Biology and shell relationship in Clibanarius vittatus (Bosc, 1802) (Crustacea, Diogenidae) from Sao Vicente, SP, Brasil.

This study aimed to characterize the populational structure of Clibanarius vittatus (Bosc, 1802), as well as to determine the morphometric relations between the animal's size and the variables: length of their chelar propodus and the size of the shell opening. C. vittatus is a relatively abundant pagurid on the west Atlantic coast, it occurs in the intertidal region from 38 degrees N to 28 degrees S. The animals in this study were randomly sampled every month on the Paranapu (a) over tilde Beach (46 degrees 23' S e 23 degrees 59' W), S (a) over tilde $ o Vicente (SP), Brazil. The biometrics data were adjusted to the power equation (y = ax(b)), by means of the minimum square method. A total of 427 individuals were collected. The size of the cephalothoraxic shield ranged from 2.5 to 12.7 mm, evidencing a representative sample of the population. The of most commonly genus of Gastropoda shells occupied by the hermits was Thais (97,26%). In relation to the morphometric analyses performed, it was observed a positive correlation between the animal size and the variables length of the chelar propodus and the size of the shells.

Patterns of shell utilization in Petrochirus diogenes (Decapoda, Anomura, Diogenidae) in the Ubatuba region, São Paulo, Brazil

The objective of this study is to investigate the patterns of shell utilization in Petrochirus diogenes in the Ubatuba region, SP, Brazil. Hermit crabs were obtained from 1993 to 1996 with the aid of a shrimp fishery boat equipped with two double-rigged trawling nets. Shells were identified and weighed, and their maximum aperture width was measured. Hermit crabs were weighed, and their shield length was recorded. A total of 634 P. diogenes specimens, occupying shells of 12 gastropod species, was obtained. The shells of Tonna galea, Zidona dufresnei and Strombus pugilis were the most frequently occupied, the first marked by its larger aperture width and lower average weight. Small hermit crabs inhabited a wide variety of gastropod shells due to their higher availability. However, the utilization of T. galea shells became predominant as the crabs attained larger sizes. Differences in weight and aperture width are known to encourage certain shell utilization patterns and may affect growth and reproduction of hermit crabs.

Tafonomia de tempestitos conchíferos amalgamados da formação Teresina em Rio Preto (Estado do Paraná, permiano médio, bacia do Paraná) e suas implicações paleoambientais

The deposits of the Permian Teresina Formation are mainly characterized by fi ne-grained siliciclastic rocks and centimetric intercalations of tempestites (bioclastic sandstones and coquinas). Despite the relevance of the bivalve-rich carbonate beds of the Teresina Formation to paleoenvironmental studies, their taphonomy is still poorly studied. The fossil concentration studied in this work was found in a quarry in the city of Irati, Rio Preto district, Parana State. The fossil concentration is located in the middle/upper portion of the unit, far from the top. The studied bed is a bioclastic, intraclastic, peloidal, grainstone/ packstone, with abundant bivalve shell fragments, pelitic and micritic intraclasts, peloids, rare ooids and oncoids, as well as permineralized of Lycophyta microphylles and fish scales. The grains of this carbonate concentration show: high degree of time-averaging, variable degree of packing (dense to disperse), no sorting and chaotic orientation. Notably, the concentration includes a mixture of elements which are indicative of: a) restrictive, low energy, carbonate environment (peloids, ooids and oncoids); b) subaerial environment surrounding the main body of water (Lycophyta microphylles) and c) quiet-water environment punctuated by storm events, where the suspension-feeding bivalves thrived. At least four depositional events caused by storm fl ows were recorded. The amalgamated nature of the bed is a result of storm events in an intracratonic basin with very low seafl oor slope and low rates of sedimentation and subsidence.

Shell beds as paleoecological puzzles: A case study from the Upper Permian of the Parana Basin, Brazil

Microstratigraphic, sedimentological, and taphonomic features of the Ferraz Shell Bed, from the Upper Permian (Kazanian-Tatarian?) Corumbatai Formation of Rio Claro Region (the Parana Basin, Brazil), indicate that the bed consists of four distinct microstratigraphic units. They include, from bottom to top, a lag concentration (Unit 1), a partly reworked storm deposit (Unit 2), a rapidly deposited sandstone unit with three thin horizons recording episodes of reworking (Unit 3), and a shell-rich horizon generated by reworking/winnowing that was subsequently buried by storm-induced obrution deposit (Unit 4). The bioclasts of the Ferraz Shell Bed represent exclusively bivalve mollusks. Pinzonella illusa and Terraia aequilateralis are the dominant species. Taphonomic analysis indicates that mollusks are heavily time-averaged (except for some parts of Unit 3). Moreover, different species are time-averaged to a different degree (disharmonious time-averaging). The units differ statistically from one another in their taxonomic and ecological composition, in their taphonomic pattern, and in the size-frequency distributions of the two most common species. Other Permian shell beds of the Parana Basin are similar to the Ferraz Shell Bed in their faunal composition (they typically contain similar sets of 5 to 10 bivalve species) and in their taphonomic, sedimentologic, and microstratigraphic characteristics. However, rare shell beds that include 2-3 species only and are dominated by articulated shells preserved in life position also occur. Diversity levels in the Permian benthic associations of the Parana Basin were very low, with the point diversity of 2-3 species and with the within-habitat and basin-wide (alpha and gamma) diversities of 10 species, at most. The Parana Basin benthic communities may have thus been analogous to low-diversity bivalve-dominated associations of the present-day Baltic Sea. The 'Ferraz-type' shell beds of the Parana Basin represent genetically complex and highly heterogeneous sources of paleontological data. They are cumulative records of spectra of benthic ecosystems time-averaged over long periods of time (10(2)-10(4) years judging from actualistic research). Detailed biostratinomic reconstructions of shell beds can not only offer useful insights into their depositional histories, but may also allow paleoecologists to optimize their sampling designs, and consequently, refine paleoecological and paleoenvironmental interpretations.

A simple method for estimating global DNA methylation using bisulfite PCR of repetitive DNA elements

We report a method for studying global DNA methylation based on using bisulfite treatment of DNA and simultaneous PCR of multiple DNA repetitive elements, such as Alu elements and long interspersed nucleotide elements (LINE). The PCR product, which represents a pool of approximately 15000 genomic loci, could be used for direct sequencing, selective restriction digestion or pyrosequencing, in order to quantitate DNA methylation. By restriction digestion or pyrosequencing, the assay was reproducible with a standard deviation of only 2% between assays. Using this method we found that almost two-thirds of the CpG methylation sites in Alu elements are mutated, but of the remaining methylation target sites, 87% were methylated. Due to the heavy methylation of repetitive elements, this assay was especially useful in detecting decreases in DNA methylation, and this assay was validated by examining cell lines treated with the methylation inhibitor 5-aza-2'deoxycytidine (DAC), where we found a 1-16% decrease in Alu element and 18-60% LINE methylation within 3 days of treatment. This method can be used as a surrogate marker of genome-wide methylation changes. In addition, it is less labor intensive and requires less DNA than previous methods of assessing global DNA methylation.

Copy number of P elements, KP/full-sized P element ratio and their relationships with environmental factors in Brazilian Drosophila melanogaster populations

The P transposable element copy numbers and the KP/full-sized P element ratios were determined in eight Brazilian strains of Drosophila melanogaster. Strains from tropical regions showed lower overall P element copy numbers than did strains from temperate regions. Variable numbers of full-sized and defective elements were detected, but the full-sized P and KP elements were the predominant classes of elements in all strains. The full-sized P and KP element ratios were calculated and compared with latitude. The northernmost and southernmost Brazilian strains showed fewer full-sized elements than KP elements per genome, and the strains from less extreme latitudes had many more full-sized P than KP elements. However, no clinal variation was observed. Strains from different localities, previously classified as having P cytotype, displayed a higher or a lower proportion of KP elements than of full-sized P elements, as well as an equal number of the two element types, showing that the same phenotype may be produced by different underlying genomic components of the P-M system.

Losing identity: structural diversity of transposable elements belonging to different classes in the genome of Anopheles gambiae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

General massive one-loop off-shell three-point functions

In this work we compute the most general massive one-loop off-shell three-point vertex in D-dimensions, where the masses, external momenta and exponents of propagators are arbitrary. This follows our previous paper in which we have calculated several new hypergeometric series representations for massless and massive (with equal masses) scalar one-loop three-point functions, in the negative dimensional approach.

Ten-dimensional super-Yang-Mills with nine off-shell supersymmetries

After adding 7 auxiliary scalars to the d = 10 super-Yang-Mills action, 9 of the 16 supersymmetries close off-shell. In this Letter, these 9 supersymmetry generators are related by dimensional reduction to scalar and vector topological symmetry in N = 2, d = 8 twisted super-Yang-Mills. Furthermore, a gauge-invariant superspace action is constructed for d = 10 super-Yang-Mills where the superfelds depend on 9 anticommuting theta variables. (c) 2007 Published by Elsevier B.V.

Dipolar Bose-Einstein condensate in a ring or in a shell

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Hydrothermal rare earth elements mineralization in the Barra do Itapirapua carbonatite, southern Brazil: behaviour of selected trace elements and stable isotopes (C, O)

The Bura do Itapira pua carbonatite is located in southern Brazil and belongs to the Cretaceous Ponta Grossa alkaline-carbonatitic province related to the opening of the South Atlantic. The carbonatite complex is emplaced in Proterozoic granites and is mainly composed of plutonic magnesio- to ferrocarbonatite, with smaller amounts of subvolcanic magnesiocarbonatite. Hydrothermal alteration of the carbonatite has led to the formation of quartz, apatite, fluorite, rue earth fluorocarbonates, barite and sulfides in variable proportions. Trace element data, delta(13)C and delta(18)O are presented here, with the aim of better understanding the geochemical nature of hydrothermal alteration related to rare earth elements (REE) mineralization. The non-overprinted plutonic carbonatite shows the lowest REE contents, and its primitive carbon and oxygen stable isotopic composition places it in the field of primary igneous carbonatites. Two types of hydrothermally overprinted plutonic carbonatites can be distinguished based on secondary minerals and geochemical composition. Type I contains mainly quartz, rare earth fluorocarbonates and apatite as hydrothermal secondary minerals, and has steep chondrite normalized REE patterns, with Sigma(REE+Y) of up to 3 wt.% (i.e., two orders of magnitude higher than in fresh plutonic samples). In contrast, the Type II overprint contains apatite, fluorite and barite as dominant hydrothermal minerals, and is characterized by heavy REE enrichment relative to the fresh samples, with flat chondrite normalized REE patterns. Carbon and oxygen stable isotope ratios of Types I and II are elevated (delta(18)O + 8 to + 12 parts per thousand; delta(13)C - 6 to - 2 parts per thousand) relative to the fresh samples. Hydrothermally overprinted carbonatites exposed to weathering show even higher delta(18)O values (delta(18)O 13 to 25 parts per thousand) but no additional REE enrichment. The subvolcanic carbonatite has anomalously high delta(13)C of up to + 1 parts per thousand, which suggests crustal contamination through interaction with carbonate-bearing metasediments. (C) 1999 Elsevier B.V. B.V. All rights reserved.

Preference ratios for mercury and other chemical elements in the Madeira River, Brazil

Samples of water, suspended solids, and bottom sediments from the Madeira River, Rondonia state, Brazil, were physically and chemically analyzed to investigate the actual Hg mobilization in the aquatic environment and compare it with that of other heavy metals and elements in the area. Two dimensionless Hg preference ratios were defined, expressing (1) the ratio of Hg and other elements in the liquid phase divided by the ratio of Hg and other elements in bottom sediments (P(l.phase)) and (2) the ratio of Hg and other elements in the particulate matter divided by the ratio of Hg and other elements in bottom sediments (P(s.solids)). These preference ratios are useful for comparing Hg transport in three different phases (liquid, particulate matter, and bottom sediments). They also were applicable to any analyzed elementin the area studied, because they generated an almost constant value when the maximum calculated was divided by the minimum (P(l.phase) = 2931; P(s.solids) = 84) and because of their sensitivity to the dominance of sorption processes by Fe oxides and hydroxides. Mercury could be transported preferentially to other analyzed elements in the particulate phase only if its concentration reached values at least 10(4)-fold higher than those expected or quantified in the area. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Iron Oxide Versus Fe55Pt45/Fe3O4: Improved Magnetic Properties of Core/Shell Nanoparticles for Biomedical Applications

In this paper, synthesis of the Fe55Pt45/Fe3O4 core/shell structured nanoparticles using the modified polyol process combined with the seed-mediated growth method is reported. Iron oxide shell thickness was tuned controlling the Fe(acac)(3)/FePt seeds in the reaction medium. Annealing of the core/shell structure leads to iron-rich layer formation around the hard FePt phase in the nanoparticle core. However, the 2 nm Fe3O4 shell thickness seems to be the limit to obtain the enhanced magnetization close to the alpha-Fe and preserving an iron oxide shell after annealing at 500 degrees C for 30 min in a reducing atmosphere. The presence of both the oxide layer on nanoparticle surface and an intermediate iron-rich FePt layer after annealing promote strong decreases in the coercive field of the 2-nm-oxide shell thickness. These annealed nanoparticles were functionalized with dextran, presenting the enhanced characteristics for biomedical applications such as higher magnetization, very low coercivity, and a slightly iron oxide passivated layer, which leads an easy functionalization and decreases the nanoparticle toxicity.

Multifunctional antitumor magnetite/chitosan-l-glutamic acid (core/shell) nanocomposites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Simultaneous Determination of Two Groups of Elements in Milk by Electrothermal Atomic Absorption Spectrometry: Evaluation of Ruthenium Modifiers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)