per cent saving would be made on the development time and that the philosophies might be equally successfully applied to other products and techniques.

Vision2020 and the English language : a study of the role of language in national development.

The research reported here is an investigation into the problems of social and economic development of a multiethic and multicultural country which has the added challenge of adopting a non-indigenous code to facilitate the development process. Malaysia's power to negotiate outcomes favourable to the interest of the country is critical for the successful attainment of the goals and objectives of VISION2020. Therefore the mechanisms of the human resource development programme have to be efficacious. The three hypotheses of this study are as follows: 1. there is a fear that the problems and challenges posed by the development plans, have been conceptually trivialised; 2. based on (1) above there is a concern that solutions proposed are inadequate and inappropriate and 3. the outcome of both (1) and (2) can lead to the potential underachievement of national goals and objectives. The study proposes a complex model for conceptualising the problem which looks at the relationship between society and language, which any solutions proposed must take into proper consideration. The study looks at the mechanisms available for the smooth absorption of new Malaysian members to new and international communities. A large scale investigation was undertaken with the researcher functioning as a participant observer. An in-depth study of one particular educational ecology yielded approximately 38 hours of interviews and 100 questionnaires. These data were analysed both for explicit information and implicit implications. By some criteria national policies appear to be having the desired effect, and can be given a clean bill of health. By others it is clear that major adjustments would be necessary if the nation is to achieve its objectives in full. Based on the evidence gathered, thr study proposes an apprenticeship approach to training programmes for effective participation of new members in the new ecologies.

User interface design support for the development of knowledge-based systems

The present scarcity of operational knowledge-based systems (KBS) has been attributed, in part, to an inadequate consideration shown to user interface design during development. From a human factors perspective the problem has stemmed from an overall lack of user-centred design principles. Consequently the integration of human factors principles and techniques is seen as a necessary and important precursor to ensuring the implementation of KBS which are useful to, and usable by, the end-users for whom they are intended. Focussing upon KBS work taking place within commercial and industrial environments, this research set out to assess both the extent to which human factors support was presently being utilised within development, and the future path for human factors integration. The assessment consisted of interviews conducted with a number of commercial and industrial organisations involved in KBS development; and a set of three detailed case studies of individual KBS projects. Two of the studies were carried out within a collaborative Alvey project, involving the Interdisciplinary Higher Degrees Scheme (IHD) at the University of Aston in Birmingham, BIS Applied Systems Ltd (BIS), and the British Steel Corporation. This project, which had provided the initial basis and funding for the research, was concerned with the application of KBS to the design of commercial data processing (DP) systems. The third study stemmed from involvement on a KBS project being carried out by the Technology Division of the Trustees Saving Bank Group plc. The preliminary research highlighted poor human factors integration. In particular, there was a lack of early consideration of end-user requirements definition and user-centred evaluation. Instead concentration was given to the construction of the knowledge base and prototype evaluation with the expert(s). In response to this identified problem, a set of methods was developed that was aimed at encouraging developers to consider user interface requirements early on in a project. These methods were then applied in the two further projects, and their uptake within the overall development process was monitored. Experience from the two studies demonstrated that early consideration of user interface requirements was both feasible, and instructive for guiding future development work. In particular, it was shown a user interface prototype could be used as a basis for capturing requirements at the functional (task) level, and at the interface dialogue level. Extrapolating from this experience, a KBS life-cycle model is proposed which incorporates user interface design (and within that, user evaluation) as a largely parallel, rather than subsequent, activity to knowledge base construction. Further to this, there is a discussion of several key elements which can be seen as inhibiting the integration of human factors within KBS development. These elements stem from characteristics of present KBS development practice; from constraints within the commercial and industrial development environments; and from the state of existing human factors support.

The role of manufacturing and market managers in strategy development:lessons from three companies

According to researchers and managers, there is a lack of agreement between marketing and manufacturing managers on critical strategic issues. However, most of the literature on the subject is anecdotal and little formal empirical research has been done. Three companies are investigated to study the extent of agreement/disagreement between manufacturing and marketing managers on strategy content and process. A novel method permits the study of agreement between the two different functional managers on the process of developing strategy. The findings consistently show that manufacturing managers operate under a wider range of strategic priorities than marketing managers, and that manufacturing managers participate less than marketing managers in the strategy development process. Further, both marketing and manufacturing managers show higher involvement in the strategy development process in the latter stages of the Hayes and Wheelwright four-stage model of manufacturing’s strategic role.

Enhanced semantic access to formal software models

The success of the Semantic Web, as the next generation of Web technology, can have profound impact on the environment for formal software development. It allows both the software engineers and machines to understand the content of formal models and supports more effective software design in terms of understanding, sharing and reusing in a distributed manner. To realise the full potential of the Semantic Web in formal software development, effectively creating proper semantic metadata for formal software models and their related software artefacts is crucial. In this paper, a methodology with tool support is proposed to automatically derive ontological metadata from formal software models and semantically describe them.

Innovation in leadership development

In the light of the financial crisis and the radically changed conditions in the market place, international leadership development is facing new demands. The Danish-based International Leadership Institute Mannaz has researched the new conditions in collaboration with the Institute of Executive Development in the United States. The research, conducted in 2008 and 2009, combines, in an innovative way, quantitative and qualitative inputs, from both current and future perspectives, from some 111 senior Corporate Executives, Heads of Human Resources and of Learning and Organisational Development in large international corporations headquartered in Europe and the United States; together with the thoughts of some 50 experienced practitioners involved in executive coaching as well as in designing, developing and facilitating leadership development programmes. Also we include a section summarising the key findings from recently published research from other leadership development surveys. Conclusions reveal that the crisis has propelled a long-awaited decline of the traditional classroom-based educational approach to leadership development. Instead, effective leadership development is suggested to build on experiential learning approaches rooted in real life, real time and allowing for more immediate impact and providing for considerably higher relevance and motivation. Coaching, leaders teaching leaders, stretch assignments, action learning, peer networking, customer insights and selective use of technology are seen as important contributors to the leadership development process going forward.

Application of genomics, proteomics and metabolomics in drug discovery, development and clinic

Genomics, proteomics and metabolomics are three areas that are routinely applied throughout the drug-development process as well as after a product enters the market. This review discusses all three 'omics, reporting on the key applications, techniques, recent advances and expectations of each. Genomics, mainly through the use of novel and next-generation sequencing techniques, has advanced areas of drug discovery and development through the comparative assessment of normal and diseased-state tissues, transcription and/or expression profiling, side-effect profiling, pharmacogenomics and the identification of biomarkers. Proteomics, through techniques including isotope coded affinity tags, stable isotopic labeling by amino acids in cell culture, isobaric tags for relative and absolute quantification, multidirectional protein identification technology, activity-based probes, protein/peptide arrays, phage displays and two-hybrid systems is utilized in multiple areas through the drug development pipeline including target and lead identification, compound optimization, throughout the clinical trials process and after market analysis. Metabolomics, although the most recent and least developed of the three 'omics considered in this review, provides a significant contribution to drug development through systems biology approaches. Already implemented to some degree in the drug-discovery industry and used in applications spanning target identification through to toxicological analysis, metabolic network understanding is essential in generating future discoveries.

Developing a knowledge-based perspective on coordination:the case of global software projects

We have attempted to bring together two areas which are challenging for both IS research and practice: forms of coordination and management of knowledge in the context of global, virtual software development projects. We developed a more comprehensive, knowledge-based model of how coordination can be achieved, and\illustrated the heuristic and explanatory power of the model when applied to global software projects experiencing different degrees of success. We first reviewed the literature on coordination and determined what is known about coordination of knowledge in global software projects. From this we developed a new, distinctive knowledge-based model of coordination, which was then employed to analyze two case studies of global software projects, at SAP and Baan, to illustrate the utility of the model.

Trends, challenges and opportunities for performance engineering with modern business software

The author looks at trends in software and systems, and the current and likely implications of these trends on the discipline of performance engineering. In particular, he examines software complexity growth and its consequences for performance engineering for enhanced understanding, more efficient analysis and effective performance improvement. The pressures for adaptive and autonomous systems introduce further opportunities for performance innovation. The promise of aspect oriented software development technologies for assisting with some of these challenges is introduced.