Generation of 140 fs pulse train with widely tunable repetition rate through cascaded fibre compression techniques

The authors present numerical simulations of ultrashort pulse generation by a technique of linear spectral broadening in phase modulators and compression in dispersion compensating fibre, followed by a further stage of soliton compression in dispersion shifted fibre. This laser system is predicted to generate pulses of 140 fs duration with a peak power of 1.5 kW over a wide, user selectable repetition rate range while maintaining consistent characteristics of stability and pulse quality. The use of fibre compressors and commercially available modulators is expected to make the system setup compact and cost-effective. © The Institution of Engineering and Technology 2014.

Mired in the meaning: Sustainability in consultancy

This paper explores sustainability as it relates to the services, operations and management of engineering and design (E&D) consulting firms, revealing how sustainability has been adopted by the engineering consulting industry as a key influence on its business. The motivations behind sustainability as a business priority for E&D consulting do not appear to reflect a corporate belief or endorsement of sustainability principles, but rather a reflection of market, employee and government drivers. Through interview-based reporting, the implications of these motivations are the focus of this paper through an exploration of the meaning, understanding and operationalising of sustainability in engineering design, assessment of design and in-firm management and strategy.

Wetness loss prediction for a low pressure steam turbine using computational fluid dynamics

Two-phase computational fluid dynamics modelling is used to investigate the magnitude of different contributions to the wet steam losses in a three-stage model low pressure steam turbine. The thermodynamic losses (due to irreversible heat transfer across a finite temperature difference) and the kinematic relaxation losses (due to the frictional drag of the drops) are evaluated directly from the computational fluid dynamics simulation using a concept based on entropy production rates. The braking losses (due to the impact of large drops on the rotor) are investigated by a separate numerical prediction. The simulations show that in the present case, the dominant effect is the thermodynamic loss that accounts for over 90% of the wetness losses and that both the thermodynamic and the kinematic relaxation losses depend on the droplet diameter. The numerical results are brought into context with the well-known Baumann correlation, and a comparison with available measurement data in the literature is given. The ability of the numerical approach to predict the main wetness losses is confirmed, which permits the use of computational fluid dynamics for further studies on wetness loss correlations. © IMechE 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Experimental study of the effects of temperature variation on droplet size and wetness fraction in a low-pressure model steam turbine

The three-stage low-pressure model steam turbine at the Institute of Thermal Turbomachinery and Machinery Laboratory (ITSM) was used to study the impact of three different steam inlet temperatures on the homogeneous condensation process and the resulting wetness topology. The droplet spectrum as well as the particle number concentration were measured in front of the last stage using an optical-pneumatic probe. At design load, condensation starts inside the stator of the second stage. A change in the steam inlet temperature is able to shift the location of condensation onset within the blade row up- or downstream and even into adjoining blade passages, which leads to significantly different local droplet sizes and wetness fractions due to different local expansion rates. The measured results are compared to steady three-dimensional computational fluid dynamics calculations. The predicted nucleation zones could be largely confirmed by the measurements. Although the trend of measured and calculated droplet size across the span is satisfactory, there are considerable differences between the measured and computed droplet spectrum and wetness fractions. © IMechE 2013 Reprints and permissions: sagepub.co.uk/ journalsPermissions.nav.

Effects of longer heavy vehicles on traffic congestion

Two-lane, "microscopic" (vehicle-by-vehicle) simulations of motorway traffic are developed using existing models and validated using measured data from the M25 motorway. An energy consumption model is also built in, which takes the logged trajectories of simulated vehicles as drive-cycles. The simulations are used to investigate the effects on motorway congestion and fuel consumption if "longer and/or heavier vehicles" (LHVs) were to be permitted in the UK. Baseline scenarios are simulated with traffic composed of cars, light goods vehicles and standard heavy goods vehicles (HGVs). A proportion of conventional articulated HGVs is then replaced by a smaller number of LHVs carrying the same total payload mass and volume. Four LHV configurations are investigated: an 18.75 m, 46 t longer semi-trailer (LST); 25.25 m, 50 t and 60 t B-doubles and a 34 m, 82 t A-double. Metrics for congestion, freight fleet energy consumption and car energy consumption are defined for comparing the scenarios. Finally, variation of take-up level and LHV engine power for the LST and A-double are investigated. It is concluded that: (a) LHVs should reduce congestion particularly in dense traffic, however, a low mean proportion of freight traffic on UK roads and low take-up levels will limit this effect to be almost negligible; (b) LHVs can significantly improve the energy efficiency of freight fleets, giving up to a 23% reduction in fleet energy consumption at high take-up levels; (c) the small reduction in congestion caused by LHVs could improve the fuel consumption of other road users by up to 3% in dense traffic, however in free-flowing traffic an opposite effect occurs due to higher vehicle speeds and aerodynamic losses; and (d) underpowered LHVs have potential to generate severe congestion, however current manufacturers' recommendations appear suitable. © 2013 IMechE.

Strength correlations of cement-mixed soils using data mapping

Development of comparisons and correlations between the unconfined compressive strength (UCS) and the undrained triaxial compressive strength, qu, is essential for generalising performance and optimising the design of cement-stabilised soils. This paper introduces current work in collecting and collating data from a number of research projects involving both laboratory strength tests performed on identical cement-stabilised soil samples. The research project on cement-stabilised Singapore marine clays at the National University of Singapore has been used as an example to explain the work on comparing and correlating results from both tests by normalising data and constructing contour plots. The effect of variables on strength comparison and correlations was evaluated. The variation in strength correlations was found to be dependent on a number of factors including: soil properties, cement content, curing time and stress, total water/cement ratio, confining stress and strain rate. The results showed that at ~ 100 kPa confining stress, UCS and qu, had similar magnitudes. Correlations between strengths and other design variables are discussed and presented.

Fibre optic monitoring of a deep circular excavation

This paper describes part of the monitoring undertaken at Abbey Mills shaft F, one of the main shafts of Thames Water's Lee tunnel project in London, UK. This shaft, with an external diameter of 30 m and 73 m deep, is one of the largest ever constructed in the UK and consequently penetrates layered and challenging ground conditions (Terrace Gravel, London Clay, Lambeth Group, Thanet Sand Formation, Chalk Formation). Three out of the twenty 1-2 m thick and 84 m deep diaphragm wall panels were equipped with fibre optic instrumentation. Bending and circumferential hoop strains were measured using Brillouin optical time-domain reflectometry and analysis technologies. These measurements showed that the overall radial movement of the wall was very small. Prior to excavation during a dewatering trial, the shaft may have experienced three-dimensional deformation due to differential water pressures. During excavation, the measured hoop and bending strains of the wall in the chalk exceeded the predictions. This appears to be related to the verticality tolerances of the diaphragm wall and lower circumferential hoop stiffness of the diaphragm walls at deep depths. The findings from this case study provide valuable information for future deep shafts in London. © ICE Publishing: All rights reserved.

Parameters influencing the maximum controllable current in gate commutated thyristors

The model of interconnected numerical device segments can give a prediction on the dynamic performance of large area full wafer devices such as the Gate Commutated Thyristors (GCTs) and can be used as an optimisation tool for designing GCTs. In this study the authors evaluate the relative importance of the shallow p-base thickness, its peak concentration, the depth of the p-base and the buffer peak concentration. © The Institution of Engineering and Technology 2014.

Uptake and use of electronic information services: trends in UK higher education from the JUSTEIS project

Urquhart, C., Lonsdale, R.,Thomas, R., Spink, S., Yeoman, A., Armstrong, C. & Fenton, R. (2003). Uptake and use of electronic information services: trends in UK higher education from the JUSTEIS project. Program, 37(3), 167-180. Sponsorship: JISC

Trends in use of electronic journals in higher education in the UK - views of academic staff and students

Bonthron, Karen; Urquhart, Christine; Thomas, Rhian; Armstrong, Chris; Ellis, David; Everitt, Jean; Fenton, Roger; Lonsdale, Ray; McDermott, Elizabeth; Morris, Helen; Phillips, Rebecca; Spink, Sian, and Yeoman, Alison. (2003, June). Trends in use of electronic journals in higher education in the UK - views of academic staff and students. D-Lib Magazine, 9(6). Retrieved September 8, 2006 from http://www.dlib.org/dlib/june03/urquhart/06urquhart.html This item is freely available online at http://www.dlib.org/dlib/june03/urquhart/06urquhart.html Sponsorship: JISC

Getting Constitutional Theory into Proportion: A Matter of Interpretation?

Gibbs, N., Getting Constitutional Theory into Proportion: A Matter of Interpretation?, Oxford Journal of Legal Studies, 27 (1), 175-191. RAE2008

Becoming Europeans? Attitudes, Roles and Socialisation in the European Parliament?

Scully, Roger, Becoming Europeans? Attitudes, Roles and Socialisation in the European Parliament (Oxford: Oxford University Press, 2005), pp.vii+168 RAE2008

Turnout, Participation and Legitimacy in Post-Devolution Wales

Scully, Roger, Jones, Richard Wyn, and Trystan, Dafydd, 'Turnout, Participation and Legitimacy in Post-Devolution Wales', British Journal of Political Science (2004) 34(3) pp.519-537 RAE2008

Representing Europe's Citizens? Electoral Institutions and the Failure of Parliamentary Representation

Scully, Roger, Farrell, David, Representing Europe's Citizens? Electoral Institutions and the Failure of Parliamentary Representation (Oxford: Oxford University Press, 2007), pp.xiii+230 RAE2008

Recovering a lost inheritance : The marital economy and its absence from the Prehistory of Economics in Britain

Roberts, Michael. 'Recovering a lost inheritance: the marital economy and its absence from the Prehistory of Economics in Britain', in: 'The Marital Economy in Scandinavia and Britain 1400-1900', (Eds) Argen, Maria., Erickson, Amy Louise., Farnham: Ashgate, 2005, pp.239-256 RAE2008