Electrical investigation of p-type 4H-SiC heavily doped by ion implantation

In the last decades, an increasing interest in the research field of wide bandgap semiconductors was observed, mostly due to the progressive approaching of silicon-based devices to their theoretical limits. 4H-SiC is an example among these, and is a mature compound for applications. The main advantages offered 4H-SiC in comparison with silicon are an higher breakdown field, an higher thermal conductivity, a higher operating temperature, very high hardness and melting point, biocompatibility, but also low switching losses in high frequencies applications and lower on-resistances in unipolar devices. Then, 4H-SiC power devices offer great performance improvement; moreover, they can work in hostile environments where silicon power devices cannot function. Ion implantation technology is a key process in the fabrication of almost all kinds of SiC devices, owing to the advantage of a spatially selective doping. This work is dedicated to the electrical investigation of several differently-processed 4H-SiC ion- implanted samples, mainly through Hall effect and space charge spectroscopy experiments. It was also developed the automatic control (Labview) of several experiments. In the work, the effectiveness of high temperature post-implant thermal treatments (up to 2000°C) were studied and compared considering: (i) different methods, (ii) different temperatures and (iii) different duration of the annealing process. Preliminary p + /n and Schottky junctions were also investigated as simple test devices. 1) Heavy doping by ion implantation of single off-axis 4H-SiC layers The electrical investigation is one of the most important characterization of ion-implanted samples, which must be submitted to mandatory post-implant thermal treatment in order to both (i) recover the lattice after ion bombardment, and (ii) address the implanted impurities into lattice sites so that they can effectively act as dopants. Electrical investigation can give fundamental information on the efficiency of the electrical impurity activation. To understand the results of the research it should be noted that: (a) To realize good ohmic contacts it is necessary to obtain spatially defined highly doped regions, which must have conductivity as low as possible. (b) It has been shown that the electrical activation efficiency and the electrical conductivity increase with the annealing temperature increasing. (c) To maximize the layer conductivity, temperatures around 1700°C are generally used and implantation density high till to 10 21 cm -3 . In this work, an original approach, different from (c), is explored by the using very high annealing temperature, around 2000°C, on samples of Al + -implant concentration of the order of 10 20 cm -3 . Several Al + -implanted 4H-SiC samples, resulting of p-type conductivity, were investigated, with a nominal density varying in the range of about 1-5∙10 20 cm -3 and subjected to two different high temperature thermal treatments. One annealing method uses a radiofrequency heated furnace till to 1950°C (Conventional Annealing, CA), the other exploits a microwave field, providing a fast heating rate up to 2000°C (Micro-Wave Annealing, MWA). In this contest, mainly ion implanted p-type samples were investigated, both off-axis and on-axis <0001> semi-insulating 4H-SiC. Concerning p-type off-axis samples, a high electrical activation of implanted Al (50-70%) and a compensation ratio below 10% were estimated. In the work, the main sample processing parameters have been varied, as the implant temperature, CA annealing duration, and heating/cooling rates, and the best values assessed. MWA method leads to higher hole density and lower mobility than CA in equivalent ion implanted layers, resulting in lower resistivity, probably related to the 50°C higher annealing temperature. An optimal duration of the CA treatment was estimated in about 12-13 minutes. A RT resistivity on the lowest reported in literature for this kind of samples, has been obtained. 2) Low resistivity data: variable range hopping Notwithstanding the heavy p-type doping levels, the carrier density remained less than the critical one required for a semiconductor to metal transition. However, the high carrier densities obtained was enough to trigger a low temperature impurity band (IB) conduction. In the heaviest doped samples, such a conduction mechanism persists till to RT, without significantly prejudice the mobility values. This feature can have an interesting technological fall, because it guarantee a nearly temperature- independent carrier density, it being not affected by freeze-out effects. The usual transport mechanism occurring in the IB conduction is the nearest neighbor hopping: such a regime is effectively consistent with the resistivity temperature behavior of the lowest doped samples. In the heavier doped samples, however, a trend of the resistivity data compatible with a variable range hopping (VRH) conduction has been pointed out, here highlighted for the first time in p-type 4H-SiC. Even more: in the heaviest doped samples, and in particular, in those annealed by MWA, the temperature dependence of the resistivity data is consistent with a reduced dimensionality (2D) of the VRH conduction. In these samples, TEM investigation pointed out faulted dislocation loops in the basal plane, whose average spacing along the c-axis is comparable with the optimal length of the hops in the VRH transport. This result suggested the assignment of such a peculiar behavior to a kind of spatial confinement into a plane of the carrier hops. 3) Test device the p + -n junction In the last part of the work, the electrical properties of 4H-SiC diodes were also studied. In this case, a heavy Al + ion implantation was realized on n-type epilayers, according to the technological process applied for final devices. Good rectification properties was shown from these preliminary devices in their current-voltage characteristics. Admittance spectroscopy and deep level transient spectroscopy measurements showed the presence of electrically active defects other than the dopants ones, induced in the active region of the diodes by ion implantation. A critical comparison with the literature of these defects was performed. Preliminary to such an investigation, it was assessed the experimental set up for the admittance spectroscopy and current-voltage investigation and the automatic control of these measurements.

Ion heating in transitions to CERC in the stellarator TJ-II

In TJ-II stellarator plasmas, in the electron cyclotron heating regime, an increase in the ion temperature is observed, synchronized with that of the electron temperature, during the transition to the core electron-root confinement (CERC) regime. This rise in ion temperature should be attributed to the joint action of the electron–ion energy transfer (which changes slightly during the CERC formation) and an enhancement of the ion confinement. This improvement must be related to the increase in the positive electric field in the core region. In this paper, we confirm this hypothesis by estimating the ion collisional transport in TJ-II under the physical conditions established before and after the transition to CERC. We calculate a large number of ion orbits in the guiding-centre approximation considering the collisions with a background plasma composed of electrons and ions. The ion temperature profile and the thermal flux are calculated in a self-consistent way, so that the change in the ion heat transport can be assessed.

Bioactive compounds and physical and chemical characteristics of mini tomatoes: influence of postharvest treatments

Tomatoes are among the most cultivated and used vegetables in the world. They are very succeptible to post harvest losses due to high perishability, therefore the use of postharvest treatments may contribute to conservation of this fruit, however the treatments might affect significantly physico-chemical, sensory and nutritional characteristics of tomatoes. Given the perishability of tomato and the economic importance of small tomato fruits, the purpose of the present study was to determine the effect of gamma radiation, carnauba coating and 1-MCP treatments on tomato fruit quality during storage. The study may be divided into two parts. In the first, mini tomatoes cv. Sweet Grape were harvested at breaker stage, divided into 4 grous and treated with gamma radiation (0.6 kGy), carnauba coating (1 L 1000 kg-1) and 1-MCP (500 nL L-1) and then stored at 25±2°C for 30 days with a control group of tomatoes. In the seconnd part, tomatoes harvested at light-red stage were submitted to the same treatments and storage period. Every 6 days tomatoes were evaluated for color modifications, fruit firmness, souble and total pectin (only for light-red tomatoes), mass loss, titratable acidity (TA), soluble solids (SS), SS/TA ratio, carotenoids profile, formation of lycopene isomers, total phenolic compounds, ascorbic acid and antioxidant capacity. For tomatoes harvested at breaker stage and submitted to the treatments the results showed mass loss was delaying mainly by carnauba wax, and to a lesser extend by 1-MCP. Fruit firmness were better retained for 1-MCP treated fruits and carnauba treatment showed a transient effect in preserving fruit firmness. SS/TA of tomatoes treated with gamma radiation and carnauba presented no differences from control values, and were lower with the application of 1-MCP. Color was negatively affected by 1-MCP and earlier changed (6th day) when gamma radiation was applied. In relation to bioactive compounds of tomatoes harvest at breaker stage, results indicated gamma radiation and 1-MCP decreased the final content of lycopene and produced more (Z)-isomers of lycopene. Gamma radiation also induced a decreased in ?-carotene and an increased in phenolic compounds by the end of storage period. 1-MCP treatment promoted a slow down increase in ascorbic acid content during storage. Antioxidant capacity of the hydrophilic fraction was not dramatically affected by treatments and the lipophilic fraction was lower, especially for 1-MCP fruits. In addition, contents of ?-carotene, lycopene, (Z)-isomers of lycopene, ascorbic acid and antioxidant capacity increased during the period of storage while contents of lutein and phenolic compounds tended to decrease. Regarding tomatoes harvest at light-red stage, the most effective treatments for delaying fruit firmness and mass loss was carnauba and 1-MCP, while gamma radiation was the treatment with higher mass loss and the less fruit firmness, which could be associated with the higher solubilization of pectins promoted by radiation treatment. Color (L* and Hue) was mainly affected by 1-MCP treatment which delayed color development, however, by the end of storage, the values were not different from the other treatments. SS/TA ratio was lower for fruits treated with 1-MCP and TA was not so dramatically affected by treatments. Furthermore, mini tomatoes harvested at light-red stage, demonstrated irradiation induced changes in the final content of lycopene, increasing it, and formed less (13Z)-lycopene, while 1-MCP and carnauba coating slow down the increase in lycopene and slown down the decrease of ascorbic acid and phenolic compounds. Antioxidant capacity of lipophilic fraction was not affected by treatments and the hydrophilic fraction was lower for irradiated fruits only on day 0 as well as phenolic compounds. In the other days, no differences among treatments were observed for hydrophilic antioxidant capacity. Considering the results, the best combination of SS and TA and fruit preservation for mini tomatoes harvest at breaker stage was promoted by carnauba coating, which seems to be the treatment that causes fewer changes in bioactive compounds of breaker tomatoes. However, when mini tomatoes were harvested at light-red stage, SS/TA ratio and color were better and, to preserve the quality of these fruits, besides carnauba coating, 1-MCP also could be indicated

Self-heating function of carbon nanofiber cement pastes

The viability of carbon nanofiber (CNF) composites in cement matrices as a self-heating material is reported in this paper. This functional application would allow the use of CNF cement composites as a heating element in buildings, or for deicing pavements of civil engineering transport infrastructures, such as highways or airport runways. Cement pastes with the addition of different CNF dosages (from 0 to 5% by cement mass) have been prepared. Afterwards, tests were run at different fixed voltages (50, 100 and 150V), and the temperature of the specimens was registered. Also the possibility of using a casting method like shotcrete, instead of just pouring the fresh mix into the mild (with no system’s efficiency loss expected) was studied. Temperatures up to 138 °C were registered during shotcrete-5% CNF cement paste tests (showing initial 10 °C/min heating rates). However a minimum voltage was required in order to achieve a proper system functioning.

Evaluating the Effectiveness of Post Fire Emergency Rehabilitation Treatments on Soil Degradation and Erosion Control in Semi-Arid Mediterranean Areas of the Spanish South East

In this study, we seeded a native plant species and applied a mulch of chopped wood originating from the same burned area to avoid the establishment of invasive species. We evaluated four treatments: (1) seeding, (2) mulch, (3) seeding and mulch, and (4) control. Our objective was to increase plant recovery and to minimize the soil erosion and degradation. The study was conducted in Alicante, Spain in Torremanzanas forest of the semi-arid Mediterranean bioclimatic area after the wildfire of November, 2002. During three years of monitoring, we find that combined treatment: seeding and mulch increased the post fire plant recovery 20% approximately more than the rest of treatments and the control plots. We also found that seven months after treating mulch and seeding and mulch treatments presented a gain of soil: +5.18 to + 5.24 mm while the seeding treatment and control plots presented soil loss rates of: −0.48 to −0.49 mm. In addition, mulch treatment significantly decreased soil compaction to the half, and increased the infiltration capacity to 40 ml.mn−1 more than in plots without mulch, as well as increased the soil respiration to the double compared with no mulch plots. Work in progress confirms the positive effect of chopped wood as mulching treatment with or without seeding on the soil protection against soil erosion, and the amelioration of bio-physical properties after wildfires in the Mediterranean semi-arid burned areas.

The effect of electricity tariffs over the operating costs of the Spanish wastewater treatments plants

Given the complex structure of electricity tariffs and their steady growth in Spanish, we've studied its effect over the operating costs of the wastewater treatment plants (WWTP), concluding that in the last three years the revisions of electricity rates have meant increases in electricity costs of 64.5% in the rate 3.1.A and 79.1% in the rate 6.1. This has caused the cost of electricity, which was the most important, has increased from a 44% of total operating costs in the year 2009, to more than a 56% in the year 2012.

Self-heating and deicing conductive cement. Experimental study and modeling

This research studies the self-heating produced by the application of an electric current to conductive cement pastes with carbonaceous materials. The main parameters studied were: type and percentage of carbonaceous materials, effect of moisture, electrical resistance, power consumption, maximum temperature reached and its evolution and ice melting kinetics are the main parameters studied. A mathematical model is also proposed, which predicts that the degree of heating is adjustable with the applied voltage. Finally, the results have been applied to ensure that cementitious materials studied are feasible to control ice layers in transportation infrastructures.