Stratigraphy and Paleontology of the Eagle Formation in Montana and Adjacent Areas

A conspicuous two hundred and fifty foot sandstone of central Montana, known as the Eagle Formation, constitutes part of the some five thousand feet of Cretaceous sediments in the state. It stands out in steep cliffs which stretch for many miles in the outcrop area from Wyoming to Canada.

Helena and Ennis Talc Deposits

The purpose of this report is to collect geologic data concerning two Montana talc occurrences at Helena and Ennis and to offer some explanation as to their origin. The two deposits cited are in somewhat similar lithologic settings and both possess the same mineralogical and structural features. Because of this similarity only the Helena deposit is covered in detail.

Stratigraphic Studies of the Ordovician and Devonian Formations Throughout the Northwest Plains Area

As yet the knowledge of Ordovician and Devonian physiography in this vast northwest region remains almost a complete secret. Very little, in any, work has been done along this line with the exception of those areas where the various formations outcrop.

Development and characterization of fluorescent pH sensors based on porous silica and hydrogel support matrices

The hydrogen ion activity (pH) is a very important parameter in environment monitoring, biomedical research and other applications. Optical pH sensors have several advantages over traditional potentiometric pH measurement, such as high sensitivity, no need of constant calibration, easy for miniaturization and possibility for remote sensing. Several pH indicators has been successfully immobilized in three different solid porous materials to use as pH sensing probes. The fluorescent pH indicator fluorescein-5-isothiocyanate (FITC) was covalently bound onto the internal surface of porous silica (pore size ~10 nm) and retained its pH sensitivity. The excited state pK* a of FITC in porous silica (5.58) was slightly smaller than in solution (5.68) due to the free silanol groups (Si-OH) on the silica surface. The pH sensitive range for this probe is pH 4.5 - 7.0 with an error less than 0.1 pH units. The probe response was reproducible and stable for at least four month, stored in DI water, but exhibit a long equilibrium of up to 100 minutes. Sol-gel based pH sensors were developed with immobilization of two fluorescent pH indicators fluorescein-5-(and-6)-sulfonic acid, trisodium salt (FS) and 8-hydroxypyrene- 1,3,6-trisulfonic acid (HPTS) through physical entrapment. Prior to immobilization, the indicators were ion-paired with a common surfactant hexadecyltrimethylammonium bromide (CTAB) in order to prevent leaching. The sol-gel films were synthesized through the hydrolysis of two different precursors, ethyltriethoxysilane (ETEOS) and 3- glycidoxypropyltrimethoxysilane (GPTMS) and deposited on a quartz slide through spin coating. The pK a of the indicators immobilized in sol-gel films was much smaller than in solutions due to silanol groups on the inner surface of the sol-gel films and ammonium groups from the surrounding surfactants. Unlike in solution, the apparent pK a of the indicators in sol-gel films increased with increasing ionic strength. The equilibrium time for these sensors was within 5 minutes (with film thickness of ~470 nm). Polyethylene glycol (PEG) hydrogel was of interest for optical pH sensor development because it is highly proton permeable, transparent and easy to synthesize. pH indicators can be immobilized in hydrogel through physical entrapment and copolymerization. FS and HPTS ion-pairs were physically entrapped in hydrogel matrix synthesized via free radical initiation. For covalent immobilization, three indicators, 6,8-dihydroxypyrene-1,3- disulfonic acid (DHPDS), 2,7-dihydroxynaphthalene-3,6-disulfonic acid (DHNDS) and cresol red were first reacted with methacrylic anhydride (MA) to form methacryloylanalogs for copolymerization. These hydrogels were synthesized in aqueous solution with a redox initiation system. The thickness of the hydrogel film is controlled as ~ 0.5 cm and the porosity can be adjusted with the percentage of polyethylene glycol in the precursor solutions. The pK a of the indicators immobilized in the hydrogel both physically and covalently were higher than in solution due to the medium effect. The sensors are stable and reproducible with a short equilibrium time (less than 4 minutes). In addition, the color change of cresol red immobilized hydrogel is vivid from yellow (acidic condition) to purple (basic condition). Due to covalently binding, cresol red was not leaching out from the hydrogel, making it a good candidate of reusable "pH paper".

Mineralogy and Genesis of the Vermiculite Deposits at Libby, Montana

The problem considered in this report is one of the mineralogy and mode of formation of the extremely pure, large bodies of vermiculite. Mineralogically the ultrabasic intrusive, with which the economic mineral is associated, presents an array of rather unusual minerals. The determination of these minerals, their associations, and the sequence of alteration that lead to the formation of the vermiculite bodies, constitutes the problem.

Geology of Iron Deposits at Princeton Montana and Economic Aspects of Iron Ore in Montana

The purpose of this paper is to introduce to the reader, an iron deposit in the Princeton district, about 19 miles northeast by highway from Philipsburg, Montana. Heretofore there has been no written literature on this deposit. It is also intended to investigate the economic possibilities of iron ore in general in the State of Montana.

Sizing by Elutriation of Finely Ground Quartz and Pyrite

Elutriation, as a means of sorting mineral particles, has received marked attention during the last fifteen years. Its use in the ceramics industry for the sorting of clays was recognized even before this.

Porosity and Oil Absorption Properties of Metal Compacts of Copper - Tin - Graphite

Powder metallurgy, the most recent innovation in met­allurgical process, is not a new art; although not until recently did it become a matter of general interest, this being due not only to the products formed but also to the possibilities of future developments. The manufacture and application of metal powders is now beginning to take a position as a recognized part of the science of metallurgy.

The Determination of Aluminum in the Presence of Manganese and Iron by the Use of a Mercury Cathode

Since 1880, when Wolcott Gibbs made the suggestion that mercury could be used as a cathode in gravimetric electroanalysis, many articles have appeared in literature either criticizing the method or citing successful results which have been obtained by it.

Chromite Deposits Near Red Lodge and Silver Star, Montana

The Red Lodge and Silver Star chromite deposits of Montana have stimulated much interest during periods of war. The Red Lodge deposit is 25 miles southwest of Red Lodge which is also the nearest railroad point. Several workings are scattered throughout the area, exposing lense-like ore bodies averaging 33% chrome oxide. Silver Star is a much smaller deposit 5 miles west of Silver Star, Montana, which is its nearest rail­road point. Lenses of chromite are exposed by pits and trench­es, which average approximately 36% chromic oxide.

Testing and Concentration of a Low Grade Gold Ore from Marysville, Montana

The purpose of this thesis was to investigate and attempt to concentrate low grade cyanided tailings rejected from the old Montana Mining and milling Company's mill situated 4 miles below the town of Marysville, Montana.

Permeability and Porosity Studies of the Cut Bank Oil Sand

In studying the Cut Bank field and its numerous wells, it is found that dry holes are surrounded by producing wells, and also that the field as a whole is very irregular; water, oil, and gas zones in many cases following no definite pattern. In some instances, this phenomenon may be due to the lensing and thinning of the producing sands, but it is evident that this is not the only factor. There­fore, the controlling factors must be porosity and permeability.

An Attempt to Increase the Permeability and Porosity of the Cut Bank Oil Sand By Treatment with Various Reagents

The purpose of this investigation was to attempt to find some means of increasing the effective porosity and permeabil­ity of the producing sands of the Cut Bank Oil Field, with the hope that thereby the ultimate recovery of petroleum from this field may be increased. Although the percentage increase in production thus effected would undoubtedly be small, it would represent a substantial volume of petroleum in view of the great quantity of oil and gas present in this field.

An Isopach Map and Discussion of the Marine Jurassic of Western United Sates and Canada

Recent demands for petroleum to carry on the war effort have resulted in widespread prospecting in the northern Great Plains. Nearly all oil wells now drilled are of a depth to penetrate the marine Jurassic formations. It is known that these strata differ in thickness from place to place, but information of distribution, thickness, and lithology has not yet been compiled.

Production of Iron-Tin Compacts by Powder Metallurgy and a Synopsis of their Principle Properties

This thesis is concerned primarily with the production of metal powder compacts of iron and tin. In producing these compacts, the effects of process­ing variables on some of the essential properties of the pellets made were investigated.