976 resultados para Linear range
Resumo:
A ligação dissimilar de ligas de alumínio a ligas de titânio tem elevado potencial para aplicações nas indústrias aeroespacial, automóvel e naval, devido à sua baixa razão peso/resistência mecânica. Contudo, soldar ligas de alumínio a ligas de titânio apresenta-se como um grande desafio, principalmente devido à formação de fases intermetálicas frágeis que têm um efeito negativo nas propriedades mecânicas da junta. Neste estudo, foram realizadas ligações dissimilares das ligas AA6082-T6 a Ti6Al4V, por Fricção Linear assistida por Corrente Eléctrica. Para a utilização de corrente eléctrica na Soldadura por Fricção Linear foram desenvolvidas, produzidas e testadas duas novas ferramentas. A estrutura da ligação foi analisada, por microscopia óptica e electrónica de varrimento. Controlando os parâmetros de soldadura foi possível obter soldaduras topo a topo e sobrepostas com um bom aspecto superficial e com continuidade metálica na interface. Nas ligações topo-a-topo observaram-se defeitos na raiz do cordão. As estruturas na zona soldada dependem fortemente da posição do pino em relação à interface. O uso da corrente eléctrica permitiu reduzir os defeitos na raiz, como vazios e falta de ligação na mesma, sem afectar as características metalúrgicas da interface. A utilização da corrente eléctrica permite aumentar a viscoplasticidade do material e facilitar a deformação plástica à volta do pino.
Resumo:
Mannans (linear mannan, glucomannan, galactomannan and galactoglucomannan) are the major constituents of the hemicellulose fraction in softwoods and show great importance as a renewable resource for fuel or feedstock applications. As complex polysaccharides, mannans can only be degraded through a synergistic action of different mannan-degrading enzymes, mannanases. Microbial mannanases are mainly extracellular enzymes that can act in wide range of pH and temperature, contributing to pulp and paper, pharmaceutical, food and feed, oil and textile successful industrial applications. Knowing and controlling these microbial mannan-degrading enzymes are essential to take advantage of their great biotechnological potential. The genome of the laboratory 168 strain of Bacillus subtilis carries genes gmuA-G dedicated to the degradation and utilization of glucomannan, including an extracellular -mannanase. Recently, the genome sequence of an undomesticated strain of B. subtilis, BSP1, was determined. In BSP1, the gmuA-G operon is maintained, interestingly, however, a second cluster of genes was found (gam cluster), which comprise a second putative extracellular β-mannanase, and most likely specify a system for the degradation and utilization of a different mannan polymer, galactoglucomannan. The genetic organization and function of the gam cluster, and whether its presence in BSP1 strain results in new hemicellulolytic capabilities, compared to those of the laboratory strain, was address in this work. In silico and in vivo mRNA analyses performed in this study revealed that the gam cluster, comprising nine genes, is organized and expressed in at least six different transcriptional units. Furthermore, cloning, expression, and production of Bbsp2923 in Escherichia coli was achieved and preliminary characterization shows that the enzyme is indeed a β-mannanase. Finally, the high hemicellulolytic capacity of the undomesticated B. subtilis BSP1, demonstrated in this work by qualitative analyses, suggests potential to be used in the food and feed industries.
Resumo:
Os incêndios em edifícios representam um fenómeno que pode ter consequências devastadoras quando não controlado, não só em termos de perdas de vidas humanas, como em termos económicos. No passado, a ocorrência de incêndios de grandes dimensões mostrou os efeitos do fogo descontrolado nos edifícios, assim como a ineficiência dos meios de segurança ativa ao fogo. Nas últimas duas décadas, estas questões motivaram o estudo e compreensão da ação dos incêndios nas estruturas dos edifícios. Neste trabalho estuda-se a modelação da ação do fogo em estruturas metálicas e mistas, com o objetivo de contribuir para a sua melhor caracterização. A presente tese foca-se na validação e compreensão da implementação de análises termo-mecânicas a estruturas mistas no software de elementos finitos OpenSees (Open System for Earthquake Engineering Simulation), contribuindo assim para futuros estudos, não só de análises de estruturas mistas sujeitas a incêndio, mas também de análises de estruturas mistas sujeitas a eventos consecutivos, como sismo seguido de incêndio. Neste trabalho é feita uma breve descrição do fenómeno fogo, assim como dos processos inerentes à dinâmica de um incêndio que constituem uma fonte de incerteza para a modelação de cenários de incêndio num edifício. Posto isto, são abordados alguns modelos de incêndios presentes nos Eurocódigos, assim como o recente modelo de fogos móveis(“Travelling fires”). São realizados exemplos de aplicação no software e dois casos de estudo. O primeiro consiste na modelação de dois ensaios ao fogo realizados na Alemanha em 1986 em estruturas metálicas à escala 1/4. O segundo consiste na modelação de um ensaio ao fogo a uma viga de betão armado simplesmente apoiada, realizado no Instituto Superior Técnico em 2010. Os modelos numéricos desenvolvidos no OpenSees contabilizam as não linearidades físicas e geométricas, com elementos finitos de plasticidade distribuída e com uma formulação baseada em deslocamentos. Os resultados numéricos são então comparados com os experimentais, de modo a validar as análises termo-mecânicas no OpenSees.
Resumo:
A soldadura por fricção linear (SFL) é um processo de ligação no estado sólido com capacidade para soldar materiais dissimilares e ligas metálicas de baixa soldabilidade. Contudo, nas juntas soldadas com uma configuração topo-a-topo é possível o aparecimento de defeitos na raiz do cordão, nomeadamente, de falta de penetração e de alinhamentos de óxidos. Estes defeitos são responsáveis pela diminuição da resistência mecânica das juntas, sobretudo quando sujeitas a esforços de fadiga. Existem variantes do processo para eliminar este tipo de defeitos, no entanto, verificam-se algumas dificuldades tecnológicas e a competitividade do processo é afetada. No âmbito deste trabalho desenvolveu-se uma variante do processo designado soldadura por fricção linear assistida por corrente elétrica (SFLAE). Esta variante consiste em introduzir uma corrente elétrica de elevada intensidade na zona da raiz do cordão, por forma a que o calor gerado por efeito de Joule aqueça o material e aumente o fluxo visco-plástico nessa zona, tendo em vista atenuar ou eliminar os defeitos na raiz. Foram concebidas e produzidas ferramentas de SFL dedicadas, melhorado um modelo analítico do processo, realizadas simulações numéricas para permitir compreender alguns fenómenos físicos envolvidos no processo, e realizados ensaios experimentais de validação. A análise aos cordões permitiu observar uma diminuição da espessura dos defeitos na raiz em três ensaios realizados na liga AA1100 e AA6084-T6 usando intensidades de corrente de 300 A. Dos resultados de microdureza e de medição de condutividade elétrica é possível concluir que a microestrutura do material não é significativamente alterada pela passagem de corrente elétrica.
Resumo:
Diffusion Kurtosis Imaging (DKI) is a fairly new magnetic resonance imag-ing (MRI) technique that tackles the non-gaussian motion of water in biological tissues by taking into account the restrictions imposed by tissue microstructure, which are not considered in Diffusion Tensor Imaging (DTI), where the water diffusion is considered purely gaussian. As a result DKI provides more accurate information on biological structures and is able to detect important abnormalities which are not visible in standard DTI analysis. This work regards the development of a tool for DKI computation to be implemented as an OsiriX plugin. Thus, as OsiriX runs under Mac OS X, the pro-gram is written in Objective-C and also makes use of Apple’s Cocoa framework. The whole program is developed in the Xcode integrated development environ-ment (IDE). The plugin implements a fast heuristic constrained linear least squares al-gorithm (CLLS-H) for estimating the diffusion and kurtosis tensors, and offers the user the possibility to choose which maps are to be generated for not only standard DTI quantities such as Mean Diffusion (MD), Radial Diffusion (RD), Axial Diffusion (AD) and Fractional Anisotropy (FA), but also DKI metrics, Mean Kurtosis (MK), Radial Kurtosis (RK) and Axial Kurtosis (AK).The plugin was subjected to both a qualitative and a semi-quantitative analysis which yielded convincing results. A more accurate validation pro-cess is still being developed, after which, and with some few minor adjust-ments the plugin shall become a valid option for DKI computation
Resumo:
ABSTRACT Background Mental health promotion is supported by a strong body of knowledge and is a matter of public health with the potential of a large impact on society. Mental health promotion programs should be implemented as soon as possible in life, preferably starting during pregnancy. Programs should focus on malleable determinants, introducing strategies to reduce risk factors or their impact on mother and child, and also on strengthening protective factors to increase resilience. The ambition of early detecting risk situations requires the development and use of tools to assess risk, and the creation of a responsive network of services based in primary health care, especially maternal consultation during pregnancy and the first months of the born child. The number of risk factors and the way they interact and are buffered by protective factors are relevant for the final impact. Maternal-fetal attachment (MFA) is not yet a totally understood and well operationalized concept. Methodological problems limit the comparison of data as many studies used small size samples, had an exploratory character or used different selection criteria and different measures. There is still a lack of studies in high risk populations evaluating the consequences of a weak MFA. Instead, the available studies are not very conclusive, but suggest that social support, anxiety and depression, self-esteem and self-control and sense of coherence are correlated with MFA. MFA is also correlated with health practices during pregnancy, that influence pregnancy and baby outcomes. MFA seems a relevant concept for the future mother baby interaction, but more studies are needed to clarify the concept and its operationalization. Attachment is a strong scientific concept with multiple implications for future child development, personality and relationship with others. Secure attachment is considered an essential basis of good mental health, and promoting mother-baby interaction offers an excellent opportunity to intervention programmes targeted at enhancing mental health and well-being. Understanding the process of attachment and intervening to improve attachment requires a comprehension of more proximal factors, but also a broader approach that assesses the impact of more distal social conditions on attachment and how this social impact is mediated by family functioning and mother-baby interaction. Finally, it is essential to understand how this knowledge could be translated in effective mental health promoting interventions and measures that could reach large populations of pregnant mothers and families. Strengthening emotional availability (EA) seems to be a relevant approach to improve the mother-baby relationship. In this review we have offered evidence suggesting a range of determinants of mother-infant relationship, including age, marital relationship, social disadvantages, migration, parental psychiatric disorders and the situations of abuse or neglect. Based on this theoretical background we constructed a theoretical model that included proximal and distal factors, risk and protective factors, including variables related to the mother, the father, their social support and mother baby interaction from early pregnancy until six months after birth. We selected the Antenatal Psychosocial Health Assessment (ALPHA) for use as an instrument to detect psychosocial risk during pregnancy. Method Ninety two pregnant women were recruited from the Maternal Health Consultation in Primary Health Care (PHC) at Amadora. They had three moments of assessment: at T1 (until 12 weeks of pregnancy) they filed out a questionnaire that included socio-demographic data, ALPHA, Edinburgh post-natal Depression Scale (EDPS), General Health Questionnaire (GHQ) and Sense of Coherence (SOC); at T2 (after the 20th weeks of pregnancy) they answered EDPS, SOC and MFA Scale (MFAS), and finally at T3 (6 months after birth), they repeated EDPS and SOC, and their interaction with their babies was videotaped and later evaluated using EA Scales. A statistical analysis has been done using descriptive statistics, correlation analysis, univariate logistic regression and multiple linear regression. Results The study has increased our knowledge on this particular population living in a multicultural, suburb community. It allow us to identify specific groups with a higher level of psychosocial risk, such as single or divorced women, young couples, mothers with a low level of education and those who are depressed or have a low SOC. The hypothesis that psychosocial risk is directly correlated with MFAS and that MFA is directly correlated with EA was not confirmed, neither the correlation between prenatal psychosocial risk and mother-baby EA. The study identified depression as a relevant risk factor in pregnancy and its higher prevalence in single or divorced women, immigrants and in those who have a higher global psychosocial risk. Depressed women have a poor MFA, and a lower structuring capacity and a higher hostility to their babies. In average, depression seems to reduce among pregnant women in the second part of their pregnancy. The children of immigrant mothers show a lower level of responsiveness to their mothers what could be transmitted through depression, as immigrant mothers have a higher risk of depression in the beginning of pregnancy and six months after birth. Young mothers have a low MFA and are more intrusive. Women who have a higher level of education are more sensitive and their babies showed to be more responsive. Women who are or have been submitted to abuse were found to have a higher level of MFA but their babies are less responsive to them. The study highlights the relevance of SOC as a potential protective factor while it is strongly and negatively related with a wide range of risk factors and mental health outcomes especially depression before, during and after pregnancy. Conclusions ALPHA proved to be a valid, feasible and reliable instrument to Primary Health Care (PHC) that can be used as a total sum score. We could not prove the association between psychosocial risk factors and MFA, neither between MFA and EA, or between psychosocial risk and EA. Depression and SOC seems to have a clear and opposite relevance on this process. Pregnancy can be considered as a maturational process and an opportunity to change, where adaptation processes occur, buffering risk, decreasing depression and increasing SOC. Further research is necessary to better understand interactions between variables and also to clarify a better operationalization of MFA. We recommend the use of ALPHA, SOC and EDPS in early pregnancy as a way of identifying more vulnerable women that will require additional interventions and support in order to decrease risk. At political level we recommend the reinforcement of Immigrant integration and the increment of education in women. We recommend more focus in health care and public health in mental health condition and psychosocial risk of specific groups at high risk. In PHC special attention should be paid to pregnant women who are single or divorced, very young, low educated and to immigrant mothers. This study provides the basis for an intervention programme for this population, that aims to reduce broad spectrum risk factors and to promote Mental Health in women who become pregnant. Health and mental health policies should facilitate the implementation of the suggested measures.
Resumo:
Rupture of aortic aneurysms (AA) is a major cause of death in the Western world. Currently, clinical decision upon surgical intervention is based on the diameter of the aneurysm. However, this method is not fully adequate. Noninvasive assessment of the elastic properties of the arterial wall can be a better predictor for AA growth and rupture risk. The purpose of this study is to estimate mechanical properties of the aortic wall using in vitro inflation testing and 2D ultrasound (US) elastography, and investigate the performance of the proposed methodology for physiological conditions. Two different inflation experiments were performed on twelve porcine aortas: 1) a static experiment for a large pressure range (0 – 140 mmHg); 2) a dynamic experiment closely mimicking the in vivo hemodynamics at physiological pressures (70 – 130 mmHg). 2D raw radiofrequency (RF) US datasets were acquired for one longitudinal and two cross-sectional imaging planes, for both experiments. The RF-data were manually segmented and a 2D vessel wall displacement tracking algorithm was applied to obtain the aortic diameter–time behavior. The shear modulus G was estimated assuming a Neo-Hookean material model. In addition, an incremental study based on the static data was performed to: 1) investigate the changes in G for increasing mean arterial pressure (MAP), for a certain pressure difference (30, 40, 50 and 60 mmHg); 2) compare the results with those from the dynamic experiment, for the same pressure range. The resulting shear modulus G was 94 ± 16 kPa for the static experiment, which is in agreement with literature. A linear dependency on MAP was found for G, yet the effect of the pressure difference was negligible. The dynamic data revealed a G of 250 ± 20 kPa. For the same pressure range, the incremental shear modulus (Ginc) was 240 ± 39 kPa, which is in agreement with the former. In general, for all experiments, no significant differences in the values of G were found between different image planes. This study shows that 2D US elastography of aortas during inflation testing is feasible under controlled and physiological circumstances. In future studies, the in vivo, dynamic experiment should be repeated for a range of MAPs and pathological vessels should be examined. Furthermore, the use of more complex material models needs to be considered to describe the non-linear behavior of the vascular tissue.
Resumo:
RESUMO: Tivemos como objectivo do presente trabalho avaliar a capacidade funcional, e factores eventualmente a ela associados, numa amostra de 152 idosos ambulatórios, sem doenças agudas ou graves, utentes de um centro de saúde urbano. Cada avaliação consistiu numa entrevista, mediante um inquérito sobre capacidade funcional, morbilidade, estado mental e aspectos sociais, e no estudo da composição corporal. As perguntas referentes às variáveis estudadas foram por nós desenvolvidas e estruturadas com base em escalas internacionais validadas e de utilização comum na avaliação de idosos, excepto para as variáveis em que não encontrámos escalas com essas características. Os seus quesitos foram incluídos como perguntas e respostas estruturadas e pré-codificadas, permitindo a atribuição de uma pontuação a cada variável e a sua posterior divisão dicotómica. Aplicámos as escalas de Katz e de Lawton para a avaliação das actividades de autonomia física e instrumental da vida diária, a escala de Grimby para a avaliação da actividade física, a escala de Hamilton e o teste de Folstein para a avaliação do estado mental nas vertentes afectiva e cognitiva e a escala de Graffar para caracterizar a classe social, e perguntas sobre locomoção, autoavaliação da saúde, queixas de saúde presentes e rede social. Fizemos o registo da morbilidade segundo a International Classification of Primary Care - ICPC. A avaliação antropométrica constou da medição do peso, da altura, dos perímetros do braço, da cintura, da anca e proximal da coxa, e das pregas bicipital, tricipital, sub-escapular e supra-ilíaca. Foi também feita a estimativa da composição corporal por cálculos derivados de índices antropométricos e de bioimpedância eléctrica corporal total, o doseamento de algumas proteínas plasmáticas e a quantificação da força de preensão. Analisámos os resultados obtidos por grupos quanto ao sexo e à idade, dividida nos escalões etários 65 a 74 anos e mais do que 74 anos. Por regressão linear múltipla, foi testado o efeito do sexo e da idade sobre os valores medidos, para cada uma das variáveis e cada uma das suas pontuações parciais, sendo considerado como evidência de um efeito estaticamente significativo um valor “p” inferior a 0,05.Resumimos do seguinte modo os dados obtidos e a sua comparação com os dos estudos que seleccionámos como referência: A média de idades da amostra foi de 74 anos, sendo um terço destes do sexo masculino. Na sua maioria eram independentes em locomoção e funcionalidade, praticavam alguma actividade física, classificavam a sua saúde como razoável ou boa, apresentavam sintomatologia activa, não tinham depressão ou demência, tinham quem os acompanhasse embora cerca de metade apresentasse algum grau de isolamento, eram de baixa classe social, tinham excesso de peso, valores elevados de massa gorda, parâmetros plasmáticos proteicos compatíveis com ausência de doenças agudas ou graves e considerável força muscular de preensão. Na análise descritiva por grupos quanto ao sexo e/ou à idade, verificou-se que as mulheres e os mais idosos apresentavam maior isolamento social e os valores mais baixos de massa magra, hemoglobina e força de preensão. As mulheres tinham maior prevalência de dependência em autonomia física, depressão e valores mais baixos de transferrina. Os mais idosos apresentavam maior dependência em funcionalidade, menor actividade física, maior prevalência de demência, índice de massa corporal menos elevado, e valores mais baixos de albumina. Não se verificou prevalência de piores resultados dicotómicos nos homens nem no escalão etário menos idoso. Não teve relação com o sexo ou a idade o compromisso em autonomia instrumental, a presença de morbilidade ou a baixa classe social, assim como a não perturbação da locomoção e dos níveis de somatomedina-C. A análise comparativa com estudos multidimensionais em idosos portugueses e europeus ambulatórios revelou que a nossa amostra apresentava muitas características semelhantes às desses idosos. Assim, tinham elevada independência em locomoção, considerável independência em autonomia física e menor independência em autonomia instrumental; prática de actividade física ligeira, as mulheres dentro e os homens fora de casa; maior prevalência de morbilidade a nível dos aparelhos locomotor e cardiocirculatório, nos nossos idosos com pouca flutuação na autoavaliação de saúde; pequena prevalência de depressão e de demência; maior isolamento social nas mulheres e nas mais idosas; factores de classe social de baixo nível, diferindo apenas em relação aos idosos do norte da Europa que apresentavam elevada escolaridade e profissões mais diferenciadas; características biométricas sobreponíveis às dos idosos portugueses e às dos do sul da Europa, com tendência para o excesso de peso e proporção elevada de massa gorda; e doseamentos plasmáticos proteicos e força muscular de preensão compatíveis com ausência de doenças agudas ou crónicas graves. A comparação com os referidos estudos em relação ao risco de dependência, revelou semelhanças na associação entre dependência funcional e idade avançada, morbilidade, alteração do estado mental e isolamento social. Na amostra que estudámos não obtivemos associação entre dependência e o sexo feminino, facto que se verificou no estudo nacional de Almeida et al. e nos estudos multicêntricos europeus, ou o grau de escolaridade, como no estudo francês. Podemos concluir que, com o instrumento de avaliação que utilizámos, foi possível detectar e caracterizar perturbações numa amostra de idosos ambulatórios, a maioria funcionalmente independentes, sem alterações do estado mental, mas apresentando morbilidade activa, tendência para a obesidade, e actividade física ligeira. Nos que apresentaram alterações, estas foram mais frequentes no sexo feminino e nos indivíduos com mais de 74 anos. A escala de funcionalidade desenvolvida foi sensível aos efeitos da idade e permitiu o cálculo do risco de dependência em relação às outras variáveis estudadas, sendo mais marcante a associação com baixa actividade física, presença de queixas de saúde, demência e índice de massa corporal elevado. Consideramos que a metodologia que empregámos poderá contribuir para a avaliação de capacidades, cujo conhecimento sistemático nos idosos se impõe. ------------- ABSTRACT: The main objective of the present work was to evaluate functional capacity and related factors, in a sample of 152 ambulatory elderly, free from acute or serious disease, attending an urban health centre. Each evaluation included an interview, with a questionnaire about functional capacity, morbidity, mental health and social aspects, and the study of body composition. The questions were developed and structured in accordance with international validated scales usually applied in the evaluation of the elderly, whenever there were scales for that purpose. Their items were included as structured pre-coded questions and answers, so that each variable could have its own quotation and be dichotomised. We employed Katz and Lawton scales for basic and instrumental activities of daily living, Grimby scale for physical activity, Hamilton scale for depression, Folstein’s Mini Mental State Examination for cognitive ability and Graffar scale for social class, and questions about walking, health perception, active complaints and social network. The symptoms register was done according to the International Classification of Primary Care - ICPC. The anthropometric exam involved the determination of height and weight, arm, waist, hip and proximal thigh circumferences, and biceps, triceps, subscapular and suprailiac skinfolds. For the body composition calculation we employed equations derived from anthropometric indices, and from measurement of total body bioelectric impedance. We also measured some plasma proteins and handgrip strength. The analysis of results was done by sex and age groups, separating those with 65 to 74 years from those older than 74 years. The effects of sex and age were tested by linear multiple regression, for each variable and its components. Presented "p" values being considered statistically significative if less than 0,05. The results we obtained and their comparison with the studies we choose as reference can be summarised as follows: Mean age of the sample was 74 years and about one third were men. Most of them were independent in gait and functionality, practised some physical activity, rate their health as fair or good, had physical complaints, had not depression or dementia, had some companionship although almost half of them with stigmas of isolation, belonged to low social class, were in the range of overweight, had raised values of fat mass, plasma proteins in accordance with no acute or serious disease, and considerable handgrip strength. The analysis of groups by sex and age revealed that women and the eldest had the greater social isolation and the lowest values of free fat mass, haemoglobin and handgrip strength. Women had the higher dependence in basic activities of daily living, more depression and lower levels of transferrin. The eldest were more dependent in functionality, had greater prevalence of dementia, less physical activity, less raised body mass index and lower levels of albumin. Men alone and the age range of 65 to 74 did not show any prevalence of the worse dichotomised results. There was no relationship between sex or age and instrumental activities of daily living, morbidity or low social class, and unaffected gait or somatomedin-C levels. The comparison of results with multidimensional studies in portuguese and european ambulatory elderly showed that our sample had many similarities with theirs. They were independent in gait and activities of daily living; practiced light physical activity, women indoors and men outdoors; had greater morbidity at locomotor and cardiovascular systems, with small latitude in health evaluation; low prevalence of depression and dementia; social isolation predominantly in older women; and low social class factors, witch is only different from those of north Europe who had higher education levels and professional carriers; biometric characteristics similar to other portuguese and south Europe elders, with tendency for overweight and high proportion of fat mass; and plasma protein levels and handgrip strength in accordance with no acute or chronic serious disease. The comparison to the referred studies in relation to dependency risk, showed similarities in the association of dependency and age, morbidity,altered mental state and social isolation. We did not find association between dependency and sex, as it was found in the portuguese study of Almeida et al. and the european multicentric studies, or the education level, as in the french study. We conclude that, with the evaluation battery we employed, it was possible to detect and characterise alterations in a sample of ambulatory elderly, most of whom were functionally independent and had no alterations in mental state, but had active morbidity, tendency to obesity, and only light physical activity. Those that had some alteration, were more frequently women and the eldest. The functionality scale we developed showed to be sensitive to age effects and suitable for the calculation of risk of dependency, being more important the association with low physical activity, active complaints, dementia and high body mass index. We consider that the methodology we applied can contribute to the evaluation of capabilities that should be systematically sought for in the elderly.
Resumo:
A potentially renewable and sustainable source of energy is the chemical energy associated with solvation of salts. Mixing of two aqueous streams with different saline concentrations is spontaneous and releases energy. The global theoretically obtainable power from salinity gradient energy due to World’s rivers discharge into the oceans has been estimated to be within the range of 1.4-2.6 TW. Reverse electrodialysis (RED) is one of the emerging, membrane-based, technologies for harvesting the salinity gradient energy. A common RED stack is composed by alternately-arranged cation- and anion-exchange membranes, stacked between two electrodes. The compartments between the membranes are alternately fed with concentrated (e.g., sea water) and dilute (e.g., river water) saline solutions. Migration of the respective counter-ions through the membranes leads to ionic current between the electrodes, where an appropriate redox pair converts the chemical salinity gradient energy into electrical energy. Given the importance of the need for new sources of energy for power generation, the present study aims at better understanding and solving current challenges, associated with the RED stack design, fluid dynamics, ionic mass transfer and long-term RED stack performance with natural saline solutions as feedwaters. Chronopotentiometry was used to determinate diffusion boundary layer (DBL) thickness from diffusion relaxation data and the flow entrance effects on mass transfer were found to avail a power generation increase in RED stacks. Increasing the linear flow velocity also leads to a decrease of DBL thickness but on the cost of a higher pressure drop. Pressure drop inside RED stacks was successfully simulated by the developed mathematical model, in which contribution of several pressure drops, that until now have not been considered, was included. The effect of each pressure drop on the RED stack performance was identified and rationalized and guidelines for planning and/or optimization of RED stacks were derived. The design of new profiled membranes, with a chevron corrugation structure, was proposed using computational fluid dynamics (CFD) modeling. The performance of the suggested corrugation geometry was compared with the already existing ones, as well as with the use of conductive and non-conductive spacers. According to the estimations, use of chevron structures grants the highest net power density values, at the best compromise between the mass transfer coefficient and the pressure drop values. Finally, long-term experiments with natural waters were performed, during which fouling was experienced. For the first time, 2D fluorescence spectroscopy was used to monitor RED stack performance, with a dedicated focus on following fouling on ion-exchange membrane surfaces. To extract relevant information from fluorescence spectra, parallel factor analysis (PARAFAC) was performed. Moreover, the information obtained was then used to predict net power density, stack electric resistance and pressure drop by multivariate statistical models based on projection to latent structures (PLS) modeling. The use in such models of 2D fluorescence data, containing hidden, but extractable by PARAFAC, information about fouling on membrane surfaces, considerably improved the models fitting to the experimental data.
Resumo:
Com a evolução dos recursos computacionais e o desenvolvimento dos modelos constitutivos disponíveis na avaliação do comportamento estrutural de elementos de betão armado, é comum recorrer-se cada vez mais a modelos numéricos que consideram a não-linearidade física e geométrica. As simulações numéricas obtidas com recurso a este tipo de modelos computacionais permitem obter um historial completo do comportamento estrutural, desde o início da aplicação do carregamento, até ao colapso total da estrutura. Contudo, verifica-se que em zonas de descontinuidade geométrica em estruturas de betão armado, a evolução do padrão de fendilhação é um fenómeno relativamente complexo, cuja simulação numérica representa um desafio considerável. O objectivo deste trabalho é o de verificar a aplicabilidade do Método dos Elementos Aplicados no estudo do desenvolvimento do padrão de fendilhação em paredes de betão armado, solicitadas por um carregamento monotónico. Foi analisado um conjunto de dez paredes, todas com uma abertura que provoca uma zona de descontinuidade geométrica e, consequentemente, um padrão de fendilhação mais complexo. Cada parede tem uma pormenorização de armadura diferente, permitindo verificar a fiabilidade do modelo computacional. Os resultados numéricos foram comparados com ensaios experimentais realizados por Bounassar Filho [8], permitindo tirar conclusões sobre as vantagens e as limitações deste método, quando aplicado ao estudo de estruturas de betão armado solicitadas por cargas monotónicas.
Resumo:
A presente dissertação tem como objetivo principal a implementação de uma arquitetura baseada em algoritmos evolutivos para a sintonização dos parâmetros do controlador PID (Proporcional-Integral-Derivativo) difuso, sendo o conceito de desempenho em malha fechada explicitamente tido em conta. A sintonização dos parâmetros do controlador difuso é realizada tendo em conta um problema de otimização com restrições, em que a função de custo a ser minimizada é descrita em termos do desempenho em malha fechada, com a dinâmica do sistema a ser aproximada por um modelo não linear. Como nas metodologias de otimização existentes, a incorporação de mecanismos de adaptação referentes às funções de pertença não é comum, na presente dissertação é tido em conta, para além da usual sintonização dos fatores de escala, a sintonização dos fatores de escala e funções de pertença em simultâneo. Os resultados experimentais realizados num sistema de referência, visam demonstrar os benefícios de incorporar as funções de pertença no processo de otimização em diferido. É também utilizado um método analítico de segunda ordem como referência, por forma a comparar o desempenho de uma abordagem de otimização global contra uma de otimização local. Finalmente é implementada uma abordagem em-linha, usando o método analítico de segunda ordem, na otimização dos fatores de escala e funções de pertença.
Resumo:
Online third-party reviews have been grown over the last decade and they now play an important role as a tool for helping customers evaluate products and services that in many cases offer more than tangible features. This study intends to quantify the impact online ratings have over video game sales by conducting a linear regression analysis on 300 titles for the previous console generation (PlayStation® 3 and Xbox® 360) using a data from the video game industry to understand the existing influence on this particular market. The findings showed that these variables have a weak linear relationship thus suggesting that quality of a title explains little the commercial success of a video game and instead this should cover a wider range of factors. Afterwards, we compare results to previous ones and discuss the managerial implications for upcoming gaming generations.
Resumo:
Introduction Molecular biology procedures to detect, genotype and quantify hepatitis C virus (HCV) RNA in clinical samples have been extensively described. Routine commercial methods for each specific purpose (detection, quantification and genotyping) are also available, all of which are typically based on polymerase chain reaction (PCR) targeting the HCV 5′ untranslated region (5′UTR). This study was performed to develop and validate a complete serial laboratory assay that combines real-time nested reverse transcription-polymerase chain reaction (RT-PCR) and restriction fragment length polymorphism (RFLP) techniques for the complete molecular analysis of HCV (detection, genotyping and viral load) in clinical samples. Methods Published HCV sequences were compared to select specific primers, probe and restriction enzyme sites. An original real-time nested RT-PCR-RFLP assay was then developed and validated to detect, genotype and quantify HCV in plasma samples. Results The real-time nested RT-PCR data were linear and reproducible for HCV analysis in clinical samples. High correlations (> 0.97) were observed between samples with different viral loads and the corresponding read cycle (Ct - Cycle threshold), and this part of the assay had a wide dynamic range of analysis. Additionally, HCV genotypes 1, 2 and 3 were successfully distinguished using the RFLP method. Conclusions A complete serial molecular assay was developed and validated for HCV detection, quantification and genotyping.
Resumo:
INTRODUCTION: Leptospirosis is a re-emerging zoonotic disease of humans and animals worldwide. The disease is caused by pathogenic species of the genus Leptospira. These organisms are maintained in nature via chronic renal infection of carrier animals, which excrete the organisms in their urine. Humans become infected through direct or indirect exposure to infected animals and their urine or through contact with contaminated water and soil. This study was conducted to investigate Leptospira infections as a re-emerging zoonosis that has been neglected in Egypt. METHODS: Samples from 1,250 animals (270 rats, 168 dogs, 625 cows, 26 buffaloes, 99 sheep, 14 horses, 26 donkeys and 22 camels), 175 human contacts and 45 water sources were collected from different governorates in Egypt. The samples were collected from different body sites and prepared for culture, PCR and the microscopic agglutination test (MAT). RESULTS: The isolation rates of Leptospira serovars were 6.9%, 11.3% and 1.1% for rats, dogs and cows, respectively, whereas the PCR results revealed respective detection rates of 24%, 11.3% and 1.1% for rats, dogs and cows. Neither the other examined animal species nor humans yielded positive results via these two techniques. Only six Leptospira serovars (Icterohaemorrhagiae, Pomona, Canicola, Grippotyphosa, Celledoni and Pyrogenes) could be isolated from rats, dogs and cows. Moreover, the seroprevalence of leptospiral antibodies among the examined humans determined using MAT was 49.7%. CONCLUSIONS: The obtained results revealed that rats, dogs and cows were the most important animal reservoirs for leptospirosis in Egypt, and the high seroprevalence among human contacts highlights the public health implications of this neglected zoonosis.