998 resultados para Fluxos de Anosov
Resumo:
O item não apresenta o texto completo, para aquisição do livro na íntegra você poderá acessar a Editora da UFSCar por meio do link: www.editora.ufscar.br
Resumo:
Este trabalho tem por objectivo desenvolver eimplementar metodologias relacionadas com a temática de térmica de edifícos, no sentido dequantificar e optimizar as perdas e ganhos decalor e os consumos de energia associados aosedifícios. Com base na teoria de transferência de calor e massa, foram construídos programas de cálculo numérico para simular, em regime estacionário (permanente) e não estacionário (transiente), os fluxos de calor e a distribuição das temperaturas em diferentes tipos de paredes comummente encontradas em Portugal e em particular na Região Autónoma da Madeira. Estes resultados permitiram analisar a eficácia dos diversos tipos de paredes estudadas bem como o risco de condensação em algumas dessas situações. Para além deste estudo houve a preocupação de desenvolver uma metodologia de análise económica relacionada com a espessura de isolamento a aplicar. Foram igualmente estudadas algumas medições simples de conservação de energia cuja implementação em edifícios será facilmente ustificada atendendo aos baixos períodos de retorno de investimento geralmente associados a estas medidas. Como resultado deste trabalho foi desenvolvida uma ferramenta de cálculo cuja aplicaçãovai permitir não só estimar o risco decondensação mas igualmente o campo de temperaturas no interior das paredes ao longo do período de tempo considerado, visando a optimização de soluções de isolamento térmico versus condições de conforto recomendadas.
Resumo:
Partindo de um sentido de inovação pedagógica assente numa concepção de clara ruptura com abordagens pedagógicas tradicionalistas ligadas a uma certa perspectiva transmissiva/reprodutiva do saber, o presente trabalho de investigação analisa a utilização, em contexto curricular escolar, de uma plataforma de e-learning, considerando um enquadramento referencial de natureza construtivista, no qual, o aluno possa assumir um papel central e activo, na criação do seu próprio conhecimento. Consistindo numa abordagem de natureza qualitativa, o estudo de caso apresentado releva um paradigma interpretativo decorrente da análise da utilização, pelos alunos, de uma turma do 4º Ano de escolaridade, da plataforma de e-learning ―Escola Virtual™‖. Para tal intento, a diversidade de técnicas de recolha de dados — observação participante, entrevistas , e análise documental — ao permitirem uma triangulação dos mesmos, fundamentam um aprofundado sentido de comprensão do fenómeno analisado. Deste modo, a investigação centra-se em 3 componentes referenciais: Componente Pedagógica, Componente de Conteúdos e Componente de Interface. Os resultados obtidos revelam que, no âmbito da primeira componente, surgem especialmente facilitados os processos colaborativos entre os alunos, embora num contexto de interacção presencial e com carácter essencialmente pontual; a actuação docente, mantendo o seu carácter imprescindível, adquire uma dimensão de maior proximidade e orientação dos alunos enquanto, por seu turno, o nível motivacional dos alunos é estimulado, focalizando o aluno nas tarefas de aprendizagem. A natureza do feedback presente, no entanto, revelou-se um factor com efeitos prejudiciais para os processos de reflexão e metacognição dos alunos. No respeitante aos conteúdos, foi evidente alguma ligeireza e fragilidade de concepção em muitos deles, comprovada por uma quantidade expressiva de erros e lapsos de diversa natureza; enquanto que a natureza pré-formatada dos conteúdos — estruturando-os em ―Objectos de Aprendizagem‖ — limitou significativamente a possibilidade de desenvolvimento de procressos activos e criativos por parte do aluno, bem como, anulando a capacidade de abordagem de competências de natureza prática previstas no Programa Nacional do Ensino Básico. Por fim, o interface que, embora caracterizando-se pela sua intuitividade e simplicidade, suporta um limitado grau de controlo, pelos alunos, sobre os fluxos interactivos, reduzidos às suas expressões mais elementares. No seu aspecto global podemos considerar que, num contexto curricular escolar, a plataforma ―Escola Virtual‖ não se constitui como uma ferramenta de aprendizagem capaz de se enquadrar num paradigma de inovação pedagógica congruente com o sentido atrás defendido,não obstante possamos entender, que a mesma, constitua uma potencial mais-valia no âmbito da consolidação e testagem de conhecimentos préviamente adquiridos.
Resumo:
As aluviões, também denominadas por fluxos de detritos ou enxurradas, são movimentos de vertente rápidos, que ocorrem por ação da água e são consideradas um dos fenómenos mais perigosos em regiões montanhosas, causando prejuízos por onde passam. Como forma de prevenção, mas também como forma de estudo das condições inerentes à formação destes fenómenos e do respetivo comportamento ao longo do seu percurso, deve ser atribuído um papel importante à monitorização automática dos cursos de água. Na Ilha da Madeira, a aluvião mais recente aconteceu a 20 de fevereiro de 2010, afetando os concelhos da vertente Sul, particularmente os do Funchal e Ribeira Brava. Este evento surgiu devido a uma situação meteorológica adversa, com precipitações de elevada intensidade, resultando no transporte de um elevado volume de material sólido que levou ao transbordamento das ribeiras, obstruindo completamente a baixa funchalense e outros locais. Portanto, esta dissertação surge como introdução à temática do estudo e monitorização dos fluxos de detritos na Ilha da Madeira, onde, inicialmente, foi realizada uma primeira abordagem ao fenómeno, referindo as suas causas e características, tendo sido, também, mencionadas algumas das aluviões que assolaram a ilha. Posteriormente, foram descritos alguns dos equipamentos incluídos num sistema de monitorização, com as respetivas vantagens e desvantagens, bem como a descrição de alguns sistemas existentes. Como objetivo deste trabalho, foi idealizada uma solução de monitorização automática para a bacia hidrográfica da Ribeira de Machico, tendo sido analisadas as propriedades morfológicas da bacia, seguindo-se uma descrição dos sensores utilizados e a sua localização. Por fim, como caso de estudo, foi apresentado o sistema de monitorização a ser implementado pelo LREC (Laboratório Regional de Engenharia Civil), onde foram definidos os aparelhos utilizados, bem como a respetiva localização.
Resumo:
VANTI, Nadia. Links hipertextuais na comunicação científica: análise webométrica dos sítios acadêmicos latino-americanos em Ciências Sociais. Porto Alegre, 2007. 292 f. Tese (Doutorado em Comunicação e Informação) – Universidade Federal do Rio Grande do Sul. Porto Alegre, 2007.
Resumo:
This study aims at solidifying the theoretical bases to provide, above all, an explanation for this phenomenon which currently happens, with a scenario of social, political, economic and cultural transformations worldwide in medium cities. Nevertheless, because it has different dimensions from its transformation axes, gentrification comes with change, but also with the introduction of a new purpose in the space using and occupation, outlining in this context the identity of places from the formation of centralities with the presence of flows with social and economic dynamicsThe current forms of geographic space appropriation show the directions of the senses and ideological profile which recreates the meanings and uses of content and materials from descriptions of a historical past. However, today there is an economic context in the urban space which refers to a search of strategies for change, i.e., the acquisition of parameter aimed at meeting the demands of the relationship between capital and labor, which ends up overriding some actions for the specification of the transformation methods within the urban space to be explained by new needs and also by the agents from the value adding to their interests and investments. Thus, we assume that the appreciation/gentrification of urban spaces may or may not result from the building of a public space, since the dialogic structure as a place of political interaction externalize conflicts and disagreements in general; it keeps segregating spaces. As new spaces are transformed, the access to them tends to happen with particular restriction, whereas some places like parks, shopping malls, high-rise and horizontal condos are the scene for major professional and family events. In this context, the gentrification process is used to designate interventions in the urban environment, in certain city spaces which are considered central to public and private investments. A historical place is permitted to be presented as a scenario, a stage full of attractions, through the transformation process. Studying gentrification consists of an analysis of the underlying interests in the transformation of these areas, and especially of the assessment of the interest level in the private sector to partner in order to modify the landscape. Gentrification results from the transformation processes of capital, which influences the efforts and investments application in order to establish and achieve optimal economic growth, focusing on a location socio-culturally centered in the urban space. Thus, the urban social structure develops in the light of some questions that relate not only the cities growth but also environmental conditions it provides in cities like Mossoro, State of Rio Grande do Norte, Brazil 2005 a 2011.
Resumo:
Considering that urban interventions, planned and executed recently at Natal, RN, should put Ribeira - one of the town centers - in the new limits of the expanded center of the city, this work examines the use of this new accessibility for the benefit of the development of an infrastructure to support a type of tourism currently seen as an alternative to diversification into areas dominated by entertainment tourism (the case of Natal). A local with city's traditional cultural facilities and holder of a set built that is a synthesis of the images of the neighborhood, it fears that this increase in the potential for movement and flows of use stimulate speculation and deployment of a bulk type of activity incompatible with the preservation the architectural heritage. Important economy for the city, tourism has been showing a factor propellant processing urban related changes in accessibility. It is argued that cultural tourism, often used in plans and projects of revitalization across the country, may be factor for sustainable development and conserve the assets, and contributes to the process of revitalization of the historic cultural center as Ribeira. Intended to illustrate the need to consider other information that might help in the revitalization of the neighborhood, this research presents the offer cultural tourism of Ribeira and identifies and maps certain physical attributes that, combined with functional attributes, can stimulate or inhibit the diversity and vitality in the region
Resumo:
Building design is an effective way to achieve HVAC energy consumption reduction. However, this potentiality is often neglected by architects due to the lack of references to support design decisions. This works intends to propose architectural design guidelines for energy efficiency and thermal performance of Campus/UFRN buildings. These guidelines are based on computer simulations results using the software DesignBuilder. The definition of simulation models has begun with envelope variables, partially done after a field study of thirteen buildings at UFRN/Campus. This field study indicated some basic envelope patterns that were applied in simulation models. Occupation variables were identified with temperature and energy consumption monitoring procedures and a verification of illumination and equipment power, both developed at the Campus/UFRN administration building. Three simulation models were proposed according to different design phases and decisions. The first model represents early design decisions, simulating the combination of different types of geometry with three levels of envelope thermal performance. The second model, still as a part of early design phase, analyses thermal changes between circulation halls lateral and central and office rooms, as well as the heat fluxes and monthly temperatures in each circulation hall. The third model analyses the influence of middle-design and detail design decisions on energy consumption and thermal performance. In this model, different solutions of roofs, shading devices, walls and external colors were simulated. The results of all simulation models suggest a high influence of thermal loads due to the incidence of solar radiation on windows and surfaces, which highlights the importance of window shading devices, office room orientation and absorptance of roof and walls surfaces
Resumo:
João Pessoa, the capital city of the state of Paraíba (Northeast Brazil), is reputed throughout the country as a quiet place, although it has been acquiring, over the past years, an urban character with social implications similar to those of major metropolitan Brazilian areas. The new situation is evident by the social inequalities, with the creation of confined spaces, which segregate and cause enclosure of the inhabitants, leading to death the public space. This study correlates accessibility in spatial structure with two types of crime data, burglary and robbery, recorded in 2008 and 2009, by the Secretaria de Segurança da Paraíba (The government agency public in charge of safety), in the district of Manaíra, an upper middle class neighborhood, which has, in recent times, been considered one of the most violent areas in João Pessoa. Sought to understand connections between these events and morpho-social aspects of the built environment, where examined the spatial properties, such as accessibility of the urban net, the presence of control measures, the safety of buildings and their uses. Spatial properties were also validated by the observation of pedestrian flows at strategic points of the study area. It was concluded that the presence of intense flows helps to attract potential thieves, physical security and control offers little protection
Resumo:
This study reviews the spatial configuration from the road network of an urban compound formed by the cities of Crato, Juazeiro do Norte and Barbalha (the Crajubar - core of the Cariri metropolitan region, in the State of Ceará, Brazil), in order to establish nexus (or relations) between different levels of accessibility and the formation/ transformation and specialization of centralities in local and metropolitan scales. Stemming from the Social Logic of Space theoretical and operational apparatus, the study explores modeling possibilities (with axial lines, segments and lines of continuity) which is then confronted to empirical observations concerning movement flows and land use, within a Geographic Information System database. At different scales of analysis, the results suggest evidences of continuity were found in the permanence of intra-urban centres and sub-centres within each town, whereas evidences of change pointed out to the formation of a new centrality of metropolitan magnitude in the neighbourhood referred to as the Triângulo, in the municipality of Juazeiro, where high levels of topological accessibility coincides with the appearance of new business buildings as well as with the emergence of urban equipment of a scale more adequate to meet a regional demand
Influência das espécies ativas na absorção de intersticiais durante a carbonitretação a plasma do TI
Resumo:
Physical-chemical properties of Ti are sensible to the presence of interstitial elements. In the case of thermochemical treatments plasma assisted, the influence of different active species is not still understood. In order to contribute for such knowledge, this work purposes a study of the role played by the active species atmosphere into the Ar N2 CH4 carbonitriding plasma. It was carried out a plasma diagnostic by OES (Optical Emission Spectroscopy) in the z Ar y N2 x CH4 plasma mixture, in which z, y and x indexes represent gas flow variable from 0 to 4 sccm (cm3/min). The diagnostic presents abrupt variations of emission intensities associated to the species in determined conditions. Therefore, they were selected in order to carry out the chemical treatment and then to investigate their influences. Commercial pure Ti disks were submitted to plasma carbonitriding process using pre-established conditions from the OES measurements while some parameters such as pressure and temperature were maintained constant. The concentration profiles of interstitial elements (C and N atoms) were determined by Resonant Nuclear Reaction Analysis (NRA) resulting in a depth profile plots. The reactions used were 15N(ρ,αγ)12C and 12C(α,α)12C. GIXRD (Grazing Incidence X-Ray Diffraction) analysis was used in order to identify the presence of phases on the surface. Micro-Raman spectroscopy was used in order to qualitatively study the carbon into the TiCxN1 structure. It has been verified which the density species effectively influences more the diffusion of particles into the Ti lattice and characteristics of the layer formed than the gas concentration. High intensity of N2 + (391,4 nm) and CH (387,1 nm) species promotes more diffusion of C and N. It was observed that Hα (656,3 nm) species acts like a catalyzer allowing a deeper diffusion of nitrogen and carbon into the titanium lattice.
Resumo:
Titanium nitride films were grown on glass using the Cathodic Cage Plasma Deposition technique in order to verify the influence of process parameters in optical and structural properties of the films. The plasma atmosphere used was a mixture of Ar, N2 and H2, setting the Ar and N2 gas flows at 4 and 3 sccm, respectively and H2 gas flow varied from 0, 1 to 2 sccm. The deposition process was monitored by Optical Emission Spectroscopy (OES) to investigate the influence of the active species in plasma. It was observed that increasing the H2 gas flow into the plasma the luminescent intensities associated to the species changed. In this case, the luminescence of N2 (391,4nm) species was not proportional to the increasing of the H2 gas into the reactor. Other parameters investigated were diameter and number of holes in the cage. The analysis by Grazing Incidence X-Ray Diffraction (GIXRD) confirmed that the obtained films are composed by TiN and they may have variations in the nitrogen amount into the crystal and in the crystallite size. The optical microscopy images provided information about the homogeneity of the films. The atomic force microscopy (AFM) results revealed some microstructural characteristics and surface roughness. The thickness was measured by ellipsometry. The optical properties such as transmittance and reflectance (they were measured by spectrophotometry) are very sensitive to changes in the crystal lattice of the material, chemical composition and film thicknesses. Therefore, such properties are appropriate tools for verification of this process control. In general, films obtained at 0 sccm of H2 gas flow present a higher transmittance. It can be attributed to the smaller crystalline size due to a higher amount of nitrogen in the TiN lattice. The films obtained at 1 and 2 sccm of H2 gas flow have a golden appearance and XRD pattern showed peaks characteristics of TiN with higher intensity and smaller FWHM (Full Width at Half Maximum) parameter. It suggests that the hydrogen presence in the plasma makes the films more stoichiometric and becomes it more crystalline. It was observed that with higher number of holes in the lid of the cage, close to the region between the lid and the sample and the smaller diameter of the hole, the deposited film is thicker, which is justified by the most probability of plasma species reach effectively the sample and it promotes the growth of the film
Resumo:
Interstitial compounds of titanium have been mainly studied due to the large range of properties acquired when C, N, O and H atoms are added. In this work, surfaces of TiCxNy were produced by thermochemical treatments assisted by plasma with different proportions of Ar + N2 + CH4 gas mixture. The Ar gas flow was fixed in 4 sccm, varying only N2 and CH4 gas flows. During the thermochemical treatment, the plasma was monitored by Optical Emission Spectroscopy (OES) for the investigation of the influence of active species. After treatments, C and N concentration profile, crystalline and amorphous phases were analyzed by Nuclear Reaction (NRA). Besides tribomechanical properties of the Ti surface were studied through the nanohardness measurements and friction coefficient determination. The worn areas were evaluated by profilometry and Scanning Electronic Microscope (SEM) in order to verify the wear mechanism present in each material. It has been seen which the properties like nanohardness and friction coefficient have strong relation with luminous intensity of species of the plasma, suggesting a using of this characteristic as a parameter of process
Resumo:
Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ° C, was effective in the reduction process of Ta2O5
Resumo:
Plasma diagnostics by Optical Emission Spectroscopy were performed for electrical discharge in three gas mixture respecting the combinations z N2 y Ar x H2, z N2 y Ar x O2 e z N2 y Ar x CH4, in which the indexes z and y systematically vary from 1 to 4 and x varies from 0 to 4, every one has dimension SCCM, resulting in 80 combinations. From the all obtained spectrums, the species CH (387,1 nm), N2+ (391,4 nm), Hβ (486,1 nm), Hα (656,3 nm), Ar (750,4 nm), O (777,4 nm) e O (842,6 nm) were analyzed because of their abundance and importance on the kinetic of reaction from the plasma to surface, besides their high dependences on the gases flows. Particularly interesting z, y and x combinations were chosen in order to study the influence of active species on the surface modification during the thermochemical treatment. From the mixtures N2 Ar O2 e N2 Ar CH4 were chosen three peculiar proportions which presented luminous intensity profile with unexpected maximum or minimum values, denominated as plasma anomaly. Those plasma concentrations were utilized as atmosphere of titanium treatment maintaining constant the control parameters pressure and temperature. It has been verified a relation among luminous intensity associated to N2+ and roughness, nanohardness and O atoms diffusion into the crystalline lattice of treated titanium and it has been seen which those properties becomes more intense precisely in the higher points found in the optical profile associated to the N2+ specie. Those parameters were verified for the mixture which involved O2 gas. For the mixture which involves CH4 gas, the relation was determinate by roughness, number of nitrogen and carbon atoms diffused into the titanium structure which presented direct proportionality with the luminous intensity referent to the N2+ and CH. It has been yet studied the formation of TiCN phases on the surface which presented to be essentially directly proportional to the increasing of the CH specie and inversely proportional to the increasing of the specie N2+