Steroid metabolism in cultured mammalian astrocytes

This thesis explores the metabolism of the steroid progesterone within both rat and mouse brain cells in culture. The research identified a steroid 21-hydroxylase within the rat culture system, that has downstream implications on stress and behaviour. Novel uses for a stain to accurately discriminate two brain celltypes were discovered.

House for Heraclitus

Notions of Australian identity are still being constructed. In landscape painting, problematic differences of possession, ownership, spirituality and ethnicity are frequently highlighted against perceptions of what landscape looks like and how we might begin to imagine our relationships to where we live. This thesis has explored strategies employed in landscape construction. It has involved establishing connections between landscape painting and alternate disciplines that investigate landscape values, many of which aspire to the successful habitation of our environments into the future.

Nature of crystalline particle assembly in ring shaped colloidal stains from concentrated dispersions

The drying of colloidal droplet suspensions is important in many realms of practical application and has sustained the interest of researchers over two decades. The arrangements of polystyrene and silica beads, both of diameter 1 μm, 10% by volume of solid deposited on normal glass (hydrophilic), and silicone (hydrophobic) surfaces evaporated from a suspension volume of 3 μL, were investigated. Doughnut shape depositions were found, imputing the influence of strong central circulation flows that resulted in three general regions. In the central region which had strong particle build-up, the top most layers of particle arrangement was confirmed to be disordered using power spectrum and radial distribution function analysis. On closer examination, this appeared more like frustrated attempts to crystallize into larger grains rather than beads arranging in a disordered fashion throughout the piling process. With an adapted micro-bulldozing operation to progressively remove layers of particles from the heap, we found that the later efforts to crystallize through lateral capillary inter-particle forces were liable to be undone once the particles contacted the disorganized particles underneath, which were formed out of the jamming of fast particles arriving at the surface. © 2014 Elsevier B.V.

DNA transfer by examination tools--a risk for forensic casework?

The introduction of profiling systems with increased sensitivity has led to a concurrent increase in the risk of detecting contaminating DNA in forensic casework. To evaluate the contamination risk of tools used during exhibit examination we have assessed the occurrence and level of DNA transferred between mock casework exhibits, comprised of cotton or glass substrates, and high-risk vectors (scissors, forceps, and gloves). The subsequent impact of such transfer in the profiling of a target sample was also investigated. Dried blood or touch DNA, deposited on the primary substrate, was transferred via the vector to the secondary substrate, which was either DNA-free or contained a target sample (dried blood or touch DNA). Pairwise combinations of both heavy and light contact were applied by each vector in order to simulate various levels of contamination. The transfer of dried blood to DNA-free cotton was observed for all vectors and transfer scenarios, with transfer substantially lower when glass was the substrate. Overall touch DNA transferred less efficiently, with significantly lower transfer rates than blood when transferred to DNA-free cotton; the greatest transfer of touch DNA occurred between cotton and glass substrates. In the presence of a target sample, the detectability of transferred DNA decreased due to the presence of background DNA. Transfer had no impact on the detectability of the target profile, however, in casework scenarios where the suspect profiles are not known, profile interpretation becomes complicated by the addition of contaminating alleles and the probative value of the evidence may be affected. The results of this study reiterate the need for examiners to adhere to stringent laboratory cleaning protocols, particularly in the interest of contamination minimisation, and to reduce the handling of items to prevent intra-item transfer.

“Eu sou uma pessoa de tremendo sucesso”: representações, identidades e trajetórias de mulheres executivas no Brasil

Apesar de ainda ser pequeno o grupo de mulheres que conseguiu romper o “teto de vidro” e ascender a cargos executivos, a participação feminina em cargos de chefia, nos últimos anos, vem crescendo significativamente no Brasil. Como é um fenômeno relativamente recente, no campo acadêmico tal reflexo ainda não é expressivo e a ausência de uma maior produção sobre o tema dificulta uma compreensão mais ampla sobre as peculiaridades presentes na trajetória dessas mulheres. Diante deste contexto, esta tese tem como principal objetivo refletir sobre as representações que circulam a respeito dessa “nova” mulher trabalhadora e os elementos que compõem a construção de identidades para este grupo. A partir da análise de 52 números da revista Vida Executiva/Mulher Executiva e de 10 entrevistas, baseadas na metodologia de história oral, com mulheres que atuam no mercado de trabalho brasileiro em cargos executivos, busca-se investigar as dificuldades existentes e as estratégias estabelecidas para romper esse “teto de vidro” e construir uma carreira considerada bem sucedida. Para atender a tal propósito, investiga-se a construção de um ethos que facilitou essa ascensão, as formas encontradas de conciliação de uma carreira executiva com a vida pessoal e a família e, as concepções que circulam sobre sucesso, trabalho, carreira, maternidade e arranjos familiares para essas mulheres.

Gerentes de projeto : um estudo sobre a relação entre perfis psicodemográficos, desempenho e progressão profissional

Dada a crescente estruturação das organizações permanentes em organizações temporárias, aqui representadas como projetos, há uma demanda proporcional por profissionais qualificados que atuem como os maestros dessas empreitadas – os gerentes de projetos (GP’s). Esta pesquisa de dissertação de mestrado tem por objetivo estudar como diferentes traços psicodemográficos, à saber: gênero, etnia, orientação sexual e aparência física, impactam na vida e na progressão profissional do GP que os detenha, pela perspectiva deste profissional. Na busca por possíveis respostas para essa questão, percorremos a teoria procurando os subsídios necessários ao GP para exercer satisfatoriamente sua atividade e ascender na carreira. Vimos que as hard skills desses profissionais são desenhadas e enriquecidas por meio das metodologias e boas práticas trazidas pelas diversas associações internacionais de gestão de projetos. Todavia, as ações prescritivas dessas metodologias apenas delineiam os contornos mais amplos das soft skills. Este conjunto de habilidades se mostrou fundamental para o GP em seu trabalho, sendo empiricamente apreendido e enriquecido pela experiência prática. Ademais, a progressão na carreira de GP é percebida frente à crescente complexidade dos projetos à ele subordinados, como também é percebida ao enveredar por caminhos mais estratégicos e menos operacionais. Calçamos a pesquisa sobre a cultura brasileira, usada como arcabouço para entender como tais profissionais exercem suas relações de liderança, comunicação, respeito e colaboração para com seus stakeholders, ou seja, suas soft skills, e orquestram as atividades necessárias para a conclusão satisfatória de um projeto. Sobre tal base, buscamos entender possíveis preconceitos e barreiras impostas às diferentes psicodemografias para, em sequência, observar quais impactos são percebidos pelos GP’s no exercício de suas atividades, bem como na progressão de suas carreiras. Trouxemos do campo entrevistas com vários GP’s de diferentes psicodemografias. A análise do discurso nos emprestou o ferramental para estudar os dados de campo, e abarcar conclusões sustentadas pela base teórica. Como resultado, percebemos que a cultura brasileira ainda apresenta mecanismos de dominação encarnados por um grupo androcêntrico, etnicamente branco e heterossexual, com prescrições e normas sobre a aparência física. Vimos também que as soft skills são influenciadas pela cultura local, principalmente quando são exercidas por minorias rejeitadas pelo grupo dominante. Percebemos a existência de portas e tetos de vidro na vida profissional de um GP que encarne determinados traços psicodemográficos, bem como uma introjeção de tal lógica androcêntrica. Tais profissionais exercem suas funções com um custo maior do que aquele realizado por homens, brancos, heterossexuais e de boa aparência, bem como precisam se mostrar resilientes à tal dominação. As barreiras para o gênero feminino também se erguem quando a GP mulher, mesmo em um contexto de liderança de uma organização temporária, exerce a maternidade.

Estudo da adesão de pinos endodônticos modificados superficialmente por plasma de oxigênio

The work presents the effect of plasma treatment when applied in fibers or carbon/glass posts in the adhesion fiber/resin and posts/cement. This has for objective the modification of the surface of the fibers, as well as the wettability of the posts, seeking the improvement of the adhesion and of the connection fiber/resin in the processing of polymeric composites reinforced with the same ones. 120 posts (Reforpost) were used and 30 meters of fibers of carbon and of glass (Fibrex), of the company Angelus. The samples were divided in three groups of 40 specimens: GROUP I - 20 posts of glass fiber and 20 of carbon without treatment to it shapes, GROUP II -20 posts of glass fiber and 20 of carbon treated to it shapes in the surface and GROUP III - 20 posts of glass fiber and 20 of carbon make with fibers in natura after plasma treatment. The plasma treatment was accomplished with oxygen and with temperature in the camera fixed at 200°C, for one hour of exhibition. The posts and the fibers were characterized before and after the treatment. The wettability was measure by pendent drop method, and interface fiber/resin and posts/cement were observed by optical and electronic microscopy. It was observed that both wettability and texture were increased with plasma treatment

Avaliação de concretos reforçados por confinamento com manta de fibra de vidro estrutural e pré-impreganada

Due to the occurrence of diseases in the use of structural reinforcements in composites, with presentation of concrete blanket detachment, has been identified the need to evaluate the performance of concrete reinforced with glass fiber. This study aims to evaluate these concretes by means of testing methodologies, using concrete with low resistance with structural reinforcement for confinement by preimpregnated glass fiber and traditional fiberglass blanket. The first stage of work was the development of methodologies for analysis, opting for four types, such as the acoustic survey, strength to compressive, the pull-off and ultrasound. Next, tests were carried out using the four selected methodologies in 30 of proof-of-specimens by 5x10 cm, 15 were reinforced with the traditional fiberglass blanket with 5specimens exposed to test a marine environment of marine coastline of Natal-RN and 15 were reinforced with a pre-impregnated glass fiber blanket, as well as 5specimens exposed to a test environment of the marine coastline of Natal-RN. After conducting the acoustic survey, it has been verified a lack of delaminating and air bubbles in the samples, confirming the absence of gross shortcomings in the implementation of the ribs both the traditional fiberglass blanket and in the preimpregnated fiber glass blanket. After carrying out methods of pull-off and compressive strengthening test it was observed that the reinforced proof-bodies with pre-impregnated glass blanket showed maximum stresses higher than the traditional fiberglass blanket; consequently a greater grip with the formation of a smaller area of . fracture, unlike traditional glass mat, which showed lower maximum stresses, with a greater area of fracture. It was also found that the traditional fiberglass blanket presented detachment of blanket-concrete interface, unlike the pre-impregnated fiberglass blanket, which showed a better grip on the blanket-concrete interface. In the trial of ultrasound there was no presence of cracks in the blanket-concrete interface, yielding to both blankets good compactness of the concrete. At the end of this work, they were developed and proposed two methods of testing for evaluation of reinforced concrete structures with composites, for standardization, the acoustic survey and pull-off

Construção de um aparato experimental para monitoramento in situ da deposição de filmes finos de titânio por magnetron sputtering

The technique of surface coating using magnetron sputtering is one of the most widely used in the surface engineering, for its versatility in obtaining different films as well as in the micro / nanometric thickness control. Among the various process parameters, those related to the active species of the plasma are of the most fundamental importance in the mechanism and kinetics of deposition. In order to identify the active species of the plasma, parameters such as gas flow, pressure and density of electric power were varied during titanium coating on glass substrate. By flowing argon gas of 10, 20, 30, 40 and 50 sccm (cubic centimeters per minute) for each gas flow a sequential scan of the electric current of 0.10, 0.20, 0.30, 0.40 , 0.50 A. The maximum value of 0.50 A was chosen based both on literature data and on limitations of the equipment. The monitoring of plasma species present during the deposition was carried out in situ by the technique of optical emission spectroscopy (OES) through the spectrometer Ocean Optics USB2000 Series. For this purpose, an apparatus was developed to adapt the OES inside the plasma reactor to stay positioned closest to the target. The radiations emitted by the species were detected by an optical fiber placed behind the glass substrate and their intensities as a function of wavelength were, displayed on a monitor screen. The acquisition time for each condition of the plain parameters was related to the minima of spectral lines intensities due to the film formed on the substrate. The intensities of different emission lines of argon and titanium were then analyzed as a function of time, to determine the active species and estimate the thickness of the deposited films. After the deposition, the coated glasses thin films were characterized by optical transmittance through an infrared laser. It was found that the thickness and deposition rate determined by in situ analysis were consistent with the results obtained by laser transmittance

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Pathogenicity of Metarhizium anisopliae for Ceratitis capitata (Wied.) (Diptera: Tephritidae) in soil with different pesticides

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Placas de aço inoxidável 316L aplicadas no reparo de fratura experimental diafisária do rádio e ulna de cães

O objetivo do presente trabalho foi o de estudar a resistência à corrosão em placas de aço inoxidável 316L, com diferentes tipos de acabamento e tratamento superficial, e a possível interferência dessa reação corrosiva na consolidação óssea. Utilizaram-se placas semi-acabadas, polidas, tratadas com jatos de microesferas de vidro e passivadas, as quais foram aplicadas na epífise distal do rádio de cães. Foram utilizados 12 animais, divididos em dois grupos, nos quais, após osteotomia bilateral do rádio e ulna, foram realizadas osteossínteses do rádio, totalizando 24 procedimentos. Avaliou-se a evolução clínica e radiográfica das regiões que receberam os implantes aos 30, 60, 90, 180, 240 e 360 dias. Os animais do grupo 1 (GI) foram sacrificados aos 180 dias e os do GII aos 360 dias para estudo histológico e de microscopia eletrônica de varredura do local da osteotomia sob a região dos implantes metálicos e para estudo da resistência à corrosão no organismo, pelos implantes metálicos, por meio de análises química e metalográfica (microscopia óptica e eletrônica de varredura e espectroscopia de espalhamento de energia por raios X). Os animais recuperaram a função dos membros operados 24 horas após a cirurgia. Radiograficamente, verificou-se a consolidação óssea em todos os animais. Macro e microscopicamente não foram observados sinais de corrosão nos implantes metálicos, exceto em uma placa passivada, aplicada no rádio esquerdo de um animal, na qual a corrosão foi detectada pela microscopia óptica e eletrônica de varredura. Este estudo permite concluir que as placas de aço inoxidável 316L, independente do acabamento superficial a que foram submetidas, não sofreram corrosão ou reações adversas e foram efetivas no tratamento das fraturas experimentais do rádio e ulna de cães.

Potencial de alimentação de Chrysoperla externa (Hagen, 1861) (Neuroptera, Chrysopidae) em diferentes densidades de Uroleucon ambrosiae (Thomas, 1878) (Hemiptera, Aphididae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito de diferentes dietas sobre o desenvolvimento pós-embrionário de Chrysoperla defreitasi Brooks (Neuroptera: Chrysopidae)

Avaliou-se o período pós-embrionário do predador Chrysoperla defreitasi Brooks alimentada com ovos de Sitotroga cerealella (Olivier) e Diatraea saccharalis (Fabricius) em condições de laboratório à temperatura de 25±2ºC, UR de 70±10% e fotofase de 14h. Os ovos do crisopídeo foram individualizados em tubos de vidro e, após a eclosão, as larvas foram alimentadas com as respectivas presas e mantidas em sala climatizada, sob condições controladas. O delineamento estatístico utilizado foi inteiramente casualizado com 150 repetições para cada dieta. As durações do 1º, 2º e 3º ínstar e da fase pupal foram, respectivamente, 3,4, 2,7, 3,5 e 11,9 dias para larvas alimentadas com D. saccharalis e 3,6, 2,8, 2,7 e 9,3 dias, quando a dieta oferecida foi ovos de S. cerealella. Larvas de crisopídeos alimentados com ovos de D. saccharalis levaram em média 21,5 dias para completar o desenvolvimento pós-embrionário, com 34,0% de adultos emergidos, enquanto que os alimentados com ovos de S. cerealella levaram 18,4 dias com 55,3% de adultos. Pode-se, pois, constatar que a melhor dieta para o desenvolvimento pós-embrionário de C. defreitasi foram os ovos de S. cerealella, sendo que insetos alimentados com esta dieta apresentaram período mais curto de desenvolvimento, maior viabilidade nos três ínstares larvais e no período pupal, produzindo maior número de adultos.