Predictive reliability and prognostics for electronic components: current capabilities and future challenges

Future analysis tools that predict the behavior of electronic components, both during qualification testing and in-service lifetime assessment, will be very important in predicting product reliability and identifying when to undertake maintenance. This paper will discuss some of these techniques and illustrate these with examples. The paper will also discuss future challenges for these techniques.

Multilevel refinement for combinatorial optimisation: boosting metaheuristic performance

The multilevel paradigm as applied to combinatorial optimisation problems is a simple one, which at its most basic involves recursive coarsening to create a hierarchy of approximations to the original problem. An initial solution is found, usually at the coarsest level, and then iteratively refined at each level, coarsest to finest, typically by using some kind of heuristic optimisation algorithm (either a problem-specific local search scheme or a metaheuristic). Solution extension (or projection) operators can transfer the solution from one level to another. As a general solution strategy, the multilevel paradigm has been in use for many years and has been applied to many problem areas (for example multigrid techniques can be viewed as a prime example of the paradigm). Overview papers such as [] attest to its efficacy. However, with the exception of the graph partitioning problem, multilevel techniques have not been widely applied to combinatorial problems and in this chapter we discuss recent developments. In this chapter we survey the use of multilevel combinatorial techniques and consider their ability to boost the performance of (meta)heuristic optimisation algorithms.

Solid phase velocity measurements utilising electrostatic sensors and cross correlation signal processing

Gas-solids two phase systems are widely employed within process plant in the form of pneumatic conveyors, dust extraction systems and solid fuel injection systems. The measurement of solids phase velocity therefore has wide potential application in flow monitoring and, in conjunction with density measurement instrumentation, solids mass flow rate measurement. Historically, a number of authors have detailed possible measurement techniques, and some have published limited test results. It is, however, apparent that none of these technologies have found wide application in industry. Solids phase velocity measurements were undertaken using real time cross correlation of signals from two electrostatic sensors spaced axially along a pipeline conveying pulverised coal (PF). Details of the measurement equipment, the pilot scale test rig and the test results are presented.

Some Practical Considerations In The Measurement Of Pollution Effects On Bivalve Mollusks And Some Possible Ecological Consequences

A consideration of some physiological (rates of oxygen consumption, the scope for growth) and cellular (the cytochemical latency of a lysosomal enzyme) processes in bivalve molluscs suggests that animal size and seasonal changes related to the gametogenic cycle are important sources of natural variability. Correcting for size using regression techniques, and limiting measurements to one part of the gametogenic cycle, reduces observed natural variability considerably. Differences between populations are then still apparent, but the results of laboratory experiments with hydrocarbons from crude oil suggest that it should be possible to detect sub-lethal effects due to pollution (the ‘signal’) in the presence of the remaining natural variability (the ‘noise’). Statistical considerations, taken together with results from current studies on Mytilus edulis and Scobicularia plana, indicate that sample sizes of 10–15 individuals should suffice for the detection of possible pollution effects. The physiological effects to be expected in the presence of sub-lethal levels of polluting hydrocarbons are on a scaie that can cause significant ecological damage to a population through a reduction in fecundity and the residual reproductive value of the individuals.

European Project on Ocean Acidification (EPOCA): Objectives, products and scientific highlights

The European Project on Ocean Acidification (EPOCA) is Europe's first large-scale research initiative devoted to studying the impacts and consequences of ocean acidification. More than 100 scientists from 27 institutes and nine countries bring their expertise to the project, resulting in a multidisciplinary and versatile consortium. The project is funded for four years (2008 to 2012) by the European Commission within its Seventh Framework Programme. This article describes EPOCA and explains its different aspects, objectives, and products. Following a general introduction, six boxes highlight outcomes, techniques, and scientific results from each of the project's core themes.

Shore Shapers: Introducing children and the general public to biogeomorphological processes and geodiversity

Coastal processes and wildlife shape the coast into a variety of eye-catching and enticing landforms that attract people to marvel at, relax and enjoy coastal geomorphology. These landforms also influence biological communities by providing habitat and refuge. There are very few field guides to explain these processes to the general public and children. In contrast, there is a relative wealth of resources and organised activities introducing people to coastal wildlife, especially on rocky shores. These biological resources typically focus on the biology and climatic controls on their distribution, rather than how the biology interacts with its physical habitat. As an outcome of two recent rock coast biogeomorphology projects (detailed at: www.biogeomorph.org/coastal) a multi disciplinary team produced the first known guide to understanding how biogeomorphological processes help create coastal landforms. The ‘Shore Shapers’ guide (shoreshapers.org) is designed to: a. bring biotic geomorphic interactions (how animals, algae and microorganisms protect and shape rock) to life and b. introduce some of the geomorphological and geological controls on biogeomorphic processes and landform development. The guide provides scientific information in an accessible and interactive way – to help sustain children’s interest and extend their learning. We tested a draft version of the guide with children,the general public and volunteers on rocky shore rambles using social science techniques and present the findings, alongside initial results of an evaluation of a newer version of the guide and interactive workshops taking place throughout 2014.

Scheduling and Platforming Trains at Busy Complex Stations

We consider the problem of train planning or scheduling for large, busy, complex train stations, which are common in Europe and elsewhere, though not in North America. We develop the constraints and objectives for this problem, but these are too computationally complex to solve by standard combinatorial search or integer programming methods. Also, the problem is somewhat political in nature, that is, it does not have a clear objective function because it involves multiple train operators with conflicting interests. We therefore develop scheduling heuristics analogous to those successfully adopted by train planners using ''manual'' methods. We tested the model and algorithms by applying to a typical large station that exhibits most of the complexities found in practice. The results compare well with those found by traditional methods, and take account of cost and preference trade-offs not handled by those methods. With successive refinements, the algorithm eventually took only a few seconds to run, the time depending on the version of the algorithm and the scheduling problem. The scheduling models and algorithms developed and tested here can be used on their own, or as key components for a more general system for train scheduling for a rail line or network.Train scheduling for a busy station includes ensuring that there are no conflicts between several hundred trains per day going in and out of the station on intersecting paths from multiple in-lines and out-lines to multiple platforms, while ensuring that each train is allowed at least its minimum required headways, dwell time, turnaround time and trip time. This has to be done while minimizing (costs of) deviations from desired times, platforms or lines, allowing for conflicts due to through-platforms, dead-end platforms, multiple sub-platforms, and possible constraints due to infrastructure, safety or business policy.

B-type supergiants in the SMC: Chemical compositions and comparison of static and unified models

High-resolution UCLES/AAT spectra are presented for nine B-type supergiants in the SMC, chosen on the basis that they may show varying amounts of nuclear-synthetically processed material mixed to their surface. These spectra have been analysed using a new grid of approximately 12 000 non-LTE line blanketed tlusty model atmospheres to estimate atmospheric parameters and chemical composition. The abundance estimates for O, Mg and Si are in excellent agreement with those deduced from other studies, whilst the low estimate for C may reflect the use of the C II doublet at 4267 Å. The N estimates are approximately an order of magnitude greater than those found in unevolved B-type stars or H II regions but are consistent with the other estimates in AB-type supergiants. These results have been combined with results from a unified model atmosphere analysis of UVES/VLT spectra of B-type supergiants (Trundle et al. 2004, A&A, 417, 217) to discuss the evolutionary status of these objects. For two stars that are in common with those discussed by Trundle et al., we have undertaken a careful comparison in order to try to understand the relative importance of the different uncertainties present in such analyses, including observational errors and the use of static or unified models. We find that even for these relatively luminous supergiants, tlusty models yield atmospheric parameters and chemical compositions similar to those deduced from the unified code fastwind.

Synthesis, characterization and temperature studies on the conductivity of AlCl−4 ion doped polypyrrole

Synthesis of free standing conducting polypyrrole film using room temperature melt as the electrolyte is reported. We also report variation in the contribution of ionic conductance with temperature of the polymer film by four probe method and electrochemical properties like diffusion coefficient and ionic mobility of AlCl-4 doped polypyrrole film. An attempt has been made to arrive at the stability of charge carrier concentration over a temperature range of 295 to 350 K under vacuum. The film was characterized by optical techniques and scanning electron micrography.

SO and CS observations of molecular clouds - II. Analysis and modelling of the abundance ratios - probing O-2/CO with SO/CS?

We here analyse the observational SO and CS data presented in Nilsson ct al. (2000). The SO/CS integrated intensity ratio maps are presented for 19 molecular clouds, together with tables of relevant ratios at strategic positions, where we have also observed (SO)-S-34 and/or (CS)-S-34. The SO/CS abundance ratio as calculated from an LTE analysis is highly varying within and between the sources. Our isotopomer observations and Monte Carlo simulations verify that this is not an artifact due to optical depth problems. The variation of the maximum SO/CS abundance ratio between the clouds is 0.2-7. The largest variations within a cloud are found for the most nearby objects, possibly indicating resolution effects. We have also performed time dependent chemical simulations. We compare the simulations with our observed SO/CS abundance ratios and suggest a varying oxygen to carbon initial abundance, differing temporal evolution, density differences and X-ray sources associated with young stellar objects as possible explanations to the variations. In particular, the observed variation of the maximum SO/CS abundance ratio between the clouds can be explained by using initial O/C+ abundance ratios in the range 1.3-2.5. We finally derive a relationship between the SO/CS and O-2/CO abundance ratios, which may be used as a guide to find the most promising interstellar O-2 search targets.

Semi-formal Models to Support Program Development: Autonomic Management within Component Based Parallel and Distributed Programming

Functional and non-functional concerns require different programming effort, different techniques and different methodologies when attempting to program efficient parallel/distributed applications. In this work we present a "programmer oriented" methodology based on formal tools that permits reasoning about parallel/distributed program development and refinement. The proposed methodology is semi-formal in that it does not require the exploitation of highly formal tools and techniques, while providing a palatable and effective support to programmers developing parallel/distributed applications, in particular when handling non-functional concerns.

And He Opened His Mouth and Taught Them Saying

This paper provides an overview of rich biblical imagery related to the mouth, built around the conceptual metaphor MOUTH IS AN OPENING, followed by a critical analysis of four text units from both Testaments employing the basic extensions of this metaphor in the renderings of twelve contemporary English versions of the Bible. It is demonstrated that the meaningful choice of translating techniques and the type of equivalence pursued in translation must be based on a thorough examination and comparison of the conceptual systems of the source and target languages.