Adolescent Pregnancy Prevention in San Jose, Costa Rica : Assessment of an Educational Intervention

This thesis explores adolescent pregnancy in San Jose, Costa Rica and examines a school-based pregnancy prevention intervention. The relationships between school, gender and risk of adolescent pregnancy are also analyzed, and recommendations are made for effective pregnancy prevention programming. The Purral region of Guadalupe on the outskirts of San Jose, Costa Rica, suffers a higher rate of adolescent pregnancy compared to the rest of the country. In response to this problem, the International Health Central American Institute (IHCAI) implemented a sexual health education program in two local secondary schools in 2006. Very little information about the program is available. It is known that the program was initially evaluated through assessments of the participants’ knowledge before and after the educational sessions. There was no evaluation of the youth attitudes or behaviors, adolescent pregnancies, or long-term impact. The author worked with IHCAI in San Jose, Costa Rica to perform an assessment of the longer term effects of this sexual health education program. They developed a questionnaire to evaluate the knowledge, attitudes, and behaviors surrounding sexual health of youth in the Purral community. Researchers at IHCAI later used this survey to collect data from adolescents who had participated in the educational intervention and those who had not. This thesis analyzes the data collected by IHCAI to assess the effectiveness of the - 2 - educational intervention and the influence of other factors on the knowledge, attitudes, and behaviors of adolescents in the Purral region. The thesis begins with an overview of adolescent pregnancy, Costa Rica and the Purral region, and a description of the education intervention implemented by IHCAI. The research goal, logic model, and methods are then described. The results are reported, and the thesis then concludes with discussion of the results as well as study limitations and recommendations for future research and intervention. This thesis will be used to guide IHCAI’s continuation and expansion of adolescent pregnancy prevention programming.

Use of cognitive interviewing in the development of a Spanish language genetic knowledge instrument

Study purpose. Genetic advances are significantly impacting healthcare, yet recent studies of ethnic group participation in genetic services demonstrate low utilization rates by Latinos. Limited genetic knowledge is a major barrier. The purpose of this study was to field test items in a Spanish-language instrument that will be used to measure genetic knowledge relevant to type 2 diabetes among members of the ethnically heterogeneous U.S. Latino community. Accurate genetic knowledge measurement can provide the foundation for interventions to enhance genetic service utilization. ^ Design. Three waves of cognitive interviews were conducted in Spanish to field test 44 instrument items Thirty-six Latinos, with 12 persons representative of Mexican, Central and South American, and Cuban heritage participated, including 7 males and 29 females between 22 and 60 years of age; 17 participants had 12 years or less of education. ^ Methods. Text narratives from transcriptions of audiotaped interviews were qualitatively analyzed using a coding strategy to indicate potential sources of response error. Through an iterative process of instrument refinement, codes that emerged from the data were used to guide item revisions at the conclusion of each phase; revised items were examined in subsequent interview waves. ^ Results. Inter-cultural and cross-cultural themes associated with difficulties in interpretation and grammatical structuring of items were identified; difficulties associated with comprehension reflected variations in educational level. Of the original 44 items, 32 were retained, 89% of which were revised. Six additional items reflective of cultural knowledge were constructed, resulting in a 38-item instrument. ^ Conclusions. Use of cognitive interviewing provided a valuable tool for detecting both potential sources of response error and cultural variations in these sources. Analysis of interview data guided successive instrument revisions leading to improved item interpretability and comprehension. Although testing in a larger sample will be essential to test validity and reliability, the outcome of field testing suggests initial content validity of a Spanish-language instrument to measure genetic knowledge relative to type 2 diabetes. ^ Keywords. Latinos, genetic knowledge, instrument development, cognitive interviewing ^

An interactive intervention to impact adherence to antiretroviral treatment among treatment-naive HIV-infected adults in Thailand: A pilot randomized controlled study

Background. Consistent adherence to antiretroviral treatment is necessary for a treatment success. Improving and maintaining adherence rate >95% are challenging for health care professionals. This pilot randomized controlled study aimed to evaluate the impact of the interactive intervention on adherence to GPO-VIR, to describe the feasibility of the interactive intervention in Thailand, and to illustrate the adherence self-efficacy concept among HIV treatment-naïve patients in Thailand who were starting antiretroviral treatment. ^ Methods. The study took place at three HIV clinics located in Phayao, Thailand. Twenty-three patients were randomly assigned into the experimental (n=11) and the control groups (n=12). Each participant in the experimental group and a significant person to the patient received 5 educational sessions with a nurse at the clinics and at their homes. They also received 3 follow-up evaluations during the 6-month period of the study. The participants in the control group received the standard of care provided by HIV clinical personnel plus three follow-up evaluations at the clinic. ^ Results. Seventeen patients (7 in the experimental and 10 in the control group) completed the study. The 4-day recall on the Thai ACTG Adherence Scale demonstrated adherence rate >95% for most participants from both groups. After the first measurement, no experimental group patients reporting missing ART, while one control group participant continuously skipped ART. Participants from both groups had significantly increased CD4 cell counts after the study (F(1, 15) = 29.30, p = .000), but no differences were found between two groups (F(1, 15) = .001, p = .98). Examination of the intervention showed limitations and possibilities to implement it in Thailand. Qualitative data demonstrated self-efficacy expectations, resignation and acceptance as related concepts to improve adherence outcomes. ^ Conclusions. This interactive intervention, after appropriate modifications, is feasible to apply for Thai HIV-treatment naïve patients. Because of limitations the study could not demonstrate whether the interactive intervention improved adherence to ART among HIV-treatment naïve in Thailand. A longitudinal study in a larger sample would be required to test the impact of the intervention. ^ Keyword: antiretroviral treatment, adherence, treatment-naïve, Thailand, randomized controlled study ^

SOCIO-ENVIRONMENTAL FACTORS ASSOCIATED WITH THE DISTRIBUTION OF DRACUNCULUS MEDINENSIS (GUINEA WORM DISEASE) AND SUGGESTED METHODS FOR CONTROL, IBARAPA, NIGERIA, 1982 (AFRICA)

A population-based cross-sectional survey of socio-environmental factors associated with the prevalence of Dracunculus medinensis (guinea worm disease) was conducted in Idere, a rural agricultural community in Ibarapa, Oyo state, Nigeria, during 1982.^ The epidemiologic data were collected by household interview of all 501 households. The environmental data were collected by analysis of water samples collected from all domestic water sources and rainfall records.^ The specific objectives of this research were to: (a) Describe the prevalence of guinea worm disease in Idere during 1982 by age, sex, area of residence, drinking water source, religion and weekly amount of money spent by the household to collect potable drinking water. (b) Compare the characteristics of cases with non-cases of guinea worm in order to identify factors associated with high risk of infection. (c) Investigate domestic water sources for the distribution of Cyclops. (d) Determine the extent of potable water shortage with a view to identifying factors responsible for such shortage in the community. (e) Describe the effects of guinea worm on school attendance during 1980/1982 school years by class and location of school from piped water supply.^ The findings of this research indicate that during 1982, 31.8 percent of Idere's 6,527 residents experienced guinea worm infection, with higher prevalence of infection recorded in males in their most productive years and females in their teenage years. The role of sex and age to risk of higher infection rate was explained in the context of water related exposure and water intake due to dehydration from physical occupational actitives of subgroups.^ Potable water available to residents was considerably below the minimum recommended by WHO for tropical climates, with sixty-eight percent of water needs of the residents coming from unprotected surface water which harbour Cyclops, the obligatory intermediate host of Dracunculus medinensis. An association was found between periods of relative high density of Cyclops in domestic water and rainfall.^ Impact of guinea worm infection on educational activities was considerable and its implications were discussed, including the implications of the research findings in relation to control of guinea worm disease in Ibarapa. ^

A systematic review of the methods used to assess race and racial disparities in uterine fibroid research

Context: Black women are reported to have a higher prevalence of uterine fibroids, and a threefold higher incidence rate and relative risk for clinical uterine fibroid development as compared to women of other races. Uterine fibroid research has reported that black women experience greater uterine fibroid morbidity and disproportionate uterine fibroid disease burden. With increased interest in understanding uterine fibroid development, and race being a critical component of uterine fibroid assessment, it is imperative that the methods used to determine the race of research participants is defined and the operational definition of the use of race as a variable is reported for methodological guidance, and to enable the research community to compare statistical data and replicate studies. ^ Objectives: To systematically review and evaluate the methods used to assess race and racial disparities in uterine fibroid research. ^ Data Sources: Databases searched for this review include: OVID Medline, NML PubMed, Ebscohost Cumulative Index to Nursing and Allied Health Plus with Full Text, and Elsevier Scopus. ^ Review Methods: Articles published in English were retrieved from data sources between January 2011 and March 2011. Broad search terms, uterine fibroids and race, were employed to retrieve a comprehensive list of citations for review screening. The initial database yield included 947 articles, after duplicate extraction 485 articles remained. In addition, 771 bibliographic citations were reviewed to identify additional articles not found through the primary database search, of which 17 new articles were included. In the first screening, 502 titles and abstracts were screened against eligibility questions to determine citations of exclusion and to retrieve full text articles for review. In the second screening, 197 full texted articles were screened against eligibility questions to determine whether or not they met full inclusion/exclusion criteria. ^ Results: 100 articles met inclusion criteria and were used in the results of this systematic review. The evidence suggested that black women have a higher prevalence of uterine fibroids when compared to white women. None of the 14 studies reporting data on prevalence reported an operational definition or conceptual framework for the use of race. There were a limited number of studies reporting on the prevalence of risk factors among racial subgroups. Of the 3 studies, 2 studies reported prevalence of risk factors lower for black women than other races, which was contrary to hypothesis. And, of the three studies reporting on prevalence of risk factors among racial subgroups, none of them reported a conceptual framework for the use of race. ^ Conclusion: In the 100 uterine fibroid studies included in this review over half, 66%, reported a specific objective to assess and recruit study participants based upon their race and/or ethnicity, but most, 51%, failed to report a method of determining the actual race of the participants, and far fewer, 4% (only four South American studies), reported a conceptual framework and/or operational definition of race as a variable. However, most, 95%, of all studies reported race-based health outcomes. The inadequate methodological guidance on the use of race in uterine fibroid studies, purporting to assess race and racial disparities, may be a primary reason that uterine fibroid research continues to report racial disparities, but fails to understand the high prevalence and increased exposures among African-American women. A standardized method of assessing race throughout uterine fibroid research would appear to be helpful in elucidating what race is actually measuring, and the risk of exposures for that measurement. ^

Making genetic biodiversity measurable : a review of statistical multivariate methods to study variability at gene level

Measures of agro-ecosystems genetic variability are essential to sustain scientific-based actions and policies tending to protect the ecosystem services they provide. To build the genetic variability datum it is necessary to deal with a large number and different types of variables. Molecular marker data is highly dimensional by nature, and frequently additional types of information are obtained, as morphological and physiological traits. This way, genetic variability studies are usually associated with the measurement of several traits on each entity. Multivariate methods are aimed at finding proximities between entities characterized by multiple traits by summarizing information in few synthetic variables. In this work we discuss and illustrate several multivariate methods used for different purposes to build the datum of genetic variability. We include methods applied in studies for exploring the spatial structure of genetic variability and the association of genetic data to other sources of information. Multivariate techniques allow the pursuit of the genetic variability datum, as a unifying notion that merges concepts of type, abundance and distribution of variability at gene level.

Space-time Reconstruction of Oceanic Sea States via Variational Stereo Methods

We present a remote sensing observational method for the measurement of the spatio-temporal dynamics of ocean waves. Variational techniques are used to recover a coherent space-time reconstruction of oceanic sea states given stereo video imagery. The stereoscopic reconstruction problem is expressed in a variational optimization framework. There, we design an energy functional whose minimizer is the desired temporal sequence of wave heights. The functional combines photometric observations as well as spatial and temporal regularizers. A nested iterative scheme is devised to numerically solve, via 3-D multigrid methods, the system of partial differential equations resulting from the optimality condition of the energy functional. The output of our method is the coherent, simultaneous estimation of the wave surface height and radiance at multiple snapshots. We demonstrate our algorithm on real data collected off-shore. Statistical and spectral analysis are performed. Comparison with respect to an existing sequential method is analyzed.

Contribution to the quality improvement of the antenna measurement using post-processing techniques = Contribución a la mejora de la calidad de medida de antena usando técnicas de post-procesado

One important task in the design of an antenna is to carry out an analysis to find out the characteristics of the antenna that best fulfills the specifications fixed by the application. After that, a prototype is manufactured and the next stage in design process is to check if the radiation pattern differs from the designed one. Besides the radiation pattern, other radiation parameters like directivity, gain, impedance, beamwidth, efficiency, polarization, etc. must be also evaluated. For this purpose, accurate antenna measurement techniques are needed in order to know exactly the actual electromagnetic behavior of the antenna under test. Due to this fact, most of the measurements are performed in anechoic chambers, which are closed areas, normally shielded, covered by electromagnetic absorbing material, that simulate free space propagation conditions, due to the absorption of the radiation absorbing material. Moreover, these facilities can be employed independently of the weather conditions and allow measurements free from interferences. Despite all the advantages of the anechoic chambers, the results obtained both from far-field measurements and near-field measurements are inevitably affected by errors. Thus, the main objective of this Thesis is to propose algorithms to improve the quality of the results obtained in antenna measurements by using post-processing techniques and without requiring additional measurements. First, a deep revision work of the state of the art has been made in order to give a general vision of the possibilities to characterize or to reduce the effects of errors in antenna measurements. Later, new methods to reduce the unwanted effects of four of the most commons errors in antenna measurements are described and theoretical and numerically validated. The basis of all them is the same, to perform a transformation from the measurement surface to another domain where there is enough information to easily remove the contribution of the errors. The four errors analyzed are noise, reflections, truncation errors and leakage and the tools used to suppress them are mainly source reconstruction techniques, spatial and modal filtering and iterative algorithms to extrapolate functions. Therefore, the main idea of all the methods is to modify the classical near-field-to-far-field transformations by including additional steps with which errors can be greatly suppressed. Moreover, the proposed methods are not computationally complex and, because they are applied in post-processing, additional measurements are not required. The noise is the most widely studied error in this Thesis, proposing a total of three alternatives to filter out an important noise contribution before obtaining the far-field pattern. The first one is based on a modal filtering. The second alternative uses a source reconstruction technique to obtain the extreme near-field where it is possible to apply a spatial filtering. The last one is to back-propagate the measured field to a surface with the same geometry than the measurement surface but closer to the AUT and then to apply also a spatial filtering. All the alternatives are analyzed in the three most common near-field systems, including comprehensive noise statistical analyses in order to deduce the signal-to-noise ratio improvement achieved in each case. The method to suppress reflections in antenna measurements is also based on a source reconstruction technique and the main idea is to reconstruct the field over a surface larger than the antenna aperture in order to be able to identify and later suppress the virtual sources related to the reflective waves. The truncation error presents in the results obtained from planar, cylindrical and partial spherical near-field measurements is the third error analyzed in this Thesis. The method to reduce this error is based on an iterative algorithm to extrapolate the reliable region of the far-field pattern from the knowledge of the field distribution on the AUT plane. The proper termination point of this iterative algorithm as well as other critical aspects of the method are also studied. The last part of this work is dedicated to the detection and suppression of the two most common leakage sources in antenna measurements. A first method tries to estimate the leakage bias constant added by the receiver’s quadrature detector to every near-field data and then suppress its effect on the far-field pattern. The second method can be divided into two parts; the first one to find the position of the faulty component that radiates or receives unwanted radiation, making easier its identification within the measurement environment and its later substitution; and the second part of this method is able to computationally remove the leakage effect without requiring the substitution of the faulty component. Resumen Una tarea importante en el diseño de una antena es llevar a cabo un análisis para averiguar las características de la antena que mejor cumple las especificaciones fijadas por la aplicación. Después de esto, se fabrica un prototipo de la antena y el siguiente paso en el proceso de diseño es comprobar si el patrón de radiación difiere del diseñado. Además del patrón de radiación, otros parámetros de radiación como la directividad, la ganancia, impedancia, ancho de haz, eficiencia, polarización, etc. deben ser también evaluados. Para lograr este propósito, se necesitan técnicas de medida de antenas muy precisas con el fin de saber exactamente el comportamiento electromagnético real de la antena bajo prueba. Debido a esto, la mayoría de las medidas se realizan en cámaras anecoicas, que son áreas cerradas, normalmente revestidas, cubiertas con material absorbente electromagnético. Además, estas instalaciones se pueden emplear independientemente de las condiciones climatológicas y permiten realizar medidas libres de interferencias. A pesar de todas las ventajas de las cámaras anecoicas, los resultados obtenidos tanto en medidas en campo lejano como en medidas en campo próximo están inevitablemente afectados por errores. Así, el principal objetivo de esta Tesis es proponer algoritmos para mejorar la calidad de los resultados obtenidos en medida de antenas mediante el uso de técnicas de post-procesado. Primeramente, se ha realizado un profundo trabajo de revisión del estado del arte con el fin de dar una visión general de las posibilidades para caracterizar o reducir los efectos de errores en medida de antenas. Después, se han descrito y validado tanto teórica como numéricamente nuevos métodos para reducir el efecto indeseado de cuatro de los errores más comunes en medida de antenas. La base de todos ellos es la misma, realizar una transformación de la superficie de medida a otro dominio donde hay suficiente información para eliminar fácilmente la contribución de los errores. Los cuatro errores analizados son ruido, reflexiones, errores de truncamiento y leakage y las herramientas usadas para suprimirlos son principalmente técnicas de reconstrucción de fuentes, filtrado espacial y modal y algoritmos iterativos para extrapolar funciones. Por lo tanto, la principal idea de todos los métodos es modificar las transformaciones clásicas de campo cercano a campo lejano incluyendo pasos adicionales con los que los errores pueden ser enormemente suprimidos. Además, los métodos propuestos no son computacionalmente complejos y dado que se aplican en post-procesado, no se necesitan medidas adicionales. El ruido es el error más ampliamente estudiado en esta Tesis, proponiéndose un total de tres alternativas para filtrar una importante contribución de ruido antes de obtener el patrón de campo lejano. La primera está basada en un filtrado modal. La segunda alternativa usa una técnica de reconstrucción de fuentes para obtener el campo sobre el plano de la antena donde es posible aplicar un filtrado espacial. La última es propagar el campo medido a una superficie con la misma geometría que la superficie de medida pero más próxima a la antena y luego aplicar también un filtrado espacial. Todas las alternativas han sido analizadas en los sistemas de campo próximos más comunes, incluyendo detallados análisis estadísticos del ruido con el fin de deducir la mejora de la relación señal a ruido lograda en cada caso. El método para suprimir reflexiones en medida de antenas está también basado en una técnica de reconstrucción de fuentes y la principal idea es reconstruir el campo sobre una superficie mayor que la apertura de la antena con el fin de ser capaces de identificar y después suprimir fuentes virtuales relacionadas con las ondas reflejadas. El error de truncamiento que aparece en los resultados obtenidos a partir de medidas en un plano, cilindro o en la porción de una esfera es el tercer error analizado en esta Tesis. El método para reducir este error está basado en un algoritmo iterativo para extrapolar la región fiable del patrón de campo lejano a partir de información de la distribución del campo sobre el plano de la antena. Además, se ha estudiado el punto apropiado de terminación de este algoritmo iterativo así como otros aspectos críticos del método. La última parte de este trabajo está dedicado a la detección y supresión de dos de las fuentes de leakage más comunes en medida de antenas. El primer método intenta realizar una estimación de la constante de fuga del leakage añadido por el detector en cuadratura del receptor a todos los datos en campo próximo y después suprimir su efecto en el patrón de campo lejano. El segundo método se puede dividir en dos partes; la primera de ellas para encontrar la posición de elementos defectuosos que radian o reciben radiación indeseada, haciendo más fácil su identificación dentro del entorno de medida y su posterior substitución. La segunda parte del método es capaz de eliminar computacionalmente el efector del leakage sin necesidad de la substitución del elemento defectuoso.

Using quantitative descriptive analysis and temporal dominance of sensations analysis as complementary methods for profiling commercial blackcurrant squashes

Quantitative descriptive analysis (QDA) is used to describe the nature and the intensity of sensory properties from a single evaluation of a product, whereas temporal dominance of sensation (TDS) is primarily used to identify dominant sensory properties over time. Previous studies with TDS have focused on model systems, but this is the first study to use a sequential approach, i.e. QDA then TDS in measuring sensory properties of a commercial product category, using the same set of trained assessors (n = 11). The main objectives of this study were to: (1) investigate the benefits of using a sequential approach of QDA and TDS and (2) to explore the impact of the sample composition on taste and flavour perceptions in blackcurrant squashes. The present study has proposed an alternative way of determining the choice of attributes for TDS measurement based on data obtained from previous QDA studies, where available. Both methods indicated that the flavour profile was primarily influenced by the level of dilution and complexity of sample composition combined with blackcurrant juice content. In addition, artificial sweeteners were found to modify the quality of sweetness and could also contribute to bitter notes. Using QDA and TDS in tandem was shown to be more beneficial than each just on its own enabling a more complete sensory profile of the products.

Text categorization methods for automatic estimation of verbal intelligence

In this paper we investigate whether conventional text categorization methods may suffice to infer different verbal intelligence levels. This research goal relies on the hypothesis that the vocabulary that speakers make use of reflects their verbal intelligence levels. Automatic verbal intelligence estimation of users in a spoken language dialog system may be useful when defining an optimal dialog strategy by improving its adaptation capabilities. The work is based on a corpus containing descriptions (i.e. monologs) of a short film by test persons yielding different educational backgrounds and the verbal intelligence scores of the speakers. First, a one-way analysis of variance was performed to compare the monologs with the film transcription and to demonstrate that there are differences in the vocabulary used by the test persons yielding different verbal intelligence levels. Then, for the classification task, the monologs were represented as feature vectors using the classical TF–IDF weighting scheme. The Naive Bayes, k-nearest neighbors and Rocchio classifiers were tested. In this paper we describe and compare these classification approaches, define the optimal classification parameters and discuss the classification results obtained.

Methods for noise reduction in far-field patterns obtained from cylindrical near-field antenna measurements

Two different methods to reduce the noise power in the far-field pattern of an antenna as measured in cylindrical near-field (CNF) are proposed. Both methods are based on the same principle: the data recorded in the CNF measurement, assumed to be corrupted by white Gaussian and space-stationary noise, are transformed into a new domain where it is possible to filter out a portion of noise. Those filtered data are then used to calculate a far-field pattern with less noise power than that one obtained from the measured data without applying any filtering. Statistical analyses are carried out to deduce the expressions of the signal-to-noise ratio improvement achieved with each method. Although the idea of the two alternatives is the same, there are important differences between them. The first one applies a modal filtering, requires an oversampling and improves the far-field pattern in all directions. The second method employs a spatial filtering on the antenna plane, does not require oversampling and the far-field pattern is only improved in the forward hemisphere. Several examples are presented using both simulated and measured near-field data to verify the effectiveness of the methods.

"Innovatio educativa tertio millennio": 12 years evoluting from learning from learning to teaching in courses on educational innovation and collaboration with the UNESCO chair of mining and industrial heritage

Twelve years ago a group of teachers began to work in educational innovation. In 2002 we received an award for educational innovation, undergoing several stages. Recently, we have decided to focus on being teachers of educational innovation. We create a web scheduled in Joomla offering various services, among which we emphasize teaching courses of educational innovation. The “Instituto de Ciencias de la Educacion” in “Universidad Politécnica de Madrid” has recently incorporated two of these courses, which has been highly praised. These courses will be reissued in new calls, and we are going to offer them to more Universities. We are in contact with several institutions, radio programs, the UNESCO Chair of Mining and Industrial Heritage, and we are working with them in the creation of heritage courses using methods that we have developed.

Computational Methods for Identification of Vibrating Structures

System identification deals with the problem of building mathematical models of dynamical systems based on observed data from the system" [1]. In the context of civil engineering, the system refers to a large scale structure such as a building, bridge, or an offshore structure, and identification mostly involves the determination of modal parameters (the natural frequencies, damping ratios, and mode shapes). This paper presents some modal identification results obtained using a state-of-the-art time domain system identification method (data-driven stochastic subspace algorithms [2]) applied to the output-only data measured in a steel arch bridge. First, a three dimensional finite element model was developed for the numerical analysis of the structure using ANSYS. Modal analysis was carried out and modal parameters were extracted in the frequency range of interest, 0-10 Hz. The results obtained from the finite element modal analysis were used to determine the location of the sensors. After that, ambient vibration tests were conducted during April 23-24, 2009. The response of the structure was measured using eight accelerometers. Two stations of three sensors were formed (triaxial stations). These sensors were held stationary for reference during the test. The two remaining sensors were placed at the different measurement points along the bridge deck, in which only vertical and transversal measurements were conducted (biaxial stations). Point estimate and interval estimate have been carried out in the state space model using these ambient vibration measurements. In the case of parametric models (like state space), the dynamic behaviour of a system is described using mathematical models. Then, mathematical relationships can be established between modal parameters and estimated point parameters (thus, it is common to use experimental modal analysis as a synonym for system identification). Stable modal parameters are found using a stabilization diagram. Furthermore, this paper proposes a method for assessing the precision of estimates of the parameters of state-space models (confidence interval). This approach employs the nonparametric bootstrap procedure [3] and is applied to subspace parameter estimation algorithm. Using bootstrap results, a plot similar to a stabilization diagram is developed. These graphics differentiate system modes from spurious noise modes for a given order system. Additionally, using the modal assurance criterion, the experimental modes obtained have been compared with those evaluated from a finite element analysis. A quite good agreement between numerical and experimental results is observed.

Non-destructive measurement techniques for taper equation development: a study case in the Spanish Northern Iberian Range

In recent years, the technology for measuring the diameter and height of standing trees has improved significantly. These enhancements allow estimation of the volume of standing trees using stem taper equations, which traditionally have been constructed with data from felled trees, in an accurate and economically feasible way. A nondestructive method was evaluated with data from 38 pines and was validated with data from another 38 pines, both in the Northern Iberian Range (Spain). The electronic dendrometer Criterion RD1000 (Laser Technology Inc.) and the laser hypsometer TruPulse (Laser Technology Inc.) were used due to their accuracy and interoperability. The methodology was valid (unbiased and precise) measuring from a distance similar to the height of the tree. In this distance, statistical criteria and plots based on the residuals showed no clear advantage in volume estimation with models fitted with data from destructive methods against models fitted with data from the proposed non-destructive technique. This methodology can be considered useful for individual volume estimation and for developing taper equations.