987 resultados para Leiden
Resumo:
We describe a previously unreported behavior for water collection in juveniles of a neotropical viperid snake. Bothrops moojeni. When sprayed over, this snake displays a stereotyped coiling, bringing its body loops in close contact with each other, so that water is retained between the loops and over the body surface. This water is continuously ingested during and after its collection. The functional significance of the water collecting behavior is suggested to be related with the acquisition of water from short rainfalls, and with the special climatic and geologic conditions of B. moojeni habitat. Rates of evaporative water loss did not differ between juvenile and adult snakes, but since juveniles have a greater surface-to-volume ratio, they were significantly more sensitive to desiccation than the adults.
Resumo:
In Brazil there was little research related to Shiitake axenic culture. The aim of this research was to understand the substratum effects in the kinetics of the Shiitake mycelium growth. It was used two Shiitake strains and two different base substrate (eucalyptus sawdust and sugar cane bagasse) varying in three proportions of the supplements. The supplements, a blend of rice and wheat brans, were added in the proportion of 0, 10 and 20% of the base substrate. The experiment was composed of six treatments. The mycelium growth kinetics in volume had no effect relation to the strains and substrate and it followed a mathematical model represented by logarithmic equation. Beta, gamma and delta parameters didn't show any correlation with the growth velocity in volume. The strain L55 was better adapted than L17.
Resumo:
This work presents a methodology for elastic-plastic fracture reliability analysis of plane and axisymmetric structures. The structural reliability analysis is accomplished by means of the FORM analytical method. The virtual crack extension technique based on a direct minimization of potencial energy is utililized for the calculation of the energy release rate. Results are presented to illustrate the performance of the adopted methodology.
Resumo:
We present a description of the external morphology and internal oral features of the tadpole of Scinax catharinae and comparisons with the known tadpoles of the S. catharinae group. Two characters of the external morphology present some intraspecific variation: the row of submarginal papillae, which can be uniseriate or absent, and the tail tip, which can be large or small, truncated or not. That said, the tadpole of S. catharinae presents some distinguishing features that differentiate it from other tadpoles in the S. catharinae group: i) the marginal row of papillae with alternate disposition, ii) the spiracle opening on the midline of the body, iii) longest snout length, and iv) largest interorbital distance. The studied species were segregated into five ecomorphological guilds, characterized by external morphological features, tadpole habitat use and vegetation formation of species range. The taxonomy of the S. catharinae group is complex, due to the morphological similarities among the adults. Larval characters could help in the resolution of the taxonomic and phylogenetic complexities, since the morphological differences among the tadpoles in this group seem more conspicuous than those found among the adults.
Resumo:
The larval development of Acanthonyx petiverii H. M. Edwards, 1834, was studied in the laboratory through eggs hatched from ovigerous females collected in Ubatuba, state of São Paulo, Brazil. The rearings were carried out in a climatic room with constant temperature (25 degrees +/- 1 degrees C) and salinity (34,5 parts per thousand). The larvae were maintained individually and the food consisted of Artemia nauplii. The larval development of A. petiverii consists of two zoeal stages and a megalopa. All the larval stages were drawn and described in detail. Tables include those presenting morphological characters that allow the identification of zoeae and megalopa of A. petiverii. A comparative study was realized with previously studied majid species that occur in southern and southeastern Brazil.
Resumo:
The modified Cam - Clay model was used to model experimental results of a saturated residual sandy soil from Sao Carlos - SP. Triaxial compression tests were performed using Bishop - Wesley cell with internal transducers to measure axial and radial strains. It was observed that the model fairly fitted experimental results, specially the principal stress difference at critical state. In general it was observed a good qualitative agreement between experimental and predicted strain values, considering compression or expansion of the samples. However, in all the stress path used, but 100 degrees and 140 degrees, the model yielded strains larger than that measured in the tests.
Resumo:
The dilatometer test results have been lately applied in foundation design for prediction of settlement and bearing capacity problems. The equipment, its calibration, test procedures and test data interpretation are simple. These advantages seem to explain the increasing use of the dilatometer (DMT) test as a routine technique for subsoil investigation. The DMT test boreholes were carried out on the grounds of the National Research Council (NRC) in Ottawa. Several test results based on laboratory, and other in situ tests available in the literature for the Leda clay deposit in Ottawa area were used to provide correlations between geotechnical properties and soil index parameters as proposed by Marchetti (1980). More appropriated relationships, even though preliminaries, are presented for the crust layer.
Resumo:
The larval development of Pyromaia tuberculata (Lockington, 1877) is described from specimens reared in the laboratory. Larvae were obtained from ovigerous females collected by trawl in Ubatuba, São Paulo state, Brazil. Rearing was carried out at 24 +/- 1 degrees C in 35 parts per thousand S. The larvae pass through two zoeal stages before moulting to the megalopa. A comparison is made with previously studied majid species occurring in the southern and southeastern regions of Brazil.
Resumo:
A lesion nematode population infecting citrus in the state of São Paulo, Brazil is described and named Pratylenchus jaehni sp. n. Biological, molecular and morphological characteristics of this new species are compared with those of the morphologically similar P. coffeae and P. loosi. Results of mating experiments showed that R jaehni is reproductively isolated from P coffeae. Molecular (D2/D3 DNA sequences) dissimilarities among P. jaehni sp, n., P. coffeae and P. loosi were documented in a previous study. The morphology of seven R coffeae populations from tropical America and eastern Java and a P loosi population from Sri Lanka is used for comparison with the morphology of P. jaehni sp. n. Pratylenchus jaehni differs from R coffeae and P. loosi by only a few morphological ;characters of the females. The mean values of stylet length, stylet knob height, and vulva position are smaller (less than or equal to15 vs greater than or equal to15 mum, less than or equal to2.7 vs greater than or equal to2.7 mum, less than or equal to79 vs greater than or equal to79%) than those in P coffeae and P loosi. The tail terminus is usually subhemispherical and smooth in P jaehni sp. n.. whereas it is commonly truncate and indented in most P. coffeae populations and bluntly or finely pointed in P. loosi. Because of the morphological similarities among P. jaehni sp. n., P. coffeae and P. loosi, examination of at least ten specimens is required to obtain a reliable diagnosis based on morphology. Nineteen morphometric parameters for P. jaehni sp. n. and P. coffeae ranged from 0-13% smaller in fixed than in live specimens.
Resumo:
This paper describes the results of a study on groundwaters from Tubarao Group at the Parana sedimentary basin, São Paulo State, Brazil. The purpose of this study was to integrate chemical and U-isotopes data in order to evaluate the models for quantifying different relative volumes of mixing waters in a resultant water. Despite it was possible to generate a typical triangle involving U-238 and its daughter U-234, the U-isotopes model failed to interpret the major hydrochemical facies observed in the studied localities.
Resumo:
Detailed characterizations of the karyotypes of the Brazilian leptodactylid frogs Pleurodema diplolistris, the only species of Pleurodema not studied cytogenetically so far, and Physalaemus nattereri, a species in the Ph. biligonigerus group, are presented. Both karyotypes had 2n = 22 and their chromosomes had a very similar morphology, except for pair 11, which was metacentric in Pl. diplolistris and telocentric in Ph. nattereri. The localization of nucleolar organizer regions (NORs) and heterochromatic bands allowed the differentiation of chromosomes that were morphologically indistinguishable between these species, such as pairs 1, 3 and 10, which showed interstitial C-bands in Ph. nattereri, and pair 8, that had an NOR and an adjacent C-band in Pl. diplolistris. Pair 8 also has NOR-bearing chromosomes in many other Pleurodema species. However, in these species, the NOR is located proximal to the centromere on the short arm, while in Pl. diplolistris it occurred distally on the long arm, a condition that may be considered a derived state. In Ph. nattereri, the NOR occurred on chromosome I 1 and differed from the other species of the Ph. biligonigerus group. In contrast, C-banding revealed a heterochromatic block near the centromere on the short arm of pair 3, a characteristic common to all members of this group of Physalaemus.
Resumo:
The objective of the present study was to characterize the fecundity of Callinectes ornatus from the northern coast of São Paulo, Brazil. To study the fecundity and its relationships to size, brood weight, and egg size, the ovigerous females were collected at 2-month intervals for two consecutive years (January, 1991 to November, 1992) in the Ubatuba region using a fishing boat equipped with an otter-trawl type of net. After collecting, the animals were screened, bagged, labeled, and stored frozen. Only data from 38 females carrying early stage eggs were considered. In the laboratory, the specimens were thawed at room temperature, the pleopod structure with the egg mass was removed and the eggs were carefully removed from the pleopods. The samples were then fixed in 10% formalin and stored in 70% ethanol, until the time for processing. Processing followed the method of Hines (1982, 1988). Following the frequency determination of carapace width and fecundity, mean egg number, mean volume and mean dry weight of brooded egg mass were determined for each class obtained. Data were analyzed by regressions of log-log transformations for allometric plots (Y = aX(b)) of reproductive variables versus carapace width. Carapace width was one of the main factors for the determination of fecundity, which ranged 171 570 +/- 94 634 eggs, with females of the same size class presenting a wide amplitude of variation. This supports the hypothesis that portunid females present staggered spawning, possibly presenting more than one period of reproduction within one year. The present species showed lower fecundity than the remaining portunids studied, but they did show a rapid and efficient embryonic development, presumably capable of assuring reproductive success.
Resumo:
Arenaeus cribrarius is a mainly tropical crab that occurs in the Western Atlantic Ocean, Brazil being its type-locality. The species ranges from Vinevard Sound, Massachusetts, USA to La Paloma, Uruguay. Information about this species is scarce. The relative growth of A. cribrarius was analyzed, based on some morphometric relations, where the carapace width, excluding lateral spines (CW), was used as an independent variable. A total of 403 specimens (189 males and 214 females), was collected in Ubatuba, State of São Paulo, Brazil, with otter-trawls. The animals were sexed and sorted to maturation phase (juvenile or adult). Some measurements were made: carapace (length and width excluding lateral spines), abdomen (greatest width of the fifth somite in females and the sixth in males) and major chela (greatest length, width and height, dactylus length). This study was made by the application of the power function (y=a.x(b)) which was fitted to the data and the pattern of growth established for each parameter by the ''b''-value (constant of allometry), as positive allometry (b>1), negative allometry (b<1) or isometry (b=1). The morphometric relations of the carapace showed a tendency to isometry. In females, the abdominal width grew in positive allometry, higher in juveniles (b=1.33) than in adults (b=1.18). In this case, an overlap and discontinuity was noticed between the phases over a carapace width range of 55 to 70 mm, where the puberty molt occurs. The majority of relationships showed that the major chela of the males grew in positive allometry, however, the greatest allometric difference between the phases was observed towards the propodus length with 1.09 as juvenile and 1.26 as adult ''b''values. In the males, this variable showed an inflection between the CW range of 45' to 55 mm, where the transition to the maturation phase occurs. The relative growth of this species is similar to those of previously studied species. This indicates, that the propodus length and the abdominal width are the morphometric variables most appropriate to estimate the size of the beginning of the sexual maturity for males and females of this species, respectively.
Resumo:
The paper evaluates the applicability of products of remote sensing in studies related to the structural conditionings of slope stability in saprolites, usually conducted through field surveys. In this article we use a regional approach concentrating on an area of lane duplication of a major highway. In that area, resistance reduction to stress and the low cohesions of muscovite saprolites - schists and gneiss which are associated to geological discontinuities, all result in inumerous instabilities. The joints and foliations were extracted from satellite images as well as aerial photographs. Following that, the study area was divided into various sectors based on the directions and dips of the foliation. Different relationships between the structures and the slopes were analyzed in order to indicate the most feasible type of slope failure in each sector of analysis. The aim of the study is to subsidize further detailed future research.