General electromagnetic simulation tool to predict the microwave nonlinear response of planar, arbitrarily-shaped HTS structures

This work describes a simulation tool being developed at UPC to predict the microwave nonlinear behavior of planar superconducting structures with very few restrictions on the geometry of the planar layout. The software is intended to be applicable to most structures used in planar HTS circuits, including line, patch, and quasi-lumped microstrip resonators. The tool combines Method of Moments (MoM) algorithms for general electromagnetic simulation with Harmonic Balance algorithms to take into account the nonlinearities in the HTS material. The Method of Moments code is based on discretization of the Electric Field Integral Equation in Rao, Wilton and Glisson Basis Functions. The multilayer dyadic Green's function is used with Sommerfeld integral formulation. The Harmonic Balance algorithm has been adapted to this application where the nonlinearity is distributed and where compatibility with the MoM algorithm is required. Tests of the algorithm in TM010 disk resonators agree with closed-form equations for both the fundamental and third-order intermodulation currents. Simulations of hairpin resonators show good qualitative agreement with previously published results, but it is found that a finer meshing would be necessary to get correct quantitative results. Possible improvements are suggested.

Manipulació geomètrica dels blocs d'AutoCAD

Aquest text és un recull de procediments per inserir els blocs d'AutoCAD de forma més eficient, en la resolució de problemes prèviament tipificats: la PRIMERA PART descriu protocols d'actuació que l'usuari haurà d'aplicar manualment, mentre que la SEGONA PART ofereix rutines programades en AutoLISP i VisualLISP que l'eximiran d'aquesta obligació.Si ho deixéssim aquí, però, podria semblar que els mateixos mètodes manuals presentats en primer lloc són després els que AutoLISP automatitza; per això convé aclarir que la problemàtica de la PRIMERA PART, tot i que pròxima a la de la SEGONA, és diferent i reprodueix el contingut d'una monografia (BLOCS I GEOMETRIA: 5 EXERCICIS COMENTATS) que forma part del material de suport a l'assignatura ELEMENTS DE CAD, impartida per l'autor en l'ETS d'Enginyeria de Telecomunicació de Barcelona i que té per objecte cobrir el buit bibliogràfic que es detectava en el vessant geomètric de la inserció de blocs, a diferència del que s'ocupa de l'estructura de dades més adient en cada context (incrustació de dibuixos amb INSERT versus vinculació mitjançant REFX), més profusament tractat, proposant una sistematització tipològica dels casos on l'escala és funció lineal d'una distància.La SEGONA PART va més enllà i amplia el repertori d'AutoCAD amb les ordres GINSERT, RATREDIT, INSERTOK, INS2D, INS3D, BLOQUEOK, DESCOMPOK, DEF-TRANSF, APL-TRANSF-V i APL-TRANSF-N, de les quals INS2D i INS3D (INSERTOK és una versió simplificada de INS2D, per a blocs sense atributs) són l'aportació més innovadora i que més lluny porta les potencialitats de la inserció de blocs: resumint-ho en una frase, es tracta d’aconseguir que la inserció d’un bloc (que pot ser l’original, un bloc constituït per una inserció de l’original o un de constituït per la inserció del precedent) s’encabeixi en un marc prèviament establert, a semblança de les ordres ESCALA o GIRA, que mitjançant l'opció Referencia apliquen als objectes seleccionats la transformació d'escalat o de rotació necessària per tal que un element de referència assoleixi una determinada grandària o posició. Tot i que, per identificar amb encert el nucli del problema, serà inevitable introduir una reflexió: quan s’ha tingut la precaució de referir un bloc 2D a un quadrat unitari ortogonal, inserir-lo de manera que s’adapti a qualsevol marc rectangular establert en el dibuix és immediat, però ja no ho és tant concatenar insercions de manera que, a més d’una combinació simple de escalat, gir i translació, l’operació dugui implícita una transformació de cisallament. Perquè és clar que si inserim el bloc girat i convertim la inserció en un bloc que al seu torn tornem a inserir, ara però amb escalat no uniforme, el transformat del quadrat de referència primitiu serà un paral·lelogram, però el problema és: dibuixat un marc romboïdal concret, ¿quin gir caldrà donar a la primera inserció, i quin gir i factors d’escala caldrà aplicar a la segona perquè el quadrat de referència s’adapti al marc? El problema es complica si, a més, volem aprofitar el resultat de la primera inserció per a d’altres paral·lelograms, organitzant un sistema no redundant de insercions intermèdies. Doncs bé: INS2D i INS3D donen satisfacció a aquestes qüestions (la segona ja no contempla l'encaix en un paral·lelogram, sinó en un paral·lelepípede) i són aplicables a blocs proveïts d’atributs, no només de tipus convencional (els continguts en el pla de base del bloc, únics de funcionament garantit amb l’ordre INSERT), sinó també dels situats i orientats lliurement.

Sobre un modelo constructivo de la arquitectura ibérica en territorio Ausetano

En este trabajo presentamos el estudio arquitectónico de un tipo de construcción identifi cado en el territorio ibérico ausetano. A partir del análisis constructivo de tres obras defensivas militares identifi cadas como murallas de compartimentos (Turó del Montgròs, Casol de Puigcastellet y l’Esquerda), planteamos una propuesta de restitución del diseño arquitectónico de estas construcciones basadas en el uso de formas geométricas simples y en la adición de módulos cuadrangulares.

The influence ofvariable amplitude loading on the fatigue strength of rhs corners

Rectangular hollow section (RHS) members are components widely used in engineering applications because of their good-looking, good properties in engineering areas and inexpensive cost comparing to members with other sections. The increasing use of RHS in load bearing structures makes it necessary to analyze the fatigue behavior of the RHS members. In this thesis, concentration will be given to the fatigue behavior of the RHS members under variable amplitude pure torsional loading. For the RHS members, failure will normally occur in the corner region if the welded regions are under full penetration. This is because of the complicated stress components' distributions at the RHScorners, where all of three fracture mechanics modes will happen. Mode I is mainly caused by the residual stresses that caused by the manufacturing process. Modes II and III are caused by the applied torsional loading. Stress based Findleymodel is also used to analyze the stress components. Constant amplitude fatigue tests have been done as well as variable amplitude fatigue tests. The specimens under variable amplitude loading gave longer fatigue lives than those under constant amplitude loading. Results from tests show an S-N curvewith slope around 5.

Ohutlevy-yrityksen mekaanisen valmistuksen tehostaminen

Diplomityön tavoitteena on tehostaa ohutlevytuotteita valmistavan yrityksen toimintaa ja parantaa tuotannon ohjattavuutta. Tuotannon tehostamisessa keskitytään minimoimaan asetusajat, pienentämään eräkokoja ja investoimaan valmistusta helpottaviin työkoneisiin tai -laitteisiin. Tuotannon ohjattavuutta kehitetään helpottamalla visuaalista seurantaa, layout-muutoksilla ja FiFo-ohjauksen käyttöönotolla. Kaikilla kehitystoimenpiteillä pyritään lyhentämään tuotannon läpimenoaikaa ja vähentämään keskeneräisen tuotannon määrää. Tavoitteena on luoda pohja Lean-valmistukselle. Kehitystoimenpiteet keskitetään useimmiten pullonkauloiksi muodostuville osastoille. Kapeikkojen avaamisessa hyödynnetään CIM-projektin mukaisesti tehtäviä investointeja. Uudella robottisärmäysyksiköllä mahdollistetaan litistäminen ja särmääminen yhdellä asetuksella. Kokoonpano-osaston sijaintia muutettiin ja osaston layoutista tehtiin linjamainen. Tuotannonohjauksen kehittämiseksi luotiin yksinkertainen kolmen askeleen kehitysmalli.

Flow phenomena, heat and mass transfer in microchannel reactors

The studies of flow phenomena, heat and mass transfer in microchannel reactors are beneficial to estimate and evaluate the ability of microchannel reactors to be operated for a given process reaction such as Fischer-Tropsch synthesis. The flow phenomena, for example, the flow regimes and flow patterns in microchannel reactors for both single phase and multiphase flow are affected by the configuration of the flow channel. The reviews of the previous works about the analysis of related parameters that affect the flow phenomena are shown in this report. In order to predict the phenomena of Fischer-Tropsch synthesis in microchannel reactors, the 3-dimensional computational fluid dynamic simulation with commercial software package FLUENT was done to study the flow phenomena and heat transfer for gas phase Fischer-Tropsch products flow in rectangular microchannel with hydraulic diameter 500 ¿m and length 15 cm. Numerical solution with slip boundary condition was used in the simulation and the flowphenomena and heat transfer were determined.

Typpeä sisältävien jätevesien käsittely 2-n-PRO menetelmällä

Työssä tutkittiin kaksivaiheisen typenpoistoprosessin (2-N-PRO) soveltuvuutta Joutsenon Kukkuroinmäen aluejätekeskuksen kompostointilaitoksen jätevesille pilot-kokein 12.1.- 5.4.2006. Kompostilaitoksella on jätevesien esikäsittelytarve korkeista ammoniumtyppipitoisuuksista johtuen. Pilot-laitteisto koostuu sekoitussäiliöstä, strippaustornista ja katalyyttipolttimesta. Käsiteltävän jäteveden pH nostetaan korkealle tasolle, jolloin ammoniumtyppi muuttuu ammoniakiksi. Vesi johdetaan strippaustorniin, jossa se sadetetaan tornin pohjalle. Ammoniakki erottuu sadetuksessa ilmaan, joka imetään katalyyttipolttimelle. Katalyyttinen poltin käsittelee ammoniakkia typpikaasuksi. Pilot-kokeet suoritettiin jatkuvatoimisesti. Laitteisto pystyy erottamaan jätevedestä ammoniumtyppeä ammoniakiksi ja käsittelemään ammoniakin pääosin typpikaasuksi. Lisäksi suoritettiin panoskoe, jonka tulokset tukevat jatkuvatoimisesta käytöstä saatuja tuloksia.

The Munc13 proteins differentially regulate readily releasable pool dynamics and calcium-dependent recovery at a central synapse.

The Munc13 gene family encodes molecules located at the synaptic active zone that regulate the reliability of synapses to encode information over a wide range of frequencies in response to action potentials. In the CNS, proteins of the Munc13 family are critical in regulating neurotransmitter release and synaptic plasticity. Although Munc13-1 is essential for synaptic transmission, it is paradoxical that Munc13-2 and Munc13-3 are functionally dispensable at some synapses, although their loss in other synapses leads to increases in frequency-dependent facilitation. We addressed this issue at the calyx of Held synapse, a giant glutamatergic synapse that we found to express all these Munc13 isoforms. We studied their roles in the regulation of synaptic transmission and their impact on the reliability of information transfer. Through detailed electrophysiological analyses of Munc13-2, Munc13-3, and Munc13-2-3 knock-out and wild-type mice, we report that the combined loss of Munc13-2 and Munc13-3 led to an increase in the rate of calcium-dependent recovery and a change in kinetics of release of the readily releasable pool. Furthermore, viral-mediated overexpression of a dominant-negative form of Munc13-1 at the calyx demonstrated that these effects are Munc13-1 dependent. Quantitative immunohistochemistry using Munc13-fluorescent protein knock-in mice revealed that Munc13-1 is the most highly expressed Munc13 isoform at the calyx and the only one highly colocalized with Bassoon at the active zone. Based on these data, we conclude that Munc13-2 and Munc13-3 isoforms limit the ability of Munc13-1 to regulate calcium-dependent replenishment of readily releasable pool and slow pool to fast pool conversion in central synapses.

β1- and β3- voltage-gated sodium channel subunits modulate cell surface expression and glycosylation of Nav1.7 in HEK293 cells.

Voltage-gated sodium channels (Navs) are glycoproteins composed of a pore-forming α-subunit and associated β-subunits that regulate Nav α-subunit plasma membrane density and biophysical properties. Glycosylation of the Nav α-subunit also directly affects Navs gating. β-subunits and glycosylation thus comodulate Nav α-subunit gating. We hypothesized that β-subunits could directly influence α-subunit glycosylation. Whole-cell patch clamp of HEK293 cells revealed that both β1- and β3-subunits coexpression shifted V ½ of steady-state activation and inactivation and increased Nav1.7-mediated I Na density. Biotinylation of cell surface proteins, combined with the use of deglycosydases, confirmed that Nav1.7 α-subunits exist in multiple glycosylated states. The α-subunit intracellular fraction was found in a core-glycosylated state, migrating at ~250 kDa. At the plasma membrane, in addition to the core-glycosylated form, a fully glycosylated form of Nav1.7 (~280 kDa) was observed. This higher band shifted to an intermediate band (~260 kDa) when β1-subunits were coexpressed, suggesting that the β1-subunit promotes an alternative glycosylated form of Nav1.7. Furthermore, the β1-subunit increased the expression of this alternative glycosylated form and the β3-subunit increased the expression of the core-glycosylated form of Nav1.7. This study describes a novel role for β1- and β3-subunits in the modulation of Nav1.7 α-subunit glycosylation and cell surface expression.

Permanent magnet synchronous motor for industrial inverter applications - analysis and design

During the latest few years the need for new motor types has grown, since both high efficiency and an accurate dynamic performance are demanded in industrial applications. For this reason, new effective control systems such as direct torque control (DTC) have been developed. Permanent magnet synchronous motors (PMSM) are well suitable for new adjustable speed AC inverter drives, because their efficiency and power factor are not depending on the pole pair number and speed to the same extent as it is the case in induction motors. Therefore, an induction motor (IM) with a mechanical gearbox can often be replaced with a direct PM motor drive. Space as well as costs will be saved, because the efficiency increases and the cost of maintenance decreases as well. This thesis deals with design criterion, analytical calculation and analysis of the permanent magnet synchronous motor for both sinusoidal air-gap flux density and rectangular air-gapflux density. It is examined how the air-gap flux, flux densities, inductances and torque can be estimated analytically for salient pole and non-salient pole motors. It has been sought by means of analytical calculations for the ultimate construction for machines rotating at relative low 300 rpm to 600 rpm speeds, which are suitable speeds e.g. in Pulp&Paper industry. The calculations are verified by using Finite Element calculations and by measuring of prototype motor. The prototype motor is a 45 kW, 600 rpm PMSM with buried V-magnets, which is a very appropriate construction for high torque motors with a high performance. With the purposebuilt prototype machine it is possible not only to verify the analytical calculations but also to show whether the 600 rpm PMSM can replace the 1500 rpm IM with a gear. It can also be tested if the outer dimensions of the PMSM may be the same as for the IM and if the PMSM in this case can produce a 2.5 fold torque, in consequence of which it may be possible to achieve the same power. The thesis also considers the question how to design a permanent magnet synchronous motor for relatively low speed applications that require a high motor torqueand efficiency as well as bearable costs of permanent magnet materials. It is shown how a selection of different parameters affects the motor properties. Key words: Permanent magnet synchronous motor, PMSM, surface magnets, buried magnets

Generating highly balanced sudoku problems as hard problems

Sudoku problems are some of the most known and enjoyed pastimes, with a never diminishing popularity, but, for the last few years those problems have gone from an entertainment to an interesting research area, a twofold interesting area, in fact. On the one side Sudoku problems, being a variant of Gerechte Designs and Latin Squares, are being actively used for experimental design, as in [8, 44, 39, 9]. On the other hand, Sudoku problems, as simple as they seem, are really hard structured combinatorial search problems, and thanks to their characteristics and behavior, they can be used as benchmark problems for refining and testing solving algorithms and approaches. Also, thanks to their high inner structure, their study can contribute more than studies of random problems to our goal of solving real-world problems and applications and understanding problem characteristics that make them hard to solve. In this work we use two techniques for solving and modeling Sudoku problems, namely, Constraint Satisfaction Problem (CSP) and Satisfiability Problem (SAT) approaches. To this effect we define the Generalized Sudoku Problem (GSP), where regions can be of rectangular shape, problems can be of any order, and solution existence is not guaranteed. With respect to the worst-case complexity, we prove that GSP with block regions of m rows and n columns with m = n is NP-complete. For studying the empirical hardness of GSP, we define a series of instance generators, that differ in the balancing level they guarantee between the constraints of the problem, by finely controlling how the holes are distributed in the cells of the GSP. Experimentally, we show that the more balanced are the constraints, the higher the complexity of solving the GSP instances, and that GSP is harder than the Quasigroup Completion Problem (QCP), a problem generalized by GSP. Finally, we provide a study of the correlation between backbone variables – variables with the same value in all the solutions of an instance– and hardness of GSP.

The impact of balancing on problem hardness in a highly structured domain

Random problem distributions have played a key role in the study and design of algorithms for constraint satisfaction and Boolean satisfiability, as well as in ourunderstanding of problem hardness, beyond standard worst-case complexity. We consider random problem distributions from a highly structured problem domain that generalizes the Quasigroup Completion problem (QCP) and Quasigroup with Holes (QWH), a widely used domain that captures the structure underlying a range of real-world applications. Our problem domain is also a generalization of the well-known Sudoku puz- zle: we consider Sudoku instances of arbitrary order, with the additional generalization that the block regions can have rectangular shape, in addition to the standard square shape. We evaluate the computational hardness of Generalized Sudoku instances, for different parameter settings. Our experimental hardness results show that we can generate instances that are considerably harder than QCP/QWH instances of the same size. More interestingly, we show the impact of different balancing strategies on problem hardness. We also provide insights into backbone variables in Generalized Sudoku instances and how they correlate to problem hardness.

Grafting of Araucaria angustifolia (BERTOL.) kuntze through the four seasons of the year

Araucaria angustifolia is an endangered conifer species of South America that has been over exploited for timber. To incentivize Araucaria angustifolia planting is essential and may play a key role on the conservation of this species and the ecosystems that depend on it. Hence, techniques that allow the production of seedlings with attributes that may entice farmers to plant A. angustifolia trees are very important. Grafting may permit the selection of female trees and the production of precocious plants that will produce high quality seeds. The aim of this study was to determine the best season of the year to graft. Three-year-old seedlings were used as rootstock and orthotropic branches of young plants were used for scion collection. The technique used for the grafting was the bark patch. This procedure was carried out in the beginning of each season in 2007 and 2008, with a total of 160 grafted plants. Grafting carried out in the beginning of autumn had a 50 % success rate. Grafting success was negligible for all remaining seasons. In conclusion, grafting through bark patching is a viable technique for the production of A. angustifolia seedlings. Future research should be carried out to produce grafted seedlings in large-scale.

Paperikoneiden työskentelytasojen vaatimusten mukainen suunnittelu

Työtasojen kantavien rakenteiden on kestettävä riittävällä varmuudella mm. henkilökuormasta aiheutuvat jännitykset rakenneosissa. Lisäksi tasot eivät saa tuntua notkuvilta niillä käveltäessä, joten rakenteen siirtymille asetetaan rajoituksia. Työssä esitetään yleisimmin epäselvyyttä aiheuttaneet paperikoneiden työskentelytasoille asetetut vaatimukset. Vaatimukset ja niiden täyttäminen esitetään yksiselitteisellä tavalla esimerkiksi sovellettavien kuormitusten osalta. Materiaaliominaisuuksien osalta esitetään tärkeimmät työtasojen suunnittelussa huomioon otettavat asiat yleisimmille austeniittisille ruostumattomille teräksille ja alumiiniseoksille. Työtasorakenteiden mitoitusohjeet esitetään ritilöille, kulmaprofiilista valmistetuille jalkalistoille ja putkipalkista valmistetuille työtasojen kannattimille. Mitoituksessa otetaan myötöehdon ja siirtymärajoitusten lisäksi huomioon mm. levykenttien lommahdus. Kannattimien mitoituksessa otetaan huomioon vinoutuvien liitosten joustavuus ja kestävyys. Lisäksi esitetään mitoitusohjeet kitkaliitoksena toimivalle päätylevyliitokselle, johon kohdistuu mm. taivutus- ja vääntömomenttia.

Incidence, prevalence and clinical significance of abnormal hematological indices in compensated cirrhosis.

Background & Aims: Patients with cirrhosis develop abnormal hematologic indices (HI) from multiple factors, including hypersplenism. We aimed to analyze the sequence of events and determine whether abnormal HI has prog-nostic significance. Methods: We analyzed a database of 213 subjects with compensated cirrhosis without esopha-geal varices. Subjects were followed for approximately 9 years until the development of varices or variceal bleeding or completion of the study; 84 subjects developed varices. Abnormal HI was defined as anemia at baseline (hemoglo-bin,<13.5 g/dL for men and 11.5 g/dL for women), leuko-penia (white blood cell counts,<4000/mm 3 ), or thrombo-cytopenia (platelet counts, < 150,000/mm 3 ). The primary end points were death or transplant surgery. Results: Most subjects had thrombocytopenia at baseline. Kaplan-Meier analysis showed that leukopenia occurred by 30 months (95% confidence interval, 18.5-53.6), and anemia occurred by 39.6 months (95% confidence interval, 24.1-49.9). Baseline thrombocytopenia (P .0191) and leukope-nia (P.0383) were predictors of death or transplant, after adjusting for baseline hepatic venous pressure gradient (HVPG), and Child-Pugh scores. After a median of 5 years,a significant difference in death or transplant, mortality,and clinical decompensation was observed in patients who had leukopenia combined with thrombocytopenia at base- line compared with patients with normal HI (P < .0001). HVPG correlated with hemoglobin and white blood cell count (hemoglobin, r 0.35, P < .0001; white blood cell count, r 0.31, P < .0001). Conclusions: Thrombocy-topenia is the most common and first abnormal HI to occurin patients with cirrhosis, followed by leukopenia and anemia. A combination of leukopenia and thrombocytopenia at baselin predicted increased morbidity and mortality.