Community-based organizations on Lake Victoria: a lesson from the Tweyambe Fishing Enterprise in Muleba District, Kagera Region, Tanzania

This paper is aimed at government, non-government organizations, intergovernmental organizations and the general public as they work toward the development of their individual strategies and action plans. It has been recognized that community-based organizations have a particular relevance to the pursuit of sustainable resource management and may well contribute to the foundations of self-sustenance. Women on Lake Victoria, Tanzania presently face great challenges within the fishery. These include the lack of capital, interference by men, theft of fishing gear, time constraints and socio-cultural problems. In recent years, the fish trading and marketing sectors of the fishery, which have traditionally been dominated by women, have seen large incursions by male entrepreneurs. This move has endangered the role of women within the fishery. This paper focuses on the Tweyambe Fishing Enterprise (TFE), a well-known women's group based in Kasheno village in the Muleba District of Kagera Region in northwestern Tanzania. Inhabitants from the Haya ethnic group who make up some 95% of the population of Kagera Region dominate this village. The TFE has a series of initiatives aimed towards ecologically sound self-development

Fluorescence optofluidic microscopy and fluorescence microscopy based on the Talbot effect

Light microscopy has been one of the most common tools in biological research, because of its high resolution and non-invasive nature of the light. Due to its high sensitivity and specificity, fluorescence is one of the most important readout modes of light microscopy. This thesis presents two new fluorescence microscopic imaging techniques: fluorescence optofluidic microscopy and fluorescent Talbot microscopy. The designs of the two systems are fundamentally different from conventional microscopy, which makes compact and portable devices possible. The components of the devices are suitable for mass-production, making the microscopic imaging system more affordable for biological research and clinical diagnostics.

Fluorescence optofluidic microscopy (FOFM) is capable of imaging fluorescent samples in fluid media. The FOFM employs an array of Fresnel zone plates (FZP) to generate an array of focused light spots within a microfluidic channel. As a sample flows through the channel and across the array of focused light spots, a filter-coated CMOS sensor collects the fluorescence emissions. The collected data can then be processed to render a fluorescence microscopic image. The resolution, which is determined by the focused light spot size, is experimentally measured to be 0.65 μm.

Fluorescence Talbot microscopy (FTM) is a fluorescence chip-scale microscopy technique that enables large field-of-view (FOV) and high-resolution imaging. The FTM method utilizes the Talbot effect to project a grid of focused excitation light spots onto the sample. The sample is placed on a filter-coated CMOS sensor chip. The fluorescence emissions associated with each focal spot are collected by the sensor chip and are composed into a sparsely sampled fluorescence image. By raster scanning the Talbot focal spot grid across the sample and collecting a sequence of sparse images, a filled-in high-resolution fluorescence image can be reconstructed. In contrast to a conventional microscope, a collection efficiency, resolution, and FOV are not tied to each other for this technique. The FOV of FTM is directly scalable. Our FTM prototype has demonstrated a resolution of 1.2 μm, and the collection efficiency equivalent to a conventional microscope objective with a 0.70 N.A. The FOV is 3.9 mm × 3.5 mm, which is 100 times larger than that of a 20X/0.40 N.A. conventional microscope objective. Due to its large FOV, high collection efficiency, compactness, and its potential for integration with other on-chip devices, FTM is suitable for diverse applications, such as point-of-care diagnostics, large-scale functional screens, and long-term automated imaging.

A ratiometric-based measure of gene co-expression

Current measures of global gene expression analyses, such as correlation and mutual information-based approaches, largely depend on the degree of association between mRNA levels and to a lesser extent on variability. I develop and implement a new approach, called the Ratiometric method, which is based on the coefficient of variation of the expression ratio of two genes, relying more on variation than previous methods. The advantage of such modus operandi is the ability to detect possible gene pair interactions regardless of the degree of expression dispersion across the sample group. Gene pairs with low expression dispersion, i.e., their absolute expressions remain constant across the sample group, are systematically missed by correlation and mutual information analyses. The superiority of the Ratiometric method in finding these gene pair interactions is demonstrated in a data set of RNA-seq B-cell samples from the 1000 Genomes Project Consortium. The Ratiometric method renders a more comprehensive recovery of KEGG pathways and GO-terms.

The Equivalency Principle for Discounting the Value of Natural Assets: An Application to an Investment Project in the Basque Coast

25 p.

Effects of flow regime on the young stages of salmonid fishes. Summary and conclusions based on results for 1981-1985

The main British salmonid species spawn in clean gravel in streams and rivers, many of them in the upland areas of Britain. The earliest stages of the life cycle (eggs and alevins) spend some months within the gravel of the river bed. During this period their survival rate can be strongly influenced by flow regime and by related phenomena such as movement of coarse river bed material, changes in water level and the deposition of silt. In recent years human influence upon the flow regimes of upland water courses and upon the sediment inputs to them has increased. In order to conserve and, if possible, enhance the populations of salmonid fishes a deeper understanding of the interrelationships between survival of young salmonids and flow-related phenomena is needed. The acquisition of appropriate information is the main aim of the present project, which included: Studies on silt movement and the infilling of gravel voids by fine sediments, together with initial studies on the relationship between intragravel oxygen supply rate and the survival of intragravel stages of salmonids; studies in the general field of egg washout. The latter investigated the physical background to gravel bed disruption, the examination of the physical characteristics of sites chosen for redds, dimensions of redds and burial depth of eggs relative to the size of the fish constructing the redd and a series of smaller studies on other aspects of egg washout.

A high-speed image sensing technique with adjustable frame rate based on an ordinary CCD

In the sinusoidal phase modulating interferometer technique, the high-speed CCD is necessary to detect the interference signals. The reason of ordinary CCD's low frame rate was analyzed, and a novel high-speed image sensing technique with adjustable frame rate based on ail ordinary CCD was proposed. And the principle of the image sensor was analyzed. When the maximum frequency and channel bandwidth were constant, a custom high-speed sensor was designed by using the ordinary CCD under the control of the special driving circuit. The frame rate of the ordinary CCD has been enhanced by controlling the number of pixels of every frame; therefore, the ordinary of CCD can be used as the high frame rate image sensor with small amount of pixels. The multi-output high-speed image sensor has the deficiencies of low accuracy, and high cost, while the high-speed image senor with small number of pixels by using this technique can overcome theses faults. The light intensity varying with time was measured by using the image sensor. The frame rate was LIP to 1600 frame per second (f/s), and the size of every frame and the frame rate were adjustable. The correlation coefficient between the measurement result and the standard values were higher than 0.98026, and the relative error was lower than 0.53%. The experimental results show that this sensor is fit to the measurements of sinusoidal phase modulating interferometer technique. (c) 2007 Elsevier GmbH. All rights reserved.

Development of a Cationic Mucic Acid Polymer-Based Nanoparticle siRNA Delivery System

Cancer chemotherapy has advanced from highly toxic drugs to more targeted treatments in the last 70 years. Chapter 1 opens with an introduction to targeted therapy for cancer. The benefits of using a nanoparticle to deliver therapeutics are discussed. We move on to siRNA in particular, and why it would be advantageous as a therapy. Specific to siRNA delivery are some challenges, such as nuclease degradation, quick clearance from circulation, needing to enter cells, and getting to the cytosol. We propose the development of a nanoparticle delivery system to tackle these challenges so that siRNA can be effective.

Chapter 2 of this thesis discusses the synthesis and analysis of a cationic mucic acid polymer (cMAP) which condenses siRNA to form a nanoparticle. Various methods to add polyethylene glycol (PEG) for stabilizing the nanoparticle in physiologic solutions, including using a boronic acid binding to diols on mucic acid, forming a copolymer of cMAP with PEG, and creating a triblock with mPEG on both ends of cMAP. The goal of these various pegylation strategies was to increase the circulation time of the siRNA nanoparticle in the bloodstream to allow more of the nanoparticle to reach tumor tissue by the enhanced permeation and retention effect. We found that the triblock mPEG-cMAP-PEGm polymer condensed siRNA to form very stable 30-40 nm particles that circulated for the longest time – almost 10% of the formulation remained in the bloodstream of mice 1 h after intravenous injection.

Chapter 3 explores the use of an antibody as a targeting agent for nanoparticles. Some antibodies of the IgG1 subtype are able to recruit natural killer cells that effect antibody dependent cellular cytotoxicity (ADCC) to kill the targeted cell to which the antibody is bound. There is evidence that the ADCC effect remains in antibody-drug conjugates, so we wanted to know whether the ADCC effect is preserved when the antibody is bound to a nanoparticle, which is a much larger and complex entity. We utilized antibodies against epidermal growth factor receptor with similar binding and pharmacokinetics, cetuximab and panitumumab, which differ in that cetuximab is an IgG1 and panitumumab is an IgG2 (which does not cause ADCC). Although a natural killer cell culture model showed that gold nanoparticles with a full antibody targeting agent can elicit target cell lysis, we found that this effect was not preserved in vivo. Whether this is due to the antibody not being accessible to immune cells or whether the natural killer cells are inactivated in a tumor xenograft remains unknown. It is possible that using a full antibody still has value if there are immune functions which are altered in a complex in vivo environment that are intact in an in vitro system, so the value of using a full antibody as a targeting agent versus using an antibody fragment or a protein such as transferrin is still open to further exploration.

In chapter 4, nanoparticle targeting and endosomal escape are further discussed with respect to the cMAP nanoparticle system. A diboronic acid entity, which gives an order of magnitude greater binding (than boronic acid) to cMAP due to the vicinal diols in mucic acid, was synthesized, attached to 5kD or 10kD PEG, and conjugated to either transferrin or cetuximab. A histidine was incorporated into the triblock polymer between cMAP and the PEG blocks to allow for siRNA endosomal escape. Nanoparticle size remained 30-40 nm with a slightly negative ca. -3 mV zeta potential with the triblock polymer containing histidine and when targeting agents were added. Greater mRNA knockdown was seen with the endosomal escape mechanism than without. The nanoparticle formulations were able to knock down the targeted mRNA in vitro. Mixed effects suggesting function were seen in vivo.

Chapter 5 summarizes the project and provides an outlook on siRNA delivery as well as targeted combination therapies for the future of personalized medicine in cancer treatment.

Stability analysis of RF amplifiers based on MIMO pole-zero identification

Spurious oscillations are one of the principal issues faced by microwave and RF circuit designers. The rigorous detection of instabilities or the characterization of measured spurious oscillations is still an ongoing challenge. This project aims to create a new stability analysis CAD program that tackles this chal- lenge. Multiple Input Multiple Output (MIMO) pole-zero identification analysis is introduced on the program as a way to create new methods to automate the stability analysis process and to help designers comprehend the obtained results and prevent incorrect interpretations. The MIMO nature of the analysis contributes to eliminate possible controllability and observability losses and helps differentiate mathematical and physical quasi-cancellations, products of overmodeling. The created program reads Single Input Single Output (SISO) or MIMO frequency response data, and determines the corresponding continuous transfer functions with Vector Fitting. Once the transfer function is calculated, the corresponding pole/zero diagram is mapped enabling the designers to analyze the stability of an amplifier. Three data processing methods are introduced, two of which consist of pole/zero elimina- tions and the latter one on determining the critical nodes of an amplifier. The first pole/zero elimination method is based on eliminating non resonant poles, whilst the second method eliminates the poles with small residue by assuming that their effect on the dynamics of a system is small or non-existent. The critical node detection is also based on the residues; the node at which the effect of a pole on the dynamics is highest is defined as the critical node. In order to evaluate and check the efficiency of the created program, it is compared via examples with another existing commercial stability analysis tool (STAN tool). In this report, the newly created tool is proved to be as rigorous as STAN for detecting instabilities. Additionally, it is determined that the MIMO analysis is a very profitable addition to stability analysis, since it helps to eliminate possible problems of loss of controllability, observability and overmodeling.

Structural capital, innovation capability, and company performance in technology-based colombian firms

[EN] In today s economy, innovation is considered to be one of the main driving forces behind business competitiveness, if not the most relevant one. Traditionally, the study of innovation has been addressed from different perspectives. Recently, literature on knowledge management and intellectual capital has provided new insights. Considering this, the aim of this paper is to analyze the impact of different organizational conditions i.e. structural capital on innovation capability and innovation performance, from an intellectual capital (IC) perspective. As regards innovation capability, two dimensions are considered: new idea generation and innovation project management. The population subject to study is made up of technology-based Colombian firms. In order to gather information about the relevant variables involved in the research, a questionnaire was designed and addressed to the CEOs of the companies making up the target population. The sample analyzed is made up of 69 companies and is large enough to carry out a statistical study based on structural equation modelling (partial least squares approach) using PLS-Graph software (Chin and Frye, 2003). The results obtained show that structural capital explains to a great extent both the effectiveness of the new idea generation process and of innovation project management. However, the influence of each specific organizational component making up structural capital (organizational design, organizational culture, hiring and professional development policies, innovation strategy, technological capital, and external structure) varies. Moreover, successful innovation project management is the only innovation capability dimension that exerts a significant impact on company performance.

Algorithm of far-field centre estimation based on phase-only matched filter

Estimation of the far-field centre is carried out in beam auto-alignment. In this paper, the features of the far-field of a square beam are presented. Based on these features, a phase-only matched filter is designed, and the algorithm of centre estimation is developed. Using the simulated images with different kinds of noise and the 40 test images that are taken in sequence, the accuracy of this algorithm is estimated. Results show that the error is no more than one pixel for simulated noise images with a 99% probability, and the stability is restricted within one pixel for test images. Using the improved algorithm, the consumed time is reduced to 0.049 s.

A Real-Time Sliding Mode Control for a Wind Energy System Based on a Doubly Fed Induction Generator

In this paper, a real time sliding mode control scheme for a variable speed wind turbine that incorporates a doubly feed induction generator is described. In this design, the so-called vector control theory is applied, in order to simplify the system electrical equations. The proposed control scheme involves a low computational cost and therefore can be implemented in real-time applications using a low cost Digital Signal Processor (DSP). The stability analysis of the proposed sliding mode controller under disturbances and parameter uncertainties is provided using the Lyapunov stability theory. A new experimental platform has been designed and constructed in order to analyze the real-time performance of the proposed controller in a real system. Finally, the experimental validation carried out in the experimental platform shows; on the one hand that the proposed controller provides high-performance dynamic characteristics, and on the other hand that this scheme is robust with respect to the uncertainties that usually appear in the real systems.

Image-Based Delineation and Classification of Built Heritage Masonry

Fundacion Zain is developing new built heritage assessment protocols. The goal is to objectivize and standardize the analysis and decision process that leads to determining the degree of protection of built heritage in the Basque Country. The ultimate step in this objectivization and standardization effort will be the development of an information and communication technology (ICT) tool for the assessment of built heritage. This paper presents the ground work carried out to make this tool possible: the automatic, image-based delineation of stone masonry. This is a necessary first step in the development of the tool, as the built heritage that will be assessed consists of stone masonry construction, and many of the features analyzed can be characterized according to the geometry and arrangement of the stones. Much of the assessment is carried out through visual inspection. Thus, this process will be automated by applying image processing on digital images of the elements under inspection. The principal contribution of this paper is the automatic delineation the framework proposed. The other contribution is the performance evaluation of this delineation as the input to a classifier for a geometrically characterized feature of a built heritage object. The element chosen to perform this evaluation is the stone arrangement of masonry walls. The validity of the proposed framework is assessed on real images of masonry walls.

Stock evaluation and development of a breeding program for common carp (Cyprinus carpio) in Karnataka, India: progress of a research project

Common carp (Cyprinus carpio) is the single most important species for aquaculture in the state of Karnataka, India, where it is generally grown in polyculture with Indian major carps. Precocious maturation and unwanted reproduction in the species have been identified as constraints to increase production in aquaculture and culture-based fisheries in Karnataka state. Stocks of C. carpio obtained from Hungary (Amur and P3), Indonesia (Rajdanu) and Vietnam (SV) are being assessed alongside two local stocks (L-BRP and L-FRS) in a series of culture performance trials with the objective of setting up a base population for selective breeding. The paper presents progress of research being undertaken at the Fisheries Research Station, University of Agricultural Sciences, Bangalore, India.

Catching and rearing postlarval cleaner shrimp for the aquarium trade: results from a WorldFish Center project in Solomon Islands

Between 1999 and 2003, the WorldFish Center in Solomon Islands conducted research into the feasibility of a new fishery based on the capture and culture of postlarval coral reef fish for the live fish trade. The work was carried out in two phases: a research phase from late 1999 to the end of 2002; and a “finetuning” phase in 2003. Most of the species were of value to the marine aquarium trade, with very few live reef food fish recorded. The most valuable ornamentals were the banded cleaner shrimp, Stenopus species. Cleaner shrimp were harvested using crest nets, the method being modified with the addition of a solid, water-retaining cod-end designed to increase survival at capture. Grow-out techniques were improved by rearing the shrimp separately in jars to prevent aggression. The jars were painted black to protect the shrimp from sunlight. An economic model using experimental catch data and farm gate prices indicates that the fishery based on shrimp, supplemented with small numbers of lobster and fish is economically viable. The next step will be setting up a demonstration farm in a village in the Western Province of Solomon Islands.

Impact evaluation of community-based coastal resource management projects in the Philippines

The benefits of decentralizing the management of coastal resources to local governments and resource users have long been recognized, but the best systems for coastal resources management depend on many factors. A number of community-based management and co-management projects were started in the Philippines in the early 1980s. This report describes a comparative assessment of these projects to determine where improvements can be made in the design of future community-based coastal resource management projects. Early and continuing involvement by project beneficiaries is one of the factors that contributes to the success of the project development, implementation, and evaluation.