Effect of fertilization and type of pruning on quality of fresh and dehydrated Stevia rebaudiana

Mestrado em Engenharia Alimentar - Instituto Superior de Agronomia - UL

Experience of a Single Center in NTBC Use in Management of Hereditary Tyrosinemia Type I in Libya

Background: Hereditary Tyrosinemia type I (HTI) is a metabolic disease caused by deficiency of fumarylacetoacetate hydrolase enzyme. Objectives: This study reports beside its clinical and biochemical presentation, the outcome of NTBC [2- (2-nitro-4-trifloro-methylbenzoyl)-1, 3-cyclohexanedion] treatment of the disease and evaluates its biochemical markers in 16 pediatric Libyan patients. Patients and Methods: The diagnosis was based on presence of high tyrosine levels in blood and succinylacetone in urine. Results: The consanguinity rate was 81.2%, the median age at onset, at diagnosis and at starting treatment were 4.5, 8, and 9.5 months respectively. At presentation hepatomegaly, jaundice, rickets and high gamma glutamyl transferase (GGT) were observed in 87.5% of patients. All patients had extremely high alpha fetoprotein (AFP) and high alkaline phosphatase (ALP) levels. Fifteen patients were treated with NTBC, normalization of PT (Prothrombine time) was achieved in average in 14 days. The other biochemical parameters of liver function (transaminases, GGT, ALP, bilirubin and albumin) took longer to improve and several months to be normalized. Survival rate with NTBC was 86.6%. Patients who started treatment in a median of 3 months post onset observed a fast drop of AFP in 90.6% of patients (P = 0.003). Abnormal liver function and rickets were the common presentations, GGT was an early cholestatic sensitive test. ALP was constantly high even in asymptomatic patients. Conclusions: In HT1 a faster dropping of AFP is a marker of good prognosis.

Production of Syrah wines in tropical conditions of Northeast Brazil.

Twenty years ago, in the Northeast Brazil, a tropical semi-arid area, the production of tropical wines from some Vitis vinifera L. cultivars started. In this region, it is possible to harvest two times a year, between April and December, and nowadays Syrah is the most cultivated wine grape. Research works about irrigation rnanagement in Syrah started in 2000 at Brazilian Agricultural Research Corporation (Embrapa). The aim of this paper is to introduce some characteristics about the region where Syrah grapevines is being cultivated under irrigation in Northeast Brazil, and to present some results obtained from field experiments as well as some grape and wine charcteristics already determined.

Physiological response of American bullfrog tadpoles to stressor conditions of capture and hypoxia

A rã-touro americana (Rana catesbeiana) recentemente denominada Lithobates catesbeianus é cria da com propósito comercial em várias regiões do Brasil. Situações estressantes tais como problemas de manejo, criação inadequada e alterações ambientais com consequente redução da imunidade são comuns em produções intensivas. A avaliação destas situações de estresse permite-nos detectar estes probemas e diminuir as injurias causadas pelo confinamento. O principal objetivo deste estudo foi utilizar os marcadores biológicos de cortisol, glicemia e dados hematológicos para avaliar a resposta de girinos de rã-touro submetidos aos mecanismos estressores de captura e hipóxia. Os animais foram distribuídosem três tratamentos: estresse por captura individual com puçá; estresse por captura em massa com puçá e estresse por captura por escoamento. Os resultados obtidos demostraram não haver diferenças estatisticamente significativas entre os parametros avaliados quando comparou-se os grupos com e sem exposição ao ar (normoxia e hipoxia). Com base nestes resultados pode-se concluir que os estímulos estressores avaliados não foram adequados para alterar os valores plasmáticos dos marcadores biológicos testados. Para o cortisol, isto ocorreu provavelmente em virtude da ação sinérgica deste hormônio e a tiroxina, que induz a metamorfose nestes animais.

Contents and bioconversion of B-glycoside isoflavones to aglycones in the processing conditions of soybean tempeh.

The objective of this work was to evaluate the effect of the processing conditions of soybean tempeh on the contents of ??glycoside isoflavones and on their bioconversion into aglycones. Different times of soaking (6, 12, and 18 hours), cooking (15, 30, and 45 minutes), and fermentation (18, 24, and 30 hours) with Rhizopus oligosporus at 37°C were evaluated for tempeh preparation. Grains from the cultivar 'BRS 267' were used, and the experiment was carried out according to a central composite design (23). The response functions comprised the contents of genistin, malonyldaidzin, malonylgenistin, daidzein, and genistein, quantified by ultraperformance liquid chromatography (UPLC). Soaking, cooking, and fermentation times change the content, profile, and distribution of the different forms of isoflavones in tempeh. The highest bioconversion of glycoside isoflavones into aglycones occurred in 6?hour soaked soybean grains, whose cotyledons were cooked for 15 minutes and subjected to 18?hour fermentation. RESUMO:O objetivo deste trabalho foi avaliar o efeito das condições de processamento do tempeh de soja sobre o conteúdo de isoflavonas ??glicosídeos e sobre sua bioconversão em agliconas. Diferentes tempos de maceração (6, 12 e 18 horas), cozimento (15, 30 e 45 minutos) e fermentação (18, 24 e 30 horas) com Rhizopus oligosporus a 37°C foram avaliados na preparação do tempeh. Foram utilizados grãos da cultivar 'BRS 267', e o experimento foi realizado de acordo com um delineamento composto central (23). As funções?respostas compreenderam o teor de genistina, malonildaidzina, malonilgenistina, daidzeína e genisteína, quantificadas por cromatografia líquida de ultraeficiência (CLUE). Os tempos de maceração, cozimento e fermentação alteraram o conteúdo, o perfil e a distribuição das diferentes formas de isoflavonas no tempeh. A maior bioconversão de ??glicosídeos em agliconas ocorreu em grãos de soja macerados por 6 horas, cujos cotilédones foram cozidos por 15 minutos e submetidos à fermentação por 18 horas.

The infection of soybean leaves by Phakopsora pachyrhizi during conditions of discontinuous wetness.

The ability of Phakopsora pachyrhizi to cause infection under conditions of discontinuous wetness was investigated. In in vitro experiments, droplets of a uredospore suspension were deposited onto the surface of polystyrene. After an initial wetting period of either 1, 2 or 4 h, the drops were dried for different time intervals and then the wetness was restored for 11, 10 or 8 h. Germination and appressorium formation were evaluated. In in vivo experiments, soybean plants were inoculated with a uredospore suspension. Leaf wetness was interrupted for 1, 3 or 6 h after initial wetting periods of 1, 2 or 4 h. Then, the wetting was re-established for 11, 10 or 8 h, respectively. Rust severity was evaluated 14 days after inoculation. The germination of the spores and the formation of the appressoria on the soybean leaves after different periods of wetness were also quantified in vivo by scanning electron microscopy. P. pachyrhizi showed a high infective capacity during short periods of time. An interruption of wetness after 1 h caused average reductions in germination from 56 to 75% and in appressorium formation from 84 to 96%. Rust severity was lower in all of the in vivo treatments with discontinuous wetness when compared to the control plants. Rust severity was zero when the interruption of wetness occurred 4 h after the initial wetting. Wetting interruptions after 1 and 2 h reduced the average rust severity by 83 and 77%, respectively. The germination of the uredospores on the soybean leaves occurred after 2 h of wetness, with a maximum germination appearing after 4 h of wetness. Wetness interruption affected mainly the spores that had initiated the germination.

Metocean Climate Impact on the Fatigue Assessment of a Jacket-Type Offshore Platform

When the offshore oil and gas supplies exhaust, most offshore platforms are decommissioned and removed. The purpose of this paper is to evaluate the fatigue damage that will occur during the service life of a jacket-type offshore platform using different fatigue approaches in particular locations. The locations considered for this metocean climate impact study were Norway (North Sea), Portugal (Atlantic Ocean - Leixões) and Italy (Adriatic Sea). A finite element model was created by the means of Sesam and two different fatigue analysis, deterministic and spectral, were applied. For the fatigue assessment, an appropriate description of the site-specific wave environment, during the jacket platform service life, must be accomplished. This description is usually provided by a wave scatter diagram. Wave scatter diagrams usually represent the long-term wave environment during a (typical) year and are based on several years of site-specific data to ensure that they adequately represent the wave environment at the location of the structure. In this thesis, the comparison between these fatigue approaches will serve as a pilot study for planned reliability analysis in decommissioned offshore platforms in order to maximize the reuse of these platforms for future wind generation systems.

Computational design of a new type of sandwich cross-section for a defined solution of a tree-like column produced by wire-and-arc additive manufacturing

When it comes to designing a structure, architects and engineers want to join forces in order to create and build the most beautiful and efficient building. From finding new shapes and forms to optimizing the stability and the resistance, there is a constant link to be made between both professions. In architecture, there has always been a particular interest in creating new shapes and types of a structure inspired by many different fields, one of them being nature itself. In engineering, the selection of optimum has always dictated the way of thinking and designing structures. This mindset led through studies to the current best practices in construction. However, both disciplines were limited by the traditional manufacturing constraints at a certain point. Over the last decades, much progress was made from a technological point of view, allowing to go beyond today's manufacturing constraints. With the emergence of Wire-and-Arc Additive Manufacturing (WAAM) combined with Algorithmic-Aided Design (AAD), architects and engineers are offered new opportunities to merge architectural beauty and structural efficiency. Both technologies allow for exploring and building unusual and complex structural shapes in addition to a reduction of costs and environmental impacts. Through this study, the author wants to make use of previously mentioned technologies and assess their potential, first to design an aesthetically appreciated tree-like column with the idea of secondly proposing a new type of standardized and optimized sandwich cross-section to the construction industry. Parametric algorithms to model the dendriform column and the new sandwich cross-section are developed and presented in detail. A catalog draft of the latter and methods to establish it are then proposed and discussed. Finally, the buckling behavior of this latter is assessed considering standard steel and WAAM material properties.

Jeans modeling of massive early-type galaxies with observed stellar kinematic profiles up to 2-3 effective radii

A recent integral-field spectroscopic (IFS) survey, the MASSIVE survey (Ma et al. 2014), observed the 116 most massive (MK < −25.3 mag, stellar mass M∗ > 10^11.6 M⊙) early-type galaxies (ETGs) within 108 Mpc, out to radii as large as 40 kpc, that correspond to ∼ 2 − 3 effective radii (Re). One of the major findings of the MASSIVE survey is that the galaxy sample is split nearly equally among three groups showing three different velocity dispersion profiles σ(R) outer of a radius ∼ 5 kpc (falling, flat and rising with radius). The purpose of this thesis is to model the kinematic profiles of six ETGs included in the MASSIVE survey and representative of the three observed σ(R) shapes, with the aim of investigating their dynamical structure. Models for the chosen galaxies are built using the numerical code JASMINE (Posacki, Pellegrini, and Ciotti 2013). The code produces models of axisymmetric galaxies, based on the solution of the Jeans equations for a multicomponent gravitational potential (supermassive black hole, stars and dark matter halo). With the aim of having a good agreement between the kinematics obtained from the Jeans equations, and the observed σ and rotation velocity V of MASSIVE (Veale et al. 2016, 2018), I derived constraints on the dark matter distribution and orbital anisotropy. This work suggests a trend of the dark matter amount and distribution with the shape of the velocity dispersion profiles in the outer regions: the models of galaxies with flat or rising velocity dispersion profiles show higher dark matter fractions fDM both within 1 Re and 5 Re. Orbital anisotropy alone cannot account for the different observed trends of σ(R) and has a minor effect compared to variations of the mass profile. Galaxies with similar stellar mass M∗ that show different velocity dispersion profiles (from falling to rising) are successfully modelled with a variation of the halo mass Mh.

Qualidade de vida de portadores de Diabetes Mellitus tipo II frente às oscilações no nível de atividade física, aspectos socioeconômicos e presença de comorbidades

Universidade Estadual de Campinas . Faculdade de Educação Física

Otimização com restrições de complementaridade: algoritmos e aplicações

Tese de Doutoramento em Engenharia Industrial e de Sistemas (PDEIS)

On a regular convex solver potential for an elastic-damage constitutive model: a theoretical analysis

This work is related with the proposition of a so-called regular or convex solver potential to be used in numerical simulations involving a certain class of constitutive elastic-damage models. All the mathematical aspects involved are based on convex analysis, which is employed aiming a consistent variational formulation of the potential and its conjugate one. It is shown that the constitutive relations for the class of damage models here considered can be derived from the solver potentials by means of sub-differentials sets. The optimality conditions of the resulting minimisation problem represent in particular a linear complementarity problem. Finally, a simple example is present in order to illustrate the possible integration errors that can be generated when finite step analysis is performed. (C) 2003 Elsevier Ltd. All rights reserved.

Lyapounov stability for impulsive dynamical systems

This article addresses the problem of stability of impulsive control systems whose dynamics are given by measure driven differential inclusions. One important feature concerns the adopted solution which allows the consideration of systems whose singular dynamics do not satisfy the so-called Frobenius condition. After extending the conventional notion of control Lyapounov pair for impulsive systems, some stability conditions of the Lyapounov type are given. Some conclusions follow the outline of the proof of the main result.

Wireless sensor networks Zigbee applied on sewage treatment station

The good efficiency in a sewage treatment plant (WWTP) is a great importance to the environment. The management of electromechanical equipment installed in these stations is a major challenge due to the fact that they are installed on areas of difficult access and maintenance unhealthy and making the time for the correction of any faults is extended. This paper proposes the development of a Wireless Sensor Network (WSN), in order to monitor electromechanical equipment, allowing the Concessionaire a predictive control in real time. The design of a wireless sensors network for monitoring equipment requires not only the development and assembly of the sensor modules, but must also include the development of software for managing the data collected. Thus, this work includes a Zigbee WSN, small, adapted for monitoring of electromechanical equipment and environmental conditions of a WWTP, type stabilization pond, installed in an area of approximately 0.15 km 2 and the average flow of 320 liters of treatment per second. The experimental results show that this monitoring system can perform with the collection of parameters of performance and quality assessment at the station.