Proposta de implementação da ISO 14001 em uma empresa química

Due to environmental concerns and the current legal requirements, companies are looking for ways to reconcile economic growth with environmental preservation. The purpose of this project is to show the stages of implementation of ISO 14001 in a chemical company and propose changes in chemical procedures creating goals to be achieved. In this paper, the study for the implementation of ISO 14001 is in Viapol ltda., where the lack of environmental management can cause enormous impact to the environment and may generate air, soil and water pollution. The project resulted in a mapping of all the processes and a broad survey of waste and emissions, generating proposals to change some of the processes and and creating programs to achieve the goals and objectives proposed in the Environmental Policy. Adopting an environmental management system (EMS), the company will reduce costs by decreasing the amount of raw material used, shooting down on waste disposal and the amount of it, and increasing productivity. By committing to the implementation of the EMS, companies will be demonstrating a proactive approach to environmental issues and enrich its image to consumers’ point of view

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

O Sistema de Gestão Ambiental e sua contribuição socioambiental para a biblioteca central da UNESP, Campus Rio Claro/SP

The minimization and mitigation of environmental impacts caused by the activities of organizations is increasingly becoming a key concern due to factors such as market demand, including suppliers and consumer markets, quality standards and even marketing strategies. The implementation of an EMS - Environmental Management System - allows the organization to achieve the level of environmental performance for its determined and promotes continuous improvement over time. This system consists of a schedule of activities, so as to eliminate or minimize impacts to the environment through preventive actions. It also provides a structured approach to set and achieve goals and objectives, and to establish procedures, work instructions and control, ensuring that the implementation of the policy can become reality. The objective of this work consists in planning a system using environmental management based on the ISO 14001 - standard internationally more widespread and accepted in the requirements to establish and operate an EMS - the Central Library, UNESP, Rio Claro / SP to stimulate the quest for continuous improvement and sustainability in the educational institution. For making the diagnosis of this planning was used the PDCA methodology, suggested by the standard, as well as all requirements for compliance. The results show that the benefits that the organization will receive involve reducing expenses and cost of energy and water, and improve the organization's reputation before the whole university and other educational institutions, reaching about three thousand people on university

Análise da ABNT NBR ISO 14005:2012 como instrumento de implementação de sistemas de gestão ambiental em pequenas e médias empresas

The use of environmental management systems - EMS has shown to be a key tool for addressing the environmental aspects and impacts of an organization. The vast majority of EMS based on the requirements of ISO 14001:2004, as it is a globally recognized standard and adopt its recommendations is considered to be a guarantee of fulfilling the basic requirements of an EMS. Despite all the benefits that the system provides, we still find many problems in the implementation of EMS, especially in small and medium enterprises or SME. Most of the difficulties of implementation is related to intrinsic factors that companies of this size have, and issues related to the models and methods used to implement an EMS. Thus, this work aimed to assess whether the guidelines of ISO 14005:2012 meet the needs of SMEs for the effective implementation of an environmental management system. For it has been identified in the relation between SMEs and EMS the majof intrinsic problems of SMEs to implement (PII), such as lack of financial and human resources, and lack of commitment from top management to the SGA. Also was also pointed the main implementation issues related to ISO 14001 (ABNT, 2004) or the models or methods (PIM), highlighting the lack of environmental performance criteria, and the need for a path or sequence of steps for implementation. The study of ISO 14005 (ABNT, 2012) showed that the standard guidelines and implementation examples proposed, include solutions for all problems related to EMS implementation SMEs

Aplicação de sistema de gestão da qualidade na execução de obras de pavimentação asfáltica, baseado nas diretrizes da ABNT NBR ISO 9001:2008

This work brings to its content proposed deployment of a system of quality management in paving asphalt based on the elaboration of a basic training to meet those entering this area of civil engineering at a technical manual for the implementation of major services running on paving of roads. The training was designed to serve both those entering the field of asphalt paving, synthesizing the complex processes involved in paving services and providing an overview of the steps in implementation thereof, as well as entrants must meet the enterprise user of this system, providing them an idea of the method used by the company designing the paving of roads. The technical manual presented in turn, has 8 (eight) of the main services components of a work of paving, which are: Mobilization and Maintenance of construction site, Regularization and subfloor preparation, execution or sub-base BGS base (graded gravel plain), Execution of sub-base or base BGTC (graded gravel treated with cement), Implementation of subbase or base Macadam hydraulic Priming bituminous waterproofing, asphalt binder Priming and finally the execution flexible pavement - HMA (hot milled asphalt concrete). These services are presented in the form of IT-Education work, this seven items are presented that guide the performance of services, thus providing overall guidelines to perform the services described in it. The development of IT's was based on experiences in day-to-day paving near the theoretical precepts presented in the literature, so the conditions specified in these documents aim to always guide the implementation of services in general, giving the process a versatility major operation, as this work takes into account the dynamics of such services, as well as the variety of their execution according to local conditions and specified in the project. So in general we can say that this ... (Complete abstract click electronic access below)

Propriedades físico-químicas e mecânicas, potencial bioativo e caracterização da interface dentina-cimento de cimentos endodônticos experimentais à base de cimento Portland associados à radiopacificadores micro e nanoparticulados

Pós-graduação em Odontologia - FOAR

As interações da ISO 26000 com a responsabilidade social e o Serviço Social nas organizações calçadista: estudo de caso

Pós-graduação em Serviço Social - FCHS

Efeito de protocolos de jateamento na resistência à flexão e transformação de fase cristalina em cerâmicas de Y-TZP

Pós-graduação em Odontologia Restauradora - ICT

Recomendações para criação e gerenciamento de um sistema da qualidade em empresas de autopeças

This paper addresses the difficulties and best practices of a quality system of an automotive parts company. In it will be discussed the features and benefits of the proper use of a system of management and quality assurance. It emphasizes the proper use of tools and methodologies that aim improving the quality of processes and products. It also has some guidance information given by the standards of quality which helps the implementation of the quality system and the standards are important because it attests to the quality of companies. So, this work has as objective to guide the creation and management of the quality system in auto parts companies, which seek an increase in the quality of products and processes, it also helps to certify companies in the current quality standard for the sector, ISO TS 16949, and thus increases the competitiveness of companies in this market. As result, this paper resumes good practices, difficulties and key steps for creating and managing a quality system

Um estudo sobre a influência do sistema de gestão ambiental ISO 14001 sobre a imagem de organizações industriais e o papel das relações públicas

The consumers' requirements are constantly growing, as well as the concern for the environment. Considering this change of scenario, industrial companies started paying more attention to environmental issues and decided to resort to solutions such as the adoption of the Environmental Management System based on the ISO 14001 model. It is believed that the adoption of this model changes the organizational image, both internally and externally. This possible change was the focus of this research, considering that many publics related to certified companies may have the wrong idea about what being a green company really means. The objective of this study is to verify, through a survey research, the relation between the Environmental Management System based on ISO 14001 with organizational image of Brazilian firms. At first, this paper presents a theoretical review on Environmental Management System, IS0 14001, Organizational image, green Marketing, Greenwashing and Public Relations. Next, the research method is presented, as well as the results obtained through theoretical study, the research application and data analysis, and a brief analysis of the Public Relations' role in the organizational environment at issue. Finally, it presents the results obtained by tabulating the questionnaires, analysis of related data, and consideration about these

Impacto da energia de micro-ondas na sinterização da zircônia odontológica

Pós-graduação em Odontologia Restauradora - ICT

Antixenosis of bean genotypes to Chrysodeixis includens (Lepidoptera: Noctuidae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Green Manufacturing: Relationship between Adoption of Green Operational Practices and Green Performance of Brazilian ISO 9001-Certified Firms

The present work aims at analyzing how the adoption of a proactive environmental management via green operational practices (GOPs) correlates to the Green Performance (GrP) of a given set of ISO 9001-certified firms in Brazil. To this end, we elaborated a conceptual framework about environmental management, GOPs, and GrP Such theoretical foundation supported the development of empirical research through quantitative analysis. For the analysis, 75 questionnaires were collected from ISO 9001 certified companies. Data was analyzed by with statistical tools such as descriptive analysis, correlation analysis, and Structural Equation Modeling (SEM). The results demonstrate that the adoption of GOPs, in fact, exerts a positive impact on the GrP of the firms. This work contributes to a better understanding of green manufacturing in Brazil's industrial sector

Quality management, environmental management maturity, green supply chain practices and green performance of Brazilian companies with ISO 14001 certification: Direct and indirect effects (Reprint from vol 67C, pg 39-51)

This study aims to test a new conceptual model based on the relationship between quality management (QM), environmental management maturity (EMM), adoption of external practices of green supply chain management (GSCM) (green purchasing and collaboration with customers) and green performance (GP) with data from 95 Brazilian firms with ISO 14001. To our knowledge, such links and relationships are not simultaneously identified and tested in the literature. The results indicate the validation of all of the research hypotheses. This paper highlights that an improvement in green performance will require attention to quality management, environmental management maturity, and green supply chain.

Genetic heterogeneity of Escherichia coli isolated from pasteurized milk in State of Paraná, Brazil

Food contamination caused by enteric pathogens is a major cause of diarrheal disease worldwide, resulting in high morbidity and mortality and significant economic losses. Bacteria are important agents of foodborne diseases, particularly diarrheagenic Escherichia coli. The present study assessed the genetic diversity and antimicrobial resistance of E. coli isolates from pasteurized milk processed in 21 dairies in northwestern State of Parana, Brazil. The 95 E. coli isolates were subjected to antimicrobial susceptibility testing according to the recommendations of the Clinical and Laboratory Standards Institute and assessed genotypically by Enterobacterial Repetitive Intergenic Consensus-Polymerase Chain Reaction (ERIC-PCR). The highest rate of resistance was observed for cephalothin (55.78%). ERIC-PCR revealed high genetic diversity, clustering the 95 bacterial isolates into 90 different genotypic patterns. These results showed a heterogeneous population of E. coli in milk samples produced in the northwestern region of Parana and the need for good manufacturing practices throughout the processing of pasteurized milk to reduce the risk of foodborne illnesses.