912 resultados para Rotter I-E test


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Background: Rabies causes 55, 000 annual human deaths globally and about 10,000 people are exposed annually in Nigeria. Diagnosis of animal rabies in most African countries has been by direct microscopic examination. In Nigeria, the Seller’s stain test (SST) was employed until 2009. Before then, both SST and dFAT were used concurrently until the dFAT became the only standard method. Objective: This study was designed to assess the sensitivity and specificity of the SST in relation to the ‘gold standard’ dFAT in diagnosis of rabies in Nigeria. Methods: A total of 88 animal specimens submitted to the Rabies National Reference Laboratory, Nigeria were routinely tested for rabies by SST and dFAT. Results: Overall, 65.9% of the specimens were positive for rabies by SST, while 81.8% were positive by dFAT. The sensitivity of SST in relation to the gold standard dFAT was 81.0% (95% CIs; 69.7% - 88.6%), while the specificity was 100% (95% CIs; 76% - 100%). Conclusion: The relatively low sensitivity of the SST observed in this study calls for its replacement with the dFAT for accurate diagnosis of rabies and timely decisions on administration of PEP to prevent untimely deaths of exposed humans.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The rural electrification is characterized by geographical dispersion of the population, low consumption, high investment by consumers and high cost. Moreover, solar radiation constitutes an inexhaustible source of energy and in its conversion into electricity photovoltaic panels are used. In this study, equations were adjusted to field conditions presented by the manufacturer for current and power of small photovoltaic systems. The mathematical analysis was performed on the photovoltaic rural system I- 100 from ISOFOTON, with power 300 Wp, located at the Experimental Farm Lageado of FCA/UNESP. For the development of such equations, the circuitry of photovoltaic cells has been studied to apply iterative numerical methods for the determination of electrical parameters and possible errors in the appropriate equations in the literature to reality. Therefore, a simulation of a photovoltaic panel was proposed through mathematical equations that were adjusted according to the data of local radiation. The results have presented equations that provide real answers to the user and may assist in the design of these systems, once calculated that the maximum power limit ensures a supply of energy generated. This real sizing helps establishing the possible applications of solar energy to the rural producer and informing the real possibilities of generating electricity from the sun.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

El objetivo de este estudio fue determinar la relación cráneo cervical en pacientes clases I, II y III esqueletal entre 9 y 18 años de edad, mediante radiografías cefálicas laterales de un centro radiológico de la ciudad de Cuenca, utilizando el análisis cráneo cervical propuesto por Rocabado. Materiales y métodos: Fueron analizadas 161 radiografías cefálicas laterales digitales, de ambos sexos, con edad promedio de 12.3 años (DE± 2.4). Se incluyeron radiografías de individuos con dentición mixta y permanente, sin tratamiento ortodóncico y en donde se observe hasta la sexta vértebra cervical. Fueron excluidas las radiografías de pacientes con mordida abierta, traumatismos maxilofaciales y radiografías de mala calidad. Las telerradiografías fueron analizadas mediante el programa cefalométrico Nemoceph NX, donde se determinó el patrón esqueletal mediante los ángulos SNA, SNB, ANB y APDI. La evaluación de la postura cervical, se realizó mediante el análisis cráneo cervical propuesto por Rocabado. Se obtuvo el índice de concordancia (ICC=0.94). Mediante estadística descriptiva se analizaron las relaciones entre variables usando la prueba de Chi cuadrado y T de Student. Resultados: Se encontró mayor rotación posterior de cráneo en clase I y II esqueletal, encontrándose diferencias estadísticamente significativas respecto al ángulo cráneo vertebral entre hombres y mujeres en individuos clase II esqueletal. Las mujeres presentaron mayor rotación posterior de cráneo a diferencia de los hombres. (p=0.004). En clase III se encontró una relación normal. El espacio suboccipital en las tres clases esqueletales se presento con normalidad. No se encontró diferencia significativa respecto a la edad. Conclusiones: La relación cráneo cervical se presenta con una tendencia a la rotación posterior de cráneo, influida fuertemente por el sexo del individuo. El espacio suboccipital es normal en clase I y II esqueletal y con tendencia al aumento en clase III.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Nickel-containing catalysts are developed to oligomerize light olefins. Two nickel-containing zincosilicates (Ni-CIT-6 and Ni-Zn-MCM-41) and two nickel-containing aluminosilicates (Ni-HiAl-BEA and Ni-USY) are synthesized as catalysts to oligomerize propylene into C3n (C6 and C9) products. All catalysts oligomerize propylene, with the zincosilicates demonstrating higher average selectivities to C3n products, likely due to the reduced acidity of the Zn heteroatom.

To test whether light alkanes can be incorporated into this oligomerization reaction, a supported homogeneous catalyst is combined with Ni-containing zincosilicates. The homogeneous catalyst is included to provide dehydrogenation/hydrogenation functions. When this tandem catalyst system is evaluated using a propylene/n-butane feed, no significant integration of alkanes are observed.

Ni-containing zincosilicates are reacted with 1-butene and an equimolar propylene/1-butene mixture to study other olefinic feeds. Further, other divalent metal cations such as Mn2+, Co2+, Cu2+, and Zn2+ are exchanged onto CIT-6 samples to investigate stability and potential use for other reactions. Co-CIT-6 oligomerizes propylene, albeit less effectively than Ni-CIT-6. The other M-CIT-6 samples, while not able to oligomerize light olefins, may be useful for other reactions, such as deNOx.

Molecular sieves are synthesized, characterized, and used to catalyze the methanol-to-olefins (MTO) reaction. The Al concentration in SSZ-13 samples is varied to investigate the effect of Al number on MTO reactivity when compared to a SAPO-34 sample with only isolated Si Brønsted acid sites. These SSZ-13 samples display reduced transient selectivity behavior and extended reaction lifetimes as Si/Al increases; attributable to fewer paired Al sites. MTO reactivity for the higher Si/Al SSZ-13s resembles the SAPO-34 sample, suggesting that both catalysts owe their stable reaction behavior to isolated Brønsted acid sites.

Zeolites CHA and RHO are prepared without the use of organic structure-directing agents (OSDAs), dealuminated by steam treatments (500°C-800°C), and evaluated as catalysts for the MTO reaction. The effects of temperature and steam partial pressure during steaming are investigated. X-ray diffraction (XRD) and Ar physisorption show that steaming causes partial structural collapse of the zeolite, with degradation increasing with steaming temperature. 27Al MAS NMR spectra of steamed materials reveal the presence of tetrahedral, pentacoordinate, and hexacoordinate aluminum.

Proton forms of as-synthesized CHA (Si/Al=2.4) and RHO (Si/Al=2.8) rapidly deactivate under MTO testing conditions (400°C, atmospheric pressure). CHA samples steamed at 600°C performed best among samples tested, showing increased olefin selectivities and catalyst lifetime. Acid washing these steamed samples further improved activity. Reaction results for RHO were similar to CHA, with the RHO sample steamed at 800°C producing the highest light olefin selectivities. Catalyst lifetime and C2-C3 olefin selectivities increase with increasing reaction temperature for both CHA-type and RHO-type steamed samples.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Despite its ornamental value, some Melocactus species (Cactaceae) are threatened by several factors and only sexual propagation is possible. Thus, artificial seed banks are an appropriate method for their ex situ conservation. Suitable methods to germinate and to monitor viability are necessary for the seeds of these species. This work explored the use of tetrazolium test for monitoring seed viability of two Melocactus species. There was a correlation between the percentage of stained embryos, considering different cover area or tone stain, and the germination percentage. Unviable embryos did not stain. The embryos curved shape can explain the partial stain on the most of cases.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Stress serves as an adaptive mechanism and helps organisms to cope with life-threatening situations. However, individual vulnerability to stress and dysregulation of this system may precipitate stress-related disorders such as depression. The neurobiological circuitry in charge of dealing with stressors has been widely studied in animal models. Recently our group has demonstrated a role for lysophosphatidic acid (LPA) through the LPA1 receptor in vulnerability to stress, in particular the lack of this receptor relates to robust decrease of adult hippocampal neurogenesis and induction of anxious and depressive states. Nevertheless, the specific abnormalities in the limbic circuit in reaction to stress remains unclear. The aim of this study is to examine the differences in the brain activation pattern in the presence or absence of LPA1 receptor after acute stress. For this purpose, we have studied the response of maLPA1-null male mice and normal wild type mice to an intense stressor: Tail Suspension Test. Activation induced by behaviour of brain regions involved in mood regulation was analysed by stereological quantification of c-Fos immunoreactive positive cells. We also conducted multidimensional scaling analysis in order to unravel coativation between structures. Our results revealed hyperactivity of stress-related structures such as amygdala and paraventricular nucleus of the hypothalamus in the knockout model and different patterns of coactivation in both genotypes using a multidimensional map. This data provides further evidence to the engagement of the LPA1 receptors in stress regulation and sheds light on different neural pathways under normal and vulnerability conditions that can lead to mood disorders.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Background: Hereditary Tyrosinemia type I (HTI) is a metabolic disease caused by deficiency of fumarylacetoacetate hydrolase enzyme. Objectives: This study reports beside its clinical and biochemical presentation, the outcome of NTBC [2- (2-nitro-4-trifloro-methylbenzoyl)-1, 3-cyclohexanedion] treatment of the disease and evaluates its biochemical markers in 16 pediatric Libyan patients. Patients and Methods: The diagnosis was based on presence of high tyrosine levels in blood and succinylacetone in urine. Results: The consanguinity rate was 81.2%, the median age at onset, at diagnosis and at starting treatment were 4.5, 8, and 9.5 months respectively. At presentation hepatomegaly, jaundice, rickets and high gamma glutamyl transferase (GGT) were observed in 87.5% of patients. All patients had extremely high alpha fetoprotein (AFP) and high alkaline phosphatase (ALP) levels. Fifteen patients were treated with NTBC, normalization of PT (Prothrombine time) was achieved in average in 14 days. The other biochemical parameters of liver function (transaminases, GGT, ALP, bilirubin and albumin) took longer to improve and several months to be normalized. Survival rate with NTBC was 86.6%. Patients who started treatment in a median of 3 months post onset observed a fast drop of AFP in 90.6% of patients (P = 0.003). Abnormal liver function and rickets were the common presentations, GGT was an early cholestatic sensitive test. ALP was constantly high even in asymptomatic patients. Conclusions: In HT1 a faster dropping of AFP is a marker of good prognosis.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Mycobacterium avium subsp. paratuberculosis is an important animal pathogen widely disseminated in the environment that has also been associated with Crohn's disease in humans. Three M. avium subsp. paratuberculosis genomotypes are recognized, but genomic differences have not been fully described. To further investigate these potential differences, a 60-mer oligonucleotide microarray (designated the MAPAC array), based on the combined genomes of M. avium subsp. paratuberculosis (strain K-10) and Mycobacterium avium subsp. hominissuis (strain 104), was designed and validated. By use of a test panel of defined M. avium subsp. paratuberculosis strains, the MAPAC array was able to identify a set of large sequence polymorphisms (LSPs) diagnostic for each of the three major M. avium subsp. paratuberculosis types. M. avium subsp. paratuberculosis type II strains contained a smaller genomic complement than M. avium subsp. paratuberculosis type I and M. avium subsp. paratuberculosis type III genomotypes, which included a set of genomic regions also found in M. avium subsp. hominissuis 104. Specific PCRs for genes within LSPs that differentiated M. avium subsp. paratuberculosis types were devised and shown to accurately screen a panel (n = 78) of M. avium subsp. paratuberculosis strains. Analysis of insertion/deletion region INDEL12 showed deletion events causing a reduction in the complement of mycobacterial cell entry genes in M. avium subsp. paratuberculosis type II strains and significantly altering the coding of a major immunologic protein (MPT64) associated with persistence and granuloma formation. Analysis of MAPAC data also identified signal variations in several genomic regions, termed variable genomic islands (vGIs), suggestive of transient duplication/deletion events. vGIs contained significantly low GC% and were immediately flanked by insertion sequences, integrases, or short inverted repeat sequences. Quantitative PCR demonstrated that variation in vGI signals could be associated with colony growth rate and morphology.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Because of global warming the energy production development has progressed towards more renewable energy sources. Biomass has great potential in this matter and pellet is already a big market that has increased seven times the past decade. A periodically strained woodchip resource market and statements of short supply in the future has got actors exploring opportunities with other commodities. Grasses such as Canary grass has shown great potential in this matter and in this study a wetland grass is tested as an additive, 0,5, 1,0, 1,5, and 1,9%, with spruce woodchips. The test production series was performed at a production unit located at the department of environmental and energy system at Karlstad University, Karlstad. Quality was controlled accordingly to the European standard and parameters such as energy consumption, moisture content, mechanical durability and bulk density was tested. For comparison, a sample with only spruce wood chips was produced, and a sample containing 1% of a commonly used additive, potato starch. The results showed that a decrease in energy consumption with 14% when 2% wetland grass was added, part of the decline may be due to the increased production flow compared with the reference sample. The positive effects on decrease in energy consumption, that 1% potato starch results in, is equal to reults from 1% wetlandgrass. This indicates lubricating properties in wetlandgrass. This is attributed to that herbaceous plants have a high content of extracts such as waxes and that they cause less friction in the press. Tests also showed that pellet with wetland grass did not qualify the European standard in terms of mechanical durability. Extracts can form a weak boundary layer in the pellet and cause this. A possible trend shows a better mechanical durability with more grass in pellets. The presence of different size of particles can be a reason. Moisture content qualifies according to the European standard but is below optimum 8%. This despite to relatively high moisture content in the mixer. Higher moisture content in the press would certainly result in a generally higher quality. Suggestions for future studies are to produce pellets with greater distribution on the wetland grass added, to easier interpret a connection. Also examine the extracts behavior with different moisture content. For a sustainable development accordingly renewable energy it is important to ensure the future commodity market for pellets. Further studies should be performed to help the development of alternative raw materials in conjunction with pellet production.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Syftet med studien var att jämföra grad av coping samt grad av livstillfredsställelse mellan religiösa personer och de som anser sig vara icke troende. För att testa skillnaderna mellan religiösa och ateister gjordes stickprov med data från 30 religiösa och 103 ateister. Mätinstrumentet REI skapades för att mäta graden av tro eller icke tro i avseende att jämföra resultatet mot den trosuppfattning som deltagarna själva hade angivit. Ett Mann–Whitney U test visade att det inte fanns en signifikant skillnad mellan deltagarnas självskattning av tro och resultatet från REI. Resultat från oberoende t-test avseende livstillfredsställelse visar att religiösa och ateister inte signifikant skilde sig åt. Signfikanta skillnader återfanns i oberoende t-test avseende emotionsbaserad, problemfokuserad och dysfunktionell coping. De religiösa och ateistiska grupperna skiljde sig mest i emotionsbaserad coping som hade högst effektstyrka enligt Cohens d (d = 1,39) i jämförelse med effektstyrkan för problemfokuserad och dysfunktionell coping.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Projeto de Graduação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciada em Fisioterapia

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Abstract Purpose – To study the possibility of using a NIR hardware solution to photograph individuals in a private vehicle as well as an analysis of its images. Method – A study of existing theories around the NIR-method’s performance in selected conditions and individual tests were performed to examine if the literature statements were valid for this study. Two empirical tests have been carried out, the first was carried out at Kapsch test track and the other outside the test track in a single stationary test. An interview which formed the basis for the assessment on the quality of empirical data with a focus on computer-based detection of the number of individuals in the vehicle. Findings – The results have demonstrated the potential of the NIR method’s performance in a fully automated detection system for the number of individuals inside the vehicle. Empirical data indicates that the method can depict individuals inside vehicles of sufficiently high quality, but it is greatly affected by reflections, weather and light conditions. Implications – Result supports the assumption that the NIR method using an external light source can be used to image the interior through a varying number of weather and lightning conditions. The study originated until the results suggested that a NIR-based hardware setup can create images with high enough quality for the human eye to be able to detect the number of individuals inside the vehicle.If the overall performance into account, it suggests that the main problem with the use of the hardware set is to maintain the quality of the whole sample and that the crucial variables for the method’s performance is the influence of light and reflection conditions. Limitations – The major limitations have been that we limited ourselves to a subjective analysis of the selection and assessment on the image features for computer-based detection of the number of individuals in the vehicle. We were limited to two tests, one in tough conditions where only the driver was in the vehicle and the second stationary test, where the focus was on the number of people in vehicles and light sources impact on the result.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Braille is a communication tool in decline, in America by 80% since 1950, and in the UK to the extent that only 1% of blind people are now thought to read Braille.1, 2 There are a variety of causal factors, including the phasing out of Braille instruction due to the educational mainstreaming of blind children and the resistance to learning Braille by those who lose sight later in life.3Braille is a writing system of raised dots that allows blind people to read and write tactilely. Each Braille character comprises a cell of six potentially raised dots, two dots across and three dots down. It is designed only to communicate the message and does not convey the tonality provided by visual fonts.However, in his book Design Meets Disability, Graham Pullin, observes that: “Braille is interesting and beautiful, as abstract visual and tactile decoration, intriguing and indecipherable to the nonreader ” and continues; “…braille could be decorative for sighted people.”4I assert that the increasing abandonment of Braille frees it from its restrictive constraints, opening it to exploration and experimentation, and that this may result in Braille becoming dynamic expression for the sighted, as well as the partially sighted and blind.Printmaking is well suited for this exploration. Printmaking processes and techniques can result in prints aesthetically compelling to both senses of sight and touch. Established approaches, such as flocking, varnishes, puff-ink, embossing and die cut, combined with experiments in new techniques in laser cutting and 3D printing, create visually and texturally vibrant prints.In this paper I will detail my systematic investigation of sensually expressive printmaking concentrating on the issues surrounding Braille as a printmaking design element paying particular attention to the approaches and techniques used not only in producing its visual style but to those techniques used to keep it integrally tactile.