887 resultados para Range (Vehicles).
Resumo:
The Cascade Mountain Range in Washington State is the site of several active volcanoes that have the potential to erupt which would deeply affect the lives of those who live near them. This study explores the hazard areas associated with the five largest volcanoes in the region: Mt. Baker, Glacier Peak, Mt. Rainier, Mt. Adams and Mt. St. Helens. It was determined which geographic regions would be affected by tephra, pyroclastic blasts and lahar flows and the associated populations that live in each of these areas. The level of emergency preparedness necessary for a volcanic eruption could be better determined based on the findings of this study.
Resumo:
We estimate optimal target-ranges of capital structure controlling for a series of firmspecific characteristics and accounting for the serial correlation that arises from the dynamic component of the leverage choice. Then, we empirically examine if firms adjust their leverages toward the estimated optimal ranges. Our analysis suggests that the observed behavior of firms is consistent with the notion of range-adjustment.
Resumo:
Este trabalho tem como objetivo construir um referencial teórico que auxilie no entendimento de como a Agroenergia poderá impactar o mercado de terras no Brasil. Posteriormente, analisar os reflexos desta nova conjuntura no coeficiente de elasticidade de uso da terra, para a cultura da cana-de-açúcar, no Estado de São Paulo, após a introdução dos veículos flex-fuel no mercado brasileiro. Os aspectos relacionados ao mercado de terras, suas definições e características de uso, têm sido objeto de estudo de muitos pensadores e economistas, desde o final do século XIX. Motivado por esta afirmação, procurou-se realizar uma revisão de literatura para entender as diferentes linhas do pensamento econômico em relação às principais variáveis que compõem a formação de preço e a dinâmica do mercado de terras. Segundo a teoria neoclássica, o valor da terra está intrinsecamente associado à sua capacidade de produção. Aliado a esta característica, também é fundamental entender os atributos da terra como ativo real, seja na expectativa de ganhos de capital ou reserva de valor. Com o intuito de contribuir para esta discussão, foi proposto um fluxograma, que identificou como as variáveis deveriam se correlacionar e impactar na formação do preço das terras agrícolas. É possível afirmar que, no curto prazo, a Agroenergia impactará o valor das terras agrícolas, via preço das commodities, características de ativo real, especialmente na aposta de ganhos de capital e devido ao aumento das políticas governamentais relacionados à produção de biocombustíveis. Em relação ao coeficiente de elasticidade da área de cana-de-açúcar, em São Paulo, em relação a expectativa de preço da tonelada equivalente de ATR, para o açúcar e o etanol, observou-se que a cultura de cana-de-açúcar se tornou mais sensível às variações no preço da tonelada de ATR, expandindo a área cultivada com uma menor variação na expectativa de preço, após a introdução dos veículos flex-fuel no mercado nacional.
Resumo:
Este trabalho propõe um instrumento capaz de absorver choques no par BRL/USD, garantindo ao seu detentor a possibilidade de realizar a conversão entre essas moedas a uma taxa observada recentemente. O Volatility Triggered Range Forward assemelha-se a um instrumento forward comum, cujo preço de entrega não é conhecido inicialmente, mas definido no momento em que um nível de volatilidade pré-determinado for atingido na cotação das moedas ao longo da vida do instrumento. Seu cronograma de ajustes pode ser definido para um número qualquer de períodos. Seu apreçamento e controle de riscos é baseado em uma árvore trinomial ponderada entre dois possíveis regimes de volatilidade. Esses regimes são determinados após um estudo na série BRL/USD no período entre 2003 e 2009, basedo em um modelo Switching Autoregressive Conditional Heteroskedasticity (SWARCH).
Resumo:
Os estudos sobre consumo de etanol para veículos leves no Brasil geram bastante interesse para pesquisadores de diversas partes do mundo, dada a possibilidade de investigar características chaves sobre o comportamento do consumidor desse produto. Esta dissertação propõe um estudo que estima a equação de demanda de etanol no Brasil com o objetivo de investigar a existência de inércia na decisão de consumo, que neste trabalho chamaremos de hábito. Foi ajustado um modelo econométrico em dois estágios com dados mensais da ANP, utilizando-se variáveis instrumentais que controlaram a endogeneidade dos preços, para procurar evidências empíricas sobre a influência da inércia na decisão de consumo. Os estados foram classificados em termos das paridades de preço etanol-gasolina (próximos ou distantes do valor de 70%) e em termos de renda (ricos ou pobres). A análise foi dividida em dois períodos para se capturar a influência da entrada da frota flex-fuel na economia brasileira. Por fim foram construídos cenários baseados em médias móveis (para o cálculo das paridades de preço dos combustíveis) para investigar a influência do hábito na decisão de consumo. Concluiu-se que há diferenças significativas nos valores das elasticidades-preço próprias e cruzadas entre os dois períodos estudados e para as diferentes faixas de paridades de preços e classificação de renda. Evidências da influência da inércia na decisão do consumo foram encontradas apenas para os estados classificados como ricos, pois se encontrou diferenças nas magnitudes das elasticidades de preços entre faixas de paridade apenas ao se considerar os critérios de maior estabilidade no tempo, fornecendo indícios de que consumidores desses estados são capazes de adotar uma opção menos vantajosa (em termos de rendimento) como consequência da inércia na decisão de consumo. Para os estados classificados como pobre isto não foi evidenciado.
Resumo:
Este estudo analisa a integração da sustentabilidade ambiental na estratégia das empresas no contexto da indústria automobilística. A implementação de estratégias de sustentabilidade e o desenvolvimento de veículos híbrido-elétricos são investigados com referência ao caso de um ator principal na indústria. Entre as aplicações de mobilidade eléctrica, que irá aumentar a presença no mercado nos próximos anos devido às regulamentações rigorosas e as preferências dos clientes, a pesquisa está focada em veículos híbrido-elétricos. As estratégias de sustentabilidade das grandes fabricantes de automóveis e as implicações subsequentes em termos de desenvolvimento de produtos, com uma atenção especial aos veículos elétricos híbridos, foram analisados através de dados secundários. Além disso, os dados primários foram coletados sobre a estratégia de sustentabilidade de um ator importante na indústria e usados para realizar um estudo de caso. A análise incidiu sobre os fatores críticos e os aspectos que têm impacto sobre as estratégias de sustentabilidade, que visam reduzir o impacto ambiental da indústria automobilística, e sobre o desenvolvimento de veículos híbridos. A análise dos dados mostrou que a Fiat-Chrysler Automobiles (FCA) teve uma ênfase menor na mobilidade eléctrica em termos de relatórios de sustentabilidade. A conclusão apresenta uma avaliação da estratégia corporativa da FCA, em termos de sustentabilidade ambiental, e apresenta um quadro para o desenvolvimento de veículos híbridos com quatro abordagens diferentes que têm impacto sobre a estratégia de sustentabilidade de uma montadora.
Resumo:
Nota: A autora agradece à Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) pela concessão de bolsa de estudos para o desenvolvimento deste projeto de pesquisa.
Resumo:
Disease, injury, and age problems compromise human quality of life and continuously motivate the search for new and more efficacious therapeutic approaches. The field of Tissue Regeneration and Engineering has greatly evolved over the last years, mainly due to the combination of the important advances verified in Biomaterials Science and Engineering with those of Cell and Molecular Biology. In particular, a new and promising area arose – Nanomedicine – that takes advantage of the extremely small size and especial chemical and physical properties of Nanomaterials, offering powerful tools for health improvement. Research on Stem Cells, the self-renewing progenitors of body tissues, is also challenging to the medical and scientific communities, being expectable the appearance of new and exciting stem cell-based therapies in the next years. The control of cell behavior (namely, of cell proliferation and differentiation) is of key importance in devising strategies for Tissue Regeneration and Engineering. Cytokines, growth factors, transcription factors and other signaling molecules, most of them proteins, have been identified and found to regulate and support tissue development and regeneration. However, the application of these molecules in long-term regenerative processes requires their continuous presence at high concentrations as they usually present short half-lives at physiological conditions and may be rapidly cleared from the body. Alternatively, genes encoding such proteins can be introduced inside cells and be expressed using cell’s machinery, allowing an extended and more sustained production of the protein of interest (gene therapy). Genetic engineering of stem cells is particularly attractive because of their self-renewal capability and differentiation potential. For Tissue Regeneration and Engineering purposes, the patient’s own stem cells can be genetically engineered in vitro and, after, introduced in the body (with or without a scaffold) where they will not only modulate the behavior of native cells (stem cell-mediated gene therapy), but also directly participate in tissue repair. Cells can be genetically engineered using viral and non-viral systems. Viruses, as a result of millions of years of evolution, are very effective for the delivery of genes in several types of cells, including cells from primary sources. However, the risks associated with their use (like infection and immunogenic reactions) are driving the search for non-viral systems that will efficiently deliver genetic material into cells. Among them, chemical methods that are promising and being investigated use cationic molecules as carriers for DNA. In this case, gene delivery and gene expression level remain relatively low when primary cells are used. The main goal of this thesis was to develop and assess the in vitro potential of polyamidoamine (PAMAM) dendrimers based carriers to deliver genes to mesenchymal stem cells (MSCs). PAMAM dendrimers are monodispersive, hyperbranched and nanospherical molecules presenting unique characteristics that make them very attractive vehicles for both drug and gene delivery. Although they have been explored for gene delivery in a wide range of cell lines, the interaction and the usefulness of these molecules in the delivery of genes to MSCs remains a field to be explored. Adult MSCs were chosen for the studies due to their potential biomedical applications (they are considered multipotent cells) and because they present several advantages over embryonic stem cells, such as easy accessibility and the inexistence of ethical restrictions to their use. This thesis is divided in 5 interconnected chapters. Chapter I provides an overview of the current literature concerning the various non-viral systems investigated for gene delivery in MSCs. Attention is devoted to physical methods, as well as to chemical methods that make use of polymers (natural and synthetic), liposomes, and inorganic nanoparticles as gene delivery vectors. Also, it summarizes the current applications of genetically engineered mesenchymal stem cells using non-viral systems in regenerative medicine, with special focus on bone tissue regeneration. In Chapter II, the potential of native PAMAM dendrimers with amine termini to transfect MSCs is evaluated. The level of transfection achieved with the dendrimers is, in a first step, studied using a plasmid DNA (pDNA) encoding for the β-galactosidase reporter gene. The effect of dendrimer’s generation, cell passage number, and N:P ratio (where N= number of primary amines in the dendrimer; P= number of phosphate groups in the pDNA backbone) on the level of transfection is evaluated, being the values always very low. In a second step, a pDNA encoding for bone morphogenetic protein-2, a protein that is known for its role in MSCs proliferation and differentiation, is used. The BMP-2 content produced by transfected cells is evaluated by an ELISA assay and its effect on the osteogenic markers is analyzed through several classical assays including alkaline phosphatase activity (an early marker of osteogenesis), osteocalcin production, calcium deposition and mineralized nodules formation (late osteogenesis markers). Results show that a low transfection level is enough to induce in vitro osteogenic differentiation in MSCs. Next, from Chapter III to Chapter V, studies are shown where several strategies are adopted to change the interaction of PAMAM dendrimers with MSCs cell membrane and, as a consequence, to enhance the levels of gene delivery. In Chapter III, generations 5 and 6 of PAMAM dendrimers are surface functionalized with arginine-glycine-aspartic acid (RGD) containing peptides – experiments with dendrimers conjugated to 4, 8 and 16 RGD units were performed. The underlying concept is that by including the RGD integrin-binding motif in the design of the vectors and by forming RGD clusters, the level of transfection will increase as MSCs highly express integrins at their surface. Results show that cellular uptake of functionalized dendrimers and gene expression is enhanced in comparison with the native dendrimers. Furthermore, gene expression is dependent on both the electrostatic interaction established between the dendrimer moiety and the cell surface and the nanocluster RGD density. In Chapter IV, a new family of gene delivery vectors is synthesized consisting of a PAMAM dendrimer (generation 5) core randomly linked at the periphery to alkyl hydrophobic chains that vary in length and number. Herein, the idea is to take advantage of both the cationic nature of the dendrimer and the capacity of lipids to interact with biological membranes. These new vectors show a remarkable capacity for internalizing pDNA, being this effect positively correlated with the –CH2– content present in the hydrophobic corona. Gene expression is also greatly enhanced using the new vectors but, in this case, the higher efficiency is shown by the vectors containing the smallest hydrophobic chains. Finally, chapter V reports the synthesis, characterization and evaluation of novel gene delivery vectors based on PAMAM dendrimers (generation 5) conjugated to peptides with high affinity for MSCs membrane binding - for comparison, experiments are also done with a peptide with low affinity binding properties. These systems present low cytotoxicity and transfection efficiencies superior to those of native dendrimers and partially degraded dendrimers (Superfect®, a commercial product). Furthermore, with this biomimetic approach, the process of gene delivery is shown to be cell surface receptor-mediated. Overall, results show the potential of PAMAM dendrimers to be used, as such or modified, in Tissue Regeneration and Engineering. To our knowledge, this is the first time that PAMAM dendrimers are studied as gene delivery vehicles in this context and using, as target, a cell type with clinical relevancy. It is shown that the cationic nature of PAMAM dendrimers with amine termini can be synergistically combined with surface engineering approaches, which will ultimately result in suitable interactions with the cytoplasmic membrane and enhanced pDNA cellular entry and gene expression. Nevertheless, the quantity of pDNA detected inside cell nucleus is always very small when compared with the bigger amount reaching cytoplasm (accumulation of pDNA is evident in the perinuclear region), suggesting that the main barrier to transfection is the nuclear membrane. Future work can then be envisaged based on the versatility of these systems as biomedical molecular materials, such as the conjugation of PAMAM dendrimers to molecules able to bind nuclear membrane receptors and to promote nuclear translocation.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The brown-nosed coati (Nasua nasua) is a carnivorous species found in all the Brazilian biomes, some of which are endangered areas. The aim of this work was to determine the habitat use and selection, home range and core area of N. nasua in the Cerrado biome, central region of Tocantins, Brazil. The study was carried out in an area of approximately 20 000ha from May 2000 to July 2002. A total of seven box traps were placed in the area for 13 months, three of 11 captured animals were followed and monitored by radio-tracking during 13 months. The monitoring was conducted once a day, three times a week using a car and walking through the study area (radio-tracking and visual contact). The results demonstrate that these three males used more frequently the gallery forest formation, followed by cerrado and wetlands. The use of gallery forest by these animals indicated an habitat selection (Proportion test, z=12.98, p< 0.01). Besides, adult males used the gallery forest more frequently (Fisher's exact test, p<0.01) and wetlands less frequently (Fisher's exact test, p<0.01) than juvenile males, without significant differences between animal ages for cerrado percentage of habitat use. Besides, results also showed a gallery forest selection by adult (Proportion test z= 13.62, p<0.01) and juvenile (Proportion test z=2.68, p<0.01) males, and a wetland selection by the juvenile male (Proportion test z=3.90, p<0.01). The home ranges varied from 2.20 to 7.55km2 for the Minimum Convex Polygon 100% (MCP 100%) and from 4.38 to 13.32km2 for the Harmonic Mean 95% (HM 95%). The smallest home range overlap occurred between the adult males (Nm1 and Nm3), and the greatest between the juvenile Njm2 and the adult Nm1. The average of the core area (HM 75%) for the three monitored animals represented 21.29% of the home range calculated with HM 95%. No overlap between core areas was observed for adult males, but, it was an overlap between the core area of the juvenile male and its band with that of the two adult males. The present study provides new data on core area size and frequency habitat use by adult and juvenile males of N. nasua in the Brazilian Cerrado, that may support conservation efforts. Rev. Biol. Trop. 58 (3): 1069-1077. Epub 2010 September 01.
Resumo:
Three assays were carried out to determine the digestible methionine+cystine (Met+Cys) requirement for ISA Label broilers from both sexes. The birds were reared in free range system on starting phase (1 to 28 days), growing phase (28 to 56 days) and finishing phase (56 to 84 days). Four hundred and eighty birds were distributed into 24 pens, each one composed of shelter (3.13 m(2)) and pasture (72.87 m(2)). The experimental design was completely randomized with eight treatments as factorial arrangement (four Met+Cys levels and two sexes) with three replicates of 20 birds. The digestible Met+Cys levels were 0.532; 0.652; 0.772; 0.892% for starting phase; 0.515; 0.635; 0.755; 0.875% for growing phase and 0.469; 0.589; 0.709; 0.829% for finishing phase. The analyzed parameters were performance, carcass yield, body protein and fat deposition, weight and protein concentration in feathers. In the starting phase, the digestible Met+Cys level estimated for males was 0.765 and 0.803% for females, corresponding to 0.252 and 0.268% of Met+Cys/Mcal of ME, respectively. For the growing phase, the digestible Met+Cys level estimated was 0.716% for both sexes, corresponding to 0.235% of Met+Cys/Mcal of ME. For the finishing phase, the Met+Cys levels were 0.756 and 0.597% for males and females, corresponding to 0.244 and 0.193% of Met+Cys/Mcal of ME respectively.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)