Development of In-Situ Detection Methods for Materials-Related Distress (MRD) in Concrete Pavements, July 2003

The purpose of this research was to summarize existing nondestructive test methods that have the potential to be used to detect materials-related distress (MRD) in concrete pavements. The various nondestructive test methods were then subjected to selection criteria that helped to reduce the size of the list so that specific techniques could be investigated in more detail. The main test methods that were determined to be applicable to this study included two stress-wave propagation techniques (impact-echo and spectral analysis of surface waves techniques), infrared thermography, ground penetrating radar (GPR), and visual inspection. The GPR technique was selected for a preliminary round of “proof of concept” trials. GPR surveys were carried out over a variety of portland cement concrete pavements for this study using two different systems. One of the systems was a state-of-the-art GPR system that allowed data to be collected at highway speeds. The other system was a less sophisticated system that was commercially available. Surveys conducted with both sets of equipment have produced test results capable of identifying subsurface distress in two of the three sites that exhibited internal cracking due to MRD. Both systems failed to detect distress in a single pavement that exhibited extensive cracking. Both systems correctly indicated that the control pavement exhibited negligible evidence of distress. The initial positive results presented here indicate that a more thorough study (incorporating refinements to the system, data collection, and analysis) is needed. Improvements in the results will be dependent upon defining the optimum number and arrangement of GPR antennas to detect the most common problems in Iowa pavements. In addition, refining highfrequency antenna response characteristics will be a crucial step toward providing an optimum GPR system for detecting materialsrelated distress.

Concrete Materials Storage, Mixing and Delivery, November 2004

Proper storage practices are critical to protect materials from intermingling, contamination, or degradation, and to maintain consistent aggregate gradation throughout a project. Concrete Paving Workforce Reference no.1

Regulated Materials Facility Revenue Bond Funds, Iowa State University of Science and Technology, Independent Auditor's Reports, Financial Statements, June 30, 2005

State University Audit Report

Metodologia del treball en neologia: criteris, materials i processos

L'Observatori de Neologia, dirigit per la Dra. M. Teresa Cabré, neix com a grup de recerca l'any 1988 a la Universitat de Barcelona i des de 1994 s'incorpora com a projecte a l'Institut Universitari de Lingüística Aplicada de la Universitat Pompeu Fabra. L'Observatori de Neologia analitza el fenomen de l'aparició de paraules noves o neologismes en l'ús, tant pel que fa al català com al castellà. Actualment compta amb una base de dades de més de 82.000 ocurrències per al català i de més de 60.000 ocurrències per al castellà procedents de textos escrits i orals de mitjans de comunicació.Aquest volum recull la metodologia establerta des de l’inici del projecte pels membres fundadors de l’Observatori de Neologia - tot i que revisada i actualitzada al llarg dels anys. Aquesta metodologia guia tots els treballs de detecció, selecció, tractament i emmagatzemament de les dades que es duen a terme a l’Observatori.

Wear of two artificial tooth materials in vivo: a 12-month pilot study.

STATEMENT OF PROBLEM: Wear of methacrylate artificial teeth resulting in vertical loss is a problem for both dentists and patients. PURPOSE: The purpose of this study was to quantify wear of artificial teeth in vivo and to relate it to subject and tooth variables. MATERIAL AND METHODS: Twenty-eight subjects treated with complete dentures received 2 artificial tooth materials (polymethyl methacrylate (PMMA)/double-cross linked PMMA fillers; 35%/59% (SR Antaris DCL, SR Postaris DCL); experimental 48%/46%). At baseline and after 12 months, impressions of the dentures were poured with improved stone. After laser scanning, the casts were superimposed and matched. Maximal vertical loss (mm) and volumetric loss (mm(3)) were calculated for each tooth and log-transformed to reduce variability. Volumetric loss was related to the occlusally active surface area. Linear mixed models were used to study the influence of the factors jaw, tooth, and material on adjusted (residual) wear values (alpha=.05). RESULTS: Due to drop outs (n=5) and unmatchable casts (n=3), 69% of all teeth were analyzed. Volumetric loss had a strong linear relationship to surface area (P<.001); this was less pronounced for vertical loss (P=.004). The factor showing the highest influence was the subject. Wear was tooth dependent (increasing from incisors to molars). However, these differences diminished once the wear rates were adjusted for occlusal area, and only a few remained significant (anterior versus posterior maxillary teeth). Another influencing factor was the age of the subject. CONCLUSIONS: Clinical wear of artificial teeth is higher than previously measured or expected. The presented method of analyzing wear of artificial teeth using a laser-scanning device seemed suitable.

Evolution in structured populations

Cet article est un compte-rendu du colloque "Evolution in Structured Population", tenu du 14 au 16 Septembre 1994 à l'Université de Lausanne. Consacré aux causes écologiques et conséquences évolutives d'horizons divers (zoologie, botanique, anthropologie, mathématiques), utilisant des approches variées, aussi bien empiriques que théoriques. Plusieurs exemples concrets de structurations génétiques de populations naturelles ont été documentés, et leurs causes analysées. Celles-ci sont variées, certaines étant extrinsèques à la biologie des espèces concernées (distances géographique, barrières écologiques, etc), d'autres intrinsèques (stratégies de reproduction, mutations chromosomiques). Les outils quantitatifs les plus largement utilisés pour analyser ces structures restent les F-statistiques de Whright; elles ont néanmoins fait l'objet de plusieurs critiques: d'une part, elles n'exploitent pas toute l'information disponible (certains orateurs ont d'ailleurs proposé diverses améliorations dans ce sens); d'autre part, les hypothèses qui sous-tendent leur interprétation conventionelle (en particulier l'hypothèse de populations à l'équilibre) sont régulièrement violées. Plusieurs des travaux présentés se sont précisément intéressés aux situations de déséquilibre et à leurs conséquences sur la dynamique et l'évolution des populations. Parmi celles ci: l'effet d'extinctions démiques sur les stratégies de dispersion des organismes et la structure génétique de leurs métapopulations, l'inadéquation du modèle classique de métapopulation, dit modèle en île (les modèles de diffusion ou de "pas japonais" (stepping stone) semblent généralement préférables), et le rôle de la "viscosité" des populations, en particulier en relation avec la sélection de parentèle et l'évolution de structures sociales. Le rôle important d'événements historiques sur les structures actuelles a été souligné, notamment dans le cadre de contacts secondaires entre populations hautement différenciées, leur introgression possible et la biogéographie de taxons vicariants. Parmi les problèmes récurrents notés: l'identification de l'unité panmictique, l'échelle de mesure spatiale appropriée, et les difficulté d'estimation des taux de migration et de flux de gènes. Plusieurs auteurs ont relevé la nécessité d'études biologiques de détail: les structures génétiques n'ont d'intérêt que dans la mesure où elles peuvent être situées dans un contexte écologique et évolutif précis. Ce point a été largement illustré dans le cadre des realtions entre structures génétiques et stratégies de reproduction/dispersion.

Materials and Mix Optimization Procedures for PCC Pavements, March 2006

Severe environmental conditions, coupled with the routine use of deicing chemicals and increasing traffic volume, tend to place extreme demands on portland cement concrete (PCC) pavements. In most instances, engineers have been able to specify and build PCC pavements that met these challenges. However, there have also been reports of premature deterioration that could not be specifically attributed to a single cause. Modern concrete mixtures have evolved to become very complex chemical systems. The complexity can be attributed to both the number of ingredients used in any given mixture and the various types and sources of the ingredients supplied to any given project. Local environmental conditions can also influence the outcome of paving projects. This research project investigated important variables that impact the homogeneity and rheology of concrete mixtures. The project consisted of a field study and a laboratory study. The field study collected information from six different projects in Iowa. The information that was collected during the field study documented cementitious material properties, plastic concrete properties, and hardened concrete properties. The laboratory study was used to develop baseline mixture variability information for the field study. It also investigated plastic concrete properties using various new devices to evaluate rheology and mixing efficiency. In addition, the lab study evaluated a strategy for the optimization of mortar and concrete mixtures containing supplementary cementitious materials. The results of the field studies indicated that the quality management concrete (QMC) mixtures being placed in the state generally exhibited good uniformity and good to excellent workability. Hardened concrete properties (compressive strength and hardened air content) were also satisfactory. The uniformity of the raw cementitious materials that were used on the projects could not be monitored as closely as was desired by the investigators; however, the information that was gathered indicated that the bulk chemical composition of most materials streams was reasonably uniform. Specific minerals phases in the cementitious materials were less uniform than the bulk chemical composition. The results of the laboratory study indicated that ternary mixtures show significant promise for improving the performance of concrete mixtures. The lab study also verified the results from prior projects that have indicated that bassanite is typically the major sulfate phase that is present in Iowa cements. This causes the cements to exhibit premature stiffening problems (false set) in laboratory testing. Fly ash helps to reduce the impact of premature stiffening because it behaves like a low-range water reducer in most instances. The premature stiffening problem can also be alleviated by increasing the water–cement ratio of the mixture and providing a remix cycle for the mixture.

Regulated Materials Facility Revenue Bond Funds, Iowa State University of Science and Technology, Independent Auditor's Report, Basic Financial Statement and Supplementary Information, June 30, 2006

State University Audit Report

Cumulative cultural dynamics and the coevolution of cultural innovation and transmission: an ESS model for panmictic and structured populations.

When individuals in a population can acquire traits through learning, each individual may express a certain number of distinct cultural traits. These traits may have been either invented by the individual himself or acquired from others in the population. Here, we develop a game theoretic model for the accumulation of cultural traits through individual and social learning. We explore how the rates of innovation, decay, and transmission of cultural traits affect the evolutionary stable (ES) levels of individual and social learning and the number of cultural traits expressed by an individual when cultural dynamics are at a steady-state. We explore the evolution of these phenotypes in both panmictic and structured population settings. Our results suggest that in panmictic populations, the ES level of learning and number of traits tend to be independent of the social transmission rate of cultural traits and is mainly affected by the innovation and decay rates. By contrast, in structured populations, where interactions occur between relatives, the ES level of learning and the number of traits per individual can be increased (relative to the panmictic case) and may then markedly depend on the transmission rate of cultural traits. This suggests that kin selection may be one additional solution to Rogers's paradox of nonadaptive culture.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Integrated Materials and Construction Practice for Concrete Pavement: A State-of-the-Practice Manual, 2006

At the heart of all concrete pavement projects is the concrete itself. This manual is intended as both a training tool and a reference to help concrete paving engineers, quality control personnel, specifiers, contractors, suppliers, technicians, and tradespeople bridge the gap between recent research and practice regarding optimizing the performance of concrete for pavements. Specifically, it will help readers do the following:

Family Health Strategy professionals' view on the effects of Hansen's disease training

OBJECTIVEEvaluating how professionals of family health teams from three municipalities of Pernambuco perceive and interpret the effects of Hansen's disease training.METHODSA qualitative study using the perspective of Habermas. Six focus groups, totaling 33 nurses and 22 doctors were formed. The guide consisted of: reactions to training, learning, transfer of knowledge and organizational results.RESULTSThere were recurrent positive opinions on instructor performance, course materials, and an alert attitude to the occurrence of cases; the negative points were about lack of practical teaching, a lot of information in a short period of time and little emphasis on basic content. Low perceived self-efficacy and low locus of control, ambiguity, conflict of skills and the lack of support for the learning application. Nurses showed greater dissatisfaction with the organizational support.CONCLUSIONThe low effectiveness of training reveals the need to negotiate structured training from work problematization, considering performance conditions.

Audit of the Regulated Materials Facility Revenue Bond Funds of Iowa State University of Science and Technology (Iowa State University) as of and for the year ended June 30, 2007

Audit of the Regulated Materials Facility Revenue Bond Funds of Iowa State University of Science and Technology (Iowa State University) as of and for the year ended June 30, 2007

Report of the Regulated Materials Facility Revenue Bond Funds of Iowa State University of Science and Technology as of and for the year ended June 30, 2008

Report of the Regulated Materials Facility Revenue Bond Funds of Iowa State University of Science and Technology as of and for the year ended June 30, 2008