Avaliação do desempenho e características relacionadas ao grau de infecção por helmintos de bovinos da raça nelore

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Síntese, caracterização térmica e grau de conversão de polímeros dimetacrilatos com diferentes coiniciadores não tóxicos

The photopolimerization it is be widely used nowadays in different fields as materials, medicine and dentistry. To occur that synthesis is utilized dimethacrylates monomers and photoinitiators, the photoinitiator system more usual is camphorquinone/tertiary amine (ethyl-p-dimethylamino benzoate). However is knowledge that tertiary amines are toxics, so the aim of this work is replace toxic amine compounds to non-toxic compounds as glycerol and inositol. Therefore was used the FTIR technic to calculate the monomers conversion degree as well as Thermogravimetric Analysis-simultaneous differential thermal analysis (TG-DTA) and Differential Scanning Calorimetry (DSC) to evaluate thermal stability, combustion rate, degradation steps, oxidation and volatilization of all samples. The study shown no significant difference about thermal behavior of all polymers, the initiators system for efficient and more fastness was camphorquinone /tertiary amine system followed by ca mph o r quinone/glycerol system

Diagnósticos de enfermagem prevalentes em geriatria segundo o grau de dependência

This is a quantitative study conducted at the Outpatient Clinic of the Geriatrics and Gerontology Academic League of Botucatu School of Medicine. It aimed at learning about the profile of elderly patients and their level of disability in relation to basic activities of daily living. Based on this information, nursing diagnoses for the population under study were made, and the most frequent diagnosed were selected with the purpose of composing a stage of the instrument for nursing consultation in geriatric. It was found that the disabled elderly patients were predominantly females and widowed. They had a mean age of 81 years and had completed the first 4 grades of elementary school. Chronic pain related to physical disability and impaired ambulation related to the presence of osteoarticular diseases are examples of the most common diagnoses in the studied population. It is important that geriatric nurses implement Nursing Care Systematization based on the knowledge of the population to which they attend by considering the level of disability of elderly patients with respect to basic activities of daily living, so that full and individualized care can be provided and the patients’ remaining autonomy can be preserved.

Degradabilidade do amido de grãos secos e ensilados de híbridos de milho com textura dura e dentada em função do grau de moagem

This research evaluated corn grains with flint and dent texture (ensiled high-moisture or dried), submitted to grinding degrees, using the in situ ruminal degradation technique. Three rumen canulated adult sheeps were used in a complete randomized design, using a factorial outline 2 x 2 x 3, with two corn hybrids (flint and dent texture), two conservation methods (ensiled high-moisture and dry) and three grinding degress (whole, coarsely and finely ground, corresponding to the sieve of 12; 10 and 8 mm). Starch soluble fraction (A) of the dent hybrid ensiled corn grains was greater comparing to the dry materials and in both conservation forms this fraction was reduced in the flint texture hybrid, while the insoluble fraction potentially degradable (B) the opposite occurred. The degradation potential was higher in grains ensiled in two textures. The ensiled allowed more starch effective degradation in relation to dry grain in two textures and the grains dent texture hybrid also increased such degradation in both conservation methods. The dent texture and the ensiled high-moisture grains proved the best option considering the starch degradability. Regardless of the conservation forms, the grains of corn hybrid flint texture should be finely ground, for providing higher ruminal degradation, while for the dent texture hybrid, the coarsely and whole grinding are the most suitable for ensiled and dry grain, respectively.

Influência de aspectos técnicos e anatômicos nos índices de fertilidade baseado no desempenho da inseminação artificial

The aim of this work was to examine both the influence of anatomical and technical aspects on fertility rate of sheep based on the performance of transcervical artificial insemination (TCAI). Transcervical artificial insemination was performed with traction of the cervix in 122 ewes using frozen semen from 11 rams, both Santa Ines breed. The data collected were: type of external cervical opening (CO) (P - papilla; FL - flap; DB - duckbill, S - spiral; RO - rosette), duration of cervical manipulation (2-3, 4-5 and 6-7 minutes), degree of difficulty in cervical transposition (low, moderate, high) and presumed semen deposition site (SC - superficial cervical; DC - deep cervical; IU - intrauterine). The influence of these variables on pregnancy rate was evaluated. Cervical opening type and duration of cervical manipulation had no influence (p>0.05) on fertility. The degree of difficulty in cervical manipulation influenced (p<0.05) pregnancy rate, since insemination classified as low grade had 52% of pregnancy, while those classified as high recorded only 20%. The presumed site of semen deposition influenced significantly (p<0.05) fertility. Pregnancy rates of deposition at each site were: UI – 45.8%, DC – 25.7%; SC – 15.4%. As expected, deeper depositions resulted in higher fertility. In conclusion, the performance of TCAI did not depend on the anatomical classification of external cervical opening of ewe and the duration of cervical manipulation within the range tested (2-7 minutes). The TCAI may have higher fertility rates if difficulties in the application were reduced and the semen deposition was deeper.

Síndrome da apnéia obstrutiva do sono: diagnóstico e tratamento

The Syndrome Obstructive Sleep Apnea (OSA) is defined by recurrent episodes of a total or partial obstruction of the airway during sleep, considered apnea and hypopnea respectively. Considered to be increasing by increasing the number of individuals with a disorder breathing, Being continually increasing the number of individuals with a respiratory disorder, OSA can be considered a public health problem that deserves greater attention in relation to diagnoses and treatments that are being conducted. The objective of this study is through a literature review which should be evaluated during the diagnosis and etiology, consequences and treatment of respiratory disorders not adequately treated. The etiology is multifactorial and may be associated with exogenous factors or pathological and anatomical factors. In addition to the own symptoms interfere with the quality of life of the individual, depending on the intensity, OSA can trigger more serious complications. This is a complex syndrome which may have varying degrees and irreversible consequences to the body. The choice of treatment should be based on clinical conditions, the severity of the apnea, the degree of urgency of treatment and the patient's preferences, but the treatments available will not be fully effective if there are no changes in lifestyle of it. The respiratory disorders can range from a simple nasal obstruction and intermittent obstruction more severe, emphasizing the importance of a complete diagnosis, which must be multidisciplinary, through a team relationship between doctor and dentist.

Construção de gráficos de funções polinomiais de grau 3

Pós-graduação em Matemática em Rede Nacional - IBILCE

Estudo do grau de modernização e mecanização nas obras de construção civil: estudo de caso - cidade de Lorena

This paper had as emphasis the study of the mechanization and modernization of the construction job sites of the city of Lorena located in the Vale do Paraíba, São Paulo. From the literature review on this topic, it was possible to understand the main causes of the delay in the job sites relating to the new technology available. The research on the history of construction and equipment evolution, along with interviews with workers, engineers and architects, it was possible to analyze the current situation. One of the main intentions of this study was to propose guidelines for the modernization of the construction sites

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

Medida do grau de relacionamento entre estímulos equivalentes

Este estudo apresenta um procedimento para verificar a existência de "graus de relacionamento" diferentes entre estímulos equivalentes por meio de uma medida quantitativa de compartilhamento de funções. Dois grupos de estudantes universitários participaram do estudo. Os participantes do grupo experimental estabeleceram classes de equivalência entre figuras abstratas e fotografias de faces expressando alegria, raiva e nojo. Em seguida, avaliaram algumas das figuras abstratas usando um instrumento de diferencial semântico. O mesmo instrumento foi utilizado na avaliação das faces e figuras pelos participantes do grupo controle, não treinados a estabelecer relações entre esses estímulos. Esses últimos participantes avaliaram as figuras como neutras e as avaliações que fizeram das faces corresponderam às avaliações das figuras equivalentes a elas feitas pelos participantes do grupo experimental. A comparação entre os valores atribuídos às faces e às figuras dá uma medida quantitativa do grau de relacionamento entre esses estímulos e essa medida pode ser usada no estudo de parâmetros da formação de classes como o número de nódulos.

Estudo do grau de modernização e mecanização nas obras de construção civil: estudo de caso - cidade de Lorena

This paper had as emphasis the study of the mechanization and modernization of the construction job sites of the city of Lorena located in the Vale do Paraíba, São Paulo. From the literature review on this topic, it was possible to understand the main causes of the delay in the job sites relating to the new technology available. The research on the history of construction and equipment evolution, along with interviews with workers, engineers and architects, it was possible to analyze the current situation. One of the main intentions of this study was to propose guidelines for the modernization of the construction sites

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

Intervalo hídrico ótimo e grau de compactação de um latossolo vermelho após 30 anos sob plantio direto

A qualidade física do solo é um dos fatores determinantes da sustentabilidade agronômica, econômica e ambiental no sistema plantio direto (SPD). A compactação do solo tem sido apontada como um dos fatores de redução da qualidade física em solos sob SPD. Contudo, com a utilização do SPD, pode haver o incremento de matéria orgânica do solo e o desenvolvimento de um sistema poroso contínuo e estável, que atenuam os impactos negativos da compactação. O objetivo deste trabalho foi avaliar a qualidade física de um Latossolo Vermelho distroférrico sob SPD durante 30 anos, utilizando o intervalo hídrico ótimo (IHO) e o grau de compactação do solo (GC). Em uma área comercial com histórico de altas produtividades sob SPD, foram coletadas amostras de solo com estrutura preservada e deformada, para determinação da densidade do solo (Ds), do IHO e do GC. As amostras com estrutura preservada foram obtidas em três posições, relativas às linhas (L), entrelinhas (E) e posição intermediária entre as linhas e entrelinhas (PI) da cultura do milho. Foram determinadas as curvas de retenção de água e resistência do solo à penetração, bem como a Ds. A amostra de solo com estrutura deformada foi usada para obter a curva de compactação, utilizando o teste de Proctor. A Dmax foi obtida a partir da curva de compactação, e o GC foi determinado pela razão entre a Ds e a Dmax. Independentemente dos limites críticos de resistência à penetração (RP), verifica-se redução do IHO com o aumento da Ds. Os maiores valores do IHO foram verificados na posição de amostragem L, e a utilização de RP crítica maior que 2,0 MPa resultou em IHO condizente com a qualidade física desse solo sob SPD de longo tempo. A Dmax foi de 1,52 kg dm-3, e o GC variou de 64 a 87 %, sendo os maiores valores obtidos nas posições E e PI. Os valores de IHO e GC obtidos neste estudo indicam que a qualidade física desse solo não é limitante à produção das culturas após 30 anos de utilização do SPD.

Morfologia macro e microscópica das papilas linguais do quati (Nasua nasua)

O quati (Nasua nasua) é um animal que pertence à Família Procyonidae. Foram utilizados três animais ortotanasiados, de ambos os sexos, provenientes do Criatório Científico de Animais Silvestres, Centro Universitário Fundação de Ensino Octávio Bastos (Cecrimpas, Unifeob) autorizado pelo IBAMA (Proc.02027.003731/04-76). Para a análise macroscópica, as línguas foram retiradas, analisadas e foto-documentadas. Para análise microscópica, as línguas foram processadas rotineiramente pela técnica de microscopia eletrônica de varredura e inclusão em Paraplast; pela técnica de microscopia de luz os fragmentos foram cortados em micrótomo, com espessura média de 5mm e corados em HE e Picrosírius com fundo de hematoxilina. Os resultados macroscópicos e microscópicos mostram que a língua do quati apresenta papilas filiformes, fungiformes, valadas e cônicas sendo estas distribuídas nas regiões rostralis, medialis e caudalis. Histologicamente, a língua do quati é revestida por um epitélio pavimentoso estratificado queratinizado apresentando camada basal, espinhosa, granulosa e córnea com fibras de músculos estriados esqueléticos longitudinais e transversais e diversas glândulas. De acordo com os resultados pode-se concluir que a língua do quati possui características macroscópicas e microscópicas semelhantes aos canídeos, tendo como diferença o número de papilas valadas e o grau de queratinização.

Polyphyly of the hawk genera Leucopternis and Buteogallus (Aves, Accipitridae): multiple habitat shifts during the Neotropical buteonine diversification

Abstract Background The family Accipitridae (hawks, eagles and Old World vultures) represents a large radiation of predatory birds with an almost global distribution, although most species of this family occur in the Neotropics. Despite great morphological and ecological diversity, the evolutionary relationships in the family have been poorly explored at all taxonomic levels. Using sequences from four mitochondrial genes (12S, ATP8, ATP6, and ND6), we reconstructed the phylogeny of the Neotropical forest hawk genus Leucopternis and most of the allied genera of Neotropical buteonines. Our goals were to infer the evolutionary relationships among species of Leucopternis, estimate their relationships to other buteonine genera, evaluate the phylogenetic significance of the white and black plumage patterns common to most Leucopternis species, and assess general patterns of diversification of the group with respect to species' affiliations with Neotropical regions and habitats. Results Our molecular phylogeny for the genus Leucopternis and its allies disagrees sharply with traditional taxonomic arrangements for the group, and we present new hypotheses of relationships for a number of species. The mtDNA phylogenetic trees derived from analysis of the combined data posit a polyphyletic relationship among species of Leucopternis, Buteogallus and Buteo. Three highly supported clades containing Leucopternis species were recovered in our phylogenetic reconstructions. The first clade consisted of the sister pairs L. lacernulatus and Buteogallus meridionalis, and Buteogallus urubitinga and Harpyhaliaetus coronatus, in addition to L. schistaceus and L. plumbeus. The second clade included the sister pair Leucopternis albicollis and L. occidentalis as well as L. polionotus. The third lineage comprised the sister pair L. melanops and L. kuhli, in addition to L. semiplumbeus and Buteo buteo. According to our results, the white and black plumage patterns have evolved at least twice in the group. Furthermore, species found to the east and west of the Andes (cis-Andean and trans-Andean, respectively) are not reciprocally monophyletic, nor are forest and non-forest species. Conclusion The polyphyly of Leucopternis, Buteogallus and Buteo establishes a lack of concordance of current Accipitridae taxonomy with the mtDNA phylogeny for the group, and points to the need for further phylogenetic analysis at all taxonomic levels in the family as also suggested by other recent analyses. Habitat shifts, as well as cis- and trans-Andean disjunctions, took place more than once during buteonine diversification in the Neotropical region. Overemphasis of the black and white plumage patterns has led to questionable conclusions regarding the relationships of Leucopternis species, and suggests more generally that plumage characters should be used with considerable caution in the taxonomic evaluation of the Accipitridae.