Marcos estratigraficos regionais na Formacao Palermo: caracterizacao dos picos radioativos

During a basinal scale study on Palermo Formation (Upper Permian, Parana Basin) high elevated Gamma Ray picks were identified mainly in the lower third of that stratigraphic unit. Those Gamma Ray signatures have been used as good regional stratigraphic markers. From them it was possible one chronostratigraphic analysis of Palermo Formation as pointed out by previous papers (Perinotto). Potassium40 is the responsible for the high Gamma Ray picks in the Palermo Formation. -from English summary

Argilominerais de Coberturas Sedimentares Cenozóicas do Centro-leste do Estado de São Paulo

Clay mineral analysis contributed to the mineralogical characterization and stratigraphic setting of continental Cenozoic deposits of central-eastern portion of São Paulo State, southeastern Brazil. These deposits, often thin and discontinuous, comprise the Itaqueri Formation (Cretaceous-Paleogene), Rio Claro Formation (Pliocene) and associated Neocenozoic deposits. X-ray diffractometry provided mineralogical and semiquantitative constitution of clays, while scanning electron microscopy (SEM) provided details about mineralogical constitution, packing of microscopic grains and nature (detrital or diagenetic) of clays. These results supported interpretations about paleoenvironmental conditions during sedimentation, revealing possible links between changing climates (dry or humid) and correlative Cenozoic deposits in southeastern Brazil. In addition, SEM images showed microstructures which influence on geotechnical behaviour (erosion and collapse phenomena) of sedimentary materials.

Seqüência Ordovício-Siluriana e Devoniana no Flanco Norte da Bacia do Paraná

Two stratigraphic sequences characterize the basal units of the Paraná basin. The Ordovician-Silurian sequence overlie directly the Neoproterozoic basement and consists of a 55m-thick unit of coarse-grained sandstones, diamictites, fossiliferous shales and fine-grained micaceous sandstones. The Alto Garças Formation constitutes the base of the sequence and is made of coarse-grained, massive and reddish sandstones associated with conglomeratic lenses. Diamictites with pebbles of diverse composition in siltic and arenaceous matrix were deposited during the Ordovician-Silurian glaciation. Whenever the basal sandstones are absent, the diamictites directly overlie the basement. The diamictites were previously included in the Vila Maria Formation. However our study revealed that they are part of the Iapó Formation. A transgressive event following the glaciation is marked by the deposition of the Vila Maria Formation, which is characterized by fossiliferous (mollusks, brachiopods, cryptospores and microplankton) and laminated shales and siltstones, grading upward to fine-grained micaceous sandstones with hummocky cross stratification. Layers containing trace fossils (Anthrophycus) occur at the transition between the siltstones and the sandstones. The Devonian sequence is represented by 80-170 meters thick sandstones of the Furnas Formation (lower unit) and a sucession of sandstones, siltstones and shales of the Ponta Grossa Formation (upper unit). Unlike other areas of the Paraná Basin, the Ponta Grossa Formation is characterized by coarsening-upward succession beginning with fine sandstones and grading upward to coarse and very-coarse sandstone beds. Cretaceous modifying tectonics affected the Paleozoic sequences, which are cut by a series of faults, in some cases showing displacements greater than 500 meters.

The Bauru Group: A continental Cretaceous unit in Brazil - Concepts based on micropaleontological, oxygen isotope and stratigraphical data

The integration of outcrop and subsurface information, including micropaleontological data, facies and sequence stratigraphic studies, and oxygen isotope analysis, allow us to present a new stratigraphic model for the Cretaceous continental deposits of the Bauru Group, Brazil. Thirty-eight fossil taxa were recovered from these deposits, including 29 species of ostracodes and 9 species of charophytes. Seven of these ostracode species and three subspecies are new and formally described here. The associations of Chara barbosai - Ilyocypris cf. riograndensis, found in the Adamantina Formation, and Amblyochara sp. - Neuquenocypris minor mineira nov. subsp., found in the Marília Formation. Ponte Alta Member, represent two distinct groups that are respectively Turonian-Santonian and Maastrichtian (probably Late Maastrichtian) in age. Therefore, a hiatus, encompassing more than 11 Ma, separates those two formations. From bottom to top, four depositional cycles were recognized in the Bauru Group in western São Paulo: cycles 1 and 2 belong to Caiuá Formation (fluvio-lacustrine and lacustrine deposits in the Presidente Prudente region), cycle 3 to the Santo Anastácio and lower Adamantina Formation (respectively fluvial and lacustrine deposits), and cycle 4 to the upper Adamantina Formation (fluvio-lacustrine facies). An erosional unconformity separates the Caiuá and Santo Anastácio Formations (between cycles 2 and 3). The Marília Formation is a distinct unit from the underlying succession; it does not occur in western São Paulo, but is found in restricted areas of São Paulo, Minas Gerais, Mato Grosso do Sul and Goiás States. During the deposition of the Bauru Group (Aptian? to Maastrichtian) the climate was hot and arid-semiarid. Shallow lakes underwent fluctuations in expansion (wet phases) and contraction (dry phases), as well as variations in salinity. During the deposition of the Adamantina Formation (Turonian-Santonian) there were long, dry periods that caused segmentation of large lakes (due to topographic irregularities in the basaltic substrate) and sometimes exposures of the lake floors; when flooded these lake floors were colonized by extensive meadows of single species of charophytes. Small ephemeral ponds, that were hydrochemically unstable and colonized by multiple species of charophytes, were the depositional sites for the marls and mudstones of Ponte Alta Member (Maastrichtian, Late Maastrichtian?). Our micropaleontological age control, combined with the Late Cretaceous ages of volcanic ashes found in the southeastern Brazil coastal basins, and the stratigraphic position of analcimites from the Jaboticabal-SP region, suggest a Late Coniacian-Santonian age for important magmatic events occurred in the interior of Brazil (north-central São Paulo State, Triângulo Mineiro, and southwestern Goiás State).

Recognition of Cretaceous, Paleocene, and Neogene tectonic reactivation through apatite fission-track analysis in Precambrian areas of southeast Brazil: Association with the opening of the south Atlantic Ocean

Apatite fission-track analysis was used for the determination of thermal histories and ages in Precambrian areas of southeast Brazil. Together with geological and geomorphologic information, these ages enable us to quantify the thermal histories and timing of Mesozoic and Cenozoic epirogenic and tectonic processes. The collected samples are from different geomorphologic blocks: the high Mantiqueira mountain range (HMMR) with altitude above 1000 m, the low Mantiqueira mountain range (LMMR) under 1000 m, the Serra do Mar mountain range (SMMR), the Jundiá and Atlantic Plateaus, and the coastline, all of which have distinct thermal histories. During the Aptian (∼120 Ma), there was an uplift of the HMMR, coincident with opening of the south Atlantic Ocean. Its thermal history indicates heating (from ∼60 to∼80 °C) until the Paleocene, when rocks currently exposed in the LMMR reached temperatures of ∼100 °C. In this period, the Serra do Mar rift system and the Japi erosion surface were formed. The relief records the latter. During the Late Cretaceous, the SMMR was uplifted and probably linked to its origin; in the Tertiary, it experienced heating from ∼60 to ∼90 °C, then cooling that extends to the present. The SMMR, LMMR, and HMMR were reactivated mainly in the Paleocene, and the coastline during the Paleogene. These processes are reflected in the sedimentary sequences and discordances of the interior and continental margin basins. © 2002 Elsevier Science Ltd. All rights reserved.

Estratigrafia de seqüências das formações Taciba e Rio Bonito (Membro Triunfo) na região de Mafra/SC, leste da Bacia do Paraná

The Taciba and Rio Bonito (lower Triunfo Mbr) formations are divided into six depositional sequences based on cores, gamma-ray and electrical logs from shallow drillings from northern Santa Catarina State, Each sequence is formed by two systems tracts, a lower one, sandy (lowstand) and an upper one, shaly (highstand). The Taciba Formation has three sequences, S 0 to S 0 sequence S 0 has a thick turbidite sandstone at the base (Rio Segredo Member) that pinches out towards the eastern margin and even disappears in the Mafra outcrop area. Sequence S 1 varies from a thin fluvial-estuarine system to a thick turbidite sandstone of a channelized fan system; S 1 upper shaly system tract is marine in well PP-11, and it is glacially-influenced in well PP-10. Sequence S 2 is a thick sand-stone body of shallow marine origin, but restricted to one well (PP-11); its upper shaly tract is dominated by massive siltstones intercalated with thin, distal tempestites. The lower Triunfo Member (or Taciba-Triunfo transition) begins with the arrival of deltaic clastics of sequence S 3 lower tract, coarsening-up from medial- to proximal delta front sandstones. Sequence S 4 is quite similar to S 3, both showing sand-stone progradation from north to south, as opposed to the southwest-sourced transgressive diamictites. Sequence S 5 consists of fluvial deposits at well PP-12, and two transgressive cycles from wells PP-11 to PP-9, each one of them composed of fluvial-estuarine to marine systems. Well PP-10 is an exception, where the lower cycle presents deglaciation to marine deposits.

Investigação de Intrusão de Água Salgada em Aqüífero Superficial a Partir de Medidas de Resistividade Elétrica

A site investigation program was carried out to detect salt-water intrusions in a shallow sedimentary aquifer based on electrical resistivity measurements. The site is located close to Paranaguá harbor, in the Paraná State, Brasil. At this site, high chloride concentration contaminated shallow water wells used to supply water for local industries. The site investigation program included a fieldwork, dipole-dipole electrical profiling, resistivity piezocone tests, physical-chemical analysis of sampled water and interpretation of borehole logs. The resistivity piezocone tests provided two simultaneous information; the soil stratigraphy at a very detailed level and a quasi-continuous resistivity profile. Both information adequately complemented dipole-dipole electrical profiling test data. The integration of all test data allowed identifying the contaminated areas as well as guided the location of new water wells to be installed in this area.

A seqüência mafra superior \ Rio Do Sul inferior (Grupo itararé, permocarbonífero) em sondagens testemunhadas da região de mafra (SC), Margem Leste da Bacia do Paraná

The Permo-Carboniferous Harare Group crops out in the Matra area, represented by Campo do Tenente, Mafra and Rio do Sul formations; they correspond in subsurface to Lagoa Azul, Campo Mourão and Tacïba formations. A composite sampling of the Group was performed through drilling of six wells, which average 60 m in depth; three of them cored the depositional sequence here designated as Upper Mafra\Lower Rio do Sul. The Upper Mafra Formation were sampled by TC-4 and BR-5 wells, and it consists of three units: the lower two are sandy, glacial-deltaic and fluvial-deltaic in origin, corresponding to a lowstand tract. The last unit is composed of two dirtying-upward successions of sandstone, diamictite and rhythmite, interpreted as deglaciation/transgressive events, and well represented in BR-5 drilling. The Lower-Rio do Sul Formation (Lontras Shale) is formed by two marine units: the lower one is represented by shale and bioturbated siltstone which culminate the previous deglaciation, transgressive succession, while the upper one, sampled by SL-2 well, is formed by shale and thin, turbidite sandstone, attributed to a highstand tract.

Determinação da distribuição de um nível de turbidito na formação Macaé no campo de Namorado através de uso de atributos sísmicos

This study was developed on the basis of petrophysics characterization, 3D seismic interpretation, and rock-wire-log integration. The results were integrated with amplitude attribute through cross plot (rock attribute x amplitude value). 3D seismic data also allowed inteipreting the top of Lagoa Feia, Macaé, and Carapebus formations, and Outeiro Member. The analyses of the maps of structures and attributes, integrated with wire-log data, suggest that Namorado turbidite level is candidate to be mapped with stratigraphic attributes like AverageTroughAmplitude, RMS velocity and Total AbsoluteAmplitude. Lagoa Feia Formation attribute maps (Dip-Azimuth and TotalEnergy) allows to interpret a low fault density at the carbonate coquina level in the Namorado field. This level is also considered one at the best seismic reflector and an important reservoir of the Campos Basin.

Sucessão sedimentar do Grupo Bauru na região de Pirapozinho (SP)

There is yet enthusiastic debate in the literature about the environmental conditions that originated the Cretaceous deposits of the Bauru Group, despite many authors accept that arid climatic conditions widely dominant at the base, evolved to chiefly fluvial-lacustrine conditions at the intermediate portion, and to arid conditions again at the top of the unit. The Bauru Group covers an area of about 117.000 km 2 of the Paraná Basin in São Paulo State territory. Core samples of this lithostratigraphic unit collected from a drill hole at Pirapozinho (Southwest of the São Paulo State) are described and together with well log data brought new information that do not agree with the described model. It was identified in this well the Caiuá, Pirapozinho, Santo Anastácio, Araçatuba and Adamantina formations. The study of these core samples clearly showed the dominance of hydrodynamic sedimentary structures and high to medium intensity of bioturbation in whole profile. These characteristics observed in core samples and compared to patterns of geophysical logs testify the dominance of fluvial processes in the Bauru Group deposition at the studied area. These new data suggests that the paleo-environmental evolution of the unit was much more complex, showing strong lateral and vertical changes that diverges from the model more widely accepted in the literature.

Ciclos e seqüências deposicionais das formações Rio da Batateira e Santana (Andar Alagoas), Bacia do Araripe, Brasil

The Rio da Batateira e Santana formations, the latter with Crato, Ipubi and Romualdo members (Alagoas Stage, Aptian), were studied in four cored and logged wells from the eastern portion of Araripe Basin, Northeastern Brazil. The investigated section is 230 m-thick, and PS-14 well is the most representative, because it is the only one which sampled the evaporites of Ipubi Member. Nine facies cycles were identified, being formed by siliciclastics (estuarine, deltaic and lacustrine), mixed lithologies (lacustrine), carbonates, black shales and marls (lacustrine), and gypsum-anhydrite (lacustrine evaporite). The ordering of facies cycles furnished six depositional sequences. They were formed by siliciclastic, regressive-transgressive R-T cycles (S1 and S4, corresponding to Rio da Batateira Formation and to Santana Formation/Romualdo Member), by siliciclastics and carbonates, R-T cycles (S2, S3.1 and S3.2, corresponding to Crato Member), and by siliciclastic-carbonate, R-T cycles followed by evaporitic cycles (S3.3, referred to Ipubi Member). The last cycles correspond to concentration-dilution, C-D cycles of marine brines, which precipitated gypsum in the restricted lacustrine basin.

Facies sedimentares e ambientes deposicionais da Formação Barbalha no vale do cariri, bacia do araripe, nordeste do Brasil

The Aptian Barbalha Formation represents the first unit of the post-rift sequence of the Araripe Basin and crops out at the slopes of the Aranpe plateau in the eastern part ot Aranpe Basin. The unit has also been named Kio da Batateira Formation, but this name is here used in its original definition as Batateira Beds, an interval of great lateral continuity and characterized by the presence of bituminous shales of the Alagoas Stage (P-270 palynological biozone). This paper presents the results of a stratigraphic analysis carried out along the outcrop belt in order to establish the facies architecture and to interpret deposicional environments of the siliciclastic Barbalha Formation. Detailed stratigraphic vertical sections were measured and correlated. They allowed the recognition of two depositional sequences characterized by fining upward arrangement of facies, beginning with fluvial deposits and ending with lacustrine deposits at their tops. The end of the first cycle is represented by black shales and brecciated limestones of the Batateira Beds that record a geologic event of regional magnitude and serve as meaningful long-distance stratigraphic mark. The second deposicional sequence overlies disconformably the Batateira Beds and begins with clast-supported conglomerates, which are covered by a succession of fluvial sandstones and minor intervals of pelitic rocks. The sandstone content diminishes towards the top and the upper part of the unit is characterized by the presence of ostracode-rich green shales. The Barbalha Formation is conformably overlaid by Late Aptian lacustrine limestones belonging to the Crato Member of the Santana Formation.

Metacryphaeus rotundatus, um novo elemento da fauna de trilobites calmoniidae (phacopida), da formação Ponta Grossa (Devoniano), bacia do Paraná, Brasil

Calmoniids (Delo, 1935) are the most common and abundant group of trilobites of the fossil record of the Devonian Ponta Grossa Formation in the Apucarana sub-basin. Although known since the past century, the study of calmoniids has been taxonomically and stratigraphically biased. This is because some authors centered their studies on some particular genera from a few stratigraphic horizons within the basal portion of the Ponta Grossa Formation. The analyses of 398 specimens of calmoniid trilobites of the rocks of Jaguariaiva Member of the Ponta Grossa Formation, mainly from Tibagi county in the state of Paraná, Brazil, indicate the presence of specimens that are referable to Metacryphaeus rotundatus (Kozlowski, 1923). This is the first record of M. rotundatus in Brazilian Devonian rocks. Metacryphaeus rotundatus is a conspicuous species of the Emsian rocks of the Icla Formation, Bolivia. Although the affinities of the trilobite fauna of the Devonian Paraná Basin, in the context of the Malvinokaffric realm, are with the Brazilian and South Africa provinces, this finding is in accordance with new evidence (e.g., conulariids, homalonotids trilobites), indicating the presence of cosmopolitan species with Andean affinities. Metacryphaeus rotundatus lived in a broad paleoclimatic range, from a temperate, cold temperate to a subpolar climate. Finally, in the Devonian of the Paraná Basin, M. rotundatus lived and were preserved in muddy, organic rich bottoms, deposited in offshore waters, below the storm wave base, associated to marine flooding surfaces.

Caracterização das falhas de transferência na porção norte da Bacia de Santos a partir da integração de dados geológicos e geofísicos

Structures transverse/sub-transverse to the shoreline have been identified and characterized on the precambrian basement outcrop on the continent adjacent to the northern Santos Basin. These structures were analyzed from images of digital elevation model SRTM 90m by extracting NW-SE lineaments that intersect the NE-SW foliation. The lineaments were selected, classified into 48 segments that extend toward offshore, and correlated with basin structures. In the basin 25 2D seismic sections, 12 well logs and data from potential methods were interpreted, identifying the key stratigraphic levels and the major structures. Structural maps of each horizon were generated. Six transfer faults (FTs) were recognized and named FT-1 to FT-6, whose extensions correspond to continental lineaments named FC1 to FC6. The FTs are related to the basin deformation and evolution. In seismic sections, these faults have lateral slip in flower structures, displacement inversions from normal at the top to reverse at the base, abrupt changes in thickness or even disappearance of the seismic reflectors. The structural map of the Basement and Top of the Rift shows control of some depocenters by faults and displacements in some areas. The maps of potential methods indicate that there are pronounced anomaly shifts in some areas, associated with FTs. Some seismic sections indicate reactivation of FTs when they intersect horizons from the basement until the most recent layers. The 3D integration of data facilitated the observation of the FT extensions in the continent discontinuity.

Biotic interaction between spionid polychaetes and bouchardiid brachiopods: Paleoecological, taphonomic and evolutionary implications

Shells of Bouchardia rosea (Brachiopoda, Rhynchonelliformea) are abundant in Late Holocene death assemblages of the Ubatuba Bight, Brazil, SW Atlantic. This genus is also known from multiple localities in the Cenozoic fossil record of South America. A total of 1211 valves of B. rosea, 2086 shells of sympatric bivalve mollusks (14 nearshore localities ranging in depth from 0 to 30 m), 80 shells of Bouchardia zitteli, San Julián Formation, Paleogene, Argentina, and 135 shells of Bouchardia transplatina, Camacho Formation, Neogene, Uruguay were examined for bioerosion traces. All examined bouchardiid shells represent shallow-water, subtropical marine settings. Out of 1211 brachiopod shells of B. rosea, 1201 represent dead individuals. A total of 149 dead specimens displayed polychaete traces (Caulostrepsis). Live polychaetes were found inside Caulostrepsis borings in 10 life-collected brachiopods, indicating a syn-vivo interaction (Caulostrepsis traces in dead shells of B. rosea were always empty). The long and coiled peristomial palps, large chaetae on both sides of the 5th segment, and flanged pygidium found in the polychaetes are characteristic of the polychaete genus Polydora (Spionidae). The fact that 100% of the Caulostrepsis found in living brachiopods were still inhabited by the trace-making spionids, whereas none was found in dead hosts, implies active biotic interaction between the two living organisms rather than colonization of dead brachiopod shells. The absence of blisters, the lack of valve/site stereotypy, and the fact that tubes open only externally are all suggestive of a commensal relationship. These data document a new host group (bouchardiid rhynchonelliform brachiopods) with which spionids can interact (interestingly, spionid-infested sympatric bivalves have not been found in the study area despite extensive sampling). The syn-vivo interaction indicates that substantial bioerosion may occur when the host is alive. Thus, the presence of such bioerosion traces on fossil shells need not imply a prolonged post-mortem exposure of shells on the sea floor. Also, none of the Paleogene and Neogene Bouchardia species included any ichnological evidence for spionid infestation. This indicates that the Spionidae/ Bouchardia association may be geologically young, although the lack of older records may also reflect limited sampling and/or taphonomic biases.