Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

Policy instruments to improve energy efficiency in buildings

The newly adopted energy efficiency directive (2012/27/EU) highlights the importance of energy efficiency in reaching the Union’s 2020 targets. The directive commits member states to defining national energy efficiency targets (art. 3), achieving yearly energy savings of 1.5% of the annual energy sales through the energy efficiency obligation scheme (art. 7), and providing a long-term strategy for the building sector that aims at a 3% refurbishment rate for public buildings (art. 4+5). Buildings currently account for 40% of energy use in most countries, putting them among the largest end-use sectors. This report takes a closer look at the best practices for implementing increasing energy efficiency in different regions and countries in Europe. The final aim is to identify some policy tools to be suggested to the region of Dalarna (Dalarna having been chosen as the pilot county in Sweden) as a means of implementing energy efficiency in the building sector. The final objective is to give analysts and decision-makers a better analytical foundation to explore future policy development in the area of buildings to be proposed and tested at the regional level in Dalarna and later at the national level in Sweden.

AN APPROACH TO ILLUSTRATE STRATEGIES FOR IMPROVED ENERGY EFFICIENCY AT THE MUNICIPAL LEVEL

REESBE

Equity and Efficiency in Education: motivations and targets

The recently released "Educational PAC" attempts to place basic education at the center of the social debate. We have subsidized this debate, offering a diagnosis of how different education levels can impact individuals' lives through broad and easily interpreted indicators. Initially, we analyze how much each educational level reaches the poorest population. For example, how are those in the bottom strata of income distribution benefited by childcare centers, private secondary education, public university or adult education. The next step is to quantify the return of educational actions, such as their effects on employability and an individual's wages, and even health as perceived by the individual, be that individual poor, middle class or elite. The next part of the research presents evidence of how the main characters in education, aka mothers, fathers and children, regard education. The site available with the research presents a broad, user-friendly database, which will allow interested parties to answer their own questions relative to why people do not attend school, the time spent in the educational system and returns to education, which can all be cross-sectioned with a wide array of socio-demographic attributes (gender, income, etc.) and school characteristics (is it public, are school meals offered, etc.) to find answers to: why do young adults of a certain age not attend school? Why do they miss classes? How long is the school day? Aside from the whys and hows of teaching, the research calculates the amount of time spent in school, resulting from a combination between absence rates, evasion raters and length of the school day. The study presents ranks of indicators referring to objective and subjective aspects of education, such as the discussion of the advantages and care in establishing performance based incentives that aim at guiding the states in the race for better educational indicators.

Interim efficiency with MEU-preferences

Recently Kajii and (2008) proposed to characterize interim efficient allocations in an exchange economy under asymmetric information when uncertainty is represented by multiple posteriors. When agents have Bewley's incomplete preferences, Kajii and Ui (2008) proposed a necessary and sufficient condition on the set of posteriors. However, when agents have Gilboa--Schmeidler's MaxMin expected utility preferences, they only propose a sufficient condition. The objective of this paper is to complete Kajii and Ui's work by proposing a necessary and sufficient condition for interim efficiency for various models of ambiguity aversion and in particular MaxMin expected utility. Our proof is based on a direct application of some results proposed by Rigotti, Shannon and Stralecki (2008).

Sacrifice and efficiency of the income tax schedule

We investigate the efficiency of equal sacrifice tax schedules in an economy which primitives are exactly those in Mirrlees (1971): a continuum of individuals with identical preferences defined over consumption and leisure who differ with respect to their labor market productivity. Using a separable specification for preferences we derive the minimum equal sacrifice allocation and recover the tax schedule that implements it. The separable specification allows us to use the methodology developed by Werning (2007b) to check whether the schedule is efficient, that is, whether there is no alternative tax schedule that raises more revenue while delivering less utility to no one. We find that inefficiency does not arise for most parametrizations we use to approximate the US economy. For the few cases for which inefficiency does arise, it does so only for very high levels of income and marginal tax rates.

Lean management and innovation in operational efficiency: the EGR project implemented by Pirelli Tyre Brazil in Santo André plant

O trabalho tem como objetivo avaliar e descrever analiticamente a implementação de práticas de manufatura enxuta pela Pirelli Pneus no seu complexo industrial da América Latina. Além de uma descrição estruturada e ampla dos princípios de produção de Toyota e fundamentos teóricos do Lean thinking, uma ênfase especial será dedicada ao projeto EGR (Especialistas em Gestão da Rotina), como uma ferramenta estratégica para ser usada pela empresa multinacional italiana no futuro próximo, de modo a alcançar um resultado mais eficaz e eficiente na gestão da rotina diária. Este projeto, que representa um componente significativo do Pirelli Manufacturing System (PMS) e, principalmente, voltado para supervisores e gestores de plantas, consiste principalmente em ajudar a empresa a desenvolver a capacidade empresarial para avaliar corretamente o gap potencial existente entre os resultados atuais e os esperados, para tanto entender os desvios, bem como as causas subjacentes, e melhorar continuamente o desempenho da empresa por meio da padronização de processos e redução de desperdicios. Esses objetivos podem ser perseguidos, atuando em dois meios essenciais: habilidades técnicas e comportamentais de liderança para apoiar cada equipe de projeto; uma maior eficácia na gestão de indicadores de desempenho nas diferentes unidades de fábrica, de acordo com KPIs estabelecidos no nível central pelo Head Quarter. Além disso, a investigação será focada na experiência peculiar da planta de Santo André, onde o EGR começou como piloto, com o objetivo de captar as alterações relevantes (no lado organizacional e econômico) que este projeto trouxe para a empresa, através da realização de pesquisa de campo e entrevistas, que são orientados a recolher provas, considerações e opiniões de todos os principais atores envolvidos.

On the efficiency of equal sacrifice income tax schedules

In an economy which primitives are exactly those in Mirrlees (1971), we investigate the efficiency of labor income tax schedules derived under the equal sacrifice principle. Starting from a given government revenue level, we use Werning’s (2007b) approach to assess whether there is an alternative tax schedule to the one derived under the equal sacrifice principle that raises more revenue while delivering less utility to no one. For our preferred parametrizations of the problem we find that inefficiency only arises at very high levels of income. We also show how the multipliers of the Pareto problem may be extracted from the data and used to find the implicit marginal social weights associated with each level of income.