Finite element analysis of anisotropic optical waveguide with arbitrary index profile

This work presents the application of a scalar finite element formulation for Ex (TE-like) modes in anisotropic planar and channel waveguides with diagonal permittivity tensor, diffused in both transversal directions. This extended formulation considers explicitly both the variations of the refractive index and their spatial derivates inside of each finite element. Dispersion curves for Ex modes in planar and channel waveguides are shown, and the results compared with solutions obtained by other formulations.

Abelian vectors and self-dual tensors in six-dimensional supergravity

In this note we describe the most general coupling of abelian vector and tensor multiplets to six-dimensional (1,0) supergravity. As was recently pointed out, it is of interest to consider more general Chern-Simons couplings to abelian vectors of the type H(r) = dB(r) - 1/2 c(rab)AadAb, with c(r) matrices that may not be simultaneously diagonalized. We show that these couplings can be related to Green-Schwarz terms of the form B(r)c(r)/abFaFb, and how the complete local Lagrangian, that embodies factorized gauge and supersymmetry anomalies (to be disposed of by fermion loops) is uniquely determined by Wess-Zumino consistency conditions, aside from an arbitrary quartic coupling for the gauginos. (C) 2000 Elsevier Science B.V.

On the Optimality of Finite Constellations from Algebraic Lattices

A construction technique of finite point constellations in n-dimensional spaces from ideals in rings of algebraic integers is described. An algorithm is presented to find constellations with minimum average energy from a given lattice. For comparison, a numerical table of lattice constellations and group codes is computed for spaces of dimension two, three, and four. © 2001.

Investigations into the use of the finite element method and artificial neural networks in the non-destructive analysis of metallic tubes

This work presents an investigation into the use of the finite element method and artificial neural networks in the identification of defects in industrial plants metallic tubes, due to the aggressive actions of the fluids contained by them, and/or atmospheric agents. The methodology used in this study consists of simulating a very large number of defects in a metallic tube, using the finite element method. Both variations in width and height of the defects are considered. Then, the obtained results are used to generate a set of vectors for the training of a perceptron multilayer artificial neural network. Finally, the obtained neural network is used to classify a group of new defects, simulated by the finite element method, but that do not belong to the original dataset. The reached results demonstrate the efficiency of the proposed approach, and encourage future works on this subject.

Hodgkin disease in adult and juvenile groups from two different geographic regions in Brazil: Characterization of clinicopathologic aspects and relationship with Epstein-Barr virus infection

We analyzed clinicopathologic data, immunophenotype, and Epstein-Barr virus (EBV) status in 96 cases of Hodgkin disease (HD) in juveniles (younger than 20 years) and adults (20 years or older) from 2 distinctive states in Brazil. We studied 34 juvenile (group 1) and 16 adult (group 2) cases from Ceara and 31 juvenile (group 3) and 15 adult (group 4) cases from São Paulo. Ceara has a socioeconomic profile similar to a developing country; São Paulo is in better economic condition. Mixed cellularity (MC) was the major histologic subtype among groups 1 (22 [65%]), 3 (21 [68%]), and 4 (7 [47%]); nodular sclerosis (NS) was more frequent in group 2 (8 [50%]). EBV infection was observed in 61 cases (64%), including the following (among others): group 1, MC, 22 (65%) and NS, 4 (12%); group 2, NS, 3 (19%) and MC, 2 (12%); group 3, MC, 16 (52%) and NS, 1 (3%); and group 4, MC, 7 (47%). There was predominance of EBV+ HD cases in group 1 compared with group 3. HD in Brazilian patients is highly associated with EBV infection, but geographic differences reflect histologic subtypes and age distribution.

Electroosmotic pumping in rectangular microchannels: A numerical treatment by the finite element method

In this work, the analysis of electroosmotic pumping mechanisms in microchannels is performed through the solution of Poisson-Boltzmann and Navier Stokes equations by the Finite Element Method. This approach is combined with a Newton-Raphson iterative scheme, allowing a full treatment of the non-linear Poisson-Boltzmann source term which is normally approximated by linearizations in other methods.

Isotopic characterization of the metabasites and amphibolites of the Acungui and Setuva Groups of the Ribeira Belt

Pb, Rb, Sr, Sm and Nd isotope analyses were carried out on amphibolitic rocks from Campo Largo (PR), Rio Branco do Sul (PR) and Adrianópolis (PR) and for the metabasite from Adrianópolis and Apiai (SP), all belonging to the Açungui and Setuva Groups, southern portion of the Ribeira Belt. These occurrences were chosen because each exhibits geochemical data indicative of a mantle source, having different signatures. Geochronologic determinations are available only for the Apiai metagabbro with Neoproterozoic ages of 617 ± 4 Ma (U/Pb in zircon) and 839 ± 85 Ma (Rb/Sr, whole rock). Age determinations by Sm/Nd mineral isochron using whole rock, plagioclase and pyroxene yield values of 885 ± 53 Ma for the Apiai metagabbro and 820 ± 84 Ma for the Adrianópolis metabasite. These results agree within error with the Rb/Sr isochron of 839 ± 85 Ma may possibly be interpreted as the time of extraction of the magma from the mantle, as suggested by positive εNd(850) values (+2,76) from an Adrianópolis sample. An εNd values versus 87Sr/86Sr diagram shows that each studied occurrence plots in a different position, following approximately the mantle array trend, the most primitive being the metabasite of Adrian-acopolis, near the MORB field, and the most enriched being the amphibolite from the same region, near the enriched mantle and or crustal contamination field. The distinct difference in isotopic signatures between the amphibolite and metabasite suggests derivation from different mantle sources, as supported by available geochemical data. Nevertheless, some of the samples show isotopic evidence of the action of metamorphism, crustal contamination and weathering.

Local dimension and finite time prediction in coupled map lattices

Forecasting, for obvious reasons, often become the most important goal to be achieved. For spatially extended systems (e.g. atmospheric system) where the local nonlinearities lead to the most unpredictable chaotic evolution, it is highly desirable to have a simple diagnostic tool to identify regions of predictable behaviour. In this paper, we discuss the use of the bred vector (BV) dimension, a recently introduced statistics, to identify the regimes where a finite time forecast is feasible. Using the tools from dynamical systems theory and Bayesian modelling, we show the finite time predictability in two-dimensional coupled map lattices in the regions of low BV dimension. © Indian Academy of Sciences.

Simulations of incompressible fluid flows by a least squares finite element method

In this work simulations of incompressible fluid flows have been done by a Least Squares Finite Element Method (LSFEM) using velocity-pressure-vorticity and velocity-pressure-stress formulations, named u-p-ω) and u-p-τ formulations respectively. These formulations are preferred because the resulting equations are partial differential equations of first order, which is convenient for implementation by LSFEM. The main purposes of this work are the numerical computation of laminar, transitional and turbulent fluid flows through the application of large eddy simulation (LES) methodology using the LSFEM. The Navier-Stokes equations in u-p-ω and u-p-τ formulations are filtered and the eddy viscosity model of Smagorinsky is used for modeling the sub-grid-scale stresses. Some benchmark problems are solved for validate the numerical code and the preliminary results are presented and compared with available results from the literature. Copyright © 2005 by ABCM.

Intercommissural width in 4 racial groups as a guide for the selection of maxillary anterior teeth in complete dentures

Purpose: To determine whether intercommissural width is a reliable guide for the selection of maxillary denture teeth width. Materials and Methods: Casts were made of 160 subjects from 4 different racial groups. Locations of intercommissural width landmarks (the corners of the mouth) were made on the subjects and transferred to the casts. The distances between the corners of the mouth and the distal of the canines were measured on the casts and compared. Results: A weak correlation was found between the distal of the canines and the distance between the corners of the mouth in the 4 racial groups. Conclusion: The use of the corners of the mouth for the selection of artificial teeth is generally inaccurate.

A general technique to embed non-uniform discontinuities into standard solid finite elements

A general technique to embed non-uniform displacement discontinuities into standard solid finite elements is presented. The technique is based on the decomposition of the kinematic fields into a component related to the deformation of the solid portion of the element and one related to the rigid-body motion due to a displacement discontinuity. This decomposition simplifies the incorporation of discontinuity interfaces and provides a suitable framework to account for non-uniform discontinuity modes. The present publication addresses two families of finite element formulations: displacement-based and stress hybrid finite element. © 2005 Elsevier Ltd. All rights reserved.

Calling sites and acoustic partitioning in species of the Hyla nana and rubicundula groups (Anura, Hylidae)

We analysed spatial and acoustic partitioning among four species of Hyla belonging to two species-groups: nana (H. nana and H. sanborni) and rubicundula (H. elianeae and H. jimi). Field activities were conducted at three permanent ponds, from 1998 through 2001. Four attributes of the calling sites were analysed: perch height, distance of the perch from the edge of the pond, type of perch (vegetation) and the individual's position on the perch. There was extensive overlap in the four calling-site variables analysed. However, we found spatial segregation did occur in calling site height and the distance of perches from pond edges. Bioacoustic analyses revealed behavioural differences among species in calling activity, both time of onset and peak calling in chorus. There was acoustic partitioning among species the fundamental frequency of the advertisement calls, principally as a function of the temporal structure (e.g. note duration, rate of note repetition, duration and rate of repetition of the calling pulses). We propose that differences in physical attributes of calling site and in characteristics of calls allow these species to exist in sympatry.

Nasal width as a guide for the selection of maxillary complete denture anterior teeth in four racial groups

Purpose: Selecting artificial teeth for edentulous patients is difficult when pre-extraction records are not available. Various guidelines have been suggested for determining the width of the maxillary anterior denture teeth. This study was undertaken to evaluate the use of the nasal width as a guide for the selection of proper width maxillary anterior denture teeth in four racial groups of the Brazilian population. Materials and Methods: One hundred and sixty subjects (40 Whites, 40 Mulattos, 40 Blacks, and 40 Asians) were selected. Using a sliding caliper, the nasal width and the intercanine distance were measured. The Pearson product-moment correlation coefficient was used to determine the relationship between the above measurements. A prediction was made of the percentage of subjects of the White, Mulatto, Black, and Asian populations in which the selection error due to the clinical application of the method of the nasal width would be within 0 to 2 mm, within 2 to 4 mm, and greater than 4 mm. Results: The four racial groups showed a weak correlation between the intercanine distance and the nasal width. In 39.7% of the White, 55.7% of the Mulatto, 81.9% of the Black, and 48.2% of the Asian populations, errors greater than 4 mm would be present with the use of the nasal width. Conclusions: The correlation found between the intercanine distance and the nasal width was not high enough to be used as a predictive factor. The relationship between natural tooth width and artificial tooth width as predicted by the nasal width showed that the nasal width method is not accurate for all the studied groups. Copyright © 2006 by The American College of Prosthodontists.

Finite element analysis of warpage in laminated aluminium alloy plates for machining of primary aeronautic parts

The aim of this paper consists in presenting a method of simulating the warpage in 7xxx series aluminium alloy plates. To perform this simulation finite element software MSC.Patran and MSC.Marc were used. Another result of this analysis will be the influence on material residual stresses induced on the raw material during the rolling process upon the warpage of primary aeronautic parts, fabricated through machining (milling) at Embraer. The method used to determinate the aluminium plate residual stress was Layer Removal Test. The numerical algorithm Modified Flavenot Method was used to convert layer removal and beam deflection in stress level. With such information about the level and profile of residual stresses become possible, during the step that anticipate the manufacturing to incorporate these values in the finite-element approach for modelling warpage parts. Based on that warpage parameter surely the products are manufactured with low relative vulnerability propitiating competitiveness and price. © 2007 American Institute of Physics.

Blade design and forming for fans using finite elements

The necessity of adapting the standardized fan models to conditions of higher temperature has emerged due to the growth of concerning referring to the consequences of the gas expelling after the Mont Blanc tunnel accident in Italy and France, where even though, with 100 fans in operation, 41 people died. However, since then, the defied solutions have pointed to aerodynamic disadvantages or have seemed nonappropriate in these conditions. The objective of this work is to present an alternative to the market standard fans considering a new technology in constructing blades. This new technology introduces the use of the stainless steel AISI 409 due to its good adaptation to temperatures higher than 400°C, particularly exposed to temperatures of gas exhaust from tunnels in fire situation. Furthermore, it presents a very good resistance to corrosion and posterior welding and pressing, due to its alloyed elements. The innovation is centered in the process of a deep drawing of metallic shells and posterior welding, in order to keep the ideal aerodynamic superficies for the fan ideal performance. On the other hand, the finite element method, through the elasto-plastic software COSMOS permitted the verification of the thickness and structural stability of the blade in relation to the aerodynamic efforts established in the project. In addition, it is not advisable the fabrication of blades with variable localized thickness not even, non-uniform ones, due to the verified concentration of tensions and the difficulties observed in the forming. In this way, this study recommends the construction of blades with uniform variations of thickness. © 2007 Springer.