Effect of maltodextrin and arabic gum in water vapor sorption thermodynamic properties of vacuum dried pineapple pulp powder

Moisture equilibrium data of pineapple pulp (PP) powders with and without additives - 18% maltodextrin (MD) or 18% gum Arabic (GA) - were determined at 20, 30, 40 and 50 degrees C by using the static gravimetric method in a water activity range of 0.06-0.90. The obtained isotherms were sigmoid, typical type 111, and the Guggenhein-Anderson-de Boer (GAB) model was fitted to the experimental data of equilibrium moisture content versus water activity. Addition of additives was shown to affect the isotherms in such a way that, at the same water activity, samples PP + GA and PP + MD presented lower equilibrium moisture content and were not so affected by varying temperature. The net isosteric heats of sorption of pulp powders with additives were higher (less negative) than those of pineapple pulp powders, suggesting that there are more active polar sites in the product without addition of GA or MD. An empirical exponential relationship could describe the heat of sorption dependence on the material moisture content. (C) 2007 Elsevier Ltd. All rights reserved.

Antitumor effect of Bothrops jararaca venom

MANY experimental studies have been carried out using snake venoms for the treatment of animal tumors, with controversial results. While some authors have reported an antitumor effect of treatment with specific snake venom fractions, others have reported no effects after this treatment. The aim of this study was to evaluate the effect of Bothrops jararaca venom (BjV) on Ehrlich ascites tumor (EAT) cells in vivo and in vitro. In the in vivo study, Swiss mice were inoculated with EAT cells by the intraperitoneal (i.p.) route and treated with BjV venom (0.4 mg/kg, i.p.), on the 1st, 4th, 7th, 10th, and 13th days. Mice were evaluated for total and differential cells number on the 2nd, 5th, 8th, 11th and 14th days. The survival time was also evaluated after 60 days of tumor growth. In the in vitro study, EAT and normal peritoneal cells were cultivated in the presence of different BjV concentrations (2.5, 5.0, 10.0, 20.0, 40.0, and 80 mug) and viability was verified after 3, 6, 12 and 24 h of cultivation. Results were analyzed statistically by the Kruskal-Wallis and Tukey tests at the 5% level of significance. It was observed that in vivo treatment with BjV induced tumor growth inhibition, increased animal survival time, decreased mortality, increased the influx of polymorphonuclear leukocytes on the early stages of tumor growth, and did not affect the mononuclear cells number. In vitro treatment with BjV produced a dose-dependent toxic effect on EAT and peritoneal cells, with higher effects against peritoneal cells. Taken together, our results demonstrate that BjV has an important antitumor effect. This is the first report showing this in vivo effect for this venom.

Temperature and wavelength dependence of the thermo-optical properties of tellurite and chalcogenide glasses

The refractive index and the temperature coefficient of the optical path length change of tellurite (80TeO(2):20Li(2)O) and chalcogenide glasses (72.5Ga(2)S(3):27.5La(2)O(3)) were determined as a function of temperature (up to 150 degrees C) and wavelength (in the range between 454 and 632.8 nm). The tellurite glass exhibits the usual refractive index dispersion in the wavelength range analyzed, while anomalous refractive index dispersion was observed for the chalcogenide glass between 454 and 530 nm. The dispersion parameters were determined by means of the single-effective oscillator model. In addition, a strong dependence of the temperature coefficient of the optical path length on the photon energy and temperature was found for the chalcogenide glass. The latter was correlated to the shift of the optical band gap (or electronic edge) with temperature, which was interpreted by the electron-phonon interaction model. (C) 2007 American Institute of Physics.

Effect of microwave sterilization and water storage on the Vickers hardness of acrylic resin denture teeth

Statement of problem. Acrylic resin denture teeth soften upon immersion in water, and the heating generated during microwave sterilization may enhance this process.Purpose. Six brands of acrylic resin denture teeth were investigated with respect to the effect of microwave sterilization and water immersion on Vickers hardness (VHN).Material and Methods. The acrylic resin denture teeth (Dentron [D], Vipi Dent Plus [V], Postaris [P], Biolux [B], Trilux [T], and Artiplus [A]) were embedded in heat-polymerized acrylic resin within polyvinylchloride tubes. For each brand, the occlusal surfaces of 32 identical acrylic resin denture posterior teeth were ground flat with 1500-grit silicon carbide paper and polished on a wet polishing wheel with a slurry of tin oxide. Hardness tests were performed after polishing (control group, C) after polishing followed by 2 cycles of microwave sterilization at 650 W for 6 minutes (MwS group), after polishing followed by 90-day immersion in water (90-day Wim group), and after polishing followed by 90-day storage in water and 2 cycles of microwave sterilization (90-day Wim + MwS group). For each specimen, 8 hardness measurements were made and the mean was calculated. Data were analyzed with a 2-way analysis of variance followed by the Bonferroni procedure to determine any significance between pairs of mean values (alpha=.01).Results: Mircrowave sterilization of specimens significantly decreased (P <.001) the hardness of the acrylic resin denture tooth specimens P (17.8 to 16.6 VHN, V (18.3 to 15.8 VHN), T (17.4 to 15.3 VHN), B (16.8 to 15.7 VHN), and A (17.3 to 15.7 VHN). For all acrylic resin denture teeth, no significant differences in hardness were found between the groups Mws, 90-day Wim, and 90-day Wim + MwS, with the exception of the 90-day Wim + MwS tooth A specimens (14.4 VHN), which demonstrated significant lower mean values (P <.001) than the 90-day Wim (15.8 VHN) and MwS (15.7 VHN) specimens.Conclusions. For specimens immersed in water for 90 days, 2 cycles of microwave sterilization had no effect on the hardness of most of the acrylic resin denture teeth.

Effect of potassium fertilization in 'Rica' guava (Psidium guajava) cultivation

A field experiment was conducted from 1989-90 to 1991-92 to study the effect of potassium fertilization on guava (Psidium guajava L.). using 1-year-old plants of 'Rica', grown in a Kanhapludalf soil in the Jaboticabal region in Brazil. During the first year the K doses used were: 0, 24.9, 49.8, 99.6, 149.4 and 199.2 g K/plant, which were doubled during the second year and tripled during the third. In the third year the increase in g level showed positive response in yield. About 90% of the maximum yield observed was associated with 527 g K/plant and with a leaf content of 18.9 g K/kg.

Thermo-optical characterization of tellurite glasses by thermal lens, thermal relaxation calorimetry and interferometric methods

In this work the thermal lens, thermal relaxation calorimetry and interferometric methods are applied to investigate the thermo-optical properties of tellurite glasses (in mol%: 80TeO(2)-20 Li2O(TeLi), 80TeO(2)-15Li(2)O-5TiO(2) (TeLiTi-5) and 80TeO(2)-10Li(2)O-10TiO(2) (TeLiTi-10)). Thermal diffusivity, thermal conductivity, specific heat and the temperature coefficients of refractive index, optical path length, thermal expansion and electronic polarizability were determined. The use of three independent methods was useful for a complete characterization of the studied tellurite glasses. In addition, our results showed that the thermal expansion coefficient and the temperature coefficient of the optical path length (dS/dT) were significantly modified with the introduction of titanium, which may be relevant for the application of these glasses in the photonic area. (c) 2006 Elsevier B.V. All rights reserved.