Sensory evaluation and nutritional value of cakes prepared with whole flaxseed flour

The objective of this study was to evaluate the nutritional value, the oxidative stabilitiy, and consumer acceptance of cakes containing four different concentrations of flaxseed flour (5, 15, 30 and 45%) as partial replacement for wheat flour. The oxidative stability of polyunsaturated fatty acids was evaluated through the lipid peroxidation test (TBARS) in the flour and cakes. Linolenic acid was determined by gas chromatography as well as contents of protein, lipid, ash, and dietary fiber. Consumer acceptance was assessed using a structured hedonic scale of nine points. The oxidative stability of lipid flaxseeds was not affected by the heat treatment during flour processing and cake baking. Cakes made with 5, 15, and 30% of flaxseed flour, the most accepted by consumers, had dietary fiber levels ranging from 3.5 to 6.2 g and linolenic acid ranging from 445 to 2,500 mg.100 g-1 of the product. The cakes received claims of good and excellent source of dietary fiber and linolenic acid, respectively, both are bioactive compounds. The use of up to 30% of flaxseed flour in the preparation of cakes is a useful strategy to optimize the consumption of food rich in functional ingredients.

Effect of the daily consumption of ostrich and bovine meat on the lipid metabolism in rats

The objective of this study is to evaluate the effect of the daily consumption of ostrich meat (lliofemuralis internus) and bovine meat (Psoas major) on the lipid metabolism in adult mice. The analyses of the centesimal composition of the meats and preparation of the diets were accomplished following the recommendations of the American Institute of Nutrition-AIN-93. Three groups of 150 day-old animals: group I (diet I, with casein), group II (diet II, with ostrich meat), and group III (diet III with bovine meat) were fed for 13 weeks with the respective diets and weight gain, food efficiency coefficient, total cholesterol, lipoprotein fractions, hepatic, transaminases and body fat percentage and hepatic fat content were evaluated. No difference (p < 0.05) it was found for weight gain and coefficients for feed efficiency among the groups. Total cholesterol, HDL-cholesterol, LDL-cholesterol, relationship of total cholesterol/HDL-cholesterol, VLDL, triglycerides and hepatic transaminases were also not different among the groups (p < 0.05). This research suggests that the consumption of ostrich meat or thin bovine meat on a daily basis does not raise concerns about weight gain, and an increase in the plasma concentrations of lipoprotein and levels of hepatic transaminase.

Production of isomaltulose obtained by Erwinia sp. cells submitted to different treatments and immobilized in calcium alginate

In recent decades, there has been an increase in the studies of isomaltulose obtainment, due to its physicochemical properties and physiological health benefits. These properties, which include low cariogenicity, low glycemic index and greater stability, allow the use of this sweetener as a substitute for sucrose in foods; besides the fact that it can be converted to isomalt, a dietary non-cariogenic sugar alcohol used in pharmaceuticals as well as in the food industry. Isomaltulose (6-O-α-D-glucopyronosyl-1-6-D-fructofuranose) is a disaccharide reducer obtained by the enzymatic conversion of sucrose - the α-glucosyltransferase enzyme. Different treatments were performed for the preparation of whole cells; lysed cells; and crude enzyme extract of Erwinia sp. D12 strain immobilized in calcium alginate. The packed bed column of granules, containing Erwinia sp. cells sonicated and immobilized in calcium alginate (CSI), reached a maximum conversion of 53-59% sucrose into isomaltulose and it presented activity for 480 hours. The converted syrup was purified and the isomaltulose crystallization was performed through the lowering of temperature. The isomaltulose crystals presented purity of 96.5%.

Optimization of extrusion process for production of nutritious pellets

A blend of 50% Potato Starch (PS), 35% Quality Protein Maize (QPM), and 15% Soybean Meal (SM) were used in the preparation of expanded pellets utilizing a laboratory extruder with a 1.5 × 20.0 × 100.0 mm die-nozzle. The independent variables analyzed were Barrel Temperature (BT) (75-140 °C) and Feed Moisture (FM) (16-30%). The effect of extrusion variables was investigated in terms of Expansion Index (EI), apparent density (ApD), Penetration Force (PF) and Specific Mechanical Energy (SME), viscosity profiles, DSC, crystallinity by X-ray diffraction, and Scanning Electronic Microscopy (SEM). The PF decreased from 30 to 4 kgf with the increase of both independent variables (BT and FM). SME was affected only by FM, and decreased with the increase in this variable. The optimal region showed that the maximum EI was found for BT in the range of 123-140 °C and 27-31% for FM, respectively. The extruded pellets obtained from the optimal processing region were probably not completely degraded, as shown in the structural characterization. Acceptable expanded pellets could be produced using a blend of PS, QPM, and SM by extrusion cooking.

Integration of cooking and vacuum cooling of carrots in a same vessel

Cooked vegetables are commonly used in the preparation of ready-to-eat foods. The integration of cooking and cooling of carrots and vacuum cooling in a single vessel is described in this paper. The combination of different methods of cooking and vacuum cooling was investigated. Integrated processes of cooking and vacuum cooling in a same vessel enabled obtaining cooked and cooled carrots at the final temperature of 10 ºC, which is adequate for preparing ready-to-eat foods safely. When cooking and cooling steps were performed with the samples immersed in boiling water, the effective weight loss was approximately 3.6%. When the cooking step was performed with the samples in boiling water or steamed, and the vacuum cooling was applied after draining the boiling water, water loss ranged between 15 and 20%, which caused changes in the product texture. This problem can be solved with rehydration using a small amount of sterile cold water. The instrumental textural properties of carrots samples rehydrated at both vacuum and atmospheric conditions were very similar. Therefore, the integrated process of cooking and vacuum cooling of carrots in a single vessel is a feasible alternative for processing such kind of foods.

Microbiological and physicochemical characterization of surimi obtained from waste of piramutaba fillet

The aim of this work was to perform the microbiological and physicochemical characterization of surimi made from waste of piramutaba filleting. The results of physicochemical characterization of the waste and surimi were: moisture (76.37 and 79.11%), total lipids (5.35 and 0.74%), proteins (14.92 and 10.79%), ash (3.03 and 2.35%), pH (6.9 and 7.4), caloric value (109.15 and 77.86 kcal.g-1), and water activity (both 0.98), respectively. The results of the levels of total volatile bases were 7.29 mgN/100-1 g (waste) and 7.01% carbohydrate (surimi). The values of total lipids and proteins were reduced during the preparation of surimi, probably due to successive washes during the processing. Waste and surimi were examined microbiologically and are in compliance with required parameters. The results show a loss of red (a* parameter) and yellow (b* parameter) color. On the other hand, the L* parameter (lightness) increased after the processing of surimi. It can be concluded that piramutaba waste can be used for surimi preparation and as a source of nutrients for human consumption, providing an alternative use of these wastes avoiding their disposal polluting the environment.

Bioactive compounds and acceptance of cookies made with Guava peel flour

The use of fruit industrial waste in the processing new foods represents an important new step for the food industry. This study aimed to develop cookie recipes using different amounts of guava peel flour (GPF) levels (30%, 50%, and 70%) to evaluate the proximate composition, and the phenolic compound, lycopene, and β-carotene levels in the cookies and flour and to evaluate the cookie sensory acceptance. The results demonstrated low moisture, lipid and carbohydrate contents in the flour and cookies. GPF was considered rich in fiber, ash, polyphenols, and β-carotene. The sensory analysis showed satisfactory acceptance of the cookies containing 30% GPF regarding the aroma, flavor, and texture attributes. The cookies containing 50% and 70% GPF received satisfactory acceptance regarding to aroma only. In conclusion, GPF can be used to partially replace wheat flour in the preparation of cookies to improve the nutritional quality without affecting the product sensory quality.

Development and chemical and sensory characterization of pumpkin seed flour-based cereal bars

Pumpkin (Cucurbita maxima), popularly known as squash, is a widely grown vegetable in Brazil. In this study, pumpkin seed flours (PSF) with different granulometries were used: PSF 1 (medium granulometry) and PSF 2 (coarse granulometry) in the preparation of cereal bars (CB) with different combinations with brown oats. Five formulations were prepared: CB-1 (control - 25% brown oats and 0% PSF); CB-2 (12.5% PSF 1 and 12.5% brown oats); CB-3 (25% PSF 1 and 0% brown oats); CB-4 (12.5% PSF 2 and 12.5% brown oats); and CB-5 (25% PSF 2 and 0% brown oats). The acceptance test results were analyzed in a conventional preference mapping which indicated that the bars CB-2 and CB-5 received mostly the maximum hedonistic score. With the objective of developing a cereal bar replacing oats with PSF, the bars CB-2 and CB-5 were compared to the conventional bar CB-1. The cereal bars CB-2 and CB-5 showed an increase in crude protein (87.5% and 62.5%) and in dietary fiber (77% and 44%), respectively. These results allowed the classification of CB-2 and CB-5 as fiber sources; they can, therefore, be classified as light products according to the Brazilian legislation.

Production, solubility and antioxidant activity of curcumin nanosuspension

Curcumin is a powerful bioactive agent and natural antioxidant, but it is practically water-insoluble and has low bioavailability; a possible solution to this obstacle would be formulations of curcumin nanoparticles. Surfactants such as tween 80 can be used to stabilize low-solubility molecules preventing particle aggregation. The objectives of this study were the preparation of a suspension with curcumin nanoparticles in tween 80, the testing of pure curcumin solubility and of a simple mixture of curcumin with tween 80 and nanosuspension in water and ethanol as solvents, and finally the assessment of the antioxidant activity. We prepared the nanosuspension by injecting a curcumin solution in dichloromethane at low flow in water with tween 80 under heating and ultrasound. The analysis of particles size was conducted through dynamic light scattering; the non-degradation of curcumin was verified through thin-layer chromatography. The analyses of antioxidant activity were carried out according to the DPPH method. The method applied to reduce the particles size was efficient. Both the curcumin suspension and nanosuspension in tween 80 increased its solubility. Curcumin and the formulations presented antioxidant activity.

Cajá-flavored drinks: a proposal for mixed flavor beverages and a study of the consumer profile

Mixed flavor beverages represent a trend that is gaining the allegiance of potential fruit juice consumers. The present study proposed to prepare mixed flavor beverages and verify their consumer acceptance. Cajá beverage (sample A) was used as the standard. The other beverages were prepared by mixing the cajá-flavored product with other flavors: strawberry (B), pineapple (C), jabuticaba (D), mango (E) and cashew (F). The consumer profiles in the two regions studied were similar. Overall beverages B, A and F were the most accepted, with scores of 7.7, 6.4 and 6.2, respectively. Internal Preference Mapping showed that most of the consumers were located near beverages A, B and F, confirming the acceptance results. The consumers indicated appearance and flavor as the most appreciated characteristics in beverages A, B and F. Beverages A, B and F presented higher total soluble solids contents and viscosities than the other beverages. Consumer segmentation did not depend on the different levels of familiarity with the cajá flavor. Thus the preparation of mixed flavor beverages of cajá-strawberry and cajá-cashew is an excellent proposal because it presents flavors with good potential for marketing in different regions of Brazil.

Exploring two cases of Piano Teacher Education in Finland and Germany

Research about music instrument teacher education is scattered and fairly recent, especially in the European context. The purpose of this study was to explore two cases of piano teacher education programs at higher music education institutions, one in Finland, and one in Germany, to gain insights into the preparation of piano teachers for their professional working life. The aim was to identify issues for consideration in curriculum development of piano teacher education to enhance the teaching and learning of piano playing, and to ultimately increase musical practice and engagement among young learners. Nine semi-structured interviews with piano teacher educators, heads of program, other lecturers within the program, and student piano teachers in both cases were analyzed using applied thematic analysis. Three main themes with subcategories emerged: (1) the organization of the piano teacher education program, such as the structure, the content, the learning environments provided, and the development mechanisms of the program; (2) the views on the piano teacher profession, the working environment and resulting requirements, including further education during professional life; and (3) the professional skills and teacher identity development of student teachers. While the supposed working environments and requirements of future piano teachers, the student teachers' development characteristics, and the content were found reasonably concurrent in both cases, the structure of the teacher education program, and the organization of learning environments presented notable differences. While the complete teacher qualification in the Finnish case was offered as option in the Bachelor and Master of Music program within the piano department, the German case offered a separate program for music instrument educators. Other main differences concerned the organizations of practical teaching experiences, and the linking of practical with theoretical pedagogy. Conviction and enthusiasm for improving piano and other music instrument teacher education seemed remarkable. These improvements could include the development of a comprehensive teacher education pedagogy for music instrument teacher educators, intensified cross-linking within and of higher music education institutions in local contexts, and the expansion of professional development opportunities.

Investigations towards the synthesis of isotope labelled analogues of tocopherols and tocotrienols /

Vitamin E is considered as the most effective lipophilic chain breaking antioxidant. a-Tocopherol and its analogues have been studied thoroughly with regards to its biokinetics and bioavailabily. Deuterated tocopherols have been synthesized and utilized in such studies. Tocotrienols are arousing more and more interest because of their high efficiency as antioxidants. However, to date, there is no effective synthetic method reported for deuterated tocotrienols. This thesis is focused on the investigation of the synthetic methods of deuterated tocotrienols and their analogues: 5-trideuteromethyl-a-tocotrienol, 5- trideuteromethyl-p-tocotrienol, tocotrienol acetate, silyl tocotrienol ether, etc. Several synthetic procedures for the preparation of poly-deuterated tocopherols are known. Mainly the deuterium is introduced by use of labelled formaldehyde and deuterated hydrogen chloride under Lewis acid catalysis. However, these methods are not effective in tocotrienols due to exchange of protons for deuterium at other sites under the acidic conditions. We developed several different approaches to generate polydeuterated tocotrienols by using both morpholinomethylation followed by reduction with NaCNBDs as deuterated reducing reagents and transmetalation strategy. The 5-trideuteromethyl-a-tocotrienol was finally obtained in a satisfactory yield of 60%. In addition, this thesis also discussed the study of structural comparison and the chemical property difference of tocopherols and tocotrienols, which provides hints to explain the reactivity difference of them towards oxidation at the C3-C4 positions.Furthermore, the methodology of halogenation and dehydrohalogenation of tocotrienol was explored to prepare a hexaene tocotrienol derivative as a florescent reporter of tocopherol.

Synthesis of Chiral Benzimidazolylidenes from 1,10-Phenathrolines and 1,10-Phenathroline-2,9-dione /

A^-heterocyclic carbenes (NHCs) have become the focus of much interest as ancillary ligands for transition metal catalysts in recent years. Their structural variability and strong cy-donation properties have led to the preparation of demonstrably useful organometallic catalysts. Among the three general structural types of NHCs (imidazolylidenes, imidazolinylidenes, and benzimidazolylidenes), benzimidazolylidenes are the least investigated because of the limitation of current synthetic approaches. The preparation of chiral analogues is even more challenging. Previously, our group has demonstrated an alternative approach to synthesizing benzimidazolylidenes with a tetracyclic framework in three steps from 1,10-phenanthroline. This thesis is focused on approaches to chiral benzimidazolylidenes derived from substituted 1,10-phenanthrolines. A key step in the preparation of these ligands involves a reduction of the pyridyl rings in 1,10-phenanthrolines. Chirality can be introduced to phenanthrolines before, during, or after the reduction as illustrated by three approaches: 1) de novo construction of the phenanthroline from chiral ketones with endo and exo faces to provide a degree of diastereoselectivity during subsequent reduction; 2) introduction of substituents into the 2- and 2,9- position of phenanthroline by nucleophilic aromatic substitution, followed by a reduction-resolution sequence; and 3) use of the protected octahydrophenanthroline as a substrate for chiral induction a to nitrogen.

Some aspects of the chemistry of Reissert compounds / |nDurga Prasad Aysola. -- 260 St. Catharines [Ont. : s. n.],

1-(0- and m-Ohlorobenzoyl)isoquinolines have been synthesized by two routes involving Reissert compounds. One route involves condensation of 2-benzoyl-l,2-dihydroisoquinaldonitrile with the appropriate chlorobenzaldehyde and the second involves rearrangement of the appropriate Z-(chlorobenzoyl)-l,Z-dihydroisoquinaldonitrile under basic conditions. The action of potassamide in anhydrous liquid ammonia on both ketones gave unexpectedly N-(l-isoquinolyl)benzamide (67) as the major product and the use of dibenzo-18-crown-6-ether 98% substantially improved the yd..e.ld in the case of l-chloroketone. This amide (67) exhibits unusual hydrogen bonding. 1-(o-chlorobenzoyl)-6,7-dimethoxyisoquinoline (79) was prepared in very s,amll quantities by the route involving condensation of 2-benzoyll, Z-dihydro-6,7-dimethoxyisoquinaldonitrile with o-chlorobenzaldehyde. The poor yields are due to the instability of the anion of 2-benzoyl1, Z-dihydro-6,7-dimethoxyisoquinaldonitrile. Attempted preparation of the ketone (79) by rearrangement of 2-(o-chlorobenzoyl)-l,2-dihydro6,7- dimethoxyisoquinaldonitrile under basic conditions yielded the start~ng material (Reissert compound) and 6,7-dimethoxyisoquinoline. The action of potassamide in anhydrous liquid ammonia on l-(o-bromo-4,5-dimethoxybenzoyl)isoquinoline (85), which was prepared by the route involving the condensation of 2-benzoyl-l,4-dihydroisoquinaldonitrile with o-bromo-4,5-dimethoxybenzaldehyde, gave two products, which have not yet been identified. The ketone (85) and its precursors are interest~ng in that their 20 eV and 70 eV mass spectra do not show molecular ions.

Some aspects of the chemistry of 1, 3, 4 - Thiadiazolium salts and related compounds

The work described in this thesis has been divided into seven sections. The first section involves the preparation of N'-acyl-N'-arylN- benzothiohydrazides by the acylation of N'-aryl-N-benzothiohydrazides and is followed by a brief discussion of their possible conformation in solution. The second section deals with the preparation of 1,3,4-thiadiazolium salts by the action of perchloric acid/acetic anhydride on N'-acylN'- aryl-N-benzothiohydrazides and also by the reaction of N'-arylN- benzothiohydrazides with nitriles in an acidic medium. The preparation of 2-methylthio-I,3,4-thiadiazolium methosulfate by methylating the corresponding thione is also described. The third section deals with the reaction of 2-phenyl- and 2-methyl-I,3,4-thiadiazolium salts with alcohols in the presence of base. The stability and spectra of these compounds are discussed. Treatment of the 2-methyl-I,3,4-thiadiazolium salt with base was found to give rise to a dimeric anhydrobase and evidence supporting its structure is given. The anhydrobase could be trapped by a variety of acylating and thioacylating agents before dimerization occurred. In the fourth section, the reaction of N'-acyl-N'-aryl-N-benzothiohydrazides with a variety of acid anhydrides is described. These compounds were found to be identical with those obtained by acylating the anhydrobase. The mass spectral fragmentation of these compounds is described and the anomolous product obtained upon thiobenzoylation of 3-methyl-l-phenyl-pyrazal-5-one is also discussed. The fifth section deals with thioacyl derivatives of the anhydrobase which were prepared by the action of phosphorus pentasulfide upon the oxygen analogues and also obtained as the major product of the reaction of thioacetic acid with compounds related to N'-aryl-N-benzothiohydrazides. The mass spectra and p.m.r. spectra of these compounds are discussed. In the sixth section, the reaction of the 2-methylthio-l,3,4- thiadiazolium salt with active methylene compounds to give acyl and diacyl derivatives of the anhydrobase is described. Some aspects of these compounds are discussed. The seventh section describes the synthesis of ncyanine~' type dyes incorporating the l,3,4-thiadiazole ring and their spectra are briefly discussed.