Navigating theory, negotiating difference and beating the system : a critical how-to of media assistance evaluation

The wave of democratisation across Europe, Africa, Asia and Latin America in the early 1990s triggered an increase in donor funding to media assistance initiatives, primarily within good governance policy frameworks. However, few media assistance projects have managed to effectively evaluate the impacts of their work. This thesis explores how the impacts of Australian media assistance on social change and governance can be most effectively evaluated and understood. The findings of this research suggest the importance of early investment in participatory planning of evaluation designs, which are then periodically revisited. These evaluation designs should be based on a theoretically sound link between models of change, evaluative questions and methods.

Children participating in science through digital-media literacies

This article outlines the findings of a research project in which primary school students in Queensland, Australia undertook science learning through media arts pedagogy. The project was a component of the URLearning Project. We found that students' development of digital media literacies allowed participation and communication in science in ways that were otherwise unavailable to them.

Multiphase porous media model for heat and mass transfer during drying of agricultural products

Modelling of food processing is complex because it involves sophisticated material and transport phenomena. Most of the agricultural products such fruits and vegetables are hygroscopic porous media containing free water, bound water, gas and solid matrix. Considering all phase in modelling is still not developed. In this article, a comprehensive porous media model for drying has been developed considering bound water, free water separately, as well as water vapour and air. Free water transport was considered as diffusion, pressure driven and evaporation. Bound water assumed to be converted to free water due to concentration difference and also can diffuse. Binary diffusion between water vapour and air was considered. Since, the model is fundamental physics based it can be applied to any drying applications and other food processing where heat and mass transfer takes place in porous media with significant evaporation and other phase change.

Aesthetics of urban media façades

This paper sets out to develop and extend current literature on design practices for ambient media façades. It does this by bringing together theories of ambient media, computational aesthetics, and urban aesthetics. This unique theoretical combination has informed the design of several exemplars produced by the author, which are discussed as case studies.

Keeping it natural: Does persuasive magazine content have an effect on young women's intentions for birth?

Information in the popular media tends to be biased toward promoting the benefits of medicalized birth for low-risk pregnancies. We aimed to assess the effect of communicating the benefits of non-medicalized birth in magazine articles on women’s birth intentions and to identify the mechanisms by which social communication messages affected women’s intentions for birth. A convenience sample of 180 nulliparous Australian women aged 18–35 years were randomly exposed to a magazine article endorsing non-medicalized birth (using either celebrity or non-celebrity endorsement) or organic eating (control) throughout June–July 2011. Magazine articles that endorsed non-medicalized birth targeted perceived risk of birth, expectations for labor and birth, and attitudes toward birth. These variables and intention for birth were assessed by self-report before and after exposure. Exposure to a magazine article that endorsed non-medicalized birth significantly reduced women’s intentions for a medicalized birth, regardless of whether the endorsement was by celebrities or non-celebrities. Changes in perceived risk of birth mediated the effect of magazine article exposure on women’s intentions for a medicalized birth. Persuasive communication that endorses non-medicalized birth could be delivered at the population level and may reduce women’s intentions for a medicalized birth.

Old mastheads and new media : newspapers striving to adapt in Australia and South-east Asia

As a key element in their response to new media forcing transformations in mass media and media use, newspapers have deployed various strategies to not only establish online and mobile products, and develop healthy business plans, but to set out to be dominant portals. Their response to change was the subject of an early investigation by one of the present authors (Keshvani 2000). That was part of a set of short studies inquiring into what impact new software applications and digital convergence might have on journalism practice (Tickle and Keshvani 2000), and also looking for demonstrations of the way that innovations, technologies and protocols then under development might produce a “wireless, streamlined electronic news production process (Tickle and Keshvani 2001).” The newspaper study compared the online products of The Age in Melbourne and the Straits Times in Singapore. It provided an audit of the Singapore and Australia Information and Communications Technology (ICT) climate concentrating on the state of development of carrier networks, as a determining factor in the potential strength of the two services with their respective markets. In the outcome, contrary to initial expectations, the early cable roll-out and extensive ‘wiring’ of the city in Singapore had not produced a level of uptake of Internet services as strong as that achieved in Melbourne by more ad hoc and varied strategies. By interpretation, while news websites and online content were at an early stage of development everywhere, and much the same as one another, no determining structural imbalance existed to separate these leading media participants in Australia and South-east Asia. The present research revisits that situation, by again studying the online editions of the two large newspapers in the original study, and one other, The Courier Mail, (recognising the diversification of types of product in this field, by including it as a representative of Newscorp, now a major participant). The inquiry works through the principle of comparison. It is an exercise in qualitative, empirical research that establishes a comparison between the situation in 2000 as described in the earlier work, and the situation in 2014, after a decade of intense development in digital technology affecting the media industries. It is in that sense a follow-up study on the earlier work, although this time giving emphasis to content and style of the actual products as experienced by their users. It compares the online and print editions of each of these three newspapers; then the three mastheads as print and online entities, among themselves; and finally it compares one against the other two, as representing a South-east Asian model and Australian models. This exercise is accompanied by a review of literature on the developments in ICT affecting media production and media organisations, to establish the changed context. The new study of the online editions is conducted as a systematic appraisal of the first level, or principal screens, of the three publications, over the course of six days (10-15.2.14 inclusive). For this, categories for analysis were made, through conducting a preliminary examination of the products over three days in the week before. That process identified significant elements of media production, such as: variegated sourcing of materials; randomness in the presentation of items; differential production values among media platforms considered, whether text, video or stills images; the occasional repurposing and repackaging of top news stories of the day and the presence of standard news values – once again drawn out of the trial ‘bundle’ of journalistic items. Reduced in this way the online artefacts become comparable with the companion print editions from the same days. The categories devised and then used in the appraisal of the online products have been adapted to print, to give the closest match of sets of variables. This device, to study the two sets of publications on like standards -- essentially production values and news values—has enabled the comparisons to be made. This comparing of the online and print editions of each of the three publications was set up as up the first step in the investigation. In recognition of the nature of the artefacts, as ones that carry very diverse information by subject and level of depth, and involve heavy creative investment in the formulation and presentation of the information; the assessment also includes an open section for interpreting and commenting on main points of comparison. This takes the form of a field for text, for the insertion of notes, in the table employed for summarising the features of each product, for each day. When the sets of comparisons as outlined above are noted, the process then becomes interpretative, guided by the notion of change. In the context of changing media technology and publication processes, what substantive alterations have taken place, in the overall effort of news organisations in the print and online fields since 2001; and in their print and online products separately? Have they diverged or continued along similar lines? The remaining task is to begin to make inferences from that. Will the examination of findings enforce the proposition that a review of the earlier study, and a forensic review of new models, does provide evidence of the character and content of change --especially change in journalistic products and practice? Will it permit an authoritative description on of the essentials of such change in products and practice? Will it permit generalisation, and provide a reliable base for discussion of the implications of change, and future prospects? Preliminary observations suggest a more dynamic and diversified product has been developed in Singapore, well themed, obviously sustained by public commitment and habituation to diversified online and mobile media services. The Australian products suggest a concentrated corporate and journalistic effort and deployment of resources, with a strong market focus, but less settled and ordered, and showing signs of limitations imposed by the delay in establishing a uniform, large broadband network. The scope of the study is limited. It is intended to test, and take advantage of the original study as evidentiary material from the early days of newspaper companies’ experimentation with online formats. Both are small studies. The key opportunity for discovery lies in the ‘time capsule’ factor; the availability of well-gathered and processed information on major newspaper company production, at the threshold of a transformational decade of change in their industry. The comparison stands to identify key changes. It should also be useful as a reference for further inquiries of the same kind that might be made, and for monitoring of the situation in regard to newspaper portals on line, into the future.

Design of high mobility DPP-based polymer semiconductors for organic thin film transistors

π-Conjugated polymers are the most promising semiconductor materials to enable printed organic thin film transistors (OTFTs) due to their excellent solution processability and mechanical robustness. However, solution-processed polymer semiconductors have shown poor charge transport properties mainly originated from the disordered polymer chain packing in the solid state as compared to the thermally evaporated small molecular organic semiconductors. The low charge carrier mobility, typically < 0.1 cm2 /V.s, of polymer semiconductors poses a challenge for most intended applications such as displays and radio-frequency identification (RFID) tags. Here we present our recent results on the dike topyrrolopyrrole (DPP)-based polymers and demonstrate that when DPP is combined with appropriate electron donating moieties such as thiophene and thienothiophene, very high charge carrier mobility values of ~1 cm2/V.s could be achieved.

A non-fullerene electron acceptor based on fluorene and diketopyrrolopyrrole building blocks for solution-processable organic solar cells with an impressive open-circuit voltage

A novel solution-processable non-fullerene electron acceptor 6,6′-(5,5′-(9,9-dioctyl-9H-fluorene-2,7-diyl)bis(thiophene-5,2-diyl))bis(2,5-bis(2-ethylhexyl)-3-(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione) (DPP1) based on fluorene and diketopyrrolopyrrole conjugated moieties was designed, synthesized and fully characterized. DPP1 exhibited excellent solubility and high thermal stability which are essential for easy processing. Upon using DPP1 as an acceptor with the classical electron donor poly(3-hexylthiophene), solution processable bulk-heterojunction solar cells afforded a power conversion efficiency of 1.2% with a high open-circuit voltage (1.1 V). As per our knowledge, this value of open circuit voltage is one of the highest values reported so far for a bulk-heterojunction device using DPP1 as a non-fullerene acceptor.

The influence of social media on international students' choice of university and course

This thesis is a qualitative study of the influence of social media on the university and course decision making process of international students. It examines the role of social media in influencing international students' decisions on course and university selection and the role of social media in meeting their information needs. It also gathered inputs on how universities could engage, collaborate and communicate using social media communities and channels for more effective recruitment strategies.

Numerical investigation of upstream fuel injection through porous media for scramjet engines via surrogate-assisted evolutionary algorithms

A multi-objective design optimization study has been conducted for upstream fuel injection through porous media applied to the first ramp of a two-dimensional scramjet intake. The optimization has been performed by coupling evolutionary algorithms assisted by surrogate modeling and computational fluid dynamics with respect to three design criteria, that is, the maximization of the absolute mixing quantity, total pressure saving, and fuel penetration. A distinct Pareto optimal front has been obtained, highlighting the counteracting behavior of the total pressure against the mixing efficiency and fuel penetration. The injector location and size have been identified as the key design parameters as a result of a sensitivity analysis, with negligible influence of the porous properties in the configurations and conditions considered in the present study. Flowfield visualization has revealed the underlying physics associated with the effects of these dominant parameters on the shock structure and intensity.

Hybrid CuTCNQ/AgTCNQ metal-organic charge transfer complexes via galvanic replacement vs. corrosion recrystallization

This study reports a hybrid of two metal-organic semiconductors that are based on organic charge transfer complexes of 7,7,8,8-tetracyanoquinodimethane (TCNQ). It is shown that the spontaneous reaction between semiconducting microrods of CuTCNQ with Ag+ ions leads to the formation of a CuTCNQ/AgTCNQ hybrid, both in aqueous solution and acetonitrile, albeit with completely different reaction mechanisms. In an aqueous environment, the reaction proceeds by a complex galvanic replacement (GR) mechanism, wherein in addition to AgTCNQ nanowires, Ag0 nanoparticles and Cu(OH)2 crystals decorate the surface of CuTCNQ microrods. Conversely, in acetonitrile, a GR mechanism is found to be thermodynamically unfavorable and instead a corrosion-recrystallization mechanism leads to the decoration of CuTCNQ microrods with AgTCNQ nanoplates, resulting in a pure CuTCNQ/AgTCNQ hybrid metal-organic charge transfer complex. While hybrids of two different inorganic semiconductors are regularly reported, this report pioneers the formation of a hybrid involving two metal-organic semiconductors that will expand the scope of TCNQ-based charge transfer complexes for improved catalysis, sensing, electronics and biological applications.

Enabling a positive first year experience in higher education through social media and mobile technologies

The first year experience for students within Higher Education institutions has become increasingly important as these institutions strive to improve student retention rates. With many universities also focusing on transforming teaching and learning in an effort to attract and retain students, there is a growing demand to understand and respond to individual student requirements, such as the need to feel a sense of belonging. The literature identifies a sense of belonging as being paramount to a students satisfaction with the institution and it is within this context that this paper reports on a three year study of how first year pre-service education students use social media and mobile technologies in their personal lives and their formal education. More specifically, the study identifies trends in the use of these technologies and the growing need for students to use digital media sharing tools to connect and engage with their peers. The paper contrasts the differences in use between these groups as it seeks to identify the role these technologies can play in their teaching and learning, as well as in promoting an overall positive first year experience.

Defining a ‘democratic elite’ : key media in the battle for social responsibility

This paper offers a definition of elite media arguing their content focus will sufficiently meet social responsibility needs of democracy. Its assumptions come from the Finkelstein and Leveson Inquiries and regulatory British Royal Charter (2013). These provide guidelines on how media outlets meet ‘social responsibility’ standards, e.g. press has a ‘responsibility to be fair and accurate’ (Finkelstein); ethical press will feel a responsibility to ‘hold power to account’ (Leveson); news media ‘will be held strictly accountable’ (RC). The paper invokes the British principle of media opting-in to observe standards, and so serve the democracy. It will give examples from existing media, and consider social responsibility of media more generally. Obvious cases of ‘quality’ media: public broadcasters, e.g. BBC, Al-Jazeera, and ‘quality’ press, e.g. NYT, Süddeutscher Zeitung, but also community broadcasters, specialised magazines, news agencies, distinctive web logs, and others. Where providing commentary, these abjure gratuitous opinion -- meeting a standard of reasoned, informational and fair. Funding is almost a definer, many such services supported by the state, private trusts, public institutions or volunteering by staff. Literature supporting discussion on elite media will include their identity as primarily committed to a public good, e.g. the ‘Public Value Test’, Moe and Donders (2011); with reference also to recent literature on developing public service media. Within its limits the paper will treat social media as participants among all media, including elite, and as a parallel dimension of mass communication founded on inter-activity. Elite media will fulfil the need for social responsibility, firstly by providing one space, a ‘plenary’ for debate. Second is the notion of building public recognition of elite media as trustworthy. Third is the fact that elite media together are a large sector with resources to sustain social cohesion and debate; notwithstanding pressure on funds, and impacts of digital transformation undermining employment in media more than in most industries.

Usulan kerangka kebijakan penggunaan media sosial untuk perpustakaan perguruan tinggi

This study provides proposed core elements of social media policy that specifically designed for academic libraries.Evaluation of social media policies from five organisations and a review of the literature were used for data collection.There are 15 proposed core elements recommended: policy objectives; policy definition; scope of the policy;university’s vision and mission; policy users; disclaimer; confidentiality; copyright; privacy; workflow; publicinformation; the use of professional language; the accuracy of the information; rule for links; and university andlibrary’s voices. The results of this study provide important aspects in the development of social media policy. Theproposed core elements of the social media policy discussed in this paper is specifically designed for the academiclibraries, but can also be used for other library types. Kajian ini memuat usulan kerangka kebijakan penggunaan media sosial dari elemen-elemen inti yang disusun khusus untuk perpustakaan perguruan tinggi. Evaluasi kebijakan penggunaan media sosial dari lima organisasi dan kajian literatur digunakan untuk pengumpulan data. Ada 15 elemen inti kebijakan yang diusulkan, yaitu: tujuan kebijakan; definisi kebijakan; lingkup kebijakan; visi dan misi universitas; sasaran pengguna kebijakan; disclaimer; kerahasiaan; hak cipta; privasi; alur kerja; informasi publik; penggunaan bahasa professional; keakuratan informasi; kaidah tautan; serta suara universitas dan perpustakaan. Hasil kajian ini menyediakan aspek penting dalam pengembangan kebijakan penggunaan media sosial. Usulan elemen inti kebijakan yang diusulkan dalam kajian ini secara khusus dirancang untuk perpustakaan perguruan tinggi, tetapi dapat juga digunakan untuk perpustakaan jenis lainnya.

Development and application of Palygorskite porous ceramsite in a biological aerated filter (BAF)

Novel filter Palygorskite porous ceramsite (PC) was prepared using Palygorskite clay, poreforming material sawdust, and sodium silicate with a mass ratio of 10:2:1 after sintering at 700°C for 180 min. PC was characterized with X-ray diffraction, X-ray fluorescence, scanning electron microscopy, elemental, and porosimetry. PC had a total porosity of 67% and specific surface area of 61 m2/g. In order to assess the usefulness of PC as a medium for biological aerated filters (BAF), PC and (commercially available ceramsite) CAC were used to treat wastewater city in two laboratory-scale upflow BAFs. The results showed that the reactor containing PC was more efficient than the reactor containing CAC in terms of total organic carbon (TOC), ammonia nitrogen (NH3-N), and the removal of total nitrogen (TN) and phosphorus (P). This system was found to be more efficient at water temperatures ranging from 20 to 26°C, an air–water (A/W) ratio of 3:1, dissolved oxygen concentration >4.00 mg/L, and hydraulic retention time (HRT) ranging from 0.5 to 7 h. The interconnected porous structure produced for PC was suitable for microbial growth, and primarily protozoan and metazoan organisms were found in the biofilm. Microorganism growth also showed that, under the same submerged culture conditions, the biological mass in PC was significantly higher than in CAC (34.1 and 2.2 mg TN/g, respectively). In this way, PC media can be considered suitable for the use as a medium in novel biological aerated filters for the simultaneous removal of nitrogen and phosphorus.