908 resultados para NONAQUEOUS MEDIUM
Resumo:
Nickel, a component of stainless steels (SS) applied in orthopedic implants may cause allergic processes in human tissues P558 nickel free SS was studied to verify its viability as a substitute for stainless steel containing nickel Its performance is compared to ISO 5832-9 and F138 most used nowadays grades in implants fabrications, in minimum essential medium. MEM, at 37 degrees C. Potentiodynamic polarization curves, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and ""in vitro"" cytotoxicity were used as techniques. From the electrochemical point of view P558 SS is comparable to ISO 5832-9 SS in MEM It remains passivated until the transpassivation potential, above which generalized corrosion occurs F138 presents pitting corrosion at 370 mV/SCE. The cytotoxicity results showed that P558. ISO 5832-9 and F138 do not present cytotoxic character Therefore, these results suggest that P558 SS can be applied in orthopedic implants (C) 2010 Elsevier BV All rights reserved
Resumo:
Metal cation toxicity to basidiomycete fungi is poorly understood, despite its well-known importance in terrestrial ecosystems. Moreover, there is no reported methodology for the routine evaluation of metal toxicity to basidiomycetes. In the present study, we describe the development of a procedure to assess the acute toxicity of metal cations (Na(+), K(+), Li(+), Ca(2+), Mg(2+), Co(2+), Zn(2+), Ni(2+), Mn(2+), Cd(2+), and Cu(2+)) to the bioluminescent basidiomycete fungus Gerronema viridilucens. The method is based on the decrease in the intensity of bioluminescence resulting from injuries sustained by the fungus mycelium exposed to either essential or nonessential metal toxicants. The assay described herein enables LIS to propose a metal toxicity series to Gerronenia viridilucens based on data obtained from the bioluminescence intensity (median effective concentration [EC50] values) versus metal concentration: Cd(2+) > Cu(2+) > Mn(2+) approximate to Ni(2+) approximate to Co(2+) > Zn(2+) > Mg(2+) > Li(+) > K(+) approximate to Na(+) > Ca(2+), and to shed some li-ht on the mechanism of toxic action of metal cations to basidiomycete fungi. Environ. Toxicol. Chem. 2010;29:320-326. (C) 2009 SETAC
Resumo:
Electrodeposition of bismuth on gold microelectrodes for determination of Pb(II) by square wave anodic stripping voltammetry (SWASV) was accomplished by an in situ procedure in alkaline solution. A linear calibration plot for Pb(II) in the concentration range 40 to 6700 nmol L(-1) (r=0.998) was obtained, the detection limit was found to be 12.5 nmol L(-1) (S/N = 3) and the relative standard deviation in Solutions containing 1 mu mol L(-1) Pb(II) was 4% (n = 12). The analytical performance of the proposed sensor wits tested by measuring the Pb(II) concentration in a wine sample. The result Was in good agreement with the one obtained by GFAAS.
Resumo:
Although alkyl carbonic acids (ACAs) and their salts are referred to as instable species in aqueous medium, we demonstrate that a monoalkyl carbonate (MAC) can in fact be easily formed from bicarbonate and an alcohol even in the presence of a high amount of water. A CE system with two capacitively coupled contactless conductivity detectors (C(4)Ds) was used to obtain different parameters about these species and their reactions. Based on the mobilities obtained for a series of alcohols ranging from 1 to 5 carbons, the coefficients of diffusion and the hydrodynamic radii were calculated. When compared with the equivalent carboxylates, MACs have radii systematically smaller. Although the precise pK(a) values of the ACAs could not be obtained, because of the fast decomposition in acid medium, it was possible, for the first time, to show that they are below 4.0. This result suggests that the acidity of an ACA is quite similar to the first hydrogen of H(2)CO(3). Using a new approach to indirectly calibrate the C(4)D, the kinetic constants and the equilibrium constants of formation were also obtained. The results suggest that the increase in the chain length makes the MACs less stable and more inert.
Resumo:
Scanning electrochemical microscopy (SECM) in feedback mode was employed to characterise the reactivity and microscopic peculiarities of bismuth and bismuth/lead alloys plated onto gold disk substrates in 0.1 molL(-1) NaOH solutions. Methyl viologen was used as redox mediator, while a platinum microelectrode was employed as the SECM tip. The metal films were electrodeposited ex situ from NaOH solutions containing either bismuth ions only or both bismuth and lead ions. Approach curves and SECM images indicated that the metal films were conductive and locally reactive with oxygen to provide Bi(3+) and Pb(2+) ions. The occurrence of the latter chemical reactions was verified by local anodic stripping voltammetry (ASV) at the substrate solution interface by using a mercury-coated platinum SECM tip. The latter types of measurements allowed also verifying that lead was not uniformly distributed onto the bismuth film electrode substrate. These findings were confirmed by scanning electron microscopy images. The surface heterogeneity produced during the metal deposition process, however, did not affect the analytical performance of the bismuth coated gold electrode in anodic stripping voltammetry for the determination of lead in alkaline media, even in aerated aqueous solutions. Under the latter conditions, stripping peak currents proportional to lead concentration with a satisfactory reproducibility (within 5% RSD) were obtained.
Resumo:
We have employed UV-vis spectroscopy in order to investigate details of the solvation of six solvatochromic indicators, hereafter designated as ""probes"", namely, 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl) phenolate (RB); 4-[(E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePM; 1-methylquinolinium-8-olate, QB; 2-bromo-4-[(E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePMBr, 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl) phenolate (WB); and 2,6-dibromo-4-[(E)-2-(1-methylpyridinium-4-yl)ethenyl] phenolate, MePMBr,, respectively. These can be divided into three pairs, each includes two probes of similar pK(a) in water and different lipophilicity. Solvation has been studied in binary mixtures, BMs, of water, W, with 12 protic organic solvents, S, including mono- and bifunctional alcohols (2-alkoxyethanoles, unsaturated and chlorinated alcohols). Each medium was treated as a mixture of S, W, and a complex solvent, S-W, formed by hydrogen bonding. Values of lambda(max) (of the probe intramolecular charge transfer) were converted into empirical polarity scales, E(T)(probe) in kcal/mol, whose values were correlated with the effective mole fraction of water in the medium, chi w(effective). This correlation furnished three equilibrium constants for the exchange of solvents in the probe solvation shell; phi(W/S) (W substitutes S): phi(S-W/W) (S-W substitutes W), and phi(S-W/S) (S-W substitutes S), respectively. The values of these constants depend on the physicochemical properties of the probe and the medium. We tested, for the first time, the applicability of a new solvation free energy relationship: phi = constant + a alpha(BM) + b beta(BM) + s(pi*(BM) + d delta) + p log P(BM), where a, b, s, and p are regression coefficients alpha(BM), beta(BM), and pi*(BM) are solvatochromic parameters of the BM, delta is a correction term for pi*, and log P is an empirical scale of lipophilicity. Correlations were carried out with two-, three-, and four-medium descriptors. In all cases, three descriptors gave satisfactory correlations; use of four parameters gave only a marginal increase of the goodness of fit. For phi(W/S), the most important descriptor was found to be the lipophilicity of the medium; for phi(S-W/W) and phi(S-W/S), solvent basicity is either statistically relevant or is the most important descriptor. These responses are different from those of E(T)(probe) of many solvatochromic indicators in pure solvents, where the importance of solvent basicity is usually marginal, and can be neglected.
Resumo:
This thesis presents English-medium instruction (EMI) in the Swedish context, focusing on perspectives and practices in two schools. The research question is as follows: How and why is EMI offered, chosen, and practiced in the Swedish upper secondary school today? The aim is to explore the status of the educational option, the reasons for offering EMI to stakeholders, the stakeholders’ beliefs about and goals of EMI, and the implementation of EMI in the classroom. A survey of all upper secondary schools in Sweden was conducted to ascertain the spread of content teaching through a foreign language. The educational context was studied from an ecological perspective using methods based in linguistic ethnography. Language alternation, academic language, and language hierarchy were all considered. Interviews were analysed for content; and classroom language use was analysed for language choice and function. The concepts of affordance and scaffolding together with translanguaging were key. The de facto policies of the micro contexts of the schools were examined in light of the declared national policy of the macro context of Sweden. The results indicate that the option in Swedish schools has not increased, and also tends to only be EMI—not Content and Language Integrated Learning (CLIL) or instruction through other languages. EMI is offered for prestige, an international profile, marketing potential and personal interest. EMI students are academically motivated and confident, and see the option as “fun”. 100% EMI in the lessons is not the goal or the practice. Translanguaging is abundant, but how language alternation is perceived as an affordance or not differs in the two schools. One focuses on how the languages are used while the other focuses on how much each language is used. In conclusion, the analysis suggests that a development of definitions and practices of EMI in Sweden is needed, especially in relation to language policy and language hierarchy.
Resumo:
A finalidade deste trabalho ´e apresentar uma revis˜ao da teoria do transporte de part´ıculas em meios compostos por uma mistura aleat´oria bin´aria. Para atingir este objetivo n´os apresentamos brevemente alguns conceitos b´asicos de teoria do transporte, e ent˜ao discutimos em detalhes a deriva¸c˜ao de duas abordagens desenvolvidas para a solu¸c˜ao de tais problemas: os modelos de mistura atˆomica e de Levermore-Pomraning. Providenciamos ainda, com o uso da formula¸c˜ao LTSN, compara ¸c˜oes num´ericas destes modelos com resultados de benchmark gerados atrav´es de um processo de Monte Carlo.
Resumo:
Neste trabalho, o mercado brasileiro de crédito para pequenas e médias empresas (PMEs) é analisado sob a perspectiva do marketing adaptativo, em que se assume que atividades mercadológicas como segmentação, gestão de relacionamento com clientes, apreçamento e desenvolvimento de produtos, são determinadas pela utilidade obtida por agentes de mercado ao atenderem a demanda. Identifica-se que a existência de assimetria de informações e de custos de transação limita e direciona as atividades de marketing no mercado estudado. A partir de uma amostra com 65.535 propostas de crédito, recebidas e avaliadas por um grande banco brasileiro entre janeiro de 2004 e setembro de 2006, estima-se a utilidade do banco em operações de crédito. Adicionalmente, 17.149 transações de empréstimos concedidos pelo banco ao segmento de pequenas empresas entre abril de 2006 e março de 2007, são investigadas. Finalmente, um conjunto de dados com 1,636 registros obtidos pela junção das bases de dados de propostas e de transações mencionados, é analisado em termos das relações entre taxas de juros e os totais de cobertura oferecidas por meio de garantias de crédito. Os resultados revelam a existência de um ambiente de marketing adaptativo, em que os pequenos tomadores de crédito produtivo são racionados, e aceitam pagar taxas de juros mais elevadas do que outros segmentos. Produtos de créditos baseados em garantias líquidas e com altas taxas de juros são desenvolvidos para suprir de maneira oportuna este segmento racionado de pequenas empresas. Ademais, a utilidade do banco em operações de crédito é afetada pela informação privada que captura ao longo de relacionamentos mantidos com seus cientes. Os resultados implicam que o sistema de marketing financeiro brasileiro não desempenha papel formativo no desenvolvimento econômico, que seria de fomento ao crédito produtivo por meio de empréstimos a baixo custo para pequenas e médias empresas. Um sistema formativo de marketing é improvável em um ambiente com informação imperfeita, como o mercado de crédito brasileiro. O estudo traz informações úteis àqueles interessados no desenvolvimento de mercados de crédito produtivo, tais como profissionais de instituições financeiras; agentes responsáveis por políticas públicas e monetárias de fomento ao crédito; e empreendedores de pequeno e médio porte que necessitem de financiamento externo para seus negócios.
Resumo:
Cultura organizacional e gestão de recursos humanos (GRH) são componentes fundamentais para a estratégia corporativa raramente estudada no contexto das pequenas e médias empresas (PME) no setor de serviços profissionais, um ambiente no qual o capital humano das empresas companhias é particularmente importante. Um estudo de caso de uma empresa de gestão de investimentos inglesa foi realizado. A PME quase triplicou o seu quadro de funcionários, de menos de 50 a mais de 140, nos últimos seis anos. Cultura e GRH foram pesquisadas tanto historicamente quanto no momento atual por meio de uma combinação de entrevistas individuais, observação direta durante as visitas ao local e análise documental. Foi verificado que a G RH (junto com um número de outras estruturas e processos internos) tornou-se mais formal, apesar do fato de que a empresa começou com políticas de RH relativamente desenvolvidas, em comparação com outras pequenas empresas. Uma possível explicação para esta estruturação das práticas de RH é que empresas do setor de serviços profissionais tendem a dar uma importância especial à qualidade da sua força de trabalho. Esta relativa estabilidade cultural pode ser explicada pelo fato da cultura ser forte e é mantida tanto inconscientemente quanto conscientemente, por meio de mecanismos como o planejamento de pessoal, recrutamento e remuneração. As conclusões, por conseguinte, demonstram que as atitudes e percepções nem sempre mudam tão rápido quanto sistemas organizacionais, e que a relação entre cultura e gestão de recursos humanos pode ser complexa; a formalização da GRH pode reforçar a mudança cultural em certos aspectos, ao mesmo tempo abrandá-lo em outros.
Resumo:
This thesis aims to open a theoretical discussion on the importance of cluster for the development of Small and Medium Enterprises. The methodology applied was based on bibliographical and qualitative research. The basic questions raised by this study can be summarized as follows: How the creation of a cluster will help in the development of the SME?. Consequently, the final objective of the work is to identify which are the characteristics that help into the success of a Small & Medium Enterprises inserted in a cluster. The answer to this question led the research to a better understanding of (i) the characterization of the Small & Medium Enterprises; (ii) the clusters theory; (iii) evidence for a developed (Italy) and a developing (Chile) country that support our proposition to verify. The main results confirm the relevance of the cluster for the development of the Small and Medium Enterprises because of the collective efficiency that generates, improving the funding conditions, the exporter capacity and diminishing the activities costs of the small companies that are part of the conglomerate.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)