Maximizing the Use of Roadway Weather Information Systems: Final Report, TR-404, 1998

This project was proposed as Phase I of a 2-phase program to evaluate the present use of weather information by Iowa Department of Transportation (IaDOT) personnel, recommend revised procedures, and then implement the resulting recommendations. Midway through Phase I (evaluation phase) the FORETELL project was funded. This project is a multi-state venture that engages the National Weather Service (NWS) and the Forecast Systems Laboratory of the National Oceanic and Atmospheric Administration and proposes to supplant the current weather information-generation and distribution system with an advanced system based on state-of-the-art technologies. The focus of the present project was therefore refined to consider use of weather data by IaDOT personnel, and the training programs needed to more effectively use these data. Results of the survey revealed that two major areas - training of personnel on use of data from whatever source and more precise information of frost formation - are not addressed in the FORETELL project. These aspects have been the focus of the present project.

Service Correlation of the Traffic Simulator, HR-100, 1967

A study was undertaken by the Bituminous Research Laboratory of the Engineering Research Institute at Iowa State University, under the sponsorship of the Iowa Highway Research Board, project HR 100, to ascertain the effects of a number of characteristics and properties of asphaltic concrete mixes upon the service behavior of the mixes as evaluated by the Traffic Simulator and by field observations. The study included: Investigations of the relations, of gradation, fraction and resistance to wear of aggregates; of stability, cohesion, per cent voids and asphalt content: of a number of laboratory and field mixes to service behavior as indicated by the Traffic Simulator under various test conditions. Based upon the results of the tests and the relationships noted, tentative criteria for the Traffic Simulator test were devised, subject to verification by observations and measurements of field service behavior of the mixes.

Measurement of the specific heat and determination of the thermodynamic functions of relaxed amorphous silicon

The specific heat, cp, of two amorphous silicon (a-Si) samples has been measured by differential scanning calorimetry in the 100–900K temperature range. When the hydrogen content is reduced by thermal annealing, cp approaches the value of crystalline Si (c-Si). Within experimental accuracy, we conclude that cp of relaxed pure a-Si coincides with that of c-Si. This result is used to determine the enthalpy, entropy, and Gibbs free energy of defect-free relaxed a-Si. Finally, the contribution of structural defects on these quantities is calculated and the melting point of several states of a-Si is predicted

Structural Characterization of UHPC Waffle Bridge Deck and Connections, TR-614, 2014

The AASHTO strategic plan in 2005 for bridge engineering identified extending the service life of bridges and accelerating bridge construction as two of the grand challenges in bridge engineering. These challenges have the objective of producing safer and more economical bridges at a faster rate with a minimum service life of 75 years and reduced maintenance cost to serve the country’s infrastructure needs. Previous studies have shown that a prefabricated full-depth precast concrete deck system is an innovative technique that accelerates the rehabilitation process of a bridge deck, extending its service life with reduced user delays and community disruptions and lowering its life-cycle costs. Previous use of ultra-high performance concrete (UHPC) for bridge applications in the United States has been considered to be efficient and economical because of its superior structural characteristics and durability properties. Full-depth UHPC waffle deck panel systems have been developed over the past three years in Europe and the United States. Subsequently, a single span, 60-ft long and 33-ft wide prototype bridge with full-depth prefabricated UHPC waffle deck panels has been designed and built for a replacement bridge in Wapello County, Iowa. The structural performance characteristics and the constructability of the UHPC waffle deck system and its critical connections were studied through an experimental program at the structural laboratory of Iowa State University (ISU). Two prefabricated full-depth UHPC waffle deck (8 feet by 9 feet 9 inches by 8 inches) panels were connected to 24-ft long precast girders, and the system was tested under service, fatigue, overload, and ultimate loads. Three months after the completion of the bridge with waffle deck system, it was load tested under live loads in February 2012. The measured strain and deflection values were within the acceptable limits, validating the structural performance of the bridge deck. Based on the laboratory test results, observations, field testing of the prototype bridge, and experience gained from the sequence of construction events such as panel fabrication and casting of transverse and longitudinal joints, a prefabricated UHPC waffle deck system is found to be a viable option to achieve the goals of the AASHTO strategic plan.

Production of nanometric particles in radio frequency glow discharges in mixtures of silane and methane

The formation of silicon particles in rf glow discharges has attracted attention due to their effect as a contaminant during film deposition or etching. However, silicon and silicon alloy powders produced by plasma¿enhanced chemical vapor deposition (PECVD) are promising new materials for sintering ceramics, for making nanoscale filters, or for supporting catalytic surfaces. Common characteristics of these powders are their high purity and the easy control of their stoichiometry through the composition of the precursor gas mixture. Plasma parameters also influence their structure. Nanometric powders of silicon¿carbon alloys exhibiting microstructural properties such as large hydrogen content and high surface/volume ratio have been produced in a PECVD reactor using mixtures of silane and methane at low pressure (-1 Torr) and low frequency square¿wave modulated rf power (13.56 MHz). The a¿Si1¿xCx:H powders were obtained from different precursor gas mixtures, from R=0.05 to R=9, where R=[SiH4]/([SiH4]+[CH4]). The structure of the a¿Si1¿xCx:H powder was analyzed by several techniques. The particles appeared agglomerated, with a wide size distribution between 5 and 100 nm. The silane/methane gas mixture determined the vibrational features of these powders in the infrared. Silicon-hydrogen groups were present for every gas composition, whereas carbon¿hydrogen and silicon¿carbon bonds appeared in methane¿rich mixtures (R-0.6). The thermal desorption of hydrogen revealed two main evolutions at about 375 and 660¿°C that were ascribed to hydrogen bonded to silicon and carbon, respectively. The estimated hydrogen atom concentration in the sample was about 50%.

A semi-grand canonical Monte Carlo simulation model for ion binding to ionizable surfaces: proton binding of carboxylated latex particles as a case study

In this paper, we present a computer simulation study of the ion binding process at an ionizable surface using a semi-grand canonical Monte Carlo method that models the surface as a discrete distribution of charged and neutral functional groups in equilibrium with explicit ions modelled in the context of the primitive model. The parameters of the simulation model were tuned and checked by comparison with experimental titrations of carboxylated latex particles in the presence of different ionic strengths of monovalent ions. The titration of these particles was analysed by calculating the degree of dissociation of the latex functional groups vs. pH curves at different background salt concentrations. As the charge of the titrated surface changes during the simulation, a procedure to keep the electroneutrality of the system is required. Here, two approaches are used with the choice depending on the ion selected to maintain electroneutrality: counterion or coion procedures. We compare and discuss the difference between the procedures. The simulations also provided a microscopic description of the electrostatic double layer (EDL) structure as a function of p H and ionic strength. The results allow us to quantify the effect of the size of the background salt ions and of the surface functional groups on the degree of dissociation. The non-homogeneous structure of the EDL was revealed by plotting the counterion density profiles around charged and neutral surface functional groups.

Diagnostic and identification in situ of fungal pathogens in superficial mycosis

Fungi are divided in 3 groups in the field of medical mycology. The dermatophytes are filamentous fungi able to grow on keratinized tissues from human or animals. They are the main cause of superficial and cutaneous mycoses of the skin and its appendix (hair and nail). The yeasts, or dimorphic fungi, can be responsible of diverse types of infections (superficial to deep mycoses). The moulds include all Non-dermatophyte Filamentous Fungi (NDF). In medical mycology, the most representative moulds are Aspergillus spp., Fusarium spp. and Mucor spp. Diagnosis of mycosis is currently based on direct mycological examination of biological samples, as well as macroscopic and microscopic identification of the infectious fungus in culture assay. However, culture assays were found to remain sterile in roughly 40% of cases otherwise positive by direct mycological examinations. Additionally, results from culture assays are often difficult to interpret as various NDF are sometimes isolated. This thesis work is composed of three projects focusing on the development of new assays for direct in situ identification of fungi from dermatological samples. Part 1. A Polymerase Chain Reaction - Terminal Restriction Fragment Length Polymorphism assay (PCR-TRFLP) targeting the 28S rDNA was developed to identify dermatophytes and NDF in nails with suspected onychomycosis. This method is faster and more efficient than culture. It further enables the distinction of more than one agent in case of mixed infection. A fast and reliable assay for the identification of dermatophytes and NDF in onychomycosis was found to be highly relevant since onychomycosis with Fusarium spp. or other NDF are weakly responsive or unresponsive to standard onychomycosis treatments with oral terbinafine and itraconazole. Part 2. A nested PCR-sequencing assay targeting the 28S rDNA was developed to identify dermatophyte species in skin and hair samples. This method is especially suitable for tinea capitis where dermatophytes identification is critical for subsequently prescribing the adequate treatment. The challenge presented when performing direct PCR fungi identification in skin and hair differs from that seen in onychomycosis as small amount of material is generally collected, few fungal elements are present in the clinical sample and one dermatophyte among a dozen species must be identified. Part 3. Fusarium spp. is currently isolated from nails with a frequency of 15% of that of dermatophytes in the laboratory of Mycology of the CHUV (2005-2012). The aim of this work was to examine if the intensive use of terbinafine and itraconazole could be a cause of the high incidence of Fusarium nail infections. For that purpose, two different methods, specific PCR and TRFLP, were used to detect both Fusarium spp. and Trichophyton spp. in nails of previously treated or untreated patients. TRFLP assay was found to be less sensitive than classical PCR assays specifically detecting Fusarium spp. or Trichophyton spp. Independently of the detection method used, the prevalence of Fusarium spp. appears not to be higher in patients previously treated by oral standard treatment with terbinafine and azoles which are highly effective to fight Trichophyton spp. in nails. In many cases Fusarium sp. was detected in samples of patients not previously subjected to antifungal therapy. Therefore, these treatments do not appear to favor the establishment of Fusarium spp. after elimination of a dermatophyte in nail infection. - En mycologie médicale, les champignons sont classés en 3 groupes. Les dermatophytes sont des champignons filamenteux capables de se développer dans les tissus kératinisés des hommes et des animaux, ils représentent la principale cause des mycoses superficielles et cutanées de la peau et de ses appendices (ongles et cheveux). Les levures, ou champignons dimorphiques, peuvent être responsables de divers types d'infections (superficielles à profondes). Les moisissures incluent tous les champignons filamenteux non-dermatophytes (NDF), les Aspergillus spp., les Fusarium spp. et les Mucor spp. sont les principales espèces rencontrées. Le diagnostic d'une mycose est basé sur un examen mycologique direct des prélèvements biologiques ainsi que sur l'identification macroscopique et microscopique du champignon infectieux isolé en culture. Cependant, dans environ 40% des cas, l'identification de l'agent pathogène est impossible par cette méthode car la culture reste stérile, bien que l'examen direct soit positif. De plus, la croissance de moisissures et/ou autres contaminants peut rendre l'interprétation de l'examen difficile. Ce travail de thèse est composé de trois projets focalisés sur le développement de nouvelles méthodes d'identification des champignons directement à partir d'échantillons dermatologiques. Projet 1. Une méthode de Réaction en chaîne de polymérase couplée à du polymorphisme de longueur des fragments de restriction terminaux (PCR-TRFLP), en ciblant l'ADN ribosomal 28S, a été développée pour l'identification des dermatophytes et moisissures dans les ongles avec suspicion d'onychomycoses. Cette technique s'est avérée plus rapide et plus efficace que la culture, permettant l'identification de plusieurs champignons en même temps. Posséder une méthode d'identification rapide et fiable des dermatophytes et des NDF dans les onychomycoses a été jugée nécessaire du fait que les Fusarium et d'autres NDF sont peu ou pas sensibles aux traitements oraux standards à la terbinafine et à Γ itraconazole. Projet 2. Une PCR nichée couplée au séquençage d'un fragment de l'ADN ribosomal 28S a été développée afin de différencier les dermatophytes dans la peau et les cheveux. Cette méthode est particulièrement adaptée au cas de tinea capitis, où l'identification du dermatophyte est essentielle afin de prescrire le traitement adéquat. Le problème de l'identification du pathogène fongique dans les cheveux et la peau diffère des onychomycoses car de petites quantités sont prélevées chez les patients, peu d'éléments fongiques sont présents et il faut discriminer un dermatophyte parmi une douzaine d'espèces potentielles. Projet 3. Au laboratoire de Mycologie du CHUV, les Fusarium ont été isolé dans les ongles à une fréquence de 15% pour la période 2005-2012. Le but de ce travail était d'examiner si l'utilisation intensive de terbinafine et d'itraconazole pouvait être une des causes de la forte incidence des infections des ongles par Fusarium. A cet effet, deux méthodes ont été utilisées pour détecter à la fois Fusarium spp. et Trichophyton spp., la PCR spécifique et le TRFLP. Indépendamment de la méthode choisie, il en résulte que la prévalence des Fusarium η'apparaît pas liée à un traitement au préalable des patients avec de la terbinafine ou des azoles, thérapies très efficaces contre les Trichophyton spp. dans les ongles. De plus, il existe de nombreux cas où Fusarium était détecté chez des patients non traités.

EEG windowed statistical wavelet scoring for evaluation and discrimination of muscular artifacts

EEG recordings are usually corrupted by spurious extra-cerebral artifacts, which should be rejected or cleaned up by the practitioner. Since manual screening of human EEGs is inherently error prone and might induce experimental bias, automatic artifact detection is an issue of importance. Automatic artifact detection is the best guarantee for objective and clean results. We present a new approach, based on the time–frequency shape of muscular artifacts, to achieve reliable and automatic scoring. The impact of muscular activity on the signal can be evaluated using this methodology by placing emphasis on the analysis of EEG activity. The method is used to discriminate evoked potentials from several types of recorded muscular artifacts—with a sensitivity of 98.8% and a specificity of 92.2%. Automatic cleaning ofEEGdata are then successfully realized using this method, combined with independent component analysis. The outcome of the automatic cleaning is then compared with the Slepian multitaper spectrum based technique introduced by Delorme et al (2007 Neuroimage 34 1443–9).

Symmetric periodic orbits near a heteroclinic loop formed by two singular points and their invariant manifolds of dimension 1 and 2

In this paper we consider vector fields in R3 that are invariant under a suitable symmetry and that posses a “generalized heteroclinic loop” L formed by two singular points (e+ and e −) and their invariant manifolds: one of dimension 2 (a sphere minus the points e+ and e −) and one of dimension 1 (the open diameter of the sphere having endpoints e+ and e −). In particular, we analyze the dynamics of the vector field near the heteroclinic loop L by means of a convenient Poincar´e map, and we prove the existence of infinitely many symmetric periodic orbits near L. We also study two families of vector fields satisfying this dynamics. The first one is a class of quadratic polynomial vector fields in R3, and the second one is the charged rhomboidal four body problem.

Weakly linked binary mixtures of F = 1 87Rb Bose-Einstein condensates

We present a study of binary mixtures of Bose-Einstein condensates confined in a double-well potential within the framework of the mean field Gross-Pitaevskii (GP) equation. We re-examine both the single component and the binary mixture cases for such a potential, and we investigate what are the situations in which a simpler two-mode approach leads to an accurate description of their dynamics. We also estimate the validity of the most usual dimensionality reductions used to solve the GP equations. To this end, we compare both the semi-analytical two-mode approaches and the numerical simulations of the one-dimensional (1D) reductions with the full 3D numerical solutions of the GP equation. Our analysis provides a guide to clarify the validity of several simplified models that describe mean-field nonlinear dynamics, using an experimentally feasible binary mixture of an F = 1 spinor condensate with two of its Zeeman manifolds populated, m = ±1.

Weakly linked binary mixtures of F = 1 87Rb Bose-Einstein condensates

We present a study of binary mixtures of Bose-Einstein condensates confined in a double-well potential within the framework of the mean field Gross-Pitaevskii (GP) equation. We re-examine both the single component and the binary mixture cases for such a potential, and we investigate what are the situations in which a simpler two-mode approach leads to an accurate description of their dynamics. We also estimate the validity of the most usual dimensionality reductions used to solve the GP equations. To this end, we compare both the semi-analytical two-mode approaches and the numerical simulations of the one-dimensional (1D) reductions with the full 3D numerical solutions of the GP equation. Our analysis provides a guide to clarify the validity of several simplified models that describe mean-field nonlinear dynamics, using an experimentally feasible binary mixture of an F = 1 spinor condensate with two of its Zeeman manifolds populated, m = ±1.

Si3N4 single-crystal nanowires grown from silicon micro- and nanoparticles near the threshold of passive oxidation

A simple and most promising oxide-assisted catalyst-free method is used to prepare silicon nitride nanowires that give rise to high yield in a short time. After a brief analysis of the state of the art, we reveal the crucial role played by the oxygen partial pressure: when oxygen partial pressure is slightly below the threshold of passive oxidation, a high yield inhibiting the formation of any silica layer covering the nanowires occurs and thanks to the synthesis temperature one can control nanowire dimensions

Microstructure and magnetic properties of Ni50 Mn37 Sn13 Heusler alloy ribbons

The Heusler alloy Ni50 Mn37 Sn13 was successfully produced as ribbon flakes of thickness around 7-10 μm melt spinning. Fracture cross section micrographs in the ribbon show the formation of a microcrystalline columnarlike microstructure, with their longer axes perpendicular to the ribbon plane. Phase transition temperatures of the martensite-austenite transformation were found to be MS =218 K, Mf =207 K, AS =224 K, and Af =232 K; the thermal hysteresis of the transformation is 15 K. Ferromagnetic L 21 bcc austenite phase shows a Curie point of 313 K, with cell parameter a=0.5971 (5) nm at 298 K, transforming into a modulated 7M orthorhombic martensite with a=0.6121 (7) nm, b=0.6058 (8) nm, and c=0.5660 (2) nm, at 150 K

Enhancement of oxidation rate of a-Si nanoparticles during dehydrogenation

Oxidation of amorphous silicon (a-Si) nanoparticles grown by plasma-enhanced chemical vapor deposition were investigated. Their hydrogen content has a great influence on the oxidation rate at low temperature. When the mass gain is recorded during a heating ramp in dry air, an oxidation process at low temperature is identified with an onset around 250°C. This temperature onset is similar to that of hydrogen desorption. It is shown that the oxygen uptake during this process almost equals the number of hydrogen atoms present in the nanoparticles. To explain this correlation, we propose that oxidation at low temperature is triggered by the process of hydrogen desorption

From caging to rouse dynamics in polymer melts with intramolecular barriers: a critical test of the mode coupling theory

By means of computer simulations and solution of the equations of the mode coupling theory (MCT),we investigate the role of the intramolecular barriers on several dynamic aspects of nonentangled polymers. The investigated dynamic range extends from the caging regime characteristic of glass-formers to the relaxation of the chain Rouse modes. We review our recent work on this question,provide new results, and critically discuss the limitations of the theory. Solutions of the MCT for the structural relaxation reproduce qualitative trends of simulations for weak and moderate barriers. However, a progressive discrepancy is revealed as the limit of stiff chains is approached. This dis-agreement does not seem related with dynamic heterogeneities, which indeed are not enhanced by increasing barrier strength. It is not connected either with the breakdown of the convolution approximation for three-point static correlations, which retains its validity for stiff chains. These findings suggest the need of an improvement of the MCT equations for polymer melts. Concerning the relaxation of the chain degrees of freedom, MCT provides a microscopic basis for time scales from chain reorientation down to the caging regime. It rationalizes, from first principles, the observed deviations from the Rouse model on increasing the barrier strength. These include anomalous scaling of relaxation times, long-time plateaux, and nonmonotonous wavelength dependence of the mode correlators.