De Nonii Marcelli locis Plautinis : part. I.

Thesis (doctoral)--Universitate Gryphiswaldensi.

Petrographic methods, the authorized English translation of Part I, Anleitung zum gebrauch des polarisationsmikroskops (3d rev. ed.) and Part II, Die gesteinsbildenden mineralien (2d rev. ed.)

Mode of access: Internet.

The English malady, or, A treatise of nervous diseases of all kinds : as spleen, vapours, lowness of spirits, hypochondriacal, and hysterical distempers, &c., in three parts: Part I. Of the nature and cause of nervous distempers : Part II. Of the cure of nervous distempers : Part III. Variety of cases that illustrate and confirm the method of cure : with the author's own case at large /

Each part has special title page.

A compendious system of anatomy : In six parts. Part I. Osteology. II. Of the muscles, &c. III. Of the abdomen. Part IV. Of the thorax. V. Of the brain and nerves. VI. Of the senses. From the Encyclopaedia. Illustrated with twelve large copperplates.

Austin

Organization, correspondence, transportation. Part I: Business organization,

Series title also on t.-p.

Phobic anxiety in 11 nations: Part I: Dimensional constancy of the five-factor model

The Fear Survey Schedule-III (FSS-III) was administered to a total of 5491 students in Australia, East Germany, Great Britain, Greece, Guatemala, Hungary, Italy, Japan, Spain, Sweden, and Venezuela, and submitted to the multiple group method of confirmatory analysis (MGM) in order to determine the cross-national dimensional constancy of the five-factor model of self-assessed fears originally established in Dutch, British, and Canadian samples. The model comprises fears of bodily injury-illness-death, agoraphobic fears, social fears, fears of sexual and aggressive scenes, and harmless animals fears. Close correspondence between the factors was demonstrated across national samples. In each country, the corresponding scales were internally consistent, were intercorrelated at magnitudes comparable to those yielded in the original samples, and yielded (in 93% of the total number of 55 comparisons) sex differences in line with the usual finding (higher scores for females). In each country, the relatively largest sex differences were obtained on harmless animals fears. The organization of self-assessed fears is sufficiently similar across nations to warrant the use of the same weight matrix (scoring key) for the FSS-III in the different countries and to make cross-national comparisons feasible. This opens the way to further studies that attempt to predict (on an a priori basis) cross-national variations in fear levels with dimensions of national cultures. (C) 2002 Elsevier Science Ltd. All rights reserved.

Jazz Innovations Series Part I November 20, 2013

Concert Program

Jazz Innovations Series Part I February 18, 2015

Concert Program

Modelling of froth transportation in industrial flotation cells: Part I. Development of froth transportation models for attached particles

Modelling of froth transportation, as part of modelling of froth recovery, provides a scale-up procedure for flotation cell design. It can also assist in improving control of flotation operation. Mathematical models of froth velocity on the surface and froth residence time distribution in a cylindrical tank flotation cell are proposed, based on mass balance principle of the air entering the froth. The models take into account factors such as cell size, concentrate launder configuration, use of a froth crowder, cell operating conditions including froth height and air rate, and bubble bursting on the surface. (C) 2004 Elsevier Ltd. All rights reserved.

Geometric distortion in clinical MRI systems - Part I: evaluation using a 3D phantom

Recently, a 3D phantom that can provide a comprehensive and accurate measurement of the geometric distortion in MRI has been developed. Using this phantom, a full assessment of the geometric distortion in a number of clinical MRI systems (GE and Siemens) has been carried out and detailed results are presented in this paper. As expected, the main source of geometric distortion in modern superconducting MRI systems arises from the gradient field nonlinearity. Significantly large distortions with maximum absolute geometric errors ranged between 10 and 25 mm within a volume of 240 x 240 x 240 mm(3) were observed when imaging with the new generation of gradient systems that employs shorter coils. By comparison, the geometric distortion was much less in the older-generation gradient systems. With the vendor's correction method, the geometric distortion measured was significantly reduced but only within the plane in which these 2D correction methods were applied. Distortion along the axis normal to the plane was, as expected, virtually unchanged. Two-dimensional correction methods are a convenient approach and in principle they are the only methods that can be applied to correct geometric distortion in a single slice or in multiple noncontiguous slices. However, these methods only provide an incomplete solution to the problem and their value can be significantly reduced if the distortion along the normal of the correction plane is not small. (C) 2004 Elsevier Inc. All rights reserved.

Optimization of co-current spray drying process of sugar-rich foods. Part I - Moisture and glass transition temperature profile during drying

A steady state mathematical model for co-current spray drying was developed for sugar-rich foods with the application of the glass transition temperature concept. Maltodextrin-sucrose solution was used as a sugar-rich food model. The model included mass, heat and momentum balances for a single droplet drying as well as temperature and humidity profile of the drying medium. A log-normal volume distribution of the droplets was generated at the exit of the rotary atomizer. This generation created a certain number of bins to form a system of non-linear first-order differential equations as a function of the axial distance of the drying chamber. The model was used to calculate the changes of droplet diameter, density, temperature, moisture content and velocity in association with the change of air properties along the axial distance. The difference between the outlet air temperature and the glass transition temperature of the final products (AT) was considered as an indicator of stickiness of the particles in spray drying process. The calculated and experimental AT values were close, indicating successful validation of the model. (c) 2004 Elsevier Ltd. All rights reserved.

Edge-to-edge matching and its applications - Part I. Application to the simple HCP/BCC system

The edge-to-edge matching crystallographic model has been used to predict all the orientation relationships (OR) between crystals that have simple hexagonal close packed (HCP) and body-centered cubic (BCC) structures. Using the critical values for the interatomic spacing misfit along the matching directions and the cl-value mismatch between matching planes, the model predicted all the four common ORs, namely the Burgers OR, the Potter OR, the Pitsch-Schrader OR and the Rong Dunlop OR, together with the corresponding habit planes. Taking the c(H)/a(H) and a(H)/a(B) ratios as variables, where H and B denote the HCP and BCC structures respectively, the model also predicted the relationship between these variables and the four ORs. These predictions are perfectly consistent with the published experimental results. As was the case in the FCC/BCC system, the edge-to-edge matching model has been shown to be a powerful tool for predicting the crystallographic features of diffusion-controlled phase transformations. (C) 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Mechanistic modelling of pilling. Part I: Detailing of mechanisms

Mechanistic models of pilling are discussed in general terms, and a framework for pilling simulations is thereby created. A fundamental flaw in earlier models of pilling is revealed. A more comprehensive model of fibre diffusion and withdrawal from the fabric is proposed, and this is solved in general terms to find the rate of fuzz growth. Fuzz wear-off and entanglement into pills are discussed. Fibre fatigue is introduced, and it is demonstrated that this potentially increases the rate of withdrawal of anchor fibres.

Erosion-corrosion of mild steel in hot caustic. Part I: NaOH solution

A novel apparatus, high-pressure/high-temperature nickel flow loop, was constructed to study the effect of the flow on the rate of erosion-corrosion of mild steel in hot caustic. It has been successfully used to measure the corrosion rate of 1020 steel in 2.75 M NaOH solution at a temperature of 160 degrees C and velocities of 0.32 and 2.5 m/s. In situ electrochemical methods were used to measure the corrosion rate such as the potentiodynamic sweep, the polarization resistance method, and electrochemical impedance spectroscopy (EIS). Also used were the weight-loss method and scanning electron microscopy (SEM). Eight electrodes/coupons were used to monitor the metal loss rate, four were placed at the low velocity section, while the other four were placed in the high velocity section. The first three coupons in each section were placed within the disturbed flow region, while the fourth was placed in a fully developed flow region. The corrosion rate of the coupons in the high velocity section was generally higher than that of the coupons in the low velocity section. One coupon in the disturbed flow region had a significantly higher corrosion rate than the others. (c) 2005 Elsevier Ltd. All rights reserved.