Flavour retention during high temperature short time extrusion cooking process: a review

Research on the stability of flavours during high temperature extrusion cooking is reviewed. The important factors that affect flavour and aroma retention during the process of extrusion are illustrated. A substantial number of flavour volatiles which are incorporated prior to extrusion are normally lost during expansion, this is because of steam distillation. Therefore, a general practice has been to introduce a flavour mix after the extrusion process. This extra operation requires a binding agent (normally oil), and may also result in a non-uniform distribution of the flavour and low oxidative stability of the flavours exposed on the surface. Therefore, the importance of encapsulated flavours, particularly the beta -cyclodextrin-flavour complex, is highlighted in this paper.

Coupled experimental and thermodynamic study of the Zn-Fe-Si-O system

Experimental and thermodynamic modeling studies have been carried out on the Zn-Fe-Si-O system. This research is part of a wider program to characterize zinc/lead industrial slags and sinters in the PbO-ZnO-SiO2-CaO-FeO-Fe2O3 system. Experimental investigations involve high-temperature equilibration and quenching techniques followed by electron probe X-ray microanalysis (EPMA). Liquidus temperatures and solid solubilities of the crystalline phases were measured in the temperature range from 1200 °C to 1450 °C (1473 to 1723 K) in the zinc ferrite, zincite, willemite, and tridymite primary-phase fields in the Zn-Fe-Si-O system in air. These equilibrium data for the Zn-Fe-Si-O system in air, combined with previously reported data for this system, were used to obtain an optimized self-consistent set of parameters of thermodynamic models for all phases.

Exploring through cover - the integrated interpretation of high resolution aeromagnetic, airborne electromagnetic and ground gravity data from the Grant's Patch area, Eastern Goldfields Province, Archaean Yigarn Craton Part B; Gravity inversion as a

The cost and risk associated with mineral exploration in Australia increases significantly as companies move into deeper regolith-covered terrain. The ability to map the bedrock and the depth of weathering within an area has the potential to decrease this risk and increase the effectiveness of exploration programs. This paper is the second in a trilogy concerning the Grant's Patch area of the Eastern Goldfields. The recent development of the VPmg potential field inversion program in conjunction with the acquisition of high-resolution gravity data over an area with extensive drilling provided an opportunity to evaluate three-dimensional gravity inversion as a bedrock and regolith mapping tool. An apparent density model of the study area was constructed, with the ground represented as adjoining 200 m by 200 m vertical rectangular prisms. During inversion VPmg incrementally adjusted the density of each prism until the free-air gravity response of the model replicated the observed data. For the Grant's Patch study area, this image of the apparent density values proved easier to interpret than the Bouguer gravity image. A regolith layer was introduced into the model and realistic fresh-rock densities assigned to each basement prism according to its interpreted lithology. With the basement and regolith densities fixed, the VPmg inversion algorithm adjusted the depth to fresh basement until the misfit between the calculated and observed gravity response was minimised. The resulting geometry of the bedrock/regolith contact largely replicated the base of weathering indicated by drilling with predicted depth of weathering values from gravity inversion typically within 15% of those logged during RAB and RC drilling.

A high efficient and consistent method for harvesting large volumes of high-titre lentiviral vectors

Lentiviral vectors pseudotyped with vesicular stomatitis virus glycoprotein (VSV-G) are emerging as the vectors of choice for in vitro and in vivo gene therapy studies. However, the current method for harvesting lentivectors relies upon ultracentrifugation at 50 000 g for 2 h. At this ultra-high speed, rotors currently in use generally have small volume capacity. Therefore, preparations of large volumes of high-titre vectors are time-consuming and laborious to perform. In the present study, viral vector supernatant harvests from vector-producing cells (VPCs) were pre-treated with various amounts of poly-L-lysine (PLL) and concentrated by low speed centrifugation. Optimal conditions were established when 0.005% of PLL (w/v) was added to vector supernatant harvests, followed by incubation for 30 min and centrifugation at 10 000 g for 2 h at 4 degreesC. Direct comparison with ultracentrifugation demonstrated that the new method consistently produced larger volumes (6 ml) of high-titre viral vector at 1 x 10(8) transduction unit (TU)/ml (from about 3000 ml of supernatant) in one round of concentration. Electron microscopic analysis showed that PLL/viral vector formed complexes, which probably facilitated easy precipitation at low-speed concentration (10 000 g), a speed which does not usually precipitate viral particles efficiently. Transfection of several cell lines in vitro and transduction in vivo in the liver with the lentivector/PLL complexes demonstrated efficient gene transfer without any significant signs of toxicity. These results suggest that the new method provides a convenient means for harvesting large volumes of high-titre lentivectors, facilitate gene therapy experiments in large animal or human gene therapy trials, in which large amounts of lentiviral vectors are a prerequisite.

What's new in hemochromatosis

Hereditary hemochromatosis (HHC) is an inherited disorder of iron metabolism affecting approximately 1 in 200-300 individuals of Northern European descent. Over time, the continued deposition of iron in parenchymal cells of many organs can eventually lead to diabetes mellitus, cardiomyopathy, and hepatic cirrhosis, the last of which is frequently followed by hepatocellular carcinoma. Although the complications of HHC can be devastating, its clinical management is simple and effective if the disease is identified early in its progression. The recent elucidation of the HFE gene has provided insight into the pathogenesis of HHC and provided a means for the early identification of individuals in whom HHC may develop. Two mutations have been implicated in HHC: C282Y and H63D, The former occurs in a homozygous state seen in 75-100% of patients with HHC. The high correlation of HFE to HHC has caused it to be considered as a candidate gene for population-based genetic testing for diagnosis and detection of predisposition to HHC. In addition, mechanisms of iron transport and metabolism are unfolding and are providing clues to the enigma of iron homeostasis and the pathophysiology of iron overload, (C) 2001 Lippincott Williams & Wilkins, Inc.

High prevalence of asthma in five remote indigenous communities in Australia

Data on the prevalence of asthma in children residing in remote indigenous communities in Australia are sparse, despite the many reports of high prevalence in nonindigenous children of this country. Two previous Australian studies have had poor participation rates, limiting interpretation of their results. A study of children in the Torres Strait and Northern Peninsula Area of Australia was conducted to document the prevalence of asthma symptoms. Five indigenous communities were randomly selected and trained interviewers, who were local indigenous health workers, recruited participants using a house-by-house approach. Information was collected by a structured face-to-face interview based on standardized questionnaire constructed from the protocol International Study of Asthma and Allergy in Childhood; 1,650 children were included in the study with a 98% response rate. Overall, the prevalence of self-reported ever wheezing was 21%,; 12% reported wheezing in the previous year; and 16%, reported ever having asthma, There was significant variation in the prevalence of asthma symptoms between communities. It is concluded that there are significant intercommunity variations in the prevalence of asthma symptoms in remote communities and that the prevalence in these communities is as high as in nonindigenous groups.

Species dependence for binding of small molecule agonist and antagonists to the C5a receptor on polymorphonuclear leukocytes

This study investigated the receptor binding affinities of a C5a agonist and cyclic antagonists for polymorphonuclear leukocytes (PMNs) isolated from human, sheep, pig, dog, rabbit, guinea pig, rat and mouse. The affinities of the two small molecule antagonists, F-[OPdChaWR] and AcF-[OPdChaWR], and the agonist, YSFKPMPLaR, revealed large differences in C5a receptor (C5aR) affinities between species. The antagonists bound to human, rat and dog PMNs with similar high affinities, but with lower affinities to PMNs from all other species. The C5a agonist also bound with varying affinities between species, but showed a different affinity profile to the antagonists. In contrast, recombinant human C5a had similar affinity for PMNs of all species investigated. The low correlation between the affinities of the antagonists and the agonist between species either suggests that different receptor residues are important for distinguishing between agonist/antagonist binding, or that the agonist and antagonist peptides bind to two distinct sites within the C5aR.

The stochastic design of force-minimized compact magnets for high-field magnetic resonance imaging applications

New designs for force-minimized compact high-field clinical MRI magnets are described. The design method is a modified simulated annealing (SA) procedure which includes Maxwell forces in the error function to be minimized. This permits an automated force reduction in the magnet designs while controlling the overall dimensions of the system. As SA optimization requires many iterations to achieve a final design, it is important that each iteration in the procedure is rapid. We have therefore developed a rapid force calculation algorithm. Novel designs for short 3- and 4-T clinical MRI systems are presented in which force reduction has been invoked. The final designs provide large homogeneous regions and reduced stray fields in remarkable short magnets. A shielded 4-T design that is approximately 30% shorter than current designs is presented. This novel magnet generates a full 50-cm diameter homogeneous region.