934 resultados para Resíduos de cinza


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present work is the analysis of the practices and techniques currently used in the final allocation given to organic household solid waste in the city of Rio Claro - SP. As the major part of Rio Claro’s household solid waste is formed by the organic fraction, as well as in the rest of the country, this research proposes a study on what is done with that portion of the waste, its treatment and where finally destined, based on the National Solid Waste Politic, recently approved in 2010. With the use of this organic part, for example: as animal feed supplement or compost embodiment for the purpose of producing organic fertilizer, enables the decrease of the percentage of the total destined to dumps and landfills. This total percentage has already been reduced after the popularization of the beneficial recycling programs in Brazil, which are still growing. As cities and the purchasing power of its individuals grow, there is also a consequent growth of waste production by society. The household whether domestic solid waste are lower than Industrial Solid ( RSI ) waste for the production in million tons ( Mton ) quantities , however, those residues are more visible on a daily basis - in cities and periphery as well, due to the inadequate management, - and also offer , as well as industrial and agricultural wastes , several types of harmful effects to the population when managed incorrectly. Therefore, the research aims to assist in the study of Solid Waste Management (MSW) for efficient Urban and Environmental Planning in a midsize city. Thus, this project aims to analyze in the city of Rio Claro, how the allocation of these materials is done and whether these practices denote effective improvement regarding the proper management of waste, in the same way that the recycling chain would allow this effect

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A consequence of population growth is the increased generation of solid waste, which requires environmentally and economically viable suitable disposal sites. The scarcity of such sites makes necessary to adopt non-generation measures, reduction, reuse , recycling and treatment of solid waste before final disposal of waste. This paper presents the quantification and qualification of organic waste generated in each sector of the University Restaurant (UR) , by proposing indicators of waste generation per meal (index of waste) . Then, from the characterization of the waste management practices adopted internally, evaluates the potential deployment of the composting process for organic waste, with signaling for opportunities to improve waste management. The diagnosis of waste generation was made based on data collected during the period of 10 days. The waste were classified into 3 groups (organic, recyclable and waste) in each sector of the restaurant ( pre preparation , kitchen and tray return) . The results reveal that 33 % of the waste generated in the UR currently has the potential to be composted in a suitable place on campus. Every meal served generat approximately 124g of waste, of which 35g are organic waste of the pre preparation sector, 49g are remnants of food in the tray’s return and 40g are other kinds of waste, including recyclable and non recyclable. You can still get a higher percentage of compostable if the trays pre-wash is not performed with detergent and water. To minimize the generation of waste trays can be replaced by plates and skimmers and ladles can be replaced by smaller ones. The food exposed in the counter but not consumed, can be distributed to students after the restaurant is closed so this material would not be disposed in the garbage

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work is proposed to evaluate the potential risk of an inert landfill in the city of Rio Claro (SP), and also suggest a source for the contamination. The study was proposed because it is known that there were legal technicalities greetings to guarantee the quality of groundwater. Given the requirements of the Environmental Company of São Paulo (CETESB) were installed monitoring wells in the area; sampled to groundwater and its contamination was found. In addition, we analyzed the main characteristics of the area, the arrangement and characteristics of the waste, the local geology and the hydrogeological system, so that I could find the source of contaminants, and predict the direction of dispersion even in groundwater. At the end of the work presents conclusions, recommendations and proposals for mitigating action

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The focus of this research study were gas exchange between soil and atmosphere of nitrous oxide (N2O) between different fertilization treatments Corn The research, conducted in the experimental field Dedelow - Brandenburg / Germany, analyzed three different fertilization treatments, aiming to quantify GHE emissions, to identify the influence of the residue of biogas in the release of these gases process in agricultural soils in search for a solution fertilization less harmful to the environment and the greenhouse effect , based on the comparison of three treatments: organic fertilization, mineral fertilization and no fertilization. It was found through the analysis of the measurements that the first was the one which issued N2O, showing that even though coming from the residue of biogas , when returned to the soil, it becomes harmful to the environment and global warming . The cultivation of energy crops can lower or raise the emissions of greenhouse gases, so it is necessary for further research on this question not only in Germany , where such research is in continuity, but also in Brazil, a pioneer in the introduction to his energy matrix of a biofuel produced from cane sugar

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This project aimed to analyze the feasibility of the methane yield associated to the anaerobic digestion of brewery residues, checking whether the energetic balance of the system is favorable. The methane yield efficiency was calculated for the parameters of two papers that treated solids with a particle-size <1mm. Theses solids are not degraded in conventional treatment systems. Calculations were based in the reactions of anaerobic degradation of the macromolecules that compose brewery residues, considering the theoretical production and the effective production of methane. The results were 50.44% and 52.86%. Regarding to the energy balance of the anaerobic treatment, we noted the high influence of the selection and operating regime of electrical equipment over the potential energy. The best situation, in which the energetic self-sufficiency was reached, was observed when using the mixer under an intermittent regime (1min/h), without employing the heating recirculator, for the maximum organic loading of 4.0 gVS/L.day (days 248-258). In this case, the system would generate an amount of energy equal to 0.0356 kWh/day, able to overcome the energy required by the equipment in about 6.5 times. Moreover, we also noted the interference of the application of different solid loadings in the reactors, once the application of the higher organic load generated 5 times more energy than the application of the smaller one

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The present study aimed to analyze how develops the reverse logistics process applied in electrical and electronic products. Such analysis was obtained through literature search and with the completion of a case study, which was developed at the company's Oxil Reverse Manufacture, showing the advantages obtained as well as the difficulties faced in the implementation of the reverse logistics process. The development of this research shows its importance in so far as the residues generated by electronic components, which are one of the most harmful to the environment and harmful to human health, highly possessing heavy metals and non-biodegradable materials in their composition. In this way, the components collected from this activity, should be properly recycled, reused and finally housed in suitable location, these steps that are part of the reverse logistics process

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this assignment, will be assessed the conditions of operation for the final disposal of household solid waste landfill in the city of Cachoeira Paulista-SP. The theme chosen for research is of great social importance therefore is directly related to the well-being of the people, sustainable development, environmental protection and public health. Everyone should be aware of the problems related to improper final disposal of solid waste of any kind. The objectives of the study were: analyse the conditions of operation of the landfill; verify the treatment technology of percolating liquids (slurry) generated in the landfill; examine whether the landfill obey the rules; which cities in the region depend on the disposal system, verify that there are flaws in the final destination of solid waste in the municipality and in the cities of the region. The research is primarily a bibliographic review, obtained by querying the database and virtual libraries. Technical visits were also held at the study site, to check spot the methodology employed in the operation of landfill This work concluded that for the period under study, the landfill was as a landfill site, therefore, in accordance with the rules of operation

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The need to use waste from wood processing industry grows due to environmental demands imposed by laws, so like the need to introduce more competitive products in the market (it means better quality and acceptable cost) who must submit by the rational use of raw material, usually turning waste to sub products, what adds higher value for that. To this research, specific case from Ribon Company, located on Camaçari, Bahia-Brazil, has been studied. It is a treated wood producer. Bulk of monthly wood logs there is 70 m3. Its yield is 71,43%, where bulk of generated waste is monthly 20m3. As an exploitation way from generated waste, it has been suggested some options like: erosion protection to specific areas, a wildlife shelter as an henhouse etc, recreational articles, coal, linings, treadmills. However this research will give focus to the furniture design made of waste. As a conclusion, there is very much need to assign new utilizations to that sub used materials, since there is significant amount to increase company’s productive yield

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The current problematic of the construction and demolition (C&D) waste faced for the Brazilian cities, is one of the main degradation factors of the environment, over all about the promise of the urban ambient quality. This scenery must mainly to the unsustainable management adopted by the great majority of the Brazilian cities. Therefore, this work aims at to offer subsidies for medium cities, having as study object the city of Rio Claro-SP, (Brazil), in the elaboration of plans and integrated programs of sustainable management of the construction and demolition waste, in accordance with CONAMA Resolution nº 307/2002, that’s set up a sustainable management system of C&D waste. In this direction, the diagnosis of the management was elaborated for the city of Rio Claro, (generation, collects, transport and disposal) and the public administration of the construction and demolition waste, as well as of the study of the related aspects with C&D waste recycling plant. Later, was suggested a plan of improvements for the public manager of C&D waste: areas of temporary disposal to facility the appropriating destination, appropriated areas of final disposal, incentives to the recycling of C&D waste, new legislations, education and orientation programs and adequacy the agents of C&D waste management (generating, transporting, addressee and public manager), directing for an environmental, economic and social sustainability.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Due to the large economic development associated with the growing consumerist lifestyle of our capitalist society, the problem of uncontrolled solid waste generation worsens, which one is considered to be one of the main responsible factors for environmental degradation. As a case study and in order to solve the problem of large generation of municipal solid waste, this work aims to study the “plano diretor” of Rio Claro city, São Paulo. The “plano diretor” is a municipal law that provides guidelines for the administration of the city, which include guidelines for the management of solid waste generated in the city. The guidelines required in order to write the “plano diretor” are provided by the national law “estatuto da cidade”, providing information for the planning and development of the cities, as well as the management of the urban environment. However, only the “estatuto da cidade” does not provide enough instructions for creating management plans in order to solve the many problems from the urban environment. Thus, studies have been done about urban and environmental management, to understand how municipal management plans should be structured. As a form of seeking information that can complement the “plano diretor” to the creation of policies for managing solid waste of the city, the “Política Nacional de Resíduos Sólidos”(PNRS) emerges in 2010 as a document which provides principles, objectives and guidelines to create plans for Solid Waste Management at the national, state, regional and municipal levels. Therefore, it was possible to make a joint analysis of the “plano diretor” of Rio Claro with the PNRS to identify what is already done within the municipality about the solid waste management, and identify which aspects are most significant in the municipal solid waste management that the national policy provides. Yet studies have been done on the current municipal solid waste management...

Relevância:

20.00% 20.00%

Publicador:

Resumo:

With the growing world energy demand mainly from developing countries like Brazil, Russia, India and China, the search for efficient sources of energy becomes a challenge for the coming years. Among the most widely used alternative sources, biomass is the one that grows in a more pronounced way. This study will assess the real possibility of having it as a heat source in an Organic Rankine Cycle, which employ heat transfer fluids as working fluids instead of water. From a regional data collection in agricultural production and their potential rice production and the resulting husk was defined as more appropriate. The availability of husks together with an amount of eucalyptus wood, provided by a company in the region on a monthly basis, were analyzed, and the low participation of the wood was discarded by the thermal contribution of little significance. Based on this, it was established the calorific value of fuel for thermodynamic calculations and the cycle to be used. It was then carried out the choice of working fluid from the literature and their availability in the library of software used for the simulations, the Engineering Equation Solver - ESS. The fluid most appropriate for the burning of biomass, Octamethyltrisiloxane (OMTS), was not included in the software and so the R227ea and R134a were selected. After the initial parameters modeling definition, as condensing temperature, efficiency and live steam conditions, the simulations were performed, and only the R227ea remained within the feasible thermodynamic and technological ranges. With this fluid the turbine power output was 265.7 [kW] for a scenario of 24 hours/day burning, 800.3 [kW] to biomass burning for 8 hours/day and 2134 [kW] for burning only 3 hours/day. The thermal efficiency of the cycle remained in the range of 6%, and for plants operating with the most... (Complete Abstract click eletronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

With the constant increase in the municipal solid waste (MSW) generation, mainly due to the high consumption patterns, it becomes difficult to manage correctly the solid waste and thus minimize their impact on the environment. One of the most problems of the large amount of waste generated is the liquid originated from physical, chemical and biological decomposition process of organic wastes, with dark color and bad smell, called leachate: it can reach the soil, polluting the groundwater and the surface water. Therefore, this study aimed to investigate the process of coagulation/flocculation/sedimentation applied in the treatment of the leachate generated in the not controlled landfill of Presidente Prudente, Sao Paulo... (Complete abstract click electronic access below)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this paper we investigate the temperature variation of the mass of waste along the depth in a household waste landfill of Rio Claro - SP, São Paulo, having a climate characterized as Tropical Altitude. In this research, there were two holes in two distinct points of the landfill, with different depths and characteristics in order to fix several thermal sensors - RTDs - to record the temperature at predetermined depths. Overall, the results show the influence of temperature at depths of up to 3.0 meters (from the surface) and that it varies in a manner to stabilize at depths above 5.0 meters. The highest temperature obtained was approximately 37.5 ° C for a time of waste disposal of 7 to 10 years. The results showed the presence of organic matter (substrate) which resulted in elevated temperature resulting from biological activity