Pilot study evaluating the effect of massage therapy on stress, anxiety and aggression in a young adult psychiatric inpatient unit

Objective: The aim of the present pilot study was to examine the effectiveness of a relaxation massage therapy programme in reducing stress, anxiety and aggression on a young adult psychiatric inpatient unit. Method: This was a prospective, non-randomized intervention study comparing treatment as usual (TAU) with TAU plus massage therapy intervention (MT) over consecutive 7 week blocks (May–August 2006). MT consisted of a 20 min massage therapy session offered daily to patients during their period of hospitalization. The Kennedy Nurses’ Observational Scale for Inpatient Evaluation (NOSIE), the Symptom Checklist-90–Revised (SCL-90-R), the State–Trait Anxiety Inventory (STAI) and stress hormone (saliva cortisol) levels were used to measure patient outcomes at admission and discharge from the unit. The Staff Observation Aggression Scale–Revised (SOAS-R) was used to monitor the frequency and severity of aggressive incidents on the unit. Results: There was a significant reduction in self-reported anxiety (p < 0.001), resting heart rate (p < 0.05) and cortisol levels (p < 0.05) immediately following the initial and final massage therapy sessions. Significant improvements in hostility (p = 0.007) and depression scores (p < 0.001) on the SCL-90-R were observed in both treatment groups. There was no group×time interaction on any of the measures. Poor reliability of staff-reported incidents on the SOAS-R limited the validity of results in this domain. Conclusions: Massage therapy had immediate beneficial effects on anxiety-related measures and may be a useful de-escalating tool for reducing stress and anxiety in acutely hospitalized psychiatric patients. Study limitations preclude any definite conclusions on the effect of massage therapy on aggressive incidents in an acute psychiatric setting. Randomized controlled trials are warranted.

Examining the role of wine brand love on brand loyalty: A multi-country comparison

This study develops and tests a model through a multi-country study that considers consumer wine knowledge and wine experience, wine brand trust and wine brand satisfaction as antecedents of wine brand love, and wine brand loyalty as a consequence of wine brand love. Data were collected in five wine-producing countries (Australia, Chile, France, Mexico and Portugal) with a final sample of 3462 completed surveys. Hypotheses were tested with structural equation modeling and the findings confirm the importance of brand love as both a mediator and direct influence on brand loyalty for wine consumers. Furthermore, brand satisfaction was positively and significantly related to brand love. In addition, wine experience, rather than wine knowledge, positively influenced brand trust and satisfaction. Finally, results also identify differences between countries thereby providing insights into how companies should focus their marketing strategies internationally.

Typologies and touchpoints: Designing multi-channel digital strategies

Purpose This study aims to gain a clearer understanding of digital channel design. The emergence of new technologies has revolutionised the way companies interact and engage with customers. The driver for this research was the suggestion that practitioners feel they do not possess the skills to understand and exploit new digital channel opportunities. To gain a clearer understanding of digital channel design, this paper addresses the research question: What digital channels do companies from a wide range of industries and sectors use? Design/methodology/approach A content analysis of 100 international companies was conducted with multiple data sources to form a typology of digital “touchpoints”. The appropriateness of a digital channel typology for this study was for developing rigorous and useful concepts for clarifying and refining the meaning of digital channels. Findings This study identifies what digital channels companies globally currently employ and explores the related needs across industries. A total of 34 digital touchpoints and 4 typologies of digital channels were identified across 16 industries. This research helps to identify the relationship between digital channels and enabling the connections with industry. Research limitations/implications The findings contribute to the growing research area of digital channels. The typology of digital channels is a useful starting point for developing a systematic, theory-based study for enabling the development of broader, comprehensive theories of digital channels. Practical implications Typologies and touchpoints are outlined in relation to industry, company objectives and customer needs to allow businesses to seize opportunities and optimise performance through individual touchpoints. A digital channel model as a key outcome of this research guides practitioners on what touchpoint to implement through an interrelated understanding of industry, company and customer needs. Originality/value This is the first paper to explore a range of industries in relation to their use of digital channels using a unique content analysis. Contributions include clarifying and refining digital channel meaning; identifying and refining the hierarchical relations among digital channels(typologies); and establishing typology and industry relationship model.

Turbulence and Mixing in the Environment: Multi-Device Study in a Sub-tropical Estuary

In an estuary, mixing and dispersion result from a combination of large-scale advection and smallscale turbulence, which are complex to estimate. The predictions of scalar transport and mixing are often inferred and rarely accurate, due to inadequate understanding of the contributions of these difference scales to estuarine recirculation. A multi-device field study was conducted in a small sub-tropical estuary under neap tide conditions with near-zero fresh water discharge for about 48 hours. During the study, acoustic Doppler velocimeters (ADV) were sampled at high frequency (50 Hz), while an acoustic Doppler current profiler (ADCP) and global positioning system (GPS) tracked drifters were used to obtain some lower frequency spatial distribution of the flow parameters within the estuary. The velocity measurements were complemented with some continuous measurement of water depth, conductivity, temperature and some other physiochemical parameters. Thorough quality control was carried out by implementation of relevant error removal filters on the individual data set to intercept spurious data. A triple decomposition (TD) technique was introduced to access the contributions of tides, resonance and ‘true’ turbulence in the flow field. The time series of mean flow measurements for both the ADCP and drifter were consistent with those of the mean ADV data when sampled within a similar spatial domain. The tidal scale fluctuation of velocity and water level were used to examine the response of the estuary to tidal inertial current. The channel exhibited a mixed type wave with a typical phase-lag between 0.035π– 0.116π. A striking feature of the ADV velocity data was the slow fluctuations, which exhibited large amplitudes of up to 50% of the tidal amplitude, particularly in slack waters. Such slow fluctuations were simultaneously observed in a number of physiochemical properties of the channel. The ensuing turbulence field showed some degree of anisotropy. For all ADV units, the horizontal turbulence ratio ranged between 0.4 and 0.9, and decreased towards the bed, while the vertical turbulence ratio was on average unity at z = 0.32 m and approximately 0.5 for the upper ADV (z = 0.55 m). The result of the statistical analysis suggested that the ebb phase turbulence field was dominated by eddies that evolved from ejection type process, while that of the flood phase contained mixed eddies with significant amount related to sweep type process. Over 65% of the skewness values fell within the range expected of a finite Gaussian distribution and the bulk of the excess kurtosis values (over 70%) fell within the range of -0.5 and +2. The TD technique described herein allowed the characterisation of a broader temporal scale of fluctuations of the high frequency data sampled within the durations of a few tidal cycles. The study provides characterisation of the ranges of fluctuation required for an accurate modelling of shallow water dispersion and mixing in a sub-tropical estuary.

Benefits and barriers to exercise in midlife women undertaking a web-based multi-modal lifestyle intervention for the primary prevention of chronic disease

Chronic diseases are a leading cause of death and disability, largely attributable to modifiable lifestyle risk factors. Many midlife Australian are getting insufficient physical activity for health and face a range of barriers to exercise. Results of this study provide evidence that benefits and barriers are an important predictor of exercise behaviour in midlife women and, that a 12 week nurse led health promotion program can effectively promote benefits and increase physical activity. This study provides evidence about benefits and barriers to exercise that will inform health promotion practice for chronic disease risk factor reduction in midlife women.

[Dense, subtropical, sustainable] the liveable multi-storey apartment building

This study examined the potential for apartment living to become more socially and environmentally acceptable in Australian society generally, and in subtropical cities particularly. Resolution of incongruities between residents' preferred attributes and other stakeholders' main interests has important implications for reshaping lifestyle expectations and design practice as society moves toward a post-carbon future.

Engaging nursing students in a bioscience unit using a web-based response system, GoSoapBox

Nursing students used GoSoapBox, a web-based student response system to poll responses to multiple choice questions (MCQs) presented during bioscience lectures. Participation in GoSoapBox appears to have facilitated student engagement, interaction and learning. The majority of students surveyed appreciated the immediate feedback to the student responses and being able to participate anonymously. The use of this tool facilitated collaborative group and class discussion and clarification around any misconceptions or challenging concepts. Information collected using GoSoapBox provided the academic with feedback allowing for reflection, adjustment and improvement in framing of formative and summative MCQs.

Facebook: A basis for forming a peer learning community for nursing students in a bioscience unit

First year nursing students commonly find bioscience to be challenging. A Facebook community site was established to support and engage these students. The site was facilitated by virtual peer mentors and the unit coordinator. The high participation rate and the strong recommendation to future students indicated that the site successfully enabled student interaction and engagement with their learning. The students found it to be a readily accessible network and valued the useful resources and learning strategies provided by their peers. The sharing of both learning challenges and successful learning practices can help students build a sense of belonging and an understanding of academic practices and behaviours that can contribute to their learning success at university.

Engaging nursing students in a bioscience unit using a web-based response system, GoSoapBox

Nursing students used GoSoapBox, a web-based student response system to poll responses to multiple choice questions (MCQs) presented during bioscience lectures. Participation in GoSoapBox appears to have facilitated student engagement, interaction and learning. The majority of students surveyed appreciated the immediate feedback to the student responses and being able to participate anonymously. The use of this tool facilitated collaborative group and class discussion and clarification around any misconceptions or challenging concepts. Information collected using GoSoapBox provided the academic with feedback allowing for reflection, adjustment and improvement in framing of formative and summative MCQs.

Reconstruction of a multi-vent kimberlite eruption from deposit and host rock characteristics: Jericho kimberlite, Nunavut, Canada

The Jericho kimberlite (173.1. ±. 1.3. Ma) is a small (~. 130. ×. 70. m), multi-vent system that preserves products from deep (>. 1. km?) portions of kimberlite vents. Pit mapping, drill core examination, petrographic study, image analysis of olivine crystals (grain size distributions and shape studies), and compositional and mineralogical studies, are used to reconstruct processes from near-surface magma ascent to kimberlite emplacement and alteration. The Jericho kimberlite formed by multiple eruptions through an Archean granodiorite batholith that was overlain by mid-Devonian limestones ~. 1. km in thickness. Kimberlite magma ascended through granodiorite basement by dyke propagation but ascended through limestone, at least in part, by locally brecciating the host rocks. After the first explosive breakthrough to surface, vent deepening and widening occurred by the erosive forces of the waxing phase of the eruption, by gravitationally induced failures as portions of the vent margins slid into the vent and, in the deeper portions of the vent (>. 1. km), by scaling, as thin slabs burst from the walls into the vent. At currently exposed levels, coherent kimberlite (CK) dykes (<. 40. cm thick) are found to the north and south of the vent complex and represent the earliest preserved in-situ products of Jericho magmatism. Timing of CK emplacement on the eastern side of the vent complex is unclear; some thick CK (15-20. m) may have been emplaced after the central vent was formed. Explosive eruptive products are preserved in four partially overlapping vents that are roughly aligned along strike with the coherent kimberlite dyke. The volcaniclastic kimberlite (VK) facies are massive and poorly sorted, with matrix- to clast-supported textures. The VK facies fragmented by dry, volatile-driven processes and were emplaced by eruption column collapse back into the volcanic vents. The first explosive products, poorly preserved because of partial destruction by later eruptions, are found in the central-east vent and were formed by eruption column collapse after the vent was largely cleared of country rock debris. The next active vent was either the north or south vent. Collapse of the eruption column, linked to a vent widening episode, resulted in coeval avalanching of pipe margin walls into the north vent, forming interstratified lenses of country rock-rich boulder breccias in finer-grained volcaniclastic kimberlite. South vent kimberlite has similar characteristics to kimberlite of the north vent and likely formed by similar processes. The final eruptive phase formed olivine-rich and moderately sorted deposits of the central vent. Better sorting is attributed to recycling of kimberlite debris by multiple eruptions through the unconsolidated volcaniclastic pile and associated collapse events. Post-emplacement alteration varies in intensity, but in all cases, has overprinted the primary groundmass and matrix, in CK and VK, respectively. Erosion has since removed all limestone cover.

Residents’ experiences of privacy and comfort in multi-storey apartment dwellings in subtropical Brisbane

Dwellings in multi-storey apartment buildings (MSAB) are predicted to increase dramatically as a proportion of housing stock in subtropical cities over coming decades. The problem of designing comfortable and healthy high-density residential environments and minimising energy consumption must be addressed urgently in subtropical cities globally. This paper explores private residents’ experiences of privacy and comfort and their perceptions of how well their apartment dwelling modulated the external environment in subtropical conditions through analysis of 636 survey responses and 24 interviews with residents of MSAB in inner urban neighbourhoods of Brisbane, Australia. The findings show that the availability of natural ventilation and outdoor private living spaces play important roles in resident perceptions of liveability in the subtropics where the climate is conducive to year round “outdoor living”. Residents valued choice with regard to climate control methods in their apartments. They overwhelmingly preferred natural ventilation to manage thermal comfort, and turned to the air-conditioner for limited periods, particularly when external conditions were too noisy. These findings provide a unique evidence base for reducing the environmental impact of MSAB and increasing the acceptability of apartment living, through incorporating residential attributes positioned around climate-responsive architecture.

Have you got what it takes? Nursing in a Psychiatric Intensive Care Unit

Purpose A Psychiatric Intensive Care Unit (PICU) and or High Dependency Unit (HDU) is a locked, intensive treatment facility available to people experiencing acute psychiatric distress. For many people who access public mental health services in Australia, the PICU/HDU is the primary point of admission, and should represent and facilitate timely assessment and an optimum treatment plan under a recovery framework. Nurses are the largest health discipline working in this specialty area of care. The paper aims to discuss these issues. Design/methodology/approach A qualitative study aimed to investigate the skills, experience, and practice, of nurses working in the PICU/HDU in relation to a recovery model of care. Identifying how nurses provide care in the PICU/HDU will inform a clinical practice guideline to further support this specialty area of care. Four focus groups were facilitated with 52 registered nurses attending. Findings The nurse participants identified specific skills under four distinct themes; Storytelling, Treatment and recovery, Taking responsibility, and Safeguarding. The skills highlight the expertise and clinical standard required to support a recovery model of care in the PICU. Research limitations/implications – The research findings highlight urgency for a National PICU/HDU clinical practice guideline. Practical implications A PICU/HDU practice guideline will promote the standard of nursing care required in the PICU/HDU. The PICU/HDU needs to be recognised as a patient centred, therapeutic opportunity as opposed to a restrictive and custodial clinical area. Social implications Providing transparency of practice in the PICU/HDU and educating nurses to this specialty area of care will improve client outcome and recovery. Originality/value Very few studies have explored the skills, experience, and practice, of nurses working in the PICU/HDU in relation to a recovery model of care. A dearth of research exists on what is required to work in this specialty area of care.

Multi-rotor with suspended load: System dynamics and control toolbox

There is an increasing demand for Unmanned Aerial Systems (UAS) to carry suspended loads as this can provide significant benefits to several applications in agriculture, law enforcement and construction. The load impact on the underlying system dynamics should not be neglected as significant feedback forces may be induced on the vehicle during certain flight manoeuvres. The constant variation in operating point induced by the slung load also causes conventional controllers to demand increased control effort. Much research has focused on standard multi-rotor position and attitude control with and without a slung load. However, predictive control schemes, such as Nonlinear Model Predictive Control (NMPC), have not yet been fully explored. To this end, we present a novel controller for safe and precise operation of multi-rotors with heavy slung load in three dimensions. The paper describes a System Dynamics and Control Simulation Toolbox for use with MATLAB/SIMULINK which includes a detailed simulation of the multi-rotor and slung load as well as a predictive controller to manage the nonlinear dynamics whilst accounting for system constraints. It is demonstrated that the controller simultaneously tracks specified waypoints and actively damps large slung load oscillations. A linear-quadratic regulator (LQR) is derived and control performance is compared. Results show the improved performance of the predictive controller for a larger flight envelope, including aggressive manoeuvres and large slung load displacements. The computational cost remains relatively small, amenable to practical implementations.

Impact of a stroke unit on length of hospital stay and in-hospital case fatality

Background and Purpose Randomized trials have demonstrated reduced morbidity and mortality with stroke unit care; however, the effect on length of stay, and hence the economic benefit, is less well-defined. In 2001, a multidisciplinary stroke unit was opened at our institution. We observed whether a stroke unit reduces length of stay and in-hospital case fatality when compared to admission to a general neurology/medical ward. Methods A retrospective study of 2 cohorts in the Foothills Medical Center in Calgary was conducted using administrative databases. We compared a cohort of stroke patients managed on general neurology/medical wards before 2001, with a similar cohort of stroke patients managed on a stroke unit after 2003. The length of stay was dichotomized after being centered to 7 days and the Charlson Index was dichotomized for analysis. Multivariable logistic regression was used to compare the length of stay and case fatality in 2 cohorts, adjusted for age, gender, and patient comorbid conditions defined by the Charlson Index. Results Average length of stay for patients on a stroke unit (n=2461) was 15 days vs 19 days for patients managed on general neurology/medical wards (n=1567). The proportion of patients with length of stay >7 days on general neurology/medical wards was 53.8% vs 44.4% on the stroke unit (difference 9.4%; P<0.0001). The adjusted odds of a length of stay >7 days was reduced by 30% (P<0.0001) on a stroke unit compared to general neurology/medical wards. Overall in-hospital case fatality was reduced by 4.5% with stroke unit care. Conclusions We observed a reduced length of stay and reduced in-hospital case-fatality in a stroke unit compared to general neurology/medical wards.

A hybrid of modified PSO and local search on a multi-robot search system

Particle swarm optimization (PSO), a new population based algorithm, has recently been used on multi-robot systems. Although this algorithm is applied to solve many optimization problems as well as multi-robot systems, it has some drawbacks when it is applied on multi-robot search systems to find a target in a search space containing big static obstacles. One of these defects is premature convergence. This means that one of the properties of basic PSO is that when particles are spread in a search space, as time increases they tend to converge in a small area. This shortcoming is also evident on a multi-robot search system, particularly when there are big static obstacles in the search space that prevent the robots from finding the target easily; therefore, as time increases, based on this property they converge to a small area that may not contain the target and become entrapped in that area.Another shortcoming is that basic PSO cannot guarantee the global convergence of the algorithm. In other words, initially particles explore different areas, but in some cases they are not good at exploiting promising areas, which will increase the search time.This study proposes a method based on the particle swarm optimization (PSO) technique on a multi-robot system to find a target in a search space containing big static obstacles. This method is not only able to overcome the premature convergence problem but also establishes an efficient balance between exploration and exploitation and guarantees global convergence, reducing the search time by combining with a local search method, such as A-star.To validate the effectiveness and usefulness of algorithms,a simulation environment has been developed for conducting simulation-based experiments in different scenarios and for reporting experimental results. These experimental results have demonstrated that the proposed method is able to overcome the premature convergence problem and guarantee global convergence.