Spectroscopic characterization of copper(II) binding to the immunosuppressive drug mycophenolic acid

Mycophenolic acid (MPA) is a drug that has found widespread use as an immunosuppressive agent which limits rejection of transplanted organs. Optimal use of this drug is hampered by gastrointestinal side effects which can range in severity. One mechanism by which MPA causes gastropathy may involve a direct interaction between the drug and gastric phospholipids. To combat this interaction we have investigated the potential of MPA to coordinate Cu(II), a metal which has been used to inhibit gastropathy associated with use of the NSAID indomethacin. Using a range of spectroscopic techniques we show that Cu(II) is coordinated to two MPA molecules via carboxylates and, at low pH, water ligands. The copper complex formed is stable in solution as assessed by mass spectrometry and H-1 NMR diffusion experiments. Competition studies with glycine and albumin indicate that the copper-MPA complex will release Cu(II) to amino acids and proteins thereby allowing free MPA to be transported to its site of action. Transfer to serum albumin proceeds via a Cu(MPA)(albumin) ternary complex. These results raise the possibility that copper complexes of MPA may be useful in a therapeutic situation.

Organotellurium compounds for metal organic vapour phase epitaxy

The infra-red detector material cadmium mercury telluride can be grown by the technique of Metal Organic Vapour Phase Epitaxy using simple alkyl telluride compounds as the source of tellurium. New tellurium precursors are required in order to overcome handling and toxicity problems and to reduce the growth temperature in preparing the material. A range of diaryltellurium(IV) dicarboxylates and some 2-(2'-pyridyl)phenyl-tellurium(II) and tellurium(IV) monocarboxylates have been synthesised and characterised by infra-red, 13C N.M.R. and mass spectroscopy. Infra-red spectroscopy has been used to determine the mode of bonding of the carboxylate ligand to tellurium. Synthetic methods have been devised for the preparation of diorganotritellurides (R2Te3) and mixed diorganotetrachalcogenides (RTeSeSeTeR). A mechanism for the formation of the tritellurides based on aerobic conditions is proposed. The reaction of ArTe- with (ClCH2CH2)3N leads to tripod-like multidentate ligands (ArTeCH2CH2)3N which form complexes with the ions Hg(II), Cd(II), Cu(I), Pt(II) and Pd(II). Synthetic routes to aryltelluroalkylamines and arylselenoalkylamines are also reported. The crystal structure of 2-(2'-pyridyl)phenyltellurium(II) bromide has been solved in which there are six molecules present within the unit cell. There are no close intermolecular Te---Te interactions and the molecules are stabilised by short Te---N intramolecular contacts. The crystal structure of 2-(2'-pyridyl)phenylselenium(II)-tribromomercurate(II) is also presented. A study of the Raman vibrational spectra of some tellurated azobenzenes and 2-phenylpyridines shows spectra of remarkably far superior quality to those obtained using infra-red spectroscopy.

The chemistry of some organotellurium compounds

Tbe formation of Pd(TeR)n and (CuTeR)n from the reaction between telluroesters and Pd(II)or Cu(II) suggested that these organa­tellurium reagents may be useful precursors of RTe- ligands in reactions with transition-metal substrates. Also the formation of telluronium salts Me2RTeI- from the reaction between telluroesters and methyl iodide, together with the above, confirm the cleavage of -cõ-Te bonds rather than -C-Te bonds. The formation of a carboxylic acid from the toluene solution of a ditelluride d palladium(O) complex in the presence of light oxygen (from air) is demonstrated. When the solvent employed is p-xylene an aldehyde is formed.The reaction proceeds via the free radical, RTeO, with Pd(PPh3)4 as a catalyst.It has also been shown that the oxidation of aldehydes to carboxylic acids is catalysed by ditelluride. Spin trapping experiments with PhCH=N(O)But (phenyl-t-butyl-nitrone) have provided evidence that the oxidative addition of an alkyl halide (RX=Mei, BunBr, BusecBr, ButBr, BrCH2-CH=CHCH2Br, and Br(CH2)4Br) to diphenyltelluride and reductive elimination of CH3SCN from Ph2(CH3)Te(NCS) proceeds via radical pathways. A mechanism is proposed for oxidative addition which involves the preformation of a charge transfer complex of alkyl halide and diphenyltelluride.The first step is the formation of a charge transfer complex, and the initial product of the oxidative addition is a "covalent" form of the tellurium(IV)compound. When the radical R is more stable, Ph2TeX2 may be the major tellurium(IV)product. The reaction of RTeNa (R=p-EtOC6H4, Ph) with organic dihalides X2(CH2)n (n=1,2,3,4) affords telluronium salts (n=3,4; X=Cl, Br) the nature of which is discussed.For n=l (X=Br, I)the products are formulated as charge transfer complexes of stoichiometry (RTe)2(CH2).CH2X2• For n=2, elimination of ditelluride occurs with the formation of an alkene. Some 125’Te Mõssbauer data are discussed and it is suggested that the unusually low value of 6 (7.58 mm.s-1 ) for  p-EtO.C6H4.Te)2(cH2)cH2Br2 relates to removal of 5's electronsfrom the spare pair orbltal via the charge transfer interaction. 125Te Mossbauer data for (p-EtO.C6H4)Te(CH2)4Br are typical of a tellurium (IV) compound and in particular ∇ is in the expected range for a telluronium salt. The product of the reaction of Na Te (C6H4.OEt), with 1,3-dibromopropane is, from the Mössbauer data, also a telluronium salt.

Copper(II) complexes with unsymmetrical pentadentate ed3a-type diamino-tricarboxylate ligands. Crystal structures, configurational analysis and DFT study of complexes

The O–O–N–N–O-type pentadentate ligands H3ed3a, H3pd3a and H3pd3p (H3ed3a stands ethylenediamine-N,N,N′-triacetic acid; H3pd3a stands 1,3-propanediamine-N,N,N′-triacetic acid and H3pd3p stands 1,3-propanediamine-N,N,N′-tri-3-propionic acid) and the corresponding novel octahedral or square-planar/trigonal-bipyramidal copper(II) complexes have been prepared and characterized. H3ed3a, H3pd3a and H3pd3p ligands coordinate to copper(II) ion via five donor atoms (three deprotonated carboxylate atoms and two amine nitrogens) affording octahedral in case of ed3a3− and intermediate square-pyramidal/trigonal-bipyramidal structure in case of pd3a3− and pd3p3−. A six coordinate, octahedral geometry has been established crystallographically for the [Mg(H2O)6][Cu(ed3a)(H2O)]2 · 2H2O complex and five coordinate square-pyramidal for the [Mg(H2O)5Cu(pd3a)][Cu(pd3a)] · 2H2O. Structural data correlating similar chelate Cu(II) complexes have been used for the better understanding the pathway: octahedral → square-pyramidal ↔ trigonal- bipyramid geometry. An extensive configuration analysis is discussed in relation to information obtained for similar complexes. The infra-red and electronic absorption spectra of the complexes are discussed in comparison with related complexes of known geometries. Molecular mechanics and density functional theory (DFT) programs have been used to model the most stable geometric isomer yielding, at the same time, significant structural data. The results from density functional studies have been compared with X-ray data.

Nanostructured copper oxides and phosphates from a new solid-state route

Nanostructured copper containing materials of CuO, Cu3(PO4)3 and Cu2P2O7 have been prepared by solid-state pyrolysis of molecular CuCl2·NC5H4OH (I), CuCl2·CNCH2C6H4OH (II), oligomeric [Cu(PPh3)Cl]4 (III), N3P3[OC6H4CH2CN·CuCl]6[PF6] (IV), N3P3[OC6H5]5[OC5H4N·Cu][PF6] (V), polymeric chitosan·(CuCl2)n (VI) and polystyrene-co-4-vinylpyridine PS-b-4-PVP·(CuCl2) (VII) precursors. The products strongly depend on the precursor used. The pyrolytic products from phosphorus-containing precursors (III), (IV) and (V) are Cu phosphates or pyrophosphates, while non-phosphorous-containing precursors (VI) and (VII), result in mainly CuO. The use of chitosan as a solid-state template/stabilizer induces the formation of CuO and Cu2O nanoparticles. Copper pyrophosphate (Cu2P2O7) deposited on Si using (IV) as the precursor exhibits single-crystal dots of average diameter 100 nm and heights equivalent to twice the unit cell b-axis (1.5–1.7 nm) and an areal density of 5.1–7.7 Gigadots/in.2. Cu2P2O7 deposited from precursor (VI) exhibits unique labyrinthine high surface area deposits. The morphology of CuO deposited on Si from pyrolysis of (VI) depends on the polymer/Cu meta ratio. Magnetic measurements performed using SQUID on CuO nanoparticle networks suggest superparamagnetic behavior. The results give insights into compositional, shape and morphological control of the as-formed nanostructures through the structure of the precursors.

Exploring coordination-driven self-assembly with autonomous chemical robots

The work presented herein focused on the automation of coordination-driven self assembly, exploring methods that allow syntheses to be followed more closely while forming new ligands, as part of the fundamental study of the digitization of chemical synthesis and discovery. Whilst the control and understanding of the principle of pre-organization and self-sorting under non-equilibrium conditions remains a key goal, a clear gap has been identified in the absence of approaches that can permit fast screening and real-time observation of the reaction process under different conditions. A firm emphasis was thus placed on the realization of an autonomous chemical robot, which can not only monitor and manipulate coordination chemistry in real-time, but can also allow the exploration of a large chemical parameter space defined by the ligand building blocks and the metal to coordinate. The self-assembly of imine ligands with copper and nickel cations has been studied in a multi-step approach using a self-built flow system capable of automatically controlling the liquid-handling and collecting data in real-time using a benchtop MS and NMR spectrometer. This study led to the identification of a transient Cu(I) species in situ which allows for the formation of dimeric and trimeric carbonato bridged Cu(II) assemblies. Furthermore, new Ni(II) complexes and more remarkably also a new binuclear Cu(I) complex, which usually requires long and laborious inert conditions, could be isolated. The study was then expanded to the autonomous optimization of the ligand synthesis by enabling feedback control on the chemical system via benchtop NMR. The synthesis of new polydentate ligands has emerged as a result of the study aiming to enhance the complexity of the chemical system to accelerate the discovery of new complexes. This type of ligand consists of 1-pyridinyl-4-imino-1,2,3-triazole units, which can coordinate with different metal salts. The studies to test for the CuAAC synthesis via microwave lead to the discovery of four new Cu complexes, one of them being a coordination polymer obtained from a solvent dependent crystallization technique. With the goal of easier integration into an automated system, copper tubing has been exploited as the chemical reactor for the synthesis of this ligand, as it efficiently enhances the rate of the triazole formation and consequently promotes the formation of the full ligand in high yields within two hours. Lastly, the digitization of coordination-driven self-assembly has been realized for the first time using an in-house autonomous chemical robot, herein named the ‘Finder’. The chemical parameter space to explore was defined by the selection of six variables, which consist of the ligand precursors necessary to form complex ligands (aldehydes, alkineamines and azides), of the metal salt solutions and of other reaction parameters – duration, temperature and reagent volumes. The platform was assembled using rounded bottom flasks, flow syringe pumps, copper tubing, as an active reactor, and in-line analytics – a pH meter probe, a UV-vis flow cell and a benchtop MS. The control over the system was then obtained with an algorithm capable of autonomously focusing the experiments on the most reactive region (by avoiding areas of low interest) of the chemical parameter space to explore. This study led to interesting observations, such as metal exchange phenomena, and also to the autonomous discovery of self assembled structures in solution and solid state – such as 1-pyridinyl-4-imino-1,2,3-triazole based Fe complexes and two helicates based on the same ligand coordination motif.

Menires do Alto Algarve oriental : Lavajo I e Lavajo II (Alcoutim)

Neste trabalho apresenta-se o resultado das escavações realizadas respectivamente em 1998 e em 2001 nos núcleos de menires de Lavajo I e de Lavajo II, distanciados cerca de 250 m na direcção NNE e separados pelo pequeno vale do Lavajo. Os locais, actualmente, são intervisíveis, graças à implantação destacada no terreno: Lavajo I situa-se no topo de colina enquanto Lavajo II ocupa a linha de festo de uma encosta, conferindo ao local visibilidade tanto do lado sul como do lado norte. O conjunto de Lavajo I é constituído actualmente por três monólitos, todos de grauvaque: um, quase inteiro, de tendência fálica, é actualmente o maior menir de grauvaque conhecido em território português, atingindo o comprimento máximo de 3,14 m; outro, quase completo, fragmentado em três grandes blocos, possui formato estelar; o restante apresenta-se muito incompleto, dele se conservando apenas uma lasca da sua face frontal. É crível, no entanto, que pudessem existir mais monólitos, tendo em conta os abundantes fragmentos de grauvaque ali observados, quase todos com fracturas frescas. Todos os menires de Lavajo I se apresentam decorados, com destaque para o maior deles, o qual exibe complexa decoração estreitamente relacionada com a morfologia do suporte lítico. Apenas para este foi possível determinar o local de implantação, correspondente a um alvéolo de planta circular e fundo aplanado, parcialmente danificado pelos trabalhos realizados em 1994, que conduziram ao seu reerguimento, infelizmente feito de forma pouco cuidada e incorrecta, visto ter sido colocado no terreno em posição invertida. Seja como for, na zona culminante daquele pequeno cabeço, implantaram-se três menires decorados, os quais não podem ser vistos isoladamente, já que se articulariam directamente com o conjunto de Lavajo II, que se avista ao longe, do outro lado do pequeno vale do Lavajo e na linha de festo da encosta, da qual ocupa a parte média. Neste segundo local, identificaram-se quatro estelas-menir não decoradas, todas de grauvaque, das quais apenas uma, representada por fragmento de pequenas dimensões, se encontrava in situ. Foi, no entanto, possível reconstituir a posição relativa das restantes, através da escavação integral do respectivo alvéolo, correspondente a rasgo alongado, orientado Este-Oeste, aberto no substrato geológico, constituído por xistos do Carbónico Superior finamente folheados. Deste modo, é de concluir que as estelas menir se dispunham em linha, constituindo um painel lítico contínuo. No interior do alvéolo, recolheram-se diversos artefactos ali ritualmente depositados aquando da fundação do monumento, cuja tipologia indica o Neolítico Final, cronologia aliás compatível com a do conjunto megalítico de Lavajo I, tendo presente a iconografia patente nos menires. Muito embora não se conheça ainda suficientemente o padrão de povoamento da região no Neolítico Final, estes dois núcleos megalíticos podem ser interpretados como marcadores de territórios e/ou de espaços sagrados, sendo de destacar a existência, durante todo o ano, de água nas proximidades imediatas, recurso escasso e precioso, que propiciaria a horticultura. Por outro lado, a natureza das matérias-primas utilizadas na confecção dos artefactos encontrados (sílex, anfibolito), para além de outros materiais de circulação transregional muito mais alargada (fibrolite), evidencia a forte interacção destas populações tanto com o interior do Baixo Alentejo (Zona de Ossa/Morena), como com o litoral algarvio ou andaluz, compatível com estádio de desenvolvimento económico do final do Neolítico do sul peninsular. Numa vasta região, correspondente a todo o sotavento algarvio, onde o megalitismo não funerário era até agora totalmente desconhecido, os testemunhos ora estudados constituem, doravante, uma das expressões mais interessantes e significativas do Sudoeste peninsular.

Evaluación de la posición hioidea en radiografías de pacientes clase I, II y III esqueletales entre 9 y 18 años de edad registrados en el período 2012 y 2015, de un Centro Radiológico de la Ciudad de Cuenca

Objetivo: El objetivo del presente estudio descriptivo, fue evaluar la posición del hueso hioides en los diferentes patrones esqueletales de Clase I, II y III mediante el trazado cefalométrico del triángulo hioideo propuesto por Bibby y Preston, estableciendo diferencias entre cada clase esqueletal. Materiales y métodos: La muestra consistió en 161 radiografías cefálicas laterales digitales, correspondientes a individuos de ambos sexos (75 hombres y 86 mujeres), entre edades de 9 y 18 años, las mismas que fueron divididas en tres subgrupos (Clase I, clase II y clase III) de acuerdo a los ángulos ANB y APDI. Se determinó la posición anteroposterior, vertical y angular del hueso hioides mediante el trazado cefalométrico del triángulo hioideo siendo el mentón, la tercera vértebra cervical y el hueso hioides las estructuras anatómicas utilizadas para el trazado del mismo. Se obtuvieron medidas estándar para cada clase esqueletal. Resultados: Se observaron diferencias estadísticamente significativas en la medida de H-Rgn entre clase I y II y entre clase II y III (p<0,005). El valor del ángulo del plano hioidal presentó diferencias estadísticamente significativas entre clase I y III y entre clase II y III (p<0,005). Se evidenciaron diferencias estadísticamente significativas entre hombres y mujeres con clase I esqueletal en la medida H-Rgn (p<0,005). Conclusiones: La posición del hueso hioides varía en los diferentes patrones esqueletales. Sin embargo, su posición en relación a la columna cervical presenta menos variabilidad que su relación con la mandíbula

Relación cráneo cervical en pacientes clase I, II, y III esqueletal entre 9 y 18 años de edad, mediante radiografías cefálicas laterales de un centro radiológico de la ciudad de cuenca.

El objetivo de este estudio fue determinar la relación cráneo cervical en pacientes clases I, II y III esqueletal entre 9 y 18 años de edad, mediante radiografías cefálicas laterales de un centro radiológico de la ciudad de Cuenca, utilizando el análisis cráneo cervical propuesto por Rocabado. Materiales y métodos: Fueron analizadas 161 radiografías cefálicas laterales digitales, de ambos sexos, con edad promedio de 12.3 años (DE± 2.4). Se incluyeron radiografías de individuos con dentición mixta y permanente, sin tratamiento ortodóncico y en donde se observe hasta la sexta vértebra cervical. Fueron excluidas las radiografías de pacientes con mordida abierta, traumatismos maxilofaciales y radiografías de mala calidad. Las telerradiografías fueron analizadas mediante el programa cefalométrico Nemoceph NX, donde se determinó el patrón esqueletal mediante los ángulos SNA, SNB, ANB y APDI. La evaluación de la postura cervical, se realizó mediante el análisis cráneo cervical propuesto por Rocabado. Se obtuvo el índice de concordancia (ICC=0.94). Mediante estadística descriptiva se analizaron las relaciones entre variables usando la prueba de Chi cuadrado y T de Student. Resultados: Se encontró mayor rotación posterior de cráneo en clase I y II esqueletal, encontrándose diferencias estadísticamente significativas respecto al ángulo cráneo vertebral entre hombres y mujeres en individuos clase II esqueletal. Las mujeres presentaron mayor rotación posterior de cráneo a diferencia de los hombres. (p=0.004). En clase III se encontró una relación normal. El espacio suboccipital en las tres clases esqueletales se presento con normalidad. No se encontró diferencia significativa respecto a la edad. Conclusiones: La relación cráneo cervical se presenta con una tendencia a la rotación posterior de cráneo, influida fuertemente por el sexo del individuo. El espacio suboccipital es normal en clase I y II esqueletal y con tendencia al aumento en clase III.

Disfunción diastólica en pacientes con hipertensión arterial grado I - II Hospital José Carrasco Arteaga, Cuenca 2006

Estudio descriptivo realizado con el objetivo de determinar la prevalencia de disfunción diastólica en pacientes con hipertensión arterial grado I-III, en edades de 30-60 años; a través de ecocardiograma doppler pulsado de flujo transvalvular mitral, hospital José Carrasco Arteaga, Cuenca 2006. Los pacientes fueron 76 seleccioados por asignación secuencial. Resultados: la edad media de los pacientes fue de 51 +- 6 años; 61,3corresponde al sexo femenino; con un índice de masa corporal de 26 kg (talla)2; el 60con hipertensión grado I y 40grado II; 72,5presentó hipertrofia ventricular izquierda; la alteración diastólica fue de 86,3(grado I 85,4y grado II 87,5), con predominio de patrón de relajación retardada (58,8). Conclusiones: el 86,3de pacientes con hipertensión arterial presentan disfución diastólica; con mínima diferencia entre hipertensión grado I y II (85,4y 87,5); concluyendo que a mayor grado de hipertensión arterial menor porcentaje de patrón normal de función diastólica, al igual que a mayor tiempo de hipertensión arterial (mayor de 10 años) mayor grado de disfunción diastólica. El patrón de disfunción diastólica predominante en hipertensión arterial grado I y II fue el de relajación retardada; incluso independientemente del peso

Modern Computational Chemistry Methods for Prediction of Ground- and Excited-State Properties in Open-Shell Systems

The main goal of the research presented in this work is to provide some important insights about computational modeling of open-shell species. Such projects are: the investigation of the size-extensivity error in Equation-of-Motion Coupled Cluster methods, the analysis of the Long-Range corrected scheme in predicting UV-Vis spectra of Cu(II) complexes with the 4-imidazole acetate and its ethylated derivative, and the exploration of the importance of choosing a proper basis set for the description of systems such as the lithium monoxide anion. The most significant findings of this research are: (i) The contribution of the left operator to the size-extensivity error of the CR-EOMCC(2,3) approach, (ii) The cause of d-d shifts when varying the range-separation parameter and the amount of the exact exchange arising from the imbalanced treatment of localized vs. delocalized orbitals via the "tuned" CAM-B3LYP* functional, (iii) The proper acidity trend of the first-row hydrides and their lithiated analogs that may be reversed if the basis sets are not correctly selected.

Conceptos y prácticas de la actividad física que se reproducen en las clases sociales: aproximación desde el enfoque determinantes/ determinación social de la salud

El concepto de actividad física es concebido de diferentes formas. Mostrando que existen varios factores que afectan de manera directa e indirecta la percepción que los sujetos construyen entorno a él, generando así una aproximación a diferentes definiciones de la actividad física desde varias perspectivas y dimensiones, donde predomina una noción netamente biológica. Este estudio pretende analizar, como desde las clases sociales se concibe la actividad física en sus conceptos y prácticas considerando los modelos de determinantes y determinación social para la salud. Con fin de comprender como los autores de la literatura científica conciben la actividad física y la relación con las clases sociales, desde una perspectiva teórica de los determinantes sociales de la salud y la teoría de la determinación social, se realizó una revisión documental y análisis de contenido de los conceptos y prácticas de la actividad física que se han considerado en los últimos 10 años. Para ello se seleccionaron las bases de datos PubMed y BVS (Biblioteca Virtual de Salud) por sus énfasis en publicaciones de salud mundialmente. Mostrando que la actividad física es concebida dominantemente desde una perspectiva biológica que ejerce una mirada reduccionista. Las relaciones entre actividad física y las clases sociales están claramente establecidas, sin embargo, estas relaciones pueden discrepar teniendo en cuenta el concepto de clase social, el contexto y la orientación de los autores y las poblaciones objetos de estudio. Obteniendo como resultado que los estudios documentados, revisados y analizados muestran una clara tendencia al modelo de determinantes; no obstante, algunos estudios en sus análisis se orientan hacia el modelo de determinación social. En cuanto al concepto de clases sociales los autores consideran una combinación de factores culturales y económicos sin atreverse a adoptar un concepto específico.

Valor diagnóstico del pepsinógeno i/ii como biomarcador de lesiones pre-malignas y malignas gástricas: revisión sistemática

Antecedentes: El cáncer gástrico se diagnostica tardíamente. Sólo en países como Corea y Japón existen políticas de tamizaje, que se justificarían en cualquier país con alta prevalencia de cáncer gástrico como Colombia o Chile. El análisis del pepsinógeno sérico se ha propuesto para el diagnóstico de lesiones premalignas y malignas gástricas, por lo cual se pretende revisar sistemáticamente en la literatura el valor diagnóstico del cociente pepsinógeno I/II como marcador de lesiones premalignas y malignas gástricas. Metodología: Se revisó la literatura hasta septiembre del 2016 con palabras claves lesiones malignas, premalignas gástricas y pepsinógeno en las bases de datos PubMed, OVID, EMBASE, EBSCO, LILACS, OPENGRAY y Dialnet, artículos de prueba diagnóstica que evaluaran el cociente pepsinógeno I/II en relación con los hallazgos histológicos. Resultados: Se incluyeron 21 artículos conun total de 20601 pacientes, que demuestranuna sensibilidad entre13.7% - 91.2%, una especificidad entre 38.5% - 100%, un Valor Predictivo Positivo entre 6.3% - 100% y un Valor Predictivo Negativo entre 33.3% - 98.8%del cociente pepsinógeno I/II en relación con el diagnósticode lesiones premalignas y malignas gástricas. Conclusiones: Los valores del cociente pepsinógeno I/II disminuidos se relacionan con la presencia delesiones premalignas y malignas gástricas.Dado que tiene mejor especificidad que sensibilidad, en cuanto prueba para tamizaje, sería útil para la selección de pacientes que se beneficiaríande la EVDA. Se requieren más estudios de prueba diagnóstica para validar un punto de corte específico que pueda ser utilizado como valor estándar.

Optical absorption and EPR studies on tenorite mineral

Optical absorption and EPR studies of the mineral tenorite, a cupric oxide, which originated from Mexico and contains 54.40 wt% of CuO. EPR spectral results indicate two Cu(II) closely interacting ions to give a d2 type structure. The calculated spin Hamiltonian at Rt and LNT are g = 2.160 and D = 125 G . The intensity of resonance line is not the same in low and high field regions. The optical absorption spectrum is due to Cu(II) which three sets of energies indicating Cu(II) in two independent tetragonal C4v symmetry, in addition to d2 structure of octahedral coordination. The octahedral and tetragonal field parameters are compared with those reported for several other copper containing minerals.

Optical absorption near infrared and EPR studies of mottramite

Mottramite mineral originated from Tsumeb Corporation Mine, Tsumeb, Otavi, Namibia, is used in the present work. The mineral contains of vanadium and copper to the extent of 22.73% and 16.84% by weight respectively as V2O5 and CuO. An EPR study of sample confirms the presence of Cu(II) with g = 2.2. Optical absorption spectrum of mottramite indicates that Cu(II) is present in rhombic environment. NIR results are due to water fundamentals.