A prospective, randomized, open label, phase iii clinical trial of novottf-100a vs best standard of care chemotherapy in patients with recurrent glioblastoma

BACKGROUND: Glioblastoma, the most common adult primary malignant brain tumor, confers poor prognosis (median survival of 15 months) notwithstanding aggressive treatment. Combination chemotherapy including carmustine (BCNU) or temozolomide (TMZ) with the MGMT inhibitor O6-benzylguanine (O6BG) has been used, but has been associated with dose-limiting hematopoietic toxicity. OBJECTIVE: To assess safety and efficacy of a retroviral vector encoding the O6BG-resistant MGMTP140K gene for transduction and autologous transplantation of hematopoietic stem cells (HSCs) in MGMT unmethylated, newly diagnosed glioblastoma patients in an attempt to chemoprotect bone marrowduring combination O6BG/TMZ therapy. METHODS: Three patients have been enrolled in the first cohort. Patients underwent standard radiation therapy without TMZ followed by G-CSF mobilization, apheresis, and conditioning with 600 mg/m2 BCNU prior to infusion of gene-modified cells. Posttransplant, patients were treated with 28-day cycles of single doseTMZ (472 mg/m2) with 48-hour intravenous O6BG (120 mg/m2 bolus, then 30 mg/m2/d). RESULTS: The BCNU dose was nonmyeloablative with ANC ,500/mL for ≤3 d and nadir thrombocytopenia of 28,000/mL. Gene marking in pre-infusion colony forming units (CFUs) was 70.6%, 79.0%, and 74.0% in Patients 1, 2, and 3, respectively, by CFU-PCR. Following engraftment, gene marking in white blood cells and sorted granulocytes ranged between 0.37-0.84 and 0.33-0.83 provirus copies, respectively, by real-time PCR. Posttransplant gene marking in CFUs from CD34-selected cells ranged from 28.5% to 47.4%. Patients have received 4, 3, and 2 cycles of O6BG/TMZ, respectively, with evidence for selection of gene-modified cells. One patient has received a single dose-escalated cycle at 590 mg/m2 TMZ. No additional extra-hematopoietic toxicity has been observed thus far and all three patients exhibit stable disease at 7-8 months since diagnosis CONCLUSIONS: We believe that these data demonstrate the feasibility of achieving significant engraftment of MGMTP140K-modified cells with a well-tolerated dose of BCNU. Further follow-up will determine whether this approach will allow for further dose escalation of TMZ and improved survival.

Protein kinase C-activating tumor promoters enhance the differentiation of astrocytes in aggregating fetal brain cell cultures.

Serum-free aggregating cell cultures of fetal rat telencephalon treated with the potent tumor promoter phorbol 12-myristate 13-acetate (PMA) showed a marked, rapid, and sustained increase in the activity of the astrocyte-specific enzyme glutamine synthetase (GS). This effect was accompanied by a small increase in RNA synthesis and a progressive reduction in DNA synthesis. Only mitotically active cultures were responsive to PMA treatments. Since in aggregate cultures astrocytes are the preponderant cell type, both in number and mitotic activity, it can be concluded that PMA induces and/or enhances the terminal differentiation of astrocytes. The developmental expression of GS was also greatly stimulated by mezerein, a potent nonphorbol tumor promoter, but not by 4 alpha-phorbol 12,13-didecanoate, a nonpromoting phorbol ester. Since both tumor promoters, PMA and mezerein, are potent and specific activators of C-kinase, it is suggested that C-kinase plays a regulatory role in the growth and differentiation of normal astrocytes.

Ostéogénèse atypique après séquestrectomies multiples pour fracture ouverte infectée du fémur: un cas [Atypical osteogenesis following multiple sequestrectomies for infected open fracture of the femur: a case]

The authors present the case of an open fracture of femur Cauchoix type II with an infection due to Escherichia coli, Clostridium perfringens, Enterococcus and Aspergillus fumigatus. After several sequestrectomies and five hyperbaric sessions, apyrexia was attained at the end of the third month, the femur having been stabilised with an external fixator. The 15 cm gap due to loss of bone substance, filled at each dressing with an antiseptic iodine based ointment, closed itself finishing as continuous bone five months after the accident, the granulation tissue having been recovered by thin skin grafts. A repeated fracture occurring forty-eight hours after the removal of the Hoffmann frame was treated by fitting an Ilizarov fixator arriving at consolidation in seven months. The authors examine different possibilities of accelerating osteogenesis and highlight the potential role of iodine ointment as inductive to osteogenesis stemming from a periosteal layer seemingly held in place.

Herramientas open source para la creación de portales

En aquest treball es proposa una aproximació al món del codi font obert des del punt de vista de la realització de portals col·laboratius i les seves eines involucrades. Per fer-ho, es passa revista als diferents tipus d'aplicacions, plataformes i utilitats que trobem disponibles, i s'agrupen en diferents categories: infraestructura i sistemes, serveis de comunicació, serveis de comunitat, serveis genèrics de portal, eines d'interacció amb sistemes mòbils, eines per al desenvolupament i prova i llibreries de suport.

Treg-therapy allows mixed chimerism and transplantation tolerance without cytoreductive conditioning.

Establishment of mixed chimerism through transplantation of allogeneic donor bone marrow (BM) into sufficiently conditioned recipients is an effective experimental approach for the induction of transplantation tolerance. Clinical translation, however, is impeded by the lack of feasible protocols devoid of cytoreductive conditioning (i.e. irradiation and cytotoxic drugs/mAbs). The therapeutic application of regulatory T cells (Tregs) prolongs allograft survival in experimental models, but appears insufficient to induce robust tolerance on its own. We thus investigated whether mixed chimerism and tolerance could be realized without the need for cytoreductive treatment by combining Treg therapy with BM transplantation (BMT). Polyclonal recipient Tregs were cotransplanted with a moderate dose of fully mismatched allogeneic donor BM into recipients conditioned solely with short-course costimulation blockade and rapamycin. This combination treatment led to long-term multilineage chimerism and donor-specific skin graft tolerance. Chimeras also developed humoral and in vitro tolerance. Both deletional and nondeletional mechanisms contributed to maintenance of tolerance. All tested populations of polyclonal Tregs (FoxP3-transduced Tregs, natural Tregs and TGF-beta induced Tregs) were effective in this setting. Thus, Treg therapy achieves mixed chimerism and tolerance without cytoreductive recipient treatment, thereby eliminating a major toxic element impeding clinical translation of this approach.

Health Inequalities Intervention Tool for Spearheads 2009 (Click SAVE NOT OPEN when prompted)

The Spearhead Intervention Tool has been commissioned by the Department of Health through the Association of Public Health Observatories (APHO). This version of the tool has been updated with latest data for 2005-07. The tool is designed to assist commissioners in Spearhead Primary Care Trusts (PCTs) with their Local Delivery Planning (LDP) and commissioning and to assist Spearhead Local Authorities (LAs) with the delivery of Local Area Agreements (LAAs). It highlights key issues for Spearhead PCTs and LAs to consider in order to achieve the life expectancy element of the Government̢?Ts Public Service Agreement (PSA) on health inequalities by 2010.

Fluorescence behavioral imaging (FBI) tracks identity in heterogeneous groups of Drosophila.

Distinguishing subpopulations in group behavioral experiments can reveal the impact of differences in genetic, pharmacological and life-histories on social interactions and decision-making. Here we describe Fluorescence Behavioral Imaging (FBI), a toolkit that uses transgenic fluorescence to discriminate subpopulations, imaging hardware that simultaneously records behavior and fluorescence expression, and open-source software for automated, high-accuracy determination of genetic identity. Using FBI, we measure courtship partner choice in genetically mixed groups of Drosophila.

Myelin gene expression during demyelination and remyelination in aggregating brain cell cultures.

Remyelination can be studied in aggregating rat brain cell cultures after limited demyelination. Demyelination was induced using a monoclonal antibody against myelin/oligodendrocyte glycoprotein (MOG mAb), in the presence of complement. De- and remyelination were assessed by measuring myelin basic protein (MBP). Two days after removing the MOG mAb, MBP levels reached 50% of controls and after 7 days 93%. During this period, cell proliferation determined by [14C]thymidine incorporation was similar in remyelinating and control cultures. Hormones and growth factors were tested for possible stimulatory effect on remyelinating cultures. Bovine growth hormone (bGH), triiodothyronine (T3), basic fibroblast growth factor (bFGF) and platelet-derived growth factor (PDGF) did not improve remyelination. Only epidermal growth factor (EGF) increased the level of remyelination. PDGF increased the rate of cell proliferation in both control and remyelinating cultures. A significant proportion of oligodendrocytes entered the cell division cycle and were not available for remyelination. The results obtained with PDGF and FGF (inhibition) support the idea that a pool of progenitor cells was still present and able to proliferate and differentiate into myelinating oligodendrocytes. The levels of myelin protein mRNAs were investigated during de- and remyelination. During demyelination, myelin protein mRNA levels decreased to approximately 50% of control cultures and returned to normal during remyelination. These preliminary results indicate that normal levels of gene transcription are sufficient to meet the increased need for newly synthesized myelin proteins during remyelination.

Evaluation of cultures of Saccharomyces cerevisae as baits for Triatoma dimidiata and Triatoma pallidipennis

We tested the attraction of Triatoma dimidiata and T. pallidipennis to traps baited with yeast volatiles. Two traps were simultaneously presented in opposite sides of an experimental arena. One trap presented a yeast culture in sucrose solution, while the other contained sucrose solution as control. A first experimental series was done without offering a central refuge for bugs. In a second series, one shelter where the insects could hide was offered and the traps were presented afterwards. In the first series, yeast baited traps attracted significantly more insects than control ones for both species. In the second series, T. pallidipennis was significantly attracted to yeast, whereas T. dimidiata was not attracted. The potential use of yeast baited traps for capturing these vectors of Chagas disease is discussed.

Functionalization of microstructured open-porous bioceramic scaffolds with human fetal bone cells.

Bone substitute materials allowing trans-scaffold migration and in-scaffold survival of human bone-derived cells are mandatory for development of cell-engineered permanent implants to repair bone defects. In this study, we evaluated the influence on human bone-derived cells of the material composition and microstructure of foam scaffolds of calcium aluminate. The scaffolds were prepared using a direct foaming method allowing wide-range tailoring of the microstructure for pore size and pore openings. Human fetal osteoblasts (osteo-progenitors) attached to the scaffolds, migrated across the entire bioceramic depending on the scaffold pore size, colonized, and survived in the porous material for at least 6 weeks. The long-term biocompatibility of the scaffold material for human bone-derived cells was evidenced by in-scaffold determination of cell metabolic activity using a modified MTT assay, a repeated WST-1 assay, and scanning electron microscopy. Finally, we demonstrated that the osteo-progenitors can be covalently bound to the scaffolds using biocompatible click chemistry, thus enhancing the rapid adhesion of the cells to the scaffolds. Therefore, the different microstructures of the foams influenced the migratory potential of the cells, but not cell viability. Scaffolds allow covalent biocompatible chemical binding of the cells to the materials, either localized or widespread integration of the scaffolds for cell-engineered implants.

Ecologie industrielle de l'aluminium, flux de matières et d'énergie : réalités et enjeux du recyclage

Dans les dernières années du 20ème siècle, l'aluminium a fait l'objet de beaucoup de communications outrancières et divergentes cautionnées par des scientifiques et des organismes faisant autorité. En 1986, la société PECHINEY le décrète perpétuel tel le mouvement « L'aluminium est éternel. Il est recyclable indéfiniment sans que ses propriétés soient altérées », ce qui nous avait alors irrité. Peu de temps après, en 1990, une communication tout aussi outrancière et irritante d'une grande organisation environnementale, le World Wild Fund, décrète que « le recyclage de l'aluminium est la pire menace pour l'environnement. Il doit être abandonné ». C'est ensuite à partir de la fin des années 1990, l'explosion des publications relatives au développement durable, le bien mal nommé. Au développement, synonyme de croissance obligatoire, nous préférons société ou organisation humaine et à durable, mauvaise traduction de l'anglais « sustainable », nous préférons supportable : idéalement, nous aurions souhaité parler de société durable, mais, pour être compris de tous, nous nous sommes limités à parler dorénavant de développement supportable. Pour l'essentiel, ces publications reconnaissent les très graves défauts de la métallurgie extractive de l'aluminium à partir du minerai et aussi les mérites extraordinaires du recyclage de l'aluminium puisqu'il représente moins de 10% de la consommation d'énergie de la métallurgie extractive à partir du minerai (on verra que c'est aussi moins de 10% de la pollution et du capital). C'est précisément sur le recyclage que se fondent les campagnes de promotion de l'emballage boisson, en Suisse en particulier. Cependant, les données concernant le recyclage de l'aluminium publiées par l'industrie de l'aluminium reflètent seulement en partie ces mérites. Dans les années 1970, les taux de croissance de la production recyclée sont devenus plus élevés que ceux de la production électrolytique. Par contre, les taux de recyclage, établis à indicateur identique, sont unanimement tous médiocres comparativement à d'autres matériaux tels le cuivre et le fer. Composante de l'industrie de l'aluminium, le recyclage bénéficie d'une image favorable auprès du grand public, démontrant le succès des campagnes de communication. A l'inverse, à l'intérieur de l'industrie de l'aluminium, c'est une image dévalorisée. Les opinions émises par tous les acteurs, commerçants, techniciens, dirigeants, encore recueillies pendant ce travail, sont les suivantes : métier de chiffonnier, métier misérable, métier peu technique mais très difficile (un recycleur 15 d'aluminium n'a-t-il pas dit que son métier était un métier d'homme alors que celui du recycleur de cuivre était un jeu d'enfant). A notre avis ces opinions appartiennent à un passé révolu qu'elles retraduisent cependant fidèlement car le recyclage est aujourd'hui reconnu comme une contribution majeure au développement supportable de l'aluminium. C'est bien pour cette raison que, en 2000, l'industrie de l'aluminium mondiale a décidé d'abandonner le qualificatif « secondaire » jusque là utilisé pour désigner le métal recyclé. C'est en raison de toutes ces données discordantes et parfois contradictoires qu'a débuté ce travail encouragé par de nombreuses personnalités. Notre engagement a été incontestablement facilité par notre connaissance des savoirs indispensables (métallurgie, économie, statistiques) et surtout notre expérience acquise au cours d'une vie professionnelle menée à l'échelle mondiale dans (recherche et développement, production), pour (recherche, développement, marketing, stratégie) et autour (marketing, stratégie de produits connexes, les ferro-alliages, et concurrents, le fer) de l'industrie de l'aluminium. Notre objectif est de faire la vérité sur le recyclage de l'aluminium, un matériau qui a très largement contribué à faire le 20ème siècle, grâce à une revue critique embrassant tous les aspects de cette activité méconnue ; ainsi il n'y a pas d'histoire du recyclage de l'aluminium alors qu'il est plus que centenaire. Plus qu'une simple compilation, cette revue critique a été conduite comme une enquête scientifique, technique, économique, historique, socio-écologique faisant ressortir les faits principaux ayant marqué l'évolution du recyclage de l'aluminium. Elle conclut sur l'état réel du recyclage, qui se révèle globalement satisfaisant avec ses forces et ses faiblesses, et au-delà du recyclage sur l'adéquation de l'aluminium au développement supportable, adéquation largement insuffisante. C'est pourquoi, elle suggère les thèmes d'études intéressant tous ceux scientifiques, techniciens, historiens, économistes, juristes concernés par une industrie très représentative de notre monde en devenir, un monde où la place de l'aluminium dépendra de son aptitude à satisfaire les critères du développement supportable. ABSTRACT Owing to recycling, the aluminium industry's global energetic and environmental prints are much lower than its ore extractive metallurgy's ones. Likewise, recycling will allow the complete use of the expected avalanche of old scraps, consequently to the dramatic explosion of aluminium consumption since the 50's. The recycling state is characterized by: i) raw materials split in two groups :one, the new scrap, internal and prompt, proportional to semi-finished and finished products quantities, exhibits a fairly good and regular quality. The other, the old scrap, proportional to the finished products arrivïng at their end-of--life, about 22 years later on an average, exhibits a variable quality depending on the collect mode. ii) a poor recycling rate, near by that of steel. The aluminium industry generates too much new internal scrap and doesn't collect all the availa~e old scrap. About 50% of it is not recycled (when steel is recycling about 70% of the old scrap flow). iii) recycling techniques, all based on melting, are well handled in spite of aluminium atiiníty to oxygen and the practical impossibility to purify aluminium from any impurity. Sorting and first collect are critical issues before melting. iv) products and markets of recycled aluminium :New scraps have still been recycled in the production lines from where there are coming (closed loop). Old scraps, mainly those mixed, have been first recycled in different production lines (open loop) :steel deoxidation products followed during the 30's, with the development of the foundry alloys, by foundry pieces of which the main market is the automotive industry. During the 80's, the commercial development of the beverage can in North America has permitted the first old scrap recycling closed loop which is developing. v) an economy with low and erratic margins because the electrolytic aluminium quotation fixes scrap purchasing price and recycled aluminium selling price. vi) an industrial organisation historically based on the scrap group and the loop mode. New scrap is recycled either by the transformation industry itself or by the recycling industry, the remelter, old scrap by the refiner, the other component of the recycling industry. The big companies, the "majors" are often involved in the closed loop recycling and very seldom in the open loop one. To-day, aluminium industry's global energetic and environmental prints are too unbeara~ e and the sustainaЫe development criteria are not fully met. Critical issues for the aluminium industry are to better produce, to better consume and to better recycle in order to become a real sustainaЫe development industry. Specific issues to recycling are a very efficient recycling industry, a "sustainaЫe development" economy, a complete old scrap collect favouring the closed loop. Also, indirectly connected to the recycling, are a very efficient transformation industry generating much less new scrap and a finished products industry delivering only products fulfilling sustainaЫe development criteria.

Social influences on fertility : a comparative mixed methods study in eastern and western Germany

This article uses a mixed methods design to investigate the effects of social influence on family formation in a sample of eastern and western German young adults at an early stage of their family formation. Theoretical propositions on the importance of informal interaction for fertility and family behavior are still rarely supported by systematic empirical evidence. Major problems are the correct identification of salient relationships and the comparability of social networks across population subgroups. This article addresses the two issues through a combination of qualitative and quantitative data collection and analysis. In-depth interviewing, network charts, and network grids are used to map individual personal relationships and their influence on family formation decisions. In addition, an analysis of friendship dyads is provided.