Development of a GPS-Based Sign Inventory Tool for Iowa’s Statewide Management System, May 2011

This report is on state-of-the-art research efforts specific to infrastructure inventory/data collection with sign inventory as a case study. The development of an agency-wide sign inventory is based on feature inventory and location information. Specific to location, a quick and simple location acquisition tool is critical to tying assets to an accurate location-referencing system. This research effort provides a contrast between legacy referencing systems (route and milepost) and global positioning system- (GPS-) based techniques (latitude and longitude) integrated into a geographic information system (GIS) database. A summary comparison of field accuracies using a variety of consumer grade devices is also provided. This research, and the data collection tools developed, are critical in supporting the Iowa Department of Transportation (DOT) Statewide Sign Management System development effort. For the last two years, a Task Force has embarked on a comprehensive effort to develop a sign management system to improve sign quality, as well as to manage all aspects of signage, from request, ordering, fabricating, installing, maintaining, and ultimately removing, and to provide the ability to budget for these key assets on a statewide basis. This effort supported the development of a sign inventory tool and is the beginning of the development of a sign management system to support the Iowa DOT efforts in the consistent, cost effective, and objective decision making process when it comes to signs and their maintenance.

Los hábitats del proyecto CORINE en el ámbito territorial catalán: delimitación y cartografía.

nd items. Once maps are drawn up they are digitized and put into a GIS and finally subjected to quality control. Table 4 shows the most important habitats (according to polygon number and area covered) and the least represented habitats in the sheets drawn so far. Sheets can be obtained through internet (www.gencat.net/mediamb/pn.htm).

A regional Industrial Symbiosis methodology and its implementation in Geneva, Switzerland

The Agenda 21 for the Geneva region is the results from a broad consultation process including all local actors. The article 12 stipulates that « the State facilitates possible synergies between economic activities in order to minimize their environmental impacts » thus opening the way for Industrial Ecology (IE) and Industrial Symbiosis (IS). An Advisory Board for Industrial Ecology and Industrial Symbiosis implementation was established in 2002 involving relevant government agencies. Regulatory and technical conditions for IS are studied in the Swiss context. Results reveal that the Swiss law on waste does not hinder by-product exchanges. Methodology and technical factors including geographic, qualitative, quantitative and economical aspects are detailed. The competition with waste operators in a highly developed recycling system is also tackled.The IS project develops an empirical and systematic method for detecting and implementing by-products synergies between industrial actors disseminated throughout the Geneva region. Database management tool for the treatment of input-output analysis data and GIS tools for detecting potentials industrial partners are constantly improved. Potential symbioses for 17 flows (including energy, water and material flows) are currently studied for implementation.

Contribution to the conservation biology of the wood ant Formica lugubris (Hymenoptera, Formicidae) in Switzerland

Summary Among ants, wood ants are probably the most fascinating and studied species in temperate European forests. Unfortunately, due to several threats they are nowadays registered in red lists. Recent studies made in the Swiss Jura Mountains ended up in the description of a new sympatric sibling species of Formica lugubris (i.e. Formica paralugubris Seifert 1996). Because of this confusion the biology of F. lugubris is incomplete. Due to the extreme difficulties to distinguish morphologically F. lugubris from F. paralugubris we studied their cuticular hydrocarbons profiles. Irrespective of their geographic origin, we observed quantitative discrimination between species within each caste (workers, males and gynes =young alate female). Moreover, using a behavioural taxonomic approach (i.e. the pupa-carrying test) we showed that ants preferred conspecific worker pupae to those of the sibling species. These first results allowed us to consider the two species as two separate taxonomic units. To understand their coexistence, habitat distribution models were fitted with GIS predictors and factors known to influence wood ant distribution. In the Jura Mountains, although the two species share very similar habitats, they are spatially segregated. F. lugubris occurs more frequently at woodland borders than in forest interiors. We demonstrated with genetic and field data that Formica lugubris displays two different social forms in close proximity in alpine zone (e.g. unmanaged forests of the Swiss National Park). We discovered populations mostly monogynous to weakly polygynous (i.e. one to a few egg laying queens per colony) and monodomous (i.e. one nest per colony), and polygynous/polydomous populations (new nests being founded by colony budding). It is generally admitted that monogyne species disperse well in order to find suitable habitat to found new colonies whereas polygyne species have restricted dispersal and local mating within the nest. In order to compare reproductive strategies of F. lugubris and F. paralugubris (i.e. matings and dealation process) we conducted experiments with sexuals. F, lugubris gynes from monogynous/monodomous populations do not show a local strategy like the obligately polygynous F. paralugubris (i.e. early dealation even without mating, insemination without flight activity and low fat reserve). They always keep their wings, do not mate when not able to fly and have high amount of fat content revealing high survival capacities. On the other side, F, lugubris gynes from polygynous/polydomous populations have lower lipid reserves and displayed a reproductive behaviour close to the F. para lugubris one. After dispersal, wood ant gynes can either start new societies by temporary social parasitism of another species (i.e. subgenus Serviformica) or be adopted intraspecifically in an existing nest. In F. lugubris, we demonstrated that gynes from monogynous/monodomous colonies showed a high success for temporary social parasitism compare to the lower success of gynes from polygynous/polydomous colonies. However, physiological analyses suggested that only gynes from monogynous/ monodomous populations can efficiently disperse and found new nest by temporary social parasitism. Intraspecifically, gynes were accepted to a high degree in polygynous nest and in monogynous nests as long as these nests contained sexuals. In conclusion, Formica lugubris displays a social and dispersal polymorphism (mixed mating and founding system) representing a behavioural plasticity in relation to environmental and ecological conditions. Therefore, conservation measures directed toward this species should try to maintain a maximum of diversity at the habitat level. Résumé Les fourmis des bois sont probablement parmi les espèces de fourmis les plus fascinantes et les plus étudiées des forêts tempérées Européennes. Actuellement, du fait de différentes menaces, elles figurent malheureusement sur listes rouges. Plusieurs études menées au sein du Jura Suisse ont abouti à la description d'une nouvelle espèce jumelle et sympatrique de Formica lugubris (F. para- lugubris Seifert 1996). A cause de cette confusion la biologie de F lugubris est lacunaire. La distinction morphologique de F. lugubris et de F. para lugubris est si difficile que nous avons étudié leurs hydrocarbures cuticulaires. Indépendamment de l'origine géographique, nous avons observé une discrimination quantitative entre les espèces au sein de chaque caste (ouvrières, mâles et jeunes femelles ailées). De plus, à l'aide d'une approche taxonomique comportementale (le test de transport de cocons) nous avons montré que les fourmis préfèrent des cocons d'ouvrières conspécifiques à ceux de l'espèce jumelle. Ces premiers résultats nous permettent de considérer ces deux espèces comme deux unités taxonomiques distinctes et valables. Afin de comprendre leur coexistence, des modèles mathématiques ont été développés avec des données SIG et des facteurs écologiques influençant la répartition des fournis des bois. Dans le Jura, même si elles partagent des habitats fortement similaires, les deux espèces n'occupent pas les mêmes secteurs. F. lugubris est plus fréquente en lisière forestière plutôt qu'en pleine forêt. Nous avons démontré grâce à des données génétiques et de terrain que F. lugubris présente deux formes sociales au sein de la zone alpine (forêts protégées du Parc National Suisse). D'autre part, nous avons découvert des populations monogynes à faiblement polygynes (une à quelques reines pondeuses par colonie) et monodomes (colonies composées d'une seule fourmilière), et des populations polygynes/polydomes (les nouveaux nids étant produit par bourgeonnement). Généralement, les espèces monogynes dispersent sur de grandes distances et peuvent coloniser des habitats favorables à la fondation de nouvelles colonies alors que les espèces polygynes possèdent une dispersion limitée avec des accouplements à l'intérieur des nids. Afin de comparer les stratégies de reproduction de F. lugubris et de F. paralugubris (accouplements et perte des ailes) nous avons mené des expériences avec les sexués. Les jeunes femelles ailées de F. lugubris issues de populations monogynes/monodomes ne présentent pas de stratégie locale comparée à l'espèce obligatoirement polygyne F paralugubris (perte des ailes précoce même si il n'y a pas eu accouplement, insémination possible sans avoir volé activement et faibles réserves de graisse). Elles conservent toujours leurs ailes, ne s'accouplent pas lorsqu'elles sont empêchées de voler et possèdent de grandes quantités de graisse révélant de fortes capacités de survie. D'autre part, les jeunes femelles ailées de F. lugubris provenant de populations polygynes/polydomes ont peu de réserves lipidiques et ont un comportement de reproduction proche de celles de F. paralugubris. Après leur dispersion, les jeunes sexués femelles de fourmis des bois peuvent soit fonder une nouvelle société par parasitisme social temporaire d'un nid d'une autre espèce (sous-genre Serviformica) soit être adoptées dans un nid déjà existant de leur propre espèce. Chez F. lugubris, nous avons pu démontrer que les jeunes sexués femelles de colonies monogynes/monodomes présentent un succès élevé au parasitisme sociale temporaire en comparaison au plus faible succès obtenu avec des sexués provenant de colonies polygynes/polydomes. Cependant, les données physiologiques suggèrent que seules les jeunes sexués femelles de populations mono-gynes/monodomes peuvent disperser efficacement et fonder un nouveau nid par parasitisme social temporaire. Au niveau intraspécifique, les jeunes femelles sont acceptées à un taux élevé dans les nids polygynes mais aussi dans les nids monogynes tant que ces nids possèdent encore de jeunes sexués. En conclusion, F. lugubris est caractérisée par un polymorphisme dans ses structures sociales et ses stratégies de dispersion (système mixte d'accouplement et de fondation) ce qui représente une forte plasticité comportementale en relation avec les conditions environnementales et écologiques. Par conséquent, les mesures de conservation de cette espèce devraient s'attacher à maintenir un maximum de diversité au niveau des habitats.

Estimating Design-Flood Discharges for Streams in Iowa Using Drainage-Basin and Channel-Geometry Characteristics, HR-322, 1993

Drainage-basin and channel-geometry multiple-regression equations are presented for estimating design-flood discharges having recurrence intervals of 2, 5, 10, 25, 50, and 100 years at stream sites on rural, unregulated streams in Iowa. Design-flood discharge estimates determined by Pearson Type-III analyses using data collected through the 1990 water year are reported for the 188 streamflow-gaging stations used in either the drainage-basin or channel-geometry regression analyses. Ordinary least-squares multiple-regression techniques were used to identify selected drainage-basin and channel-geometry regions. Weighted least-squares multiple-regression techniques, which account for differences in the variance of flows at different gaging stations and for variable lengths in station records, were used to estimate the regression parameters. Statewide drainage-basin equations were developed from analyses of 164 streamflow-gaging stations. Drainage-basin characteristics were quantified using a geographic-information-system (GIS) procedure to process topographic maps and digital cartographic data. The significant characteristics identified for the drainage-basin equations included contributing drainage area, relative relief, drainage frequency, and 2-year, 24-hour precipitation intensity. The average standard errors of prediction for the drainage-basin equations ranged from 38.6% to 50.2%. The GIS procedure expanded the capability to quantitatively relate drainage-basin characteristics to the magnitude and frequency of floods for stream sites in Iowa and provides a flood-estimation method that is independent of hydrologic regionalization. Statewide and regional channel-geometry regression equations were developed from analyses of 157 streamflow-gaging stations. Channel-geometry characteristics were measured on site and on topographic maps. Statewide and regional channel-geometry regression equations that are dependent on whether a stream has been channelized were developed on the basis of bankfull and active-channel characteristics. The significant channel-geometry characteristics identified for the statewide and regional regression equations included bankfull width and bankfull depth for natural channels unaffected by channelization, and active-channel width for stabilized channels affected by channelization. The average standard errors of prediction ranged from 41.0% to 68.4% for the statewide channel-geometry equations and from 30.3% to 70.0% for the regional channel-geometry equations. Procedures provided for applying the drainage-basin and channel-geometry regression equations depend on whether the design-flood discharge estimate is for a site on an ungaged stream, an ungaged site on a gaged stream, or a gaged site. When both a drainage-basin and a channel-geometry regression-equation estimate are available for a stream site, a procedure is presented for determining a weighted average of the two flood estimates.

Development of a New Process for Determining Design Year Traffic Demands, TR-528, 2007

Researchers should continuously ask how to improve the models we rely on to make financial decisions in terms of the planning, design, construction, and maintenance of roadways. This project presents an alternative tool that will supplement local decision making but maintain a full appreciation of the complexity and sophistication of today’s regional model and local traffic impact study methodologies. This alternative method is tailored to the desires of local agencies, which requested a better, faster, and easier way to evaluate land uses and their impact on future traffic demands at the sub-area or project corridor levels. A particular emphasis was placed on scenario planning for currently undeveloped areas. The scenario planning tool was developed using actual land use and roadway information for the communities of Johnston and West Des Moines, Iowa. Both communities used the output from this process to make regular decisions regarding infrastructure investment, design, and land use planning. The City of Johnston case study included forecasting future traffic for the western portion of the city within a 2,600-acre area, which included 42 intersections. The City of West Des Moines case study included forecasting future traffic for the city’s western growth area covering over 30,000 acres and 331 intersections. Both studies included forecasting a.m. and p.m. peak-hour traffic volumes based upon a variety of different land use scenarios. The tool developed took goegraphic information system (GIS)-based parcel and roadway information, converted the data into a graphical spreadsheet tool, allowed the user to conduct trip generation, distribution, and assignment, and then to automatically convert the data into a Synchro roadway network which allows for capacity analysis and visualization. The operational delay outputs were converted back into a GIS thematic format for contrast and further scenario planning. This project has laid the groundwork for improving both planning and civil transportation decision making at the sub-regional, super-project level.

Soft Photogrammetry for Highway Engineering, HR-387, 1998

The SoftPlotter, a soft photogrammetric software and Silicon Graphics workstation, was used to evaluate the accuracy of soft photogrammetry and identify applications of this technology to highway engineering. A comparative study showed that SoftPlotter compares well with other software such as Socket and Integraph. The PC software TNTMips is inexpensive but needs further development to be comparable to SoftPlotter. The Campus Project showed that soft photogrammetry is accurate for traditional photogrammetric applications. It is also accurate for producing orthophoto and base maps for Geographic Information Systems (GISs). The Highway Project showed that soft photogrammetry is accurate for highway engineering and that the technical staff at the Iowa Department of Transportation (IA DOT) can be easily trained in this new technology. The research demonstrated that soft photogrammetry can be used with low-flight helicopter photography for large-scale mapping in highway engineering. The researchers recommend that research be conducted to test the use of digital cameras instead of the traditional aerial cameras in helicopter photography. Research that examines the use of soft photogrammetry with video logging imagery for inventory and GIS studies in highway maintenance is also recommended. Research is also warranted into the integration of soft photogrammetry with virtual reality, which can be used in three-dimensional designing and visualization of highways and subdivisions in real time. The IA DOT owns one analytical plotter and two analogue plotters. The analytical plotter is used for aerial triangulation, and the analogue plotters are used for plotting. However, neither is capable of producing orthophotos. Therefore, the researchers recommend that the IA DOT purchase soft photogrammetric workstations for orthophoto production, and if and when required, use it for aerial triangulation and plotting. In the future, the analogue plotters may become obsolete. At that time, the researchers recommend that the analogue plotters be phased out and replaced by soft photogrammetric workstations.

Flujos de detritos recientes en la cordillera frontal de Mendoza: Un ejemplo de riesgo natural en la ruta 7 = Recent debris flows in the Frontal Cordillera of Mendoza: An example of natural risk on the Road 7

In this paper is presented a study dealing with the debris flows that reached the national road 7 in January 2005, in the km 1,118.5, Mendoza province. The area is located in the Frontal Cordillera near the limit of the Precordillera. A detailed geomorphologic map has been realized for this study using a Quickbird satellite imagery of the year 2006. Various calculations of volumes, velocities and peak discharges have been performed with the field data and using a geographic information system (GIS). The geomorphologic survey has permitted to propose three propagation scenarios in case of a new event. These allowed creating a map of debris flows susceptibility for the stretch of the road that has been studied. Finally, it has been proposed protection and mitigation measures, based on the results of the study, to protect the road from a new event.

Développement d'une méthode microgravimétrique urbaine : intégration dans un SIG et application au projet du M2 lausannois

Résumé La réalisation d'une seconde ligne de métro (M2) dès 2004, passant dans le centre ville de Lausanne, a été l'opportunité de développer une méthodologie concernant des campagnes microgravimétriques dans un environnement urbain perturbé. Les corrections topographiques prennent une dimension particulière dans un tel milieu, car de nombreux objets non géologiques d'origine anthropogénique comme toutes sortes de sous-sols vides viennent perturber les mesures gravimétriques. Les études de génie civil d'avant projet de ce métro nous ont fournis une quantité importante d'informations cadastrales, notamment sur les contours des bâtiments, sur la position prévue du tube du M2, sur des profondeurs de sous-sol au voisinage du tube, mais aussi sur la géologie rencontré le long du corridor du M2 (issue des données lithologiques de forages géotechniques). La planimétrie des sous-sols a été traitée à l'aide des contours des bâtiments dans un SIG (Système d'Information Géographique), alors qu'une enquête de voisinage fut nécessaire pour mesurer la hauteur des sous-sols. Il a été alors possible, à partir d'un MNT (Modèle Numérique de Terrain) existant sur une grille au mètre, de mettre à jour celui ci avec les vides que représentent ces sous-sols. Les cycles de mesures gravimétriques ont été traités dans des bases de données Ac¬cess, pour permettre un plus grand contrôle des données, une plus grande rapidité de traitement, et une correction de relief rétroactive plus facile, notamment lorsque des mises à jour de la topographie ont lieu durant les travaux. Le quartier Caroline (entre le pont Bessières et la place de l'Ours) a été choisi comme zone d'étude. Le choix s'est porté sur ce quartier du fait que, durant ce travail de thèse, nous avions chronologiquement les phases pré et post creusement du tunnel du M2. Cela nous a permis d'effectuer deux campagnes gravimétriques (avant le creu¬sement durant l'été 2005 et après le creusement durant l'été 2007). Ces réitérations nous ont permis de tester notre modélisation du tunnel. En effet, en comparant les mesures des deux campagnes et la réponse gravifique du modèle du tube discrétisé en prismes rectangulaires, nous avons pu valider notre méthode de modélisation. La modélisation que nous avons développée nous permet de construire avec détail la forme de l'objet considéré avec la possibilité de recouper plusieurs fois des interfaces de terrains géologiques et la surface topographique. Ce type de modélisation peut s'appliquer à toutes constructions anthropogéniques de formes linéaires. Abstract The realization of a second underground (M2) in 2004, in downtown Lausanne, was the opportunity to develop a methodology of microgravity in urban environment. Terrain corrections take on special meaning in such environment. Many non-geologic anthropogenic objects like basements act as perturbation of gravity measurements. Civil engineering provided a large amount of cadastral informations, including out¬lines of buildings, M2 tube position, depths of some basements in the vicinity of the M2 corridor, and also on the geology encountered along the M2 corridor (from the lithological data from boreholes). Geometry of basements was deduced from building outlines in a GIS (Geographic Information System). Field investigation was carried out to measure or estimate heights of basements. A DEM (Digital Elevation Model) of the city of Lausanne is updated from voids of basements. Gravity cycles have been processed in Access database, to enable greater control of data, enhance speed processing, and retroactive terrain correction easier, when update of topographic surface are available. Caroline area (between the bridge Saint-Martin and Place de l'Ours) was chosen as the study area. This area was in particular interest because it was before and after digging in this thesis. This allowed us to conduct two gravity surveys (before excavation during summer 2005 and after excavation during summer 2007). These re-occupations enable us to test our modélisation of the tube. Actually, by comparing the difference of measurements between the both surveys and the gravity response of our model (by rectangular prisms), we were able to validate our modeling. The modeling method we developed allows us to construct detailed shape of an object with possibility to cross land geological interfaces and surface topography. This type of modélisation can be applied to all anthropogenic structures.

Hydraulinen tulvamallinnus paikkatietomenetelmien avulla : Mö©ʻrudalur, Koillis-Islanti

English abstract

Predictive analysis and mapping of indoor radon concentrations in Switzerland

It is estimated that around 230 people die each year due to radon (222Rn) exposure in Switzerland. 222Rn occurs mainly in closed environments like buildings and originates primarily from the subjacent ground. Therefore it depends strongly on geology and shows substantial regional variations. Correct identification of these regional variations would lead to substantial reduction of 222Rn exposure of the population based on appropriate construction of new and mitigation of already existing buildings. Prediction of indoor 222Rn concentrations (IRC) and identification of 222Rn prone areas is however difficult since IRC depend on a variety of different variables like building characteristics, meteorology, geology and anthropogenic factors. The present work aims at the development of predictive models and the understanding of IRC in Switzerland, taking into account a maximum of information in order to minimize the prediction uncertainty. The predictive maps will be used as a decision-support tool for 222Rn risk management. The construction of these models is based on different data-driven statistical methods, in combination with geographical information systems (GIS). In a first phase we performed univariate analysis of IRC for different variables, namely the detector type, building category, foundation, year of construction, the average outdoor temperature during measurement, altitude and lithology. All variables showed significant associations to IRC. Buildings constructed after 1900 showed significantly lower IRC compared to earlier constructions. We observed a further drop of IRC after 1970. In addition to that, we found an association of IRC with altitude. With regard to lithology, we observed the lowest IRC in sedimentary rocks (excluding carbonates) and sediments and the highest IRC in the Jura carbonates and igneous rock. The IRC data was systematically analyzed for potential bias due to spatially unbalanced sampling of measurements. In order to facilitate the modeling and the interpretation of the influence of geology on IRC, we developed an algorithm based on k-medoids clustering which permits to define coherent geological classes in terms of IRC. We performed a soil gas 222Rn concentration (SRC) measurement campaign in order to determine the predictive power of SRC with respect to IRC. We found that the use of SRC is limited for IRC prediction. The second part of the project was dedicated to predictive mapping of IRC using models which take into account the multidimensionality of the process of 222Rn entry into buildings. We used kernel regression and ensemble regression tree for this purpose. We could explain up to 33% of the variance of the log transformed IRC all over Switzerland. This is a good performance compared to former attempts of IRC modeling in Switzerland. As predictor variables we considered geographical coordinates, altitude, outdoor temperature, building type, foundation, year of construction and detector type. Ensemble regression trees like random forests allow to determine the role of each IRC predictor in a multidimensional setting. We found spatial information like geology, altitude and coordinates to have stronger influences on IRC than building related variables like foundation type, building type and year of construction. Based on kernel estimation we developed an approach to determine the local probability of IRC to exceed 300 Bq/m3. In addition to that we developed a confidence index in order to provide an estimate of uncertainty of the map. All methods allow an easy creation of tailor-made maps for different building characteristics. Our work is an essential step towards a 222Rn risk assessment which accounts at the same time for different architectural situations as well as geological and geographical conditions. For the communication of 222Rn hazard to the population we recommend to make use of the probability map based on kernel estimation. The communication of 222Rn hazard could for example be implemented via a web interface where the users specify the characteristics and coordinates of their home in order to obtain the probability to be above a given IRC with a corresponding index of confidence. Taking into account the health effects of 222Rn, our results have the potential to substantially improve the estimation of the effective dose from 222Rn delivered to the Swiss population.

08008-004 Rathbun Lake Final Report

The Rathbun Land and Water Alliance and partners have undertaken a highly effective approach to water quality protection through the Rathbun Lake Special Project. This approach is achieving a significant reduction in the sediment and phosphorus that impair water quality in Rathbun Lake and its tributaries as a result of the targeted application of best management practices (BMPs) for priority land in the watershed. This project application proposes to assist landowners to apply BMPs that will reduce sediment and phosphorus delivery from priority land in one targeted sub-watershed as part of the Rathbun Lake Special Project. Features of this project are: (1) use of geographic information system (GIS) analysis to identify priority land that requires BMPs; (2) assistance for landowners to apply BMPs on 1,450 acres that will reduce the annual delivery of sediment by 2,160 tons and phosphorus by 8,210 pounds; (3) evaluation of the benefits from BMP application using GIS analysis and water quality monitoring; and (4) watershed outreach activities that encourage landowners to apply BMPs for priority land to protect water quality.

Finland mellan 'öst' och 'väst' - en jämförelse av 23 politiska system i EU

Abstract: Finland between th 'East' and the 'West' - comparison of political systems of 23 EU member states