Análise de desempenho de um protocolo BitTorrent ciente de localização em redes corporativas.

Hoje em dia, distribuições de grandes volumes de dados por redes TCP/IP corporativas trazem problemas como a alta utilização da rede e de servidores, longos períodos para conclusão e maior sensibilidade a falhas na infraestrutura de rede. Estes problemas podem ser reduzidos com utilização de redes par-a-par (P2P). O objetivo desta dissertação é analisar o desempenho do protocolo BitTorrent padrão em redes corporativas e também realizar a análise após uma modificação no comportamento padrão do protocolo BitTorrent. Nesta modificação, o rastreador identifica o endereço IP do par que está solicitando a lista de endereços IP do enxame e envia somente aqueles pertencentes à mesma rede local e ao semeador original, com o objetivo de reduzir o tráfego em redes de longa distância. Em cenários corporativos típicos, as simulações mostraram que a alteração é capaz de reduzir o consumo médio de banda e o tempo médio dos downloads, quando comparados ao BitTorrent padrão, além de conferir maior robustez à distribuição em casos de falhas em enlaces de longa distância. As simulações mostraram também que em ambientes mais complexos, com muitos clientes, e onde a restrição de banda em enlaces de longa distância provoca congestionamento e descartes, o desempenho do protocolo BitTorrent padrão pode ser semelhante a uma distribuição em arquitetura cliente-servidor. Neste último caso, a modificação proposta mostrou resultados consistentes de melhoria do desempenho da distribuição.

Efeito do tratamento com a proteína quimérica IL-13PE sobre a inflamação pulmonar induzida por partículas de sílica em camundongos

A interleucina 13 (IL-13) tem sido apontada como um dos principais mediadores em processos de ativação de fibroblastos e indução de fibrose pulmonar, sendo, portanto, considerada como um alvo terapêutico importante. A silicose é uma doença pulmonar inflamatória crônica, de caráter ocupacional, caracterizada por uma intensa resposta fibrótica e granulomatosa. Com base nestas observações, tivemos por objetivo investigar o potencial efeito da administração da imunotoxina IL-13-PE38QQR (IL-13PE) sobre o modelo de silicose em camundongos. Camundongos Swiss-Webster foram anestesiados e instilados intranasalmente com partículas de sílica (10 mg), sendo a administração da IL-13PE (200ng/dia) realizada por via intranasal, uma vez ao dia em dias alternados no período entre 21 a 27 dias após a provocação. Analisamos o componente inflamatório, a deposição de colágeno e a área de granuloma avaliados através de técnicas clássicas de histologia, incluindo coloração com H&E e Picrus-sirius, ou ainda a quantificação do conteúdo de colágeno por Sircol. Os componentes de matriz extracelular fibronectina e laminina foram avaliados através de imunohistoquímica. Citocinas e quimiocinas foram quantificadas por sistema de ELISA. As medidas de função pulmonar e resposta de hiperreatividade foram realizadas através do sistema de pletismografia de corpo inteiro invasiva. Verificamos que o tratamento curativo com a IL-13PE inibiu de forma acentuada o comprometimento da função pulmonar nos camundongos silicóticos, incluindo tanto aumento da resistência como da elastância, assim como a resposta de hiperratividade das vias aéreas ao agente broncoconstrictor metacolina. De forma coerente, os animais silicóticos quando submetidos ao tratamento com IL-13PE apresentaram marcada redução do componente inflamatório pulmonar e da resposta fibrótica, atestado pela diminuição na produção de colágeno, laminina e fibronectina e redução importante da área de granuloma. De forma semelhante, as citocinas (TNF-α e TGF-) e quimiocinas (MIP-1α, MIP-2, TARC, IP-10, MDC) detectadas em quantidade aumentada no pulmão de animais silicóticos foram reduzidas pelo tratamento com a IL-13PE. Em conclusão, nossos resultados mostram que a administração curativa da IL-13PE foi capaz de inibir os componentes inflamatórios e fibróticos da fase crônica do quadro silicótico em camundongos, o que se refletiu de forma clara na melhora da função pulmonar. Em conjunto, nossos achados indicam que a utilização da IL13PE parece constituir uma abordagem terapêutica extremamente promissora para aplicação em casos de doenças crônicas de natureza fibrótica como a silicose.

Diffusion and chemical reaction in the porous structures of solid oxide fuel cells

The Rolls-Royce Integrated-Planar Solid Oxide Fuel Cell (IP-SOFC) consists of ceramic modules which have electrochemical cells printed on the outer surfaces. The cathodes are the outermost layer of each cell and are supplied with oxygen from air flowing over the outside of the module. The anodes are in direct contact with the ceramic structure and are supplied with fuel from internal gas channels. Natural gas is reformed into hydrogen for use by the fuel cells in a separate reformer module of similar design except that the fuel cells are replaced by a reforming catalyst layer. The performance of the modules is intrinsically linked to the behaviour of the gas flows within their porous structures. Because the porous layers are very thin, a one-dimensional flow model provides a good representation of the flow property variations between fuel channel and fuel cell or reforming catalyst. The multi-component convective-diffusive flows are simulated using a new theory of flow in porous material, the Cylindrical Pore Interpolation Model. The effects of the catalysed methane reforming and water-gas shift chemical reactions are also considered using appropriate kinetic models. It is found that the shift reaction, which is catalysed by the anode material, has certain beneficial effects on the fuel cell module performance. In the reformer module it was found that the flow resistance of the porous support structure makes it difficult to sustain a high methane conversion rate. Although the analysis is based on IP-SOFC geometry, the modelling approach and general conclusions are applicable to other types of SOFC.

Friction of sliding surfaces carrying adsorbed lubricant layers

In concentrated contacts the behaviour of lubricants is much modified by the high local pressures: changes can arise both from molecular ordering within the very thin film lubricant layers present at the interface as well as from the deposition on the component surfaces of more solid-like polymeric boundary layers. These 'third bodies' separating the solid surfaces may have rheological or mechanical properties very different from those observed in the bulk. Classical elasto-hydrodynamic theory considers the entrapped lubricant to exhibit a piezo-viscous behaviour while the conventional picture of more solid boundary lubricant layers views their shear strength r as being linearly dependent on local pressure p, so that T = TO + ap where TO and a are constants. If TO is relatively small, then the coefficient of friction \i = T Ip ~ a and so Amonton's laws are recovered. However, the properties of adsorbed or deposited surface films, or indeed other third bodies such as debris layers, may be more complex than this. A preliminary study has looked quantitatively at the influence of the pressure dependence of the shear strength of any surface layer on the overall friction coefficient of a contact which is made up of an array of asperities whose height varies in a Gaussian manner. Individual contact points may be elastic or plastic. The analysis results in plots of coefficient of friction versus the service or load parameter PIH&NRa where P is the nominal pressure on the contact, HS the hardness of the deforming surface, N the asperity density, R the mean radius of curvature of the asperities, and a is the standard deviation of their height distribution. In principle, any variation oft withp can be incorporated into the model; however, in this initial study we have used data on colloidal suspensions from the group at the Ecole Centrale de Lyon as well as examining the effect of functional relationships of somewhat greater complexity than a simple linear form. Results of the analysis indicate that variations in fj. are possible as the load is varied which depend on the statistical spread of behaviour at individual asperity contacts. The value of this analysis is that it attempts to combine the behaviour of films on the molecular scale with the topography of real engineering surfaces and so give an indication of the effects at the full-size or macro-scale that can be achieved by chemical or molecular surface engineering.

Food habits of Oxygaster bacaila (Ham.) from Kaptai Lake, Bangladesh

Gut contents of 120 Oxygaster bacaila fmm Kaptai Lake were studied. Index of preponderance (IP) indicated that 0. bacaila consumed highest amount of Insects (35.89%) and thus occupied the first position among the food items. Zooplankton (Rmifera and crustacea 31.79%) and the other food items found in the guts were algae (Chlorophyceae, Bacillariophyceae, Euglenophyceae and Cyanophyceae 24.51%). From the analysis of gut contents, this fish might be considered as omnivore as it consumed both animal and plant foods with higher preference for animal food. The feeding intensity of this fish is fairly high. Total length (TL) versus gut length (GL) relationship and their ratio were found to be GL = 0.57663 TLL04801 (r = 0.9963) and TL: GL = l: 0.7086 respectively.

Free space adaptive optical interconnect, using a ferroelectric liquid crystal SLM for beam steering

A free-space, board-to-board, adaptive optical interconnect demonstrator has been developed. Binary phase gratings displayed on a Ferroelectric Liquid Crystal Spatial Light Modulator are used to maintain data transfer at 1.25Gbps, given varying optical misalignment © 2005 Optical Society of America.

Experimental pathogenesis of Aeromonas hydrophila bacteria in shing Heteropneustes fossilis(Bloch)

Pathogenicity of Aeromonas hydrophila bacteria was tested on the stinging catfish Heteropneustes fossilis. Before artificial infection the morphological, biochemical and physiological characters of Aeromonas hydrophila were studied. The infections were done by two different methods, viz., intramuscular (IM) and intraperitoneal (IP) injection. In infection experiment, each group of 10 fish were injected either intramuscularly or intra peritoneally with one dose higher than the LD50 dose (9.6 x 107 CFU/fish). All the fish tested died within 1 to 9 days. Both in cases of intramuscular and intraperitoneal injection, external pathology were found. Haemorrhagic lesions were evident at the site of injection. The posterior end of the body surface was found to develop greyish-white lesion that was extended up to caudal fin. Hyperemic anal region and the fin bases were also observed. Total bacterial loads in liver, kidney and intestine were determined. Aeromonas hydrophila could be isolated from liver, kidney and intestine of the experimentally infected fish. In case of intramuscular injection the highest and the lowest bacterial load was found to be 2.4 x 107 CFU/g of liver and 2.1 x 102 CFU/g of kidney and in case of intraperitoneal injection they were found to be 3.6 x 106 CFU/g of kidney and 1.2 x 104 CFU/g of kidney respectively. It was concluded that A. hydrophila could cause serious disease condition to Heteropneustes fossilis and its pathogenesis in the fish was also very efficient.

Natural diet of penaeid prawns in the coastal waters of Mumbai

Foregut contents of eight commercially important species of penaied prawns namely Penaeus merguiensis, Metapenaeus affinis, M. monoceros, M. brevicornis, Parapenaeopsis stylifera, P. hardwickii, P. sculptilis and Solenocera crassicornis were investigated from inshore, nearshore and offshore fishing grounds of Mumbai. Feeding intensity and index of preponderance (IP) of the dietary items were compared statistically for the species, sexes, fishing areas and maturity condition of females. All the species except M. monoceros and P. sculptilis showed that females were better fed than males. The feeding intensity in the three depth-zones was different for M. affinis, M. brevicornis, M. monoceros, P. hardwickii and S. crassicornis, and uniform for P. merguiensis, P. stylifera and P. sculptilis. Acetes spp., prawn remains, polychaetes, benthic crustaceans, foraminifers and fish remains were the important food items of the prawns. Dietary comparison between the two sexes of the species did not show any difference, but mature females of M. monoceros and P. sculptilis had different diets. Comparison of food items for all the species together showed significant difference between the three areas. Crustacean diet was the favorite in the inshore and nearshore, and polychaetes in the offshore waters. All the species except P. hardwickii showed difference in their dietary composition in the three depth-zones. It is concluded that these coexisting species are primarily carnivorous and exhibit diverse food preferences in different depth-zones by browsing on interstitial organisms, chasing epipelagic prey, raptorial predation, scavenging on dead organisms or adopting different temporal abundance to avoid inter-specific competition for food.

贵州绵羊线粒体DNA (m tDNA ) 多态性研究

采用15 种限制性内切酶对贵州威宁绵羊和六盘水绵羊各5 只个体的m tD2 NA 多态性进行研究。其中只有BamHÉ 一种酶的酶切类型表现多态, 产生三种酶切 类型。共得到17 种限制性态型, 可归结为三种m tDNA 单倍型, 在威宁绵羊中单倍 型É 所占比较较大(80% ) , 单倍型Ë 只占20% , 而在六盘水绵羊中则单倍型É 和Ê 所占比例相当; 根据单倍型在群体中的分布和单倍型间遗传距离, 推测贵州绵羊的 m tDNA 单倍型É 和Ê 可能代表两个母系祖先的基本单倍型, 其分化时间约有16～ 32 万年之久, 单倍型Ë 则可能是由单倍型É 随机突变而来; 两个地方绵羊群体间的 分化时间大约为613～ 1216 万年, 群体间的m tDNA 遗传多态度较低, 但六盘水绵羊 群体内遗传多态度比威宁绵羊较丰富。