Morphological characterization of branched PP under stretching

FAPESP:95/56510

Ultra Thin PCC Overlays, HR-559, Construction Report, 1995

A 11.6 km (7.2 mi.) portion of IA 21 in Iowa County from the junction of US 6 north to the junction of IA 212, was selected for the research project. The project was divided into 65 different test sections of a PCC overlay of an existing asphalt concrete (AC) surface with thicknesses of 50 mm (2 in.), 100 mm (4 in.), 150 mm (6 in.), and 200 mm (8 in.). The joint spacings for these sections were 0.6 m (2 ft.), 1.2 m (4 ft.), 1.8 m (6 ft.), 3.7 m (12 ft.), and 4.6 m (15 ft.). Joints were sealed if the thickness of the pavement was over 100 mm (4 in.), unless specified. Two types of polypropylene fibers, monofilament and fibrillated, were added to the conventional PCC mix for designated sections. Three additional sections consisted of an asphalt overlay for comparison with the concrete overlay. Three different base preparations were used on the project, consisting of: patching and scarifying, patching only, and cold-in-place recycling. Sensors were placed in various test sections to measure the temperature and strain during and after construction of the overlay. Pullout tests were also conducted at various locations. Beams cylinders were made for each of the PCC mixes and tested for flexural and compressive strengths. Evaluation of the performance will be conducted through December 31, 1999.

Dimensionamento de um edifício destinado a centro de dia para idosos e creche

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Estruturas

Modified patch repair of femoral hernia after inguinal herniorrhaphy

Background and aim. It has been reported that femoral hernias are rather common after a previous repair of inguinal hernia. We herein present a modified patch repair technique for large femoral hernias that develop after a Lichtenstein operation for ipsilateral inguinal hernia. Patients and methods. The modified technique for femoral hernia was applied to three patients who had a Lichtenstein repair for inguinal hernia. All patients were male. Hernia sac is dissected completely and sent back into to the preperitoneal space. Special attention should be given to the prevascular component of the sac. It is dissected as deep as possible into the preperitoneal space over the femoral vein. The defect is quite wide in this particular type of femoral hernia following Lichtenstein repair. A prosthetic patch that matches the defect is prepared. The medial edge of the mesh is configured to correspond to the pubic corner and lacunar ligament. The lateral margin of the patch is cut to create several petals for inverting the mesh above and medial to the femoral vein to prevent prevascular herniation. The mesh is secured to inguinal ligament, ilioinguinal tract, lacunar ligament, and Cooper ligament. Few sutures are put on the pubic corner and lacunar ligament. Results. One patient was discharged after two hours, other two stayed overnight. Readmission because of seroma development was recorded in two cases where standard polypropylene meshes were used. No complication was observed in the other patient who received lightweight meshes. No early recurrences were recorded after 4, 9, and 30 months. Conclusion. Femoral recurrence after previous inguinal hernia repair seems to be a specific entity. It has a prevascular component and the hernia defect can be much larger than that of a primary femoral hernia. A patch repair with infra-inguinal approach can be a valuable alternative with low complication rate.

The lipid- and lipoprotein- [LDL-Lp(a)] apheresis techniques. Updating

Therapeutic plasmapheresis allows the extracorporeal removal of plasmatic lipoproteins (Lipid-apheresis) (LA). It can be non selective (non specific), semi - selective or selective low density lipoprotein-lipoprotein(a) (specific [LDL- Lp(a)] apheresis) (Lipoprotein apheresis, LDLa). The LDL removal rate is a perfect parameter to assess the system efficiency. Plasma-Exchange (PEX) cannot be considered either specific nor, selective. In PEX the whole blood is separated into plasma and its corpuscular components usually through centrifugation or rather filtration. The corpuscular components mixed with albumin solution plus saline (NaCl 0.9%) solution at 20%-25%, are then reinfused to the patient, to substitute the plasma formerly removed. PEX eliminates atherogenic lipoproteins, but also other essential plasma proteins, such as albumin, immunoglobulins, and hemocoagulatory mediators. Cascade filtration (CF) is a method based on plasma separation and removal of plasma proteins through double filtration. During the CF two hollow–fiber filters with pores of different diameter are used to eliminate the plasma components of different weight and molecular diameter. A CF system uses a first polypropylene filter with 0.55 µm diameter pores and a second one of diacetate of cellulose with 0.02 µm pores. The first filter separates the whole blood, and the plasma is then perfused through a second filter which allows the recovery of molecules with a diameter lower than 0.02 µm, and the removal of molecules larger in diameter as apoB100–containing lipoproteins. Since both albumin and immunoglobulins are not removed, or to a negligible extent, plasma-expanders, substitution fluids, and in particular albumin, as occurs in PEX are not needed. CF however, is characterized by lower selectivity since removes also high density lipoprotein (HDL) particles which have an antiatherogenic activity. In the 80’s, a variation of Lipid-apheresis has been developed which allows the LDL-cholesterol (LDLC) (-61%) and Lp(a) (-60%) removal from plasma through processing 3 liters of filtered plasma by means of lipid-specific thermofiltration, LDL immunoadsorption, heparin-induced LDL precipitation, LDL adsorption through dextran sulphate. More recently (90’s) the DALI®, and the Liposorber D® hemoperfusion systems, effective for apoB100- containing lipoproteins removal have been developed. All the above mentioned systems are established LDL-apheresis techniques referable to the generic definition of LDLa. However, this last definition cannot describe in an appropriate manner the removal of another highly atherogenic lipoprotein particle: the Lp(a). Thus it would be better to refer the above mentioned techniques to the wider scientific and technical concept of lipoprotein apheresis. Lipid apheresis - Lipoprotein apheresis - LDL-apheresis - Severe Dyslipidemia.

Stability of micafungin sodium solutions at different concentrations in glass bottles and syringes

International audience

Efeito da luz no crescimento de mudas de Hymenaea parvifolia Huber

Este trabalho teve como objetivo determinar o efeito da intensidade de luz no crescimento de mudas de Hymenaea parvifolia Huber., bem como inferir sobre o seu grau de tolerância à sombra. Para tal, foi instalado um experimento em delineamento inteiramente casualizado, com quatro tratamentos (níveis de luz): pleno sol (PS), 50% de sombreamento, 70% de sombreamento e sombreamento natural (SN). Os níveis de 50 e 70% de sombreamento foram obtidos com o uso de telas de polipropileno preto, e o sombreamento natural constituiu a luminosidade natural sob um dossel fechado de floresta. Cada tratamento foi constituído de 10 repetições. Plantas sob sombreamento (50% e 70% de sombreamento) apresentaram maior altura, área foliar e razão de área foliar e poucas diferenças no acúmulo de massa seca quando comparadas com plantas mantidas a pleno sol. Como conseqüência, poucas diferenças foram observadas na taxa de crescimento relativo das mudas desses tratamentos. Todavia, mudas mantidas sob sombreamento natural foram as que exibiram menor taxa de crescimento relativo e taxa assimilatória líquida. em conjunto, os resultados indicaram que Hymenaea parvifolia foi capaz de se ajustar para maximizar a aquisição de luz mesmo em condição muito limitante, como a proporcionada pelo sombreamento natural, e a produção de mudas dessa espécie vegetal pode ser realizada em viveiro desde a pleno sol, como a 50% ou 70% de sombreamento.

Estudo comparativo de nanocompósitos de polipropileno modificado sob condições de envelhecimento ambiental e acelerado

Dissertação (Mestrado em Tecnologia Nuclear)

Algunas aplicaciones de los plásticos en las industrias del empaque y automotriz

The role of plastic materials in the packaging and automotive industries is commented. Specific applications such as poly(ethylene-terephtalate) as gas barrier on the soft-drink bottle industry and low density polyethylene on the flexible packaging industry are presented. The use of polypropylene, high density polyethylene and polyamides are also mentioned.

Avaliação da abertura de filtração de geotêxteis sob confinamento e parcialmente colmatados

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2016.