Analysis of the near-intrinsic and extrinsic photocapacitance due to the EL2 level in boron implanted GaAs

A detailed analysis of the photocapacitance signal at the near‐band and extrinsic energetic ranges in Schottky barriers obtained on horizontal Bridgman GaAs wafers, which were implanted with boron at different doses and annealed at several temperatures, has been carried out by using the optical isothermal transient spectroscopy, OITS. The optical cross sections have been determined as well as the quenching efficiency of the EL2 level which has been found to be independent of the annealing temperature. Moreover, the quenching relaxation presents two significant features: (i) a strong increase of the quenching efficiency from 1.35 eV on and (ii) a diminution of the quenching transient amplitude in relation with that shown by the fundamental EL2 level. In order to explain this behavior, different cases are discussed assuming the presence of several energy levels, the existence of an optical recuperation, or the association of the EL2 trap with two levels located, respectively, at Ev+0.45 eV and Ec−0.75 eV. The theoretical simulation, taking into account these two last cases, is in agreement with the experimental photocapacitance data at low temperature, as well as at room temperature where the EL2 filling phototransient shows an anomalous behavior. Moreover, unlike the previous data reported for the EL2 electron optical cross section, the values found using our experimental technique are in agreement with the behavior deduced from the theoretical calculation. The utilization of the OITS method has also allowed the determination of another level, whose faster optical contribution is often added to that of the EL2 level when the DLOS or standard photocapacitance is used.

Analysis of leakage properties and guiding conditions of rib antiresonant reflecting optical waveguides

Power leakage properties and guiding conditions of rib antiresonant reflecting optical waveguides (rib-ARROW) have been theoretically and experimentally studied as a function of wavelength and polarization of the light for different geometrical and optical parameters that characterize the rib-ARROW structure. Obtained results show that rib-ARROWs can only be fabricated with low losses in a wavelength range when determined rib configurations are adopted. Furthermore, these waveguides exhibit a polarization sensitivity that largely depends on the core-substrate refractive index difference. Together with the experimental results, theoretical calculations from different modeling methods are also presented and discussed.

Diagnostic techniques applied in geostatistics for agricultural data analysis

The structural modeling of spatial dependence, using a geostatistical approach, is an indispensable tool to determine parameters that define this structure, applied on interpolation of values at unsampled points by kriging techniques. However, the estimation of parameters can be greatly affected by the presence of atypical observations in sampled data. The purpose of this study was to use diagnostic techniques in Gaussian spatial linear models in geostatistics to evaluate the sensitivity of maximum likelihood and restrict maximum likelihood estimators to small perturbations in these data. For this purpose, studies with simulated and experimental data were conducted. Results with simulated data showed that the diagnostic techniques were efficient to identify the perturbation in data. The results with real data indicated that atypical values among the sampled data may have a strong influence on thematic maps, thus changing the spatial dependence structure. The application of diagnostic techniques should be part of any geostatistical analysis, to ensure a better quality of the information from thematic maps.

Analysis of micro- and nano-structures of the corneal surface of Drosophila and its mutants by atomic force microscopy and optical diffraction.

Drosophila melanogaster is a model organism instrumental for numerous biological studies. The compound eye of this insect consists of some eight hundred individual ommatidia or facets, ca. 15 µm in cross-section. Each ommatidium contains eighteen cells including four cone cells secreting the lens material (cornea). High-resolution imaging of the cornea of different insects has demonstrated that each lens is covered by the nipple arrays--small outgrowths of ca. 200 nm in diameter. Here we for the first time utilize atomic force microscopy (AFM) to investigate nipple arrays of the Drosophila lens, achieving an unprecedented visualization of the architecture of these nanostructures. We find by Fourier analysis that the nipple arrays of Drosophila are disordered, and that the seemingly ordered appearance is a consequence of dense packing of the nipples. In contrast, Fourier analysis confirms the visibly ordered nature of the eye microstructures--the individual lenses. This is different in the frizzled mutants of Drosophila, where both Fourier analysis and optical imaging detect disorder in lens packing. AFM reveals intercalations of the lens material between individual lenses in frizzled mutants, providing explanation for this disorder. In contrast, nanostructures of the mutant lens show the same organization as in wild-type flies. Thus, frizzled mutants display abnormal organization of the corneal micro-, but not nano-structures. At the same time, nipples of the mutant flies are shorter than those of the wild-type. We also analyze corneal surface of glossy-appearing eyes overexpressing Wingless--the lipoprotein ligand of Frizzled receptors, and find the catastrophic aberration in nipple arrays, providing experimental evidence in favor of the major anti-reflective function of these insect eye nanostructures. The combination of the easily tractable genetic model organism and robust AFM analysis represents a novel methodology to analyze development and architecture of these surface formations.

Nedd4-2 ubiquitin ligase: a contributor to experimental neuropathic pain?

Background: Neuropathic pain is associated with altered expression of voltage-gated sodium channels (VGSCs) leading to peripheral nerve hyperexcitability. Interestingly, in cell expression systems, the ubiquitin ligase Nedd4-2 regulates the cell membrane density of the most abundant peripheral and pain-related VGSC, namely Nav1.7, and decreases its sodium current. Yet nothing is known about the involvement of Nedd4-2 in nociception and chronic pain. Therefore, the goal of this study is (i) to characterize Nedd4-2 and Nav1.7 expression in an experimental model of neuropathic pain (ii) to design by viral vector-mediated gene therapy an approach to depict the implication of Nedd4-2 in chronic pain. Methods: Western Blot and immunohistochemistry experiments detecting Nav1.7 and Nedd4-2 were performed in rodent DRGs 7 days after spared nerve injury (SNI). For the viral vector-mediated gene therapy, a recombinant Adeno-Associated Virus (rAAV2/6) was generated expressing the Nedd4-2 gene. Intrathecal injection of rAAV2/6 was followed 2 weeks after by the SNI surgery. Data are expressed in mean ± SEM, n = 4 in each condition. Results: Immunofluorescence on DRGs neurons reveals a decreased number of positive Nedd4-2 cells in the SNI model (27.0 ± 1.2%) versus sham group (43.4 ± 3.5%; p <0.005), as well as an increase in positive Nav1.7 cells in SNI (50.1 ± 2.9%) versus Sham (41.6 ± 1.8%; p <0.05). The change of Nedd4-2 expression was confirmed by western-blot analysis. In addition, we show that Nedd4-2 and Nav1.7 are largely expressed in overlapping cell populations, chiefly colocalizing with markers of small nociceptive neurons. Furthermore, we report that intrathecal injection of rAAV is able to counteract the reduction of Nedd4-2 expression in SNI animals. Conclusion: Our results indicate that Nedd4-2 is mainly expressed in nociceptors and downregulated after nerve injury. Moreover, our data suggest that the reduction of Nedd4-2, after nerve injury, may modulate Nav1.7 activity and contribute to hyperexcitability in neuropathic pain. A normal level of Nedd4-2 can be restored using a viral vector and we will further assess its functional effect on pain sensitivity.

Role of the inflammasome in murine experimental models of arthritis

Summary : The purpose of this study was to investigate the role of the inflammasome in human and experimental murine models (such as ΑΙΑ and K/BxN) of rheumatoid arthritis (RA)RA, affecting 1% of the population is the most frequent inflammatory disease characterized by synovial hyperplasia and cartilage and bone erosion, leading to joint destruction. In general, women are 3 times more affected by RA suggesting a role of estrogen in this disease. The inflammasome is a multiproteic complex triggering the activation of caspase-1 leading to the activation of IL-1 β, an important pro-inflammatory cytokine implicated in arthritis. The inflammasome has been implicated in several inflammatory diseases and particularly in gout. To highlight a possible role of the inflammasome in murine arthritis, we obtained ASC, caspase-1 and NALP3 +/+ and -/- littermate mice to perform ΑΙΑ and K/BxN arthritis. NALP3 -/- and caspase-1 -/- mice were as arthritic as wild type littermate mice in both ΑΙΑ and K/BxN models implicating that the NALP3 inflammasome is not involved in experimental arthritis. By contrast, ΑΙΑ severity was significantly diminished in ASC- deficient male and female mice, and in the K/BxN model, in ASC-deficient female mice. These results were supported by histological scoring and acute phase protein serum amyloid A (SAA) levels that were equivalent between NALP+/+ and NALP3-/- mice and diminished in ASC -/- mice. In ΑΙΑ and K/BxN murine experimental models, we observed a sexdependent phenotype. We studied the role of estradiol in both the ALA and the K/BxN models. Castrated female or male ASC -/- mice that received estradiol had a decreased arthritis severity. This implies a protective role of estrogen in the absence of ASC. In the ΑΙΑ model, proliferation assay were performed using splenocytes from mBSA- immunized ASC +/+ and -/- mice. The mBSA-induced proliferation was significantly lower in ASC-/- splenocytes. Moreover the CD3-specific proliferation of purified splenic Τ cells was significantly lower in ASC-/- cells. Finally, Τ cells from ASC-/- mice produced significantly decreased levels of IFN-gamma associated with increased levels of IL-10. These results imply a possible role of ASC in the TCR-signaling pathway and Τ cell cytokine production. In parallel the expression of the different inflammasome components were analyzed in biopsies from rheumatoid arthritis (RA) and osteoarthritis (OA) patiens. The expression of the 14 different NALPs, their effector protein ASC, and caspase-1 and -5 was readily measurable by RT-PCR in a similar proportion in RA and OA synovial samples, with the exception of NALP-5 and NALP-13, which weren't found in samples from either disease. The corresponding NALP1, -3, -12 and ASC proteins were expressed at similar levels in both OA and RA biopsies, as determined by immunohistochemistry and Western-blot analysis. By contrast, caspase-1 levels were significantly enhanced in RA synovial tissues compared to those from OA patients. NALP-1, -2, -3, -10, -12 and -14, as well as ASC, caspase-1, and -5 were detected in RNA from unstimulated and stimulated RA synoviocytes. In FLS, only ASC and caspase-1 were expressed at the protein level. NALP1, 3 and 12 were not detected. However, upon stimulation, no secreted IL-Ιβ was detectable in either RA or in OA synoviocytes culture medium. Résumé : Le but de ce projet était d'étudier le rôle de l'inflammasome dans des modèles expérimentaux d'arthrite tels que les modèles ΑΙΑ et K/BxN ainsi que dans la polyarthrite humaine (RA). La polyarthrite est une maladie inflammatoire très fréquente avec 1 % de la population affectée et touche 3 fois plus les femmes que les hommes, suggérant un rôle des hormones sexuelles dans cette pathologie. L'inflammasome est un complexe multiprotéique qui permet l'activation de la caspase-1, une cystéine protéase qui va ensuite cliver et activer rinterleukine-ΐβ (IL-Ιβ). L'inflammasome a été impliqué ces dernières années dans de nombreuses maladies inflammatoires notamment dans la goutte. Pour mettre en évidence un éventuel rôle de l'inflammasome dans l'arthrite expérimentale nous avons obtenu des souris déficientes pour certains des composants de l'inflammasome tels que ASC, NALP3 et caspase-1. Les souris NALP3 déficientes et caspase-1 déficientes sont aussi arthritiques que les souris wild type correspondantes que ce soit dans le modèle ΑΙΑ ou K/BxN. Par contre les souris mâles et femelles ASC-déficientes sont moins arthritiques que les souris +/+ correspondantes dans le modèle ΑΙΑ. Dans le modèle KRN, le même phénotype (diminution de la sévérité de l'arthrite) est observé uniquement chez les femelles ASC-/- Ce phénotype est corrélé avec l'histologie ainsi qu'avec le dosage du serum amyloid A (SAA) qui reflète l'inflammation systémique et qui est diminué chez les souris ASC-déficientes. Nous avons ensuite étudié le rôle de Γ estradiol (une des formes active des estrogènes) dans les modèles K/BxN et ΑΙΑ. Les souris castrées maies ou femelles déficientes pour ASC ayant reçu de l'estradiol ont une arthrite moins sévère ce qui implique que les estradiol ont un effet protecteur en l'absence de ASC. Dans le modèle ΑΙΑ, nous nous sommes aussi intéressés à la réponse immune. Des tests de prolifération ont été effectués sur des splénocytes en présence de mBSA (qui est l'antigène utilisé dans le modèle ΑΙΑ). Les splénocytes ASC -/- ont une proliferation qui est diminuée en présence de l'antigène. De plus la proliferation de cellules Τ spléniques purifiées en présence d'anti-CD3 est diminuée chez les cellules Τ ASC-/-. Ces résultats nous indiquent une éventuelle implication de ASC dans la signalisation par le récépteur des cellules T. En parallèle l'expression des différents composants de l'inflammasome a été analysée dans des biopsies de patients atteints de polyarthrite rhumatoide (RA) et d'arthrose (OA). L'expression des 14 différents NALPs, de l'adaptateur ASC, ainsi que des caspase-1 et -5 était similaires dans les échantillons RA et OA, à l'exception de NALP5 et 13 qui n'étaient pas détéctables. L'expression protéique de NALP1, 3, 12 et ASC effectuée par Western blot et immunohistochimie était similaire dans les biopsies RA et OA. Par contre la quantité de la caspase-1 mesurée par ELISA était augmentée de façon significative dans les extraits protéiques de biopsies RA. NALP-1, -2. -3, -10, -12, and -14 ainsi que ASC, caspase-1 et -5 étaient exprimés de façon similaire par les synoviocytes RA non stimulés et stimulés. Dans les synoviocytes seuls ASC et caspase-1 étaient détéctable au niveau protéique. NALP-1, -3 et -12 n'était pas détéctables. Cependant après stimulation il n'y avait d'IL-Ιβ sécrété que ce soit dans les surnageants de cultures de synoviocytes RA ou OA.

Kinetics of martensitic transitions in Cu-Al-Mn under thermal cycling: Analysis at multiple length scales

In this paper we study the evolution of the kinetic features of the martensitic transition in a Cu-Al-Mn single crystal under thermal cycling. The use of several experimental techniques including optical microscopy, calorimetry, and acoustic emission, has enabled us to perform an analysis at multiple scales. In particular, we have focused on the analysis of avalanche events (associated with the nucleation and growth of martensitic domains), which occur during the transition. There are significant differences between the kinetics at large and small length scales. On the one hand, at small length scales, small avalanche events tend to sum to give new larger events in subsequent loops. On the other hand, at large length scales the large domains tend to split into smaller ones on thermal cycling. We suggest that such different behavior is the necessary ingredient that leads the system to the final critical state corresponding to a power-law distribution of avalanches.

Comment on "Reappraisal of experimental values of third-order elastic constants of some cubic semiconductors and metals"

In a recent paper A. S. Johal and D. J. Dunstan [Phys. Rev. B 73, 024106 (2006)] have applied multivariate linear regression analysis to the published data of the change in ultrasonic velocity with applied stress. The aim is to obtain the best estimates for the third-order elastic constants in cubic materials. From such an analysis they conclude that uniaxial stress data on metals turns out to be nearly useless by itself. The purpose of this comment is to point out that by a proper analysis of uniaxial stress data it is possible to obtain reliable values of third-order elastic constants in cubic metals and alloys. Cu-based shape memory alloys are used as an illustrative example.

Kinematically complete analysis of the CLAS data on the proton structure Function F2 in a Regge-Dual model

The recently measured inclusive electron-proton cross section in the nucleon resonance region, performed with the CLAS detector at the Thomas Jefferson Laboratory, has provided new data for the nucleon structure function F2 with previously unavailable precision. In this paper we propose a description of these experimental data based on a Regge-dual model for F2. The basic inputs in the model are nonlinear complex Regge trajectories producing both isobar resonances and a smooth background. The model is tested against the experimental data, and the Q2 dependence of the moments is calculated. The fitted model for the structure function (inclusive cross section) is a limiting case of the more general scattering amplitude equally applicable to deeply virtual Compton scattering. The connection between the two is discussed.

Accuracy in the experimental calorimetric study of the crystallization kinetics and predicitve transformation diagrams: Application to a Ga-Te amorphous alloy

The uncertainties inherent to experimental differential scanning calorimetric data are evaluated. A new procedure is developed to perform the kinetic analysis of continuous heating calorimetric data when the heat capacity of the sample changes during the crystallization. The accuracy of isothermal calorimetric data is analyzed in terms of the peak-to-peak noise of the calorimetric signal and base line drift typical of differential scanning calorimetry equipment. Their influence in the evaluation of the kinetic parameters is discussed. An empirical construction of the time-temperature and temperature heating rate transformation diagrams, grounded on the kinetic parameters, is presented. The method is applied to the kinetic study of the primary crystallization of Te in an amorphous alloy of nominal composition Ga20Te80, obtained by rapid solidification.

Population differentiation and its consequences in the white campion "Silene latifolia" (Caryophyllaceae): a functional analysis

Summary In his theory On the Origin of Species by Means of Natural Selection (1859), Darwin describes evolution as a gradual change in population over time and that natural selection is a process that caused evolution. Because quantitative variation in species is partly influenced by several genes and thus heritable, association between levels of genetic variation at neutral markers and at quantitative traits and their partitioning within and among populations are important to study mechanisms that drive evolution in populations. Most studies addressing quantitative variation in plants focused on morphological and life history traits but not in traits affecting reproductive success. The aim of this thesis is to better understand how patterns of variation for neutral molecular markers and phenotypic traits drive the evolution of reproduction and defensive mechanisms in six European populations of Silene latifolia, a dioecious plant species. We found evidence for extremely high within and between population variation at six microsatellite loci and at most quantitative traits studied in plants grown under standardized conditions (morphology, life history and reproductive traits). Interestingly, there was clinal variation between age at first flowering and latitude. This pattern is likely due to natural selection since differentiation of this trait was high, heritable and probably higher than differentiation at neutral markers. Our study focused on sex specific selective pressures: mechanisms of intersexual coadaptation and defence mechanism against the seed predator Hadena bicruris. To address divergence at reproductive traits, we studied male and female population of origin effects and in particular pollen competitive ability on male post-pollination success in the study populations with within and between populations crosses. We crossed the same female plant with pollen from a male within the same population of origin and pollen from two males from two distinct populations, using a fixed tester male as a competitor. Additionally, we conducted control crosses with pollen from each male as a single donor. We analysed paternity success of each competitor with two microsatellite loci, seed set and offspring fitness. Male population of origin showed significant among-population variation for siring success at pollen competition. In vitro pollen germination rate showed heritable variation among populations and was positively correlated to siring success. Local or foreign pollen did not have a consistent advantage. Furthermore, female population of origin affected the outcome of pollen competition in some populations. There was no difference of seed set or offspring fitness in within/ between population crosses. This suggests that reproductive divergence may occur via pollen competition in Silene latifolia. The specialist seed predator Hadena bicruris may also induce divergence between populations. We tested potential constitutive and induced defence mechanisms against the specialist predator Hadena bicruris. Because fruit wall thickness is smaller in the invasive range (Northern America) were the moth is absent, this suggests that a thicker fruit wall is a potentially defensive trait against larval attack, and that relaxed selection in the absence of the seed predator has resulted in an evolutionary loss of this defence in the invasive range. Fruit wall thickness was different among three populations. Experimental exposure to moth eggs increased fruit abortion. Fruits built after attack on exposed plants did not have thicker fruit walls compared to fruits on non-exposed plants. Furthermore, fruits with thicker fruit walls were not less profitable, nor did they require longer handling time when exposed to larvae, suggesting no defensive role of fruit wall thickness. Our results show that there is high molecular and phenotypic variation in Silene latifolia and that traits potentially involved in reproductive success both for intra-specific (between sexes) and inter-specific interactions are heritable. Different selective forces may thus interact and cause differential evolution of geographically separated Silene latifolia populations in Europe, leading to the observed differentiation. Résumé Dans sa théorie de l'évolution, L'origine des espèces, ch. 4 (1859), Darwin décrit l'évolution comme un processus continu au cours du temps à l'intérieur de populations et que la sélection naturelle en est le moteur. La variation quantitative est en partie déterminée par plusieurs gènes, donc transmissible à la descendance. Associer le niveau de variation génétique à des marqueurs neutres au niveau de la variation à des traits quantitatifs, ainsi que la répartition à l'intérieur et entre les populations d'une espèce donnée de cette variation, sont importants dans la compréhension des forces évolutives. La plupart des études scientifiques sur la variation quantitative chez les plantes se sont intéressées à la morphologie et à la phénologie mais pas aux caractères impliqués dans le succès reproducteur. L'objectif de cette thèse est de mieux comprendre comment la répartition de la variation à des marqueurs neutres et des caractères quantitatifs influence l'évolution de la reproduction et des mécanismes de défense dans six populations Européennes de l'espèce dioïque Silene latifolia. Nous avons mis en évidence une grande diversité intra et inter-population à six loci microsatellites ainsi qu'à la plupart des caractères quantitatifs mesurés (morphologie, phénologie et traits reproducteurs) sur des plantes cultivées dans des conditions standardisées. Un résultat intéressant est la présence d'un cline latitudinal pour l'âge à la floraison. Ceci est probablement une conséquence de la sélection naturelle, puisque ce caractère est différencié entre les populations étudiées, héritable et que la différenciation de ce trait est supérieure à la différenciation des marqueurs neutres étudiés. Notre étude a ensuite porté plus précisément sur les pressions de sélection spécifiques aux sexes : la coadaptation entre les sexes et les mécanismes de défense contre l'insecte granivore Hadena bicruris. Afin d'évaluer la divergence sur les traits reproducteurs, nous avons étudié les effets des populations d'origine des mâles et des femelles et en particulier le succès reproducteur des mâles après pollinisation à l'aide de croisements inter et intra-population. Nous avons pollinisé la même femelle avec du pollen provenant d'un mâle de la même population ainsi qu'avec le pollen de deux mâles provenant de deux autres populations en situation de compétition avec un pollen provenant d'une population test. Des croisements contrôle ont été réalisés avec les mêmes mâles en pollinisation pure. Nous avons évalué le succès reproducteur de chaque mâle à l'aide d'analyses de paternité ainsi que la production de graines et la fitness de la descendance. L'origine du mâle avait un effet sur la paternité. Le taux de croissance in vitro du pollen est un caractère héritable et a eu un effet positif sur le succès reproducteur. De plus, l'origine de la femelle avait un effet sur le succès des mâles en compétition dans certaines populations. Nos résultats suggèrent qu'une divergence reproductive chez Silene latifolia pourrait apparaître suite à la compétition pollinique. Nous avons ensuite testé des mécanismes potentiels de défense constitutive et induite contre l'herbivore spécialiste Hadena bicruris, un papillon nocturne qui pourrait aussi jouer un rôle dans la différenciation des populations. L'épaisseur des fruits étant plus faible dans les régions où la plante est invasive (Amérique du Nord) et où l'insecte est absent, ce trait pourrait jouer un rôle défensif. Une pression de sélection plus faible causée par l'absence de l'herbivore aurait abouti à une perte de cette défense dans ces régions. Nous avons montré que l'épaisseur du fruit est variable selon les populations. L'infestation artificielle de fruit par l'insecte induit l'abscission sélective des fruits. Les fruits produits après une infestation n'étaient pas plus épais que les fruits issus de plantes non infestées. De plus, les fruits épais n'étaient pas moins nutritifs et ne causaient pas de perte de temps pour la prédation pour les larves, ce qui suggère que l'épaisseur des fruits ne joue pas un rôle défensif. Nos résultats montrent que plusieurs pressions de sélection interviennent et interagissent dans l'évolution de populations distantes, provoquant la divergence des populations Européennes de l'espèce Silene latifolia.

Cost-effective experimental design to support modeling of concentration-response functions

Modeling concentration-response function became extremely popular in ecotoxicology during the last decade. Indeed, modeling allows determining the total response pattern of a given substance. However, reliable modeling is consuming in term of data, which is in contradiction with the current trend in ecotoxicology, which aims to reduce, for cost and ethical reasons, the number of data produced during an experiment. It is therefore crucial to determine experimental design in a cost-effective manner. In this paper, we propose to use the theory of locally D-optimal designs to determine the set of concentrations to be tested so that the parameters of the concentration-response function can be estimated with high precision. We illustrated this approach by determining the locally D-optimal designs to estimate the toxicity of the herbicide dinoseb on daphnids and algae. The results show that the number of concentrations to be tested is often equal to the number of parameters and often related to the their meaning, i.e. they are located close to the parameters. Furthermore, the results show that the locally D-optimal design often has the minimal number of support points and is not much sensitive to small changes in nominal values of the parameters. In order to reduce the experimental cost and the use of test organisms, especially in case of long-term studies, reliable nominal values may therefore be fixed based on prior knowledge and literature research instead of on preliminary experiments

Interlaboratory comparison of size measurements on nanoparticles using nanoparticle tracking analysis (NTA)

One of the key challenges in the field of nanoparticle (NP) analysis is in producing reliable and reproducible characterisation data for nanomaterials. This study looks at the reproducibility using a relatively new, but rapidly adopted, technique, Nanoparticle Tracking Analysis (NTA) on a range of particle sizes and materials in several different media. It describes the protocol development and presents both the data and analysis of results obtained from 12 laboratories, mostly based in Europe, who are primarily QualityNano members. QualityNano is an EU FP7 funded Research Infrastructure that integrates 28 European analytical and experimental facilities in nanotechnology, medicine and natural sciences with the goal of developing and implementing best practice and quality in all aspects of nanosafety assessment. This study looks at both the development of the protocol and how this leads to highly reproducible results amongst participants. In this study, the parameter being measured is the modal particle size.

Analysis of the role of mobility-lifetime products in the performance of amorphous silicon p-i-n solar cells

An analytical model of an amorphous silicon p-i-n solar cell is presented to describe its photovoltaic behavior under short-circuit conditions. It has been developed from the analysis of numerical simulation results. These results reproduce the experimental illumination dependence of short-circuit resistance, which is the reciprocal slope of the I(V) curve at the short-circuit point. The recombination rate profiles show that recombination in the regions of charged defects near the p-i and i-n interfaces should not be overlooked. Based on the interpretation of the numerical solutions, we deduce analytical expressions for the recombination current and short-circuit resistance. These expressions are given as a function of an effective ¿¿ product, which depends on the intensity of illumination. We also study the effect of surface recombination with simple expressions that describe its influence on current loss and short-circuit resistance.

In situ fast ellipsometric analysis of repetitive surface phenomena

We present an ellipsometric technique and ellipsometric analysis of repetitive phenomena, based on the experimental arrangement of conventional phase modulated ellipsometers (PME) c onceived to study fast surface phenomena in repetitive processes such as periodic and triggered experiments. Phase modulated ellipsometry is a highly sensitive surface characterization technique that is widely used in the real-time study of several processes such as thin film deposition and etching. However, fast transient phenomena cannot be analyzed with this technique because precision requirements limit the data acquisition rate to about 25 Hz. The presented new ellipsometric method allows the study of fast transient phenomena in repetitive processes with a time resolution that is mainly limited by the data acquisition system. As an example, we apply this new method to the study of surface changes during plasma enhanced chemical vapor deposition of amorphous silicon in a modulated radio frequency discharge of SiH4. This study has revealed the evolution of the optical parameters of the film on the millisecond scale during the plasma on and off periods. The presented ellipsometric method extends the capabilities of PME arrangements and permits the analysis of fast surface phenomena that conventional PME cannot achieve.