Stalagmite growth perturbations from the Kumaun Himalaya as potential earthquake recorders

The central part of the Himalaya (Kumaun and Garhwal Provinces of India) is noted for its prolonged seismic quiescence, and therefore, developing a longer-term time series of past earthquakes to understand their recurrence pattern in this segment assumes importance. In addition to direct observations of offsets in stratigraphic exposures or other proxies like paleoliquefaction, deformation preserved within stalagmites (speleothems) in karst system can be analyzed to obtain continuous millennial scale time series of earthquakes. The Central Indian Himalaya hosts natural caves between major active thrusts forming potential storehouses for paleoseismological records. Here, we present results from the limestone caves in the Kumaun Himalaya and discuss the implications of growth perturbations identified in the stalagmites as possible earthquake recorders. This article focuses on three stalagmites from the Dharamjali Cave located in the eastern Kumaun Himalaya, although two other caves, one of them located in the foothills, were also examined for their suitability. The growth anomalies in stalagmites include abrupt tilting or rotation of growth axes, growth termination, and breakage followed by regrowth. The U-Th age data from three specimens allow us to constrain the intervals of growth anomalies, and these were dated at 4273 +/- 410 years BP (2673-1853 BC), 2782 +/- 79 years BP (851-693 BC), 2498 +/- 117 years BP (605-371 BC), 1503 +/- 245 years BP (262-752 AD), 1346 +/- 101 years BP (563-765 AD), and 687 +/- 147 years BP (1176-1470 AD). The dates may correspond to the timings of major/great earthquakes in the region and the youngest event (1176-1470 AD) shows chronological correspondence with either one of the great medieval earthquakes (1050-1250 and 1259-1433 AD) evident from trench excavations across the Himalayan Frontal Thrust.

Domain structure of hard magnetic NdAlFeCo bulk metallic glass

Magnetic domain structure of hard magnetic Nd60Al10Fe20Co10 bulk metallic glass (BMG) has been studied by using magnetic force microscopy. In the magnetic force images it is shown that the exchange interaction type magnetic domains with a period of about 360 nm do exist in the BMG, which is believed to be associated with the appearance of hard-magnetic properties in this system. As the scale of the magnetic domain is much larger than the size of the short-range ordered atomic clusters existing in the BMG, it is believed that the large areas of magnetic contrast are actually a collection of a group of clusters aligned in parallel by strong exchange coupling interaction. After fully crystallization, the BMG exhibits paramagnetism. No obvious magnetic contrast is observed in the magnetic force images of fully crystallized samples, except for a small quantity of ferromagnetic crystalline phase with low coercivity and an average size of 900 nm.

High performance nanocomposite thin film transistors with bilayer carbon nanotube-polythiophene active channel by ink-jet printing

Nanocomposite thin film transistors (TFTs) based on nonpercolating networks of single-walled carbon nanotubes (CNTs) and polythiophene semiconductor [poly [5, 5′ -bis(3-dodecyl-2-thienyl)- 2, 2′ -bithiophene] (PQT-12)] thin film hosts are demonstrated by ink-jet printing. A systematic study on the effect of CNT loading on the transistor performance and channel morphology is conducted. With an appropriate loading of CNTs into the active channel, ink-jet printed composite transistors show an effective hole mobility of 0.23 cm 2 V-1 s-1, which is an enhancement of more than a factor of 7 over ink-jet printed pristine PQT-12 TFTs. In addition, these devices display reasonable on/off current ratio of 105-10 6, low off currents of the order of 10 pA, and a sharp subthreshold slope (<0.8 V dec-1). The work presented here furthers our understanding of the interaction between polythiophene polymers and nonpercolating CNTs, where the CNT density in the bilayer structure substantially influences the morphology and transistor performance of polythiophene. Therefore, optimized loading of ink-jet printed CNTs is crucial to achieve device performance enhancement. High performance ink-jet printed nanocomposite TFTs can present a promising alternative to organic TFTs in printed electronic applications, including displays, sensors, radio-frequency identification (RFID) tags, and disposable electronics. © 2009 American Institute of Physics.

A comparative study of plasma-enhanced chemical vapor gate dielectrics for solution-processed polymer thin-film transistor circuit integration

This paper considers plasma-enhanced chemical vapor deposited (PECVD) silicon nitride (SiNx) and silicon oxide (SiOx) as gate dielectrics for organic thin-film transistors (OTFTs), with solution-processed poly[5, 5′ -bis(3-dodecyl-2-thienyl)-2, 2′ -bithiophene] (PQT-12) as the active semiconductor layer. We examine transistors with SiNx films of varying composition deposited at 300 °C as well as 150 °C for plastic compatibility. The transistors show over 100% (two times) improvement in field-effect mobility as the silicon content in SiNx increases, with mobility (μFE) up to 0.14 cm2 /V s and on/off current ratio (ION / IOFF) of 108. With PECVD SiOx gate dielectric, preliminary devices exhibit a μFE of 0.4 cm2 /V s and ION / IOFF of 108. PQT-12 OTFTs with PECVD SiNx and SiOx gate dielectrics on flexible plastic substrates are also presented. These results demonstrate the viability of using PECVD SiN x and SiOx as gate dielectrics for OTFT circuit integration, where the low temperature and large area deposition capabilities of PECVD films are highly amenable to integration of OTFT circuits targeted for flexible and lightweight applications. © 2008 American Institute of Physics.

Domain structure of a Nd60Al10Fe20Co10 bulk metallic glass

Magnetic domain structure of Nd60Al10Fe20Co10 bulk metallic glass (BMG) has been studied by using magnetic-force microscopy. In the magnetic-force images it is shown that the exchange-interaction-type magnetic domains with a period of about 360 nm do exist in the BMG, which is believed to be associated with the appearance of hard-magnetic properties in this system. The existence of the large-scale domains demonstrates that the magnetic moments of a great deal of short-scale ordered atomic clusters in the BMG have been aligned by exchange coupling. Annealing at 715 K leads to partial crystallization of the BMG. However, the exchange coupling is stronger in the annealed sample, which is considered to arise from the increase of transition-metal concentration in the amorphous phase due to the precipitation of Nd crystalline phase.

Evaluación de producción de biomasa de Chloris gayana Kunth (Fine Cut) en la Cuenca del Salado

Resumen: El objetivo de este estudio fue evaluar el rendimiento de Chloris gayana Kunth (Grama Rhodes) cv. Fine Cut en relación con los rendimientos del campo natural. Este ensayo experimental se desarrolló en Verónica, Punta Indio, Provincia de Bs As. Las parcelas en donde se realizó el experimento fueron preparadas mediante labranza convencional. La siembra del cultivo se llevó a cabo el 4 Diciembre del 2009. Ésta se realizó en hileras distanciadas en 30cm y con una profundidad de 1cm. En cuanto al modelo experimental utilizado para la medición de biomasa de Chloris gayana Kunth cv. Fine Cut (con fertilización y sin fertilización), y de macollos, se utilizó un Diseño de Bloques al azar, (DBA), tomando como unidad elemental cada parcela con dos tratamientos. En el caso de la medición de biomasa de campo natural vs. Chloris gayana Kunth cv. Fine Cut no fertilizada se utilizó un Diseño Completamente Aleatorizado, (DCA), con tres repeticiones. Los datos obtenidos fueron analizados mediante un análisis de varianzas. El rendimiento de Chloris gayana superó al obtenido en el campo natural, (3548,44 Kg Ms ha‐1 vs. 8447,25 kg MS ha‐1 para campo natural y Chloris gayana, respectivamente). La aplicación de 75 kg de Nitrógeno incrementó la producción de Ch. gayana hasta los 14144,34 kg MS ha‐1. Estos rendimientos fueron obtenidos en un lapso de tiempo que va desde fines de diciembre del 2011 hasta mediados de abril del 2012 período en el cual se realizaron 4 cortes. En el cuarto año de producción (2012‐2013) la pastura no rebrotó, siendo las causas aparentes un anegamiento temporario junto con una posible helada que afectó su rebrote. Los datos recolectados sugieren que esta especie podría ser considerada como una alternativa interesante para el incremento de la producción primaria en este ambiente.

Ductile To Brittle Transition In Dynamic Fracture Of Brittle Bulk Metallic Glass

We report an unusual transition from a locally ductile to a pure brittle fracture in the dynamic fracture of brittle Mg65Cu20Gd10 bulk metallic glass. The fractographic evolution from a dimple structure to a periodic corrugation pattern and then to the mirror zone along the crack propagation direction during the dynamic fracture process is discussed within the framework of the meniscus instability of the fracture process zone. This work might provide an important clue in understanding of the energy dissipation mechanism for dynamic crack propagation in brittle glassy materials. (C) 2008 American Institute of Physics.

国产海上平台钢 E36-Z35焊接接头腐蚀疲劳的试验研究

本文对国产海上平台钢 E36 Z35板状焊接接头试件进行了常幅疲劳弯曲试验,结果表明在海水中自由腐蚀的平均疲劳寿命,约为空气中的1/2～1/3;只要寿命不很短,在阴极保护下,其寿命将大于海水中的自由腐蚀疲劳寿命,而且在低应力长寿命范围内,可以达到甚至超过空气中的疲劳寿命。试验表明,板厚增加,其疲劳强度将明显降低,根据试验数据,本文提出了厚度对疲劳强度和寿命的修正公式。试验得到的初步结论是,国产海上平台钢 E36-Z35,按我国焊接工艺规程制作的焊接接头,要比国外平台钢BS 4360、Grade 50D 的焊接接头好。此外,本文还讨论了应力比和加载频率对接头疲劳寿命的影响。

Evaluacion del contenido de carbono en los diferentes usos del suelo en la micro cuenca del río Pire, Condega, Estelí

Con la finalidad de evaluar la tasa de remoción de carbono atmosférico por sistemas agroforestales como una estrategia de mitigación y adaptación al cambio climático, en la micro cuenca rio Pire, en Condega se establecieron un total de 27 parcelas de muestreo permanente en tres fincas con los siguientes tratamientos : i) quema (Q), ii) manejo de rastrojo tradicional y mejorado (Rm), iv) quesungual tradicional (SAQt) y mejorado (SAQm), vi) pasto tradicional (Pt) y mejorado (Pm), viii) nuevas pasturas con buena cobertura de árboles (SSP) y ix) el bosque secundario (Bs). El carbono fue medido en árboles, hojarasca, necromasa y el almacenado en el suelo, por cada sistema evaluado. El estudio reporta un total de 46 especies arbóreas incluyendo las especies con diámetros mayores y menor es a 10 cm, representadas por 24 familias botánicas diferentes. Las familias más representativas son: Mimosaceae (7 especies), Caesalpinaceae (4 especies), Bignonaceae (3 especies). La remoción de carbono aéreo total a nivel de finca fueron 65.03, 58.29 y 45.33 MgC/ha para Don Isidro Lira, Javier Loza y Reynaldo Peralta respectivamente. El carbono removido por la vegetación a nivel de sistema indica que al cambiar de bosque a un sistema agroforestal con árboles, la remoción se ve reducida en un 40%, sin embargo cuando se cambia de bosque por un sistema sin árboles la remoción se reduce a un 72%. Los valores acumulados a nivel de tratamientos fueron 84.05, 70.49, 53.38, 49.33, 42.8, 41.15, 24.58, 24.21, y 22.85 MgC/ha para los tratamientos Bs, Pm, SAQt, SSP, SAQm, Pt, Rm, Rt, y la Quema respectivamente. Esto sugiere promover una agricultura y pasturas con presencia de árboles, por sus variados servicios eco sistémico brindado y entre los más importantes la alta tasa de remoción de carbono atmosférico comparado con sistemas tradicionales de siembras.

The catastrophic change of steady flow in collapsible tubes

Based on a general background we have developed a mechanical model of the catastrophic change of steady flow in collapsible tubes and got the critical conditions for the catastrophic change analyzing the effects of viscosity, gravity and the longitudinal gradient of external pressure. Several simple flows have been discussed. Furthermore, we conducted three types of model experiments, Results agree with the theoretical critical conditions qualitatively.