Tomographic, Histological, and Immunohistochemical Evidences on the Use of N-Butyl-2-Cyanoacrilate for Onlay Graft Fixation in Rabbits

Background: The bone tissue responses to Cyanoacrylate have been described in the literature, but none used N-butyl-2-cyanoacrilate (NB-Cn) for bone graft fixation. Purpose: The aims of the study were: (a) to analyze the bone grafts volume maintenance fixed either with NB-Cn or titanium screw; (b) to assess the incorporation of onlay grafts on perforated recipient bed; and (c) the differences of expression level of tartrate-resistant acid phosphatase (TRAP) protein involved in bone resorption. Materials and Methods: Eighteen New Zealand White rabbits were submitted to calvaria onlay grafting on both sides of the mandible. On one side, the graft was fixed with NB-Cn, while on the other hand the bone graft was secured with an osteosynthesis screw. The computed tomography (CT) was performed just after surgery and at animals sacrifice, after 1 (n = 9) and 6 weeks (n = 9), in order to estimate the bone grafts volume along the experiments. Histological sections of the grafted areas were prepared to evaluate the healing of bone grafts and to assess the expression of TRAP protein. Results: The CT scan showed better volume maintenance of bone grafts fixed with NB-Cn (p = 0.05) compared with those fixed with screws, in both experimental times (analysis of variance). The immunohistochemical evaluation showed that the TRAP expression in a 6-week period was significantly higher compared with the 1-week period, without showing significant difference between the groups (Wilcoxon and MannWhitney). Histological analysis revealed that the NB-Cn caused periosteum damage, but provided bone graft stabilization and incorporation similar to the control group. Conclusion: The perforation provided by screw insertion into the graft during fixation may have triggered early revascularization and remodeling to render increased volume loss compared with the experimental group. These results indicate that the NB-Cn possesses equivalent properties to titanium screw to be used as bone fixation material in osteosynthesis.

Alveolar recruitment maneuver in refractory hypoxemia and lobar atelectasis after cardiac surgery: A case report

Abstract Objective This case report describes an unusual presentation of right upper lobe atelectasis associated with refractory hypoxemia to conventional alveolar recruitment maneuvers in a patient soon after coronary artery bypass grafting surgery. Method Results The alveolar recruitment with PEEP = 40cmH2O improved the patient’s atelectasis and hypoxemia. Conclusion In the present report, the unusual alveolar recruitment maneuver with PEEP 40cmH2O showed to be safe and efficient to reverse refractory hypoxemia and uncommon atelectasis in a patient after cardiac surgery.

Influência da posição do dreno pleural na função pulmonar de pacientes submetidos à revascularização do miocárdio

JUSTIFICATIVA E OBJETIVOS: Estudo longitudinal, prospectivo, aleatório e encoberto para avaliar a influência do local de inserção do dreno pleural, de PVC atóxico, na função pulmonar e na dor pós-operatória dos pacientes submetidos à revascularização do miocárdio nos três primeiros dias pós-cirúrgicos e logo após a retirada do dreno. PACIENTES E MÉTODOS: Trinta e seis pacientes escalados para cirurgia eletiva de revascularização do miocárdio, com uso de circulação extracorpórea (CEC), em dois grupos: grupo SX (dreno subxifoide) e grupo IC (dreno intercostal). Feitos registros espirométricos, da gasometria arterial e da dor. RESULTADOS: Trinta e um pacientes analisados, 16 no grupo SX e 15 no grupo IC. O grupo SX apresentou valores espirométricos maiores do que o grupo IC (p < 0,05) no pós-operatório (PO), denotando menor influência do local do dreno na respiração. A PaO2 arterial no segundo PO aumentou significantemente no grupo SX quando comparada com o grupo IC (p < 0,0188). A intensidade da dor no grupo SX, antes e após a espirometria, era menor do que no grupo IC (p < 0,005). Houve aumento significativo dos valores espirométricos em ambos os grupos após a retirada do dreno pleural. CONCLUSÃO: A inserção do dreno na região subxifoide altera menos a função pulmonar, provoca menos desconforto e possibilita uma melhor recuperação dos parâmetros respiratórios.

Intervenção Coronariana Percutânea prévia como fator de risco para Revascularização Miocárdica

FUNDAMENTO: A Intervenção Coronariana Percutânea (ICP) vem aumentando na doença arterial coronariana crônica. Consequentemente, cada vez mais pacientes submetidos a Cirurgia de Revascularização Miocárdica (CRM) apresentam stent coronariano. OBJETIVO: Avaliar a influência do antecedente de stent coronariano na mortalidade hospitalar após CRM. MÉTODOS: Análise prospectiva com 1.099 pacientes consecutivos submetidos a CRM com circulação extracorpórea, entre maio/2007 e junho/2009. Pacientes sem ICP prévia (n = 938; 85,3%) foram comparados com pacientes com ICP prévia (n = 161; 14,6%), utilizando modelos de regressão logística e análise de pareamento de amostras. RESULTADOS: Ambos os grupos apresentavam semelhança em relação aos fatores de risco, exceto pela maior presença de pacientes com angina instável no grupo com ICP prévia (16,1% vs. 9,9%; p = 0,019). A mortalidade hospitalar após CRM foi maior entre os pacientes com ICP prévia (9,3% vs. 5,1%, p = 0,034), e foi semelhante à esperada em relação ao EuroSCORE e ao 2000 Bernstein-Parsonnet score. Na análise com regressão logística multivariada a ICP prévia emergiu como fator de risco independente para mortalidade hospitalar pós-operatória (odds ratio 1,94; IC 95% 1,02-3,68; p = 0,044) tão forte quanto diabetes (odds ratio 1,86; IC 95% 1,07-3,24; p = 0,028). Após o pareamento dos grupos, a mortalidade hospitalar continuou sendo maior entre os pacientes com ICP prévia, com odds ratio 3,46 ; IC 95% 1,10-10,93; p = 0,034. CONCLUSÃO: A ICP prévia em pacientes com doença coronariana multiarterial é fator de risco independente para mortalidade hospitalar após CRM. Tal fato deve ser considerado quando a ICP for indicada como alternativa inicial em pacientes com doença arterial coronariana mais avançada. (Arq Bras Cardiol. 2012; [online].ahead print, PP.0-0)

Avaliação de fita fotodegradável para enxertia em mudas de citros

O trabalho avaliou os efeitos do uso de fita fotodegradável de enxertia em mudas de laranjeira 'Valência' enxertadas em limoeiro 'Cravo' e citrumeleiro 'Swingle', em viveiro telado, em Bebedouro-SP, durante os meses de setembro a novembro de 2009. Para cada porta-enxerto, foram avaliados três tratamentos, que incluíram o uso da fita convencional de polietileno para a fixação da borbulha e a fita fotodegradável, por sua vez aplicada sob duas formas: com e sem envolvimento completo da gema. As variáveis avaliadas foram: tempo consumido na operação de amarrio da fita, porcentagem de borbulhas brotadas, comprimento e diâmetro do enxerto e porcentagem de mudas prontas para comercialização. O delineamento experimental adotado foi o de blocos ao acaso, com seis tratamentos e quatro repetições. Cada parcela foi representada por 12 plantas. Os tratamentos com a fita fotodegradável, com e sem envolvimento da gema, anteciparam a brotação do enxerto, apesar de o tempo gasto no amarrio da fita ser significativamente maior em relação ao método convencional. Quando o porta-enxerto utilizado é o citrumeleiro Swingle, menos vigoroso, recomenda-se manter a gema descoberta para evitar redução acentuada da brotação do enxerto.

Cirurgia de revascularização miocárdica na fase aguda do infarto: análise dos fatores preditores de mortalidade intra-hospitalar

OBJETIVO: A cirurgia de revascularização miocárdica (CRM) na fase aguda do infarto do miocárdio (IAM) está associada a aumento do risco operatório. O objetivo do estudo foi determinar fatores preditores de mortalidade intra-hospitalar nos pacientes submetidos a CRM no IAM. MÉTODOS: Durante três anos, todos os pacientes submetidos a CRM no IAM foram analisados retrospectivamente, utilizando o banco de dados institucional. Sessenta variáveis por paciente foram avaliadas: 49 variáveis pré-operatórias provenientes dos escores 2000 Bernstein-Parsonnet e EuroSCORE; 4 variáveis pré-operatórias não consideradas por esses escores (tempo entre o IAM e a CRM, valor máximo de CKMB, valor máximo de troponina e supradesnivelamento do segmento ST) e 7 variáveis intraoperatórias [uso de circulação extracorpórea (CEC), tempo de CEC, tipo de cardioplegia, endarterectomia, número de enxertos, uso da artéria torácica interna e revascularização completa]. Análise univariada e multivariada para o desfecho mortalidade intra-hospitalar foram realizadas. RESULTADOS: O tempo médio entre o IAM e a CRM foi de 3,8 ± 3 dias. A mortalidade global foi 19%. Na análise multivariada: idade > 65 anos [OR 16,5 (IC 1,8-152), P=0,013]~ CEC >108 minutos [OR 40 (IC 2,7-578), P=0,007], creatinina > 2 mg/dl [OR 35,5 (IC 1,7-740), P=0,021] e pressão pulmonar sistólica > 60 mmHg [OR 31(IC 1,6-591), P=0,022] foram preditores de mortalidade intra-hospitalar. CONCLUSÃO: Variáveis pré-operatórias clássicas como idade > 65 anos, creatinina > 2 mg/dl e pressão pulmonar sistólica > 60 mmHg foram preditoras de mortalidade intra-hospitalar nos pacientes operados de revascularização miocárdica na fase aguda do infarto.

A new method to evaluate glenoid erosion in instable shoulder

Background: We aimed to establish values and parameters using multislice reconstruction in axial computerized tomography (CT) in order to quantify the erosion of the glenoid cavity in cases of shoulder instability. Methods: We studied two groups using CT. Group I had normal subjects and Group II had patients with shoulder instability. We measured values of the vertical segment, the superior horizontal, medial and inferior segments, and also calculated the ratio of the horizontal superior and inferior segments of the glenoid cavity in both normal subjects and those with shoulder instability. These variables were recorded during arthroscopy for cases with shoulder instability. Results The mean values were 40.87 mm, 17.86 mm, 26.50 mm, 22.86 mm and 0.79 for vertical segment, the superior horizontal, medial and inferior segments, and the ratio between horizontal superior and inferior segments of the glenoid cavity respectively, in normal subjects. For subjects with unstable shoulders the mean values were 37.33 mm, 20.83 mm, 23.07 mm and 0.91 respectively. Arthroscopic measurements yielded an inferior segment value of 24.48 mm with a loss of 2.39 mm (17.57%). The ratio between the superior and inferior segments of the glenoid cavity was 0.79. This value can be used as a normative value for evaluating degree of erosion of the anterior border of the glenoid cavity. However, values found using CT should not be used on a comparative basis with values found during arthroscopy. Conclusions: Computerized tomographic measurements of the glenoid cavity yielded reliable values consistent with those in the literature.

Stem Cells as a therapy for myocardial infarction in animal models

Advances in stem cell biology have challenged the notion that infarcted myocardium is irreparable. The pluripotent ability of stem cells to differentiate into specialized cell lines began to garner intense interest within cardiology when it was shown in animal models that intramyocardial injection of bone marrow stem cells (MSCs), or the mobilization of bone marrow stem cells with spontaneous homing to myocardium, could improve cardiac function and survival after induced myocardial infarction (MI) [1, 2]. Furthermore, the existence of stem cells in myocardium has been identified in animal heart [3, 4], and intense research is under way in an attempt to clarify their potential clinical application for patients with myocardial infarction. To date, in order to identify the best one, different kinds of stem cells have been studied; these have been derived from embryo or adult tissues (i.e. bone marrow, heart, peripheral blood etc.). Currently, three different biologic therapies for cardiovascular diseases are under investigation: cell therapy, gene therapy and the more recent “tissue-engineering” therapy . During my Ph.D. course, first I focalised my study on the isolation and characterization of Cardiac Stem Cells (CSCs) in wild-type and transgenic mice and for this purpose I attended, for more than one year, the Cardiovascular Research Institute of the New York Medical College, in Valhalla (NY, USA) under the direction of Doctor Piero Anversa. During this period I learnt different Immunohistochemical and Biomolecular techniques, useful for investigating the regenerative potential of stem cells. Then, during the next two years, I studied the new approach of cardiac regenerative medicine based on “tissue-engineering” in order to investigate a new strategy to regenerate the infracted myocardium. Tissue-engineering is a promising approach that makes possible the creation of new functional tissue to replace lost or failing tissue. This new discipline combines isolated functioning cells and biodegradable 3-dimensional (3D) polymeric scaffolds. The scaffold temporarily provides the biomechanical support for the cells until they produce their own extracellular matrix. Because tissue-engineering constructs contain living cells, they may have the potential for growth and cellular self-repair and remodeling. In the present study, I examined whether the tissue-engineering strategy within hyaluron-based scaffolds would result in the formation of alternative cardiac tissue that could replace the scar and improve cardiac function after MI in syngeneic heterotopic rat hearts. Rat hearts were explanted, subjected to left coronary descending artery occlusion, and then grafted into the abdomen (aorta-aorta anastomosis) of receiving syngeneic rat. After 2 weeks, a pouch of 3 mm2 was made in the thickness of the ventricular wall at the level of the post-infarction scar. The hyaluronic scaffold, previously engineered for 3 weeks with rat MSCs, was introduced into the pouch and the myocardial edges sutured with few stitches. Two weeks later we evaluated the cardiac function by M-Mode echocardiography and the myocardial morphology by microscope analysis. We chose bone marrow-derived mensenchymal stem cells (MSCs) because they have shown great signaling and regenerative properties when delivered to heart tissue following a myocardial infarction (MI). However, while the object of cell transplantation is to improve ventricular function, cardiac cell transplantation has had limited success because of poor graft viability and low cell retention, that’s why we decided to combine MSCs with a biopolimeric scaffold. At the end of the experiments we observed that the hyaluronan fibres had not been substantially degraded 2 weeks after heart-transplantation. Most MSCs had migrated to the surrounding infarcted area where they were especially found close to small-sized vessels. Scar tissue was moderated in the engrafted region and the thickness of the corresponding ventricular wall was comparable to that of the non-infarcted remote area. Also, the left ventricular shortening fraction, evaluated by M-Mode echocardiography, was found a little bit increased when compared to that measured just before construct transplantation. Therefore, this study suggests that post-infarction myocardial remodelling can be favourably affected by the grafting of MSCs delivered through a hyaluron-based scaffold

Low-dimensional carbon allotropes: an electron microscopy investigation

The research reported in this manuscript concerns the structural characterization of graphene membranes and single-walled carbon nanotubes (SWCNTs). The experimental investigation was performed using a wide range of transmission electron microscopy (TEM) techniques, from conventional imaging and diffraction, to advanced interferometric methods, like electron holography and Geometric Phase Analysis (GPA), using a low-voltage optical set-up, to reduce radiation damage in the samples. Electron holography was used to successfully measure the mean electrostatic potential of an isolated SWCNT and that of a mono-atomically thin graphene crystal. The high accuracy achieved in the phase determination, made it possible to measure, for the first time, the valence-charge redistribution induced by the lattice curvature in an individual SWCNT. A novel methodology for the 3D reconstruction of the waviness of a 2D crystal membrane has been developed. Unlike other available TEM reconstruction techniques, like tomography, this new one requires processing of just a single HREM micrograph. The modulations of the inter-planar distances in the HREM image are measured using Geometric Phase Analysis, and used to recover the waviness of the crystal. The method was applied to the case of a folded FGC, and a height variation of 0.8 nm of the surface was successfully determined with nanometric lateral resolution. The adhesion of SWCNTs to the surface of graphene was studied, mixing shortened SWCNTs of different chiralities and FGC membranes. The spontaneous atomic match of the two lattices was directly imaged using HREM, and we found that graphene membranes act as tangential nano-sieves, preferentially grafting achiral tubes to their surface.

Liquid crystal polymers: macromolecular design for enhanced performances

During this work, done mainly in the laboratories of the department of Industrial Chemistry and Materials of the University of Bologna but also in the laboratories of the Carnegie Mellon University in collaboration with prof. K. Matyjaszewski and at the university of Zaragoza in collaboration with prof. J. Barberá, was focused mainly on the synthesis and characterization of new functional polymeric materials. In the past years our group gained a deep knowledge about the photomodulation of azobenzene containing polymers. The aim of this thesis is to push forward the performances of these materials by the synthesis of well defined materials, in which, by a precise control over the macromolecular structures, better or even new functionality can be delivered to the synthesized material. For this purpose, besides the rich photochemistry of azoaromatic polymers that brings to the application, the control offered from the recent techniques of controlled radical polymerization, ATRP over all, gives an enormous range of opportunity for the developing of a new generation of functional materials whose properties are determinate not only by the chemical nature of the functional center (e.g. azoaromatic chromophore) but are tuned and even amplified by a synergy with the whole macromolecular structure. Old materials in new structures. In this contest the work of this thesis was focused mainly on the synthesis and characterization of well defined azoaromatic polymers in order to establish, for the first time, precise structure-properties correlation. In fact a series of well defined different azopolymers, chiral and achiral, with different molecular weight and highly monodisperse were synthesized and their properties were studied, in terms of photoexpansion and photomodulation of chirality. We were then able to study the influence of the macromolecular structure in terms of molecular weight and ramification on the studied properties. The huge amount of possibility offered by the tailoring of the macromolecular structure were exploited for the synthesis of new cholesteric photochromic polymers that can be used as a smart label for the certification of the thermal history of any thermosensitive product. Finally the ATRP synthesis allowed us to synthesize a total new class of material, named molecular brushes: a flat surface covered with an ultra thin layer of polymeric chain covalently bond onto the surface from one end. This new class of materials is of extreme interest as they offer the possibility to tune and manage the interaction of the surface with the environment. In this contest we synthesized both azoaromatic surfaces, growing directly the polymer from the surface, and mixed brushes: surfaces covered with incompatible macromolecules. Both type of surfaces acts as “smart” surfaces: the first it is able to move the orientation of a LC cell by simply photomodulation and, thanks to the robustness of the covalent bond, can be used as a command surface overcoming all the limitation due to the dewetting of the active layer. The second type of surface, functionalized by a grafting-to method, can self assemble the topmost layer responding to changed environmental conditions, exposing different functionality according to different environment.

Role of reactive oxygen and nitrogen species in the response of Prunus spp. to bicarbonate

In calcareous soils, which are a large share of agricultural soils worldwide, iron availability is limited. Consequently, the whole plant physiology is affected, because of the key role of iron in redox metabolism, resulting in reduced crop yield and quality. Peach cultivation is economically important in northern Italy, and is easily subjected to iron chlorosis. The management of iron nutrition in peach includes grafting on bicarbonate-tolerant rootstocks; other forms of management may be expensive and environmentally impacting. Four genotypes, used as rootstocks for peach and characterized by different degrees of tolerance to chlorosis, were tested in vitro on optimal and bicarbonate-enriched medium. Their redox status and antioxidant responses were assayed; the production and possible roles of nitric oxide (NO) and related compounds were also studied. The most sensitive genotypes show a stronger reduction of the antioxidant enzymatic activities and an increased oxidative stress. A high production of NO was found to be associated to resistant genotypes, whereas sensitive genotypes reacted to stress by downregulating nitrosoglutathione reductase activity. Therefore, NO is proposed to improve the internal iron availability, or to stimulate iron intake.

Mitglieder der Immunglobulin-Superfamilie aus dem marinen Schwamm Geodia cydonium

Der evolutionär älteste Tierstamm der Metazoa, die Schwämme (Porifera), bietet sich als Modellorganismus zur Untersuchung der Selbst/Fremd-Erkennung an. Diese Unterscheidung wurde bei der Evolution von einzelligen zu mehrzelligen Tieren wichtig. Schwämme besitzen ein angeborenes Immunsystem. Ob sie auch Vorläufer der Immunrezeptoren aufweisen, sollte in dieser Arbeit untersucht werden. Einen ersten Schritt stellte die Identifizierung weiterer Gene mit Immunglobulin-ähnlichen Domänen dar. Mit der Isolierung der beiden 'Schwamm-Adhäsionsmoleküle' GCSAML und GCSAMS durch ein Homologiescreening ist dies gelungen. Die Beteiligung dieser Moleküle an einer Immunantwort wurde mit Hilfe von Transplantationsexperimenten untersucht. Die Gewebe von Autotransplantaten fusionierten, während es bei Allotransplantaten zu einer Abstoßung des eingesetzten Gewebes kam. Durch Immunfluoreszenz-Untersuchungen sowohl an Geodia cydonium- als auch an Suberites domuncula-Zellen konnte gezeigt werden, daß Moleküle mit Immunglobulin-ähnlichen Domänen an den Transplantationsprozessen beteiligt sind. Northern Blot-Analysen zeigten die Beteiligung speziell von GCSAML an der Autotransplantation. Western Blot-Analysen bestätigten diese Ergebnisse und weiteten sie auf Allotransplantationen aus. Beide GCSAM-Gene können der Immunglobulin-Superfamilie zugeordnet werden. GCSAML kann durch die Existenz des sogenannten ITIM-Motives weiter in die spezielle Klasse der inhibitorischen Rezeptoren gruppiert werden und stellt damit einen Vorläufer der Immunrezeptoren dar.

Liquid crystal polymer brushes and their application as alignment layers in liquid crystal cells

Liquid Crystal Polymer Brushes and their Application as Alignment Layers in Liquid Crystal Cells Polymer brushes with liquid crystalline (LC) side chains were synthesized on planar glass substrates and their nematic textures were investigated. The LC polymers consist of an acrylate or a methacrylate main chain and a phenyl benzoate group as the mesogenic unit which is connected to the main chain via a flexible alkyl spacer composed of six CH2 units. The preparation of the LC polymer brushes was carried out according to the “grafting from” technique: polymerization is carried out from azo-initiators that have been previously self-assembled on the substrate. LC polymer brushes with a thickness from a few nm to 230 nm were synthesized by varying the monomer concentration and the polymerization time. The LC polymer brushes were thick enough to allow for direct observation of the nematic textures with a polarizing microscope. The LC polymer brushes grown on untreated glass substrates exhibited irregular textures (“polydomains”). The domain size is in the range of some micrometers and depends only weakly on the brush thickness. The investigations on the texture-temperature relationship of the LC brushes revealed that the brushes exhibit a surface memory effect, that is, the identical texture reappears after the LC brush sample has experienced a thermal isotropization or a solvent treatment, at which the nematic LC state has been completely destroyed. The surface memory effect is attributed to a strong anchoring of the orientation of the mesogenic units to heterogeneities at the substrate surface. The exact nature of the surface heterogeneities is unknown. The effect was observed for the LC brushes swollen with low molecular weight nematic molecules, as well. Rubbing the glass substrate with a piece of velvet cloth prior to the surface modification with the initiator and the brush growth gives rise to the formation of homogenous alignment of the mesogenic units in the LC polymer side chains. Monodomain textures were obtained for these LC brushes. The mechanism for the homogeneous alignment is based on the transfer of Nylon fibers during the rubbing process. A surfactant was mixed with the azo-initiator in modifying rubbed substrates for subsequent brush generation. Such brushes exhibited biaxial optical properties. Hybrid LC cells made from a substrate modified with biaxial brushes and a rubbed glass substrate show an orientation with a tilt angle of a = –15.6 . This work shows that LC brushes grown on rubbed surfaces fulfill the important criteria for alignment layers: the formation of macroscopic monodomains. First results indicate that by diluting the brush with molecules which are also covalently bound to the surface but induce a different orientation, a system is obtained in which the two conflicting alignment mechanisms can be used to generate a tilted alignment. In order to allow for an application of the alignment layers into a potential product, subsequent work should focus on the questions how easy and in which range the tilt angle can be controlled.

Sphärische Bürsten in polymeren Schmelzen

Colloidal nanoparticles are additives to improve or modify several properties of thermoplastic or elastic polymers. Usually colloid-polymer mixtures show phase separation due to the depletion effect. The strategy to overcome this depletion demixing was to prepare surface-modified colloidal particles, which can be blended with linear polymer chains homogeneous. A successful synthesis strategy for the preparation of hairy nanospheres was developed by grafting polystyrene macromonomer chains onto polyorganosiloxane microgels. The number of hairs per particle with a core radius of approximately 10nm exceeded 150 hairs in all cases. The molecular weight of the hairs variied between 4000-18000g/mol.The compatibility of these hairy spheres mixed with linear polymer chains was investigated by AFM, TEM and SAXS. Homogeneous mixtures were found if the molecular weight of the polymer hairs on the particle surface is at least as large as the molecular weight of the matrix chains. If the chains are much shorter than the hairs, the colloidal hair corona is strongly swollen by the matrix polymer, leading to a long-range soft interparticle repulsion ('wet brush'). If hairs and chains are comparable in length, the corona shows much less volume swelling, leading to a short-range repulsive potential similar to hard sphere systems ('dry brush'). Polymerketten und Kolloidpartikel entmischen aufgrund von Depletion-Wechselwirkungen. Diese entropisch bedingte Entmischung konnte durch das Ankoppeln von Polymerhaaren verschiedenen Molekulargewichts auf die Kugeloberflächen der Kolloide bis zu hohen Konzentrationen vermieden werden. Zur Darstellung sphärischer Bürsten und haariger Tracerpartikel wurde eine neue Synthesestrategie ausgearbeitet und erfolgreich umgesetzt.Das Kompatibilitätsverhalten dieser sphärischen Bürsten in der Schmelze von Polymerketten als Matrix wurde mittels Elektronenmikroskopie und Kleinwinkelröntgenstreuung untersucht. Die Mischungen setzten sich aus sphärischen Bürsten und Matrixketten mit unterschiedlichen Molekulargewichten zusammen.Es zeigte sich, daß die Mischbarkeit entschieden durch das Verhältnis von Haarlänge zu Länge der Matrixketten beeinflußt wird.Aus den Untersuchungen des Relaxationsverhaltens mittels Rheologie und SAXS ergibt sich, daß das Konzept der 'dry brush'- und 'wet brush'-Systeme auf diese Mischungen übertragbar ist. Die Volumenquellung der Haarcorona durch die Matrixketten ist, wie die Experimente gezeigt haben, bereits im Fall von Polymeren mit relativ niedrigen Molekulargewichten zu beobachten. Sie ist umso stärker ausgeprägt, je größer das Längenverhältnis zwischen Polymerhaaren und Matrixketten ist. Die Quellung bedeutet eine Vergrößerung des effektiven Radius der Partikel und entspricht somit einer Erhöhung des effektiven Volumenbruchs. Dies führt zur Ausbildung einer höheren Ordnung und zu einem Einfrieren der Relaxation dieser strukturellen Ordnung führt.

Derivati polimerici organometallici ancorati su matrice inorganica per applicazioni in chimica fine

Organotin compounds have found in the last few decades a wide variety of applications. Indeed, they are used successfully as antifouling paints, PVC stabilizers and ion carriers, as well as homogeneous catalysts. In this context, it has been proved that the Lewis acidity of the metal centre allows these compounds to promote the reaction between alcohol and ester. However their use is now limited by their well-known toxicity, moreover they are hardly removable from the reaction mixture. This problem can be overcome by grafting the organotin derivative onto a polymeric cross-linked support. In this way the obtained heterogeneous catalyst can be easily filtered off from the reaction mixture, thus creating the so-called "clean organotin reagents", avoiding the presence of toxic organotin residues in solution and the tin release in the environment. In the last few years several insoluble polystyrene resins containing triorganotin carboxylate moieties have been synthesized with the aim of improving their catalytic activity: in particular we have investigated and opportunely modified their chemical structure in order to optimize the accessibility to the metal centre and its Lewis acidity. Recently, we replaced the polymeric matrix with an inorganic one, in order to dispose of a relatively cheaper and easily available support. For this purpose an ordered mesoporous silica, characterized by 2D-hexagonal pores, named MCM-41, and an amorphous silica have been selected. In the present work two kinds of MCM-41 silica containing the triorganotin carboxylate moiety have been synthesized starting from a commercial Cab-O-Sil M5 silica. These catalysts have two different spacers between the core and the tin-carboxylate moiety, namely a polyaliphatic chain (compound FT29) or a poliethereal one (compound FT6), with the aim to improve the interaction between catalyst and reacting ester. Three catalysts supported onto an amorphous silica have been also synthesized: the structure is the same as silica FT29, i.e. a compound having a polialiphatic chain, and they have different percentage of organotin derivative grafted on the silica surface (10, 30, 50% respectively for silica MB9, SU27 and SU28). The performances of the above silica as heterogeneous catalysts in transesterification reactions have been tested in a model reaction between ethyl acetate and 1-octanol, a primary alcohol sensitive to the reaction conditions. The alcohol conversion was assessed by gas-chromatography, determining the relative amount of transesterified product and starting alcohol after established time intervals.