A high cell count cascade full bridge converter for wide bandwidth ultrasonic transducer excitation

A nine level modular multilevel cascade converter (MMCC) based on four full bridge cells is shown driving a piezoelectric ultrasonic transducer at 71 and 39 kHz, in simulation and experimentally. The modular cells are small stackable PCBs, each with two fully integrated surface mount 22 V, 40 A MOSFET half-bridge converters, and include all control signal and power isolation. In this work, the bridges operate at 12 V and 384 kHz, to deliver a 96 Vpp 9 level waveform with an effective switching frequency of 3 MHz. A 9 pH air cored inductor forms a low pass filter in conjunction with the 3000 pF capacitance of the transducer load. Eight equally phase-displaced naturally sampled pulse width modulation (PWM) drive signals, along with the modulating sinusoid, are generated using phase accumulation techniques in a dedicated FPGA. Experimental time domain and FFT plots of the multilevel and transducer output waveforms are presented and discussed.

What predicts mental health in midlife and older women? Results from the Australian Healthy Aging of Women Study

Objectives: Previous research has linked unhealthy lifestyle with a range of negative health outcomes in women. As women age however, they may have fewer performance expectations, but may view their health more positively. Clearly, the experiences of midlife and older women in relation to health and wellbeing need further exploration. The purpose of this study is to examine the factors associated with poor health-related quality of life in midlife (HRQoL) and older Australian women. Methods: The Australian longitudinal Healthy Aging of Women (HOW) study prospectively examines HRQoL, chronic disease and modifiable lifestyle factors midlife and older women as they age. Random sampling was used to select rural and urban based women from South-East Queensland, Australia. Data were collected from 386 women at three time points over the last decade (2001, 2004 and 2011). Results: The average age of women in this study was 65 years (SD = 2.82). Almost three-quarters (73%, n = 248) of the sample were married or living as though married, nine per cent (n = 30) were separated or divorced and a small proportion were had never married (n = 13). Most (86%, n = 291) of the women sample reported being Australian born, around one quarter (34%, n = 114) had completed additional study since leaving school (university degree or diploma). Over half (55%, n = 186) of participants were retired, one quarter (25%, n = 85) were in paid employment and the remained were unemployed (1%, n = 4), unable to work because of illness (2%, n = 6) or worked within the home (17%, n = 56). Using data collected over time we examined the relationship between a range of modifiable lifestyle factors and mental health using structural equation modelling. The overall model exhibited a good fit with the data. Poor sleep quality was associated with reduced mental health while better mental health was reported in women who exercised regularly and satisfied with their currently weight. As hypothesized, past mental health was a significant mediator of current mental health. Conclusions: These findings demonstrate that the mental health of women is complex and needs to be understood not only in terms of current lifestyle but also in relation to previously reported health status.

Productive inefficiency analysis and toxic chemical substances in US and Japanese manufacturing sectors

Corporate social responsibility is imperative for manufacturing companies to achieve sustainable development. Under a strong environmental information disclosure system, polluting companies are disadvantaged in terms of market competitiveness, because they lack an environmentally friendly image. The objective of this study is to analyze productive inefficiency change in relation to toxic chemical substance emissions for the United States and Japan and their corresponding policies. We apply the weighted Russell directional distance model to measure companies productive inefficiency, which represents their production technology. The data encompass 330 US manufacturing firms observed from 1999 to 2007, and 466 Japanese manufacturing firms observed from 2001 to 2008. The article focuses on nine high-pollution industries (rubber and plastics; chemicals and allied products; paper and pulp; steel and non-ferrous metal; fabricated metal; industrial machinery; electrical products; transportation equipment; precision instruments) categorized into two industry groups: basic materials industries and processing and assembly industries. The results show that productive inefficiency decreased in all industrial sectors in the United States and Japan from 2001 to 2007. In particular, that of the electrical products industry decreased rapidly after 2002 for both countries, possibly because of the enforcement of strict environmental regulations for electrical products exported to European markets.

A novel dc-link voltage regulation method for single source hybrid multilevel inverters

This paper presents a novel dc-link voltage regulation technique for a hybrid inverter system formed by cascading two 3-level inverters. The two inverters are named as “bulk inverter” and “conditioning inverter”. For the hybrid system to act as a nine level inverter, conditioning inverter dc link voltage should be maintained at one third of the bulk inverter dc link voltage. Since the conditioning inverter is energized by two series connected capacitors, dc-link voltage regulation should be carried out by controlling the capacitor charging/discharging times. A detailed analysis of conditioning inverter capacitor charging/discharging process and a simplified general rule, derived from the analysis, are presented in this paper. Time domain simulations were carried out to demonstrate efficacy of the proposed method on regulating the conditioning inverter dc-link voltage under various operating conditions.

The pollution release and transfer register system in the U.S. and Japan : an analysis of productivity

This study analyzes Total Factor Productivity (TFP), which includes all categories of productivity. Our measure investigates productivity in the context of the provision and dissemination of environmental information policies. We investigated data on the emission of toxic chemical substances for the U.S. and Japanese manufacturing firms, including 386 firms for the period 1999-2007 and 466 firms for the period 2001-2008. The results show that productivity improved in all nine industrial sectors and that pollution levels were high in the U.S. and Japan from 2001 to 2007. In particular, the electronics industry improved rapidly after 2002 in both countries, which may be attributed to the enforcement of RoHS and the REACH directive in Europe. As a result of these stringent policies on toxic chemical emissions, the U.S. and Japanese firms, many of which export to the European market, have strong incentives to reduce their toxic chemical emissions.

A cascade multilevel STATCOM for wind generation systems

This paper presents a novel STATCOM configuration for voltage quality improvement in wind power generation systems. The proposed STATCOM is formed by cascading two 3-level inverters, `bulk inverter' and `conditioning inverter', through a coupling transformer. Both inverters are powered by dc-link capacitors and they are charged by a small amount of active power drawn from the grid. To minimize switching losses, the high power bulk inverter operates at low frequency while low power high frequency conditioning inverter is used to suppress harmonic content produced by the bulk inverter output. With only 24 switches this topology can synthesize a nine level inverter, if the dc-link voltage ratio is maintained at 3:1. Modulation and control techniques have been developed to meet this requirement. Reactive power of the STATCOM is controlled to mitigate voltage sags or swells caused by sudden wind changes. Simulation and experimental results are presented to verify the efficacy of the proposed modulation and control techniques used in the STATCOM.

The knowing client : a processual perspective on knowledge shaping in consulting engagements

This thesis extends current understanding in management consulting research by investigating the ways in which management consultants and their clients shaped knowing over the course of nine different consulting engagements. The research illuminates the client experience of using consulting knowledge in organisations, and proposes a theoretical reconceptualisation of knowledge shaping in consulting engagements which incorporates how the knowing client is enacted. The research shows that knowledge shaping activities are planned and enacted to support novelty reduction in consulting engagements; that asymmetries in the structuring of the consultant–client relationship hamper knowledge transformation and the establishment of knowing; and that understanding of how the role identities of consultants and clients are established and maintained over the course of an engagement is integral to understanding knowledge shaping in consulting engagements.

An experimental approach to air gap optimisation for a correction-less small field diode

Aim A recent Monte Carlo based study has shown that it is possible to design a diode that measures small field output factors equivalent to that in water. This is accomplished by placing an appropriate sized air gap above the silicon chip (1) with experimental results subsequently confirming that a particular Monte Carlo design was accurate (2). The aim of this work was to test if a new correction-less diode could be designed using an entirely experimental methodology. Method: All measurements were performed on a Varian iX at a depth of 5 cm, SSD of 95 cm and field sizes of 5, 6, 8, 10, 20 and 30 mm. Firstly, the experimental transfer of kq,clin,kq,msr from a commonly used diode detector (IBA, stereotactic field diode (SFD)) to another diode detector (Sun Nuclear, unshielded diode, (EDGEe)) was tested. These results were compared to Monte Carlo calculated values of the EDGEe. Secondly, the air gap above the EDGEe silicon chip was optimised empirically. Nine different air gap “tops” were placed above the EDGEe (air depth = 0.3, 0.6, 0.9 mm; air width = 3.06, 4.59, 6.13 mm). The sensitivity of the EDGEe was plotted as a function of air gap thickness for the field sizes measured. Results: The transfer of kq,clin,kq,msr from the SFD to the EDGEe was correct to within the simulation and measurement uncertainties. The EDGEe detector can be made “correction-less” for field sizes of 5 and 6 mm, but was ∼2% from being “correction-less” at field sizes of 8 and 10 mm. Conclusion Different materials will perturb small fields in different ways. A detector is only “correction-less” if all these perturbations happen to cancel out. Designing a “correction-less” diode is a complicated process, thus it is reasonable to expect that Monte Carlo simulations should play an important role.

Prevalence of asymptomatic malaria and bed net ownership and use in Bhutan, 2013 : a country earmarked for malaria elimination

Background With dwindling malaria cases in Bhutan in recent years, the government of Bhutan has made plans for malaria elimination by 2016. This study aimed to determine coverage, use and ownership of LLINs, as well as the prevalence of asymptomatic malaria at a single time-point, in four sub-districts of Bhutan. Methods A cross-sectional study was carried out in August 2013. Structured questionnaires were administered to a single respondent in each household (HH) in four sub-districts. Four members from 25 HH, randomly selected from each sub-district, were tested using rapid diagnostic tests (RDT) for asymptomatic Plasmodium falciparum and Plasmodium vivax infection. Multivariable logistic regression models were used to identify factors associated with LLIN use and maintenance. Results All blood samples from 380 participants tested negative for Plasmodium infections. A total of 1,223 HH (92.5% of total HH) were surveyed for LLIN coverage and use. Coverage of LLINs was 99.0% (1,203/1,223 HH). Factors associated with decreased odds of sleeping under a LLIN included: washing LLINs nine months compared to washing LLINs every six months; HH in the least poor compared to the most poor socio-economic quintile; a HH income of Nu 5,001-10,000 (US$1 = Nu 59.55), and Nu >10,000, compared to HH with income of

A comparative analysis of relevant crop carbon footprint calculators, with reference to cotton production in Australia

An increasing concern over the sustainability credentials of food and fiber crops require that farmers and their supply chain partners have access to appropriate and industry-friendly tools to be able to measure and improve the outcomes. This article focuses on one of the sustainability indicators, namely, greenhouse gas (GHG) emissions, and nine internationally accredited carbon footprint calculators were identified and compared on an outcomes basis against the same cropping data from a case study cotton farm. The purpose of this article is to identify the most “appropriate” methodology to be applied by cotton suppliers in this regard. From the analysis of the results, we subsequently propose a new integrated model as the basis for an internationally accredited carbon footprint tool for cotton and show how the model can be applied to evaluate the emission outcomes of different farming practices.

How can partnerships between the universities and schools exploit new opportunities for pedagogies at the intersection of the arts/design and the sciences?

Driven by information accessibility-on-demand provided by the internet, education modes are changing from a teacher-led approach focused on content delivery and assessible outcomes, to a learner-based approach encouraging self-directed, peer-tutored, and cooperative learning. New pedagogies are required to extend learning beyond the classroom and traditional subject areas such as contemporary arts, in alignment with the cross disciplinary priorities of the Australian Curriculum and values of the International Baccalaureate Organisation. This research explores how partnerships with universities and cultural organisations are implicated in the generation of these new forms of pedagogy and contribute to the field of educational research within the context of Education Queensland’s Framework For Gifted Education. In particular, this paper explores a new pedagogical framework for highly capable year five to nine Queensland state school students at the intersection of arts, design and the sciences, which has arisen from an explicit secondary/ tertiary partnership between the Queensland University of Technology Creative Industries Faculty and Precincts and the Queensland Academies Young Scholars Program. The Young Scholars Program offers experiences in the International Baccalaureate and Australian Curriculum contexts to enhance outcomes via global understanding, unique industry partnerships and 21st century pedagogical innovation based not on 'content' but tacit/experiential learning concepts including immersive, creative, intellectual and social strategies. These strategies for highly capable students are centred around authentic opportunities, primary resources, transdisciplinary learning and relationships with likeminded peers including tertiary arts, design and STEM educators and students, professionals and researchers. The presentation details case studies which are hands-on real time workshops involving inquiry based challenges in the arts, design and sciences, mathematics, history, creative writing and other disciplines, with content drawn from collections from public institutions, academic research and tertiary pedagogy. Both programs implicate student collaboration and creative production as methodology/data capture for ongoing action research, in alignment with the Framework For Gifted Education’s emphasis on evidence-based practices. They also challenge gifted students “to continue their development through curricular activities that require depth of study, complexity of thinking, fast pace of learning, high-level skills development and/or creative and critical thinking (e.g. through independent investigations, tiered tasks, diverse real-world applications, mentors)”(Education Queensland, 2011:3). This presentation highlights the strengths of the ongoing collaboration between QUT Creative industries Faculty and Queensland Academies, which not only provides successful extra curricular activities for gifted students towards a place in the International Baccalaureate Program, but also provides mentoring opportunities for tertiary students in their field of endeavor to assist with their own learning, and unique research opportunities for the Faculty as it focuses on excellence in arts, design and creative education and research. Education Queensland.(2011). Framework For Gifted Education Revised Edition 2011 (accessed Nov 19 2011)

Characterization of 67 mitochondrial tRNA gene rearrangements in the Hymenoptera suggests that mitochondrial tRNA gene position is selectively neutral

We present entire sequences of two hymenopteran mitochondrial genomes and the major portion of three others. We combined these data with nine previously sequenced hymenopteran mitochondrial genomes. This allowed us to infer and analyze the evolution of the 67 mitochondrial gene rearrangements so far found in this order. All of these involve tRNA genes, whereas four also involve larger (protein-coding or ribosomal RNA) genes. We find that the vast majority of mitochondrial gene rearrangements are independently derived. A maximum of four of these rearrangements represent shared, derived organizations, whereas three are convergently derived. The remaining mitochondrial gene rearrangements represent new mitochondrial genome organizations. These data are consistent with the proposal that there are an enormous number of alternative mitochondrial genome organizations possible and that mitochondrial genome organization is, for the most part, selectively neutral. Nevertheless, some mitochondrial genes appear less mobile than others. Genes close to the noncoding region are generally more mobile but only marginally so. Some mitochondrial genes rearrange in a pattern consistent with the duplication/random loss model, but more mitochondrial genes move in a pattern inconsistent with this model. An increased rate of mitochondrial gene rearrangement is not tightly associated with the evolution of parasitism. Although parasitic lineages tend to have more mitochondrial gene rearrangements than nonparasitic lineages, there are exceptions (e.g., Orussus and Schlettererius). It is likely that only a small proportion of the total number of mitochondrial gene rearrangements that have occurred during the evolution of the Hymenoptera have been sampled in the present study.

Actor 1 (Icecream Coles Polygon)

A sculpture made of polyurethane, epoxy resin, pigment and lacquer depicting a ice-cream melting into the form of a nine sided geometric figure.

Autotransporters of Escherichia coli : a sequence-based characterization

Autotransporter (AT) proteins are found in all Escherichia coli pathotypes and are often associated with virulence. In this study we took advantage of the large number of available E. coli genome sequences to perform an in-depth bioinformatic analysis of AT-encoding genes. Twenty-eight E. coli genome sequences were probed using an iterative approach, which revealed a total of 215 AT-encoding sequences that represented three major groups of distinct domain architecture: (i) serine protease AT proteins, (ii) trimeric AT adhesins and (iii) AIDA-I-type AT proteins. A number of subgroups were identified within each broad category, and most subgroups contained at least one characterized AT protein; however, seven subgroups contained no previously described proteins. The AIDA-I-type AT proteins represented the largest and most diverse group, with up to 16 subgroups identified from sequence-based comparisons. Nine of the AIDA-I-type AT protein subgroups contained at least one protein that possessed functional properties associated with aggregation and/or biofilm formation, suggesting a high degree of redundancy for this phenotype. The Ag43, YfaL/EhaC, EhaB/UpaC and UpaG subgroups were found in nearly all E. coli strains. Among the remaining subgroups, there was a tendency for AT proteins to be associated with individual E. coli pathotypes, suggesting that they contribute to tissue tropism or symptoms specific to different disease outcomes.

Haemoglobin adducts of acrylonitrile and ethylene oxide in acrylonitrile workers, dependent on polymorphisms of the glutathione transferases GSTT1 and GSTM1

Fifty-nine persons with industrial handling of low levels of acrylonitrile (AN) were studied. As part of a medical surveillance programme an extended haemoglobin adduct monitoring [N-(cyanoethyl)valine, CEV; N- (methyl)valine, MV; N-(hydroxyethyl)valine, HEV] was performed. Moreover, the genetic states of the polymorphic glutathione transferases GSTM1 and GSTT1 were assayed by polymerase chain reaction (PCR). Repetitive analyses of CEV and MV in subsequent years resulted in comparable values (means, 59.8 and 70.3 μg CEV/1 blood; 6.7 and 6.7 μg MV/1 blood). Hence, the industrial AN exposures were well below current official standards. Monitoring the haemoglobin adduct CEV appears as a suitable means of biomonitoring and medical surveillance under such exposure conditions. There was also no apparent correlation between the CEV and HEV or CEV and MV adduct levels. The MV and HEV values observed represented background levels, which apparently are not related to any occupational chemical exposure. There was no consistent effect of the genetic GSTM1 or GSTT1 state on CEV adduct levels induced by acrylonitrile exposure. Therefore, neither GSTM1 nor GSTT1 appears as a major AN metabolizing isoenzyme in humans. The low and physiological background levels of MV were also not influenced by the genetic GSTM1 state, but the MV adduct levels tended to be higher in GSTT1- individuals compared to GSTT1 + persons. With respect to the background levels of HEV adducts observed, there was no major influence of the GSTM1 state, but GST- individuals displayed adduct levels that were about 1/3 higher than those of GSTT1+ individuals. The coincidence with known differences in rates of background sister chromatid exchange between GSTT1- and GSTT1 + persons suggests that the lower ethylene oxide (EO) detoxification rate in GSTT1- persons, indicated by elevated blood protein hydroxyethyl adduct levels, leads to an increased genotoxic effect of the physiological EO background.